ADVANCE-GRP-EX Series - Scame SECTION: 1.2 Device that, used in conjunction with the I-DEVICE,...

transcript

32A (25A)

63A (45A)

16A-32A

ICEPI 10 ATEX 03C009

Ta -25 ÷ +60°C

A21 IP66 T90°CII 2D

Cod. 503.12586

380-415V

I-Device I-Remote

Device that, used in conjunction with theI-DEVICE, allows the remote transmissionof the socket status (missing phase orbreaking of one or more fuses).

An electronic device controls (Intelligence Device) the status ofthe interlocked socket, monitoring the electrical functionality:- operation of the signalling and control card is guaranteed even

when the load is not connected;

INDICATOR LIGHT ON - indicates that the fuses are not open and all the phasesare present;- indicates that the socket outlet is powered correctly;

INDICATOR LIGHT FLASHING - signals the interruption of one or more fuses;- signals the absence of a phase*;

INDICATOR LIGHT OFF- indicates that the socket outlet is not powered.

* for single-phaseproducts in the event ofphase/neutral loss ledsignaling appears off.

Rating on metalplate

Ergonomic knobwhich can bepadlocked inposition 0 and 1,manoeuvrable evenwith gloves

High-strengthmaterial withsuperior UV andchemicalresistance

Captive stainlesssteel closingscrews

Cover entirelyseparate from thebase for easyinstallation

Dual mechanicallock as required bythe ATEX Directive

Single-piecewaterproof gasket

Residual currentrelease trip units testpush button

Ample space foreasy wiring

Switch-disconnectorwith mechanical lockthat can beaccessorized withauxiliary contacts

Punched marks foreasy closure of thecover

BOTTOM VIEW

Module in high-temperatureresistant engineeringpolymer

Possible entry from bottom side (input-output also)

Self-centering punch marks to facilitate drilling

TOP VIEW

Possibility toassemblemicroswitch

Easily extractablebottom plate

Threaded metalinserts

Under-plate cablerunway

External wallfastening

ADVANCE-GRP-EX Series

TECHNICAL CHARACTERISTICS VERSION 125A

4mm2 - multipolar

10mm2 - multipolar

25mm2 - multipolar

50-95mm2 - stranded-unipolar50-75mm2 - stranded-unipolar

2,5mm2 - multipolar

6mm2 - multipolar

16mm2 - multipolar

25mm2 - multipolar

Socket outlets PlugsRatedcurrent (A)

Rated current (A)Single socket

Upper Lower

.2ADVANCE-GRP-EX Series

Rated current: 16A-32A-63A-125A

Rated voltage: 100÷690V~

Frequency: 50÷60Hz

Insulating voltage: 500/690V~

Self-extinguishing GW test: 960°C

Self-extinguishing UL94: V0

Switch-disconnectors:16A-32A-63A COMMAND Series125A Switch ABB OT 160

Fuse:16A-32A gG 10,3x38mm63A gG 22x58mm125A NH00

Colour: Grey RAL7037

ATEX Code: II 2D

Ex Protection type: Ex tD A21 IP66 T90°C Ta -25°C +60°C

Operating temperatureaccording to the reference standard: -25°C +60°C

Maximum permissiblesurface temperature: T90°C

Switched socket outlets withinterlock degree of Protection: IP66

Plugs - degree of Protection: IP66/IP67

Impact Resistance: IK10 (20J) - (24V 4J)

Switched socket outlets withinterlock material: Thermosetting (GRP)

CE certificate: Certificate ATEX: ICEPI 10 ATEX 030009 (125A)Certificate ATEX: IMQXXXXXX (16-32-63A)

Thermal magnetic protection Molded case circuit breaker125A: ABB Tmax T1B (16kA) with

thermal magnetic trip unit TMD (adjustable thermal threshold 0,7…1 x In fixed magnetic threshold 10 x In)

Maximum entry with cable glands

Wiring capacity of the terminals (mm2)WIRING OPERATIONS

CABLE ENTRY

TECHNICAL CHARACTERISTICS

With contactor

With switch-disconnector

With switch-disconnector and fuse

With fuse and switch-disconnector

With molded case circuit breaker withthermal magnetic trip unit

With molded case circuit breaker withthermal magnetic and residual currentrelease trip units

VERSIONS WITH MECHANICAL INTERLOCK

EN 61241-1Electrical apparatus for use

in the presence of combustible dust.Part 1: Protection by enclosures 'tD'.

EN 60309-1Plugs, socket outlets and couplers for industrial purposes.

Part 1: general requirements.

Part 2: dimensional interchangeability requirements for pinand contact-tube accessories of harmonised configurations.

EN 60309-4Plugs, socket-outlets and couplers for industrial purposes.

Part 4: Switched socket-outlets and connectors with or without interlock.

in the presence of combustible dust.Part 0: General requirements.

VERSIONS WITH ELECTRICAL INTERLOCK

Scame offers products suitable for installation into environmentsunder potential risk of explosion identified as Zone 22 and thatenter into the field of application for the ATEX Directive (EuropeanDirective 94/9/CE).

PRODUCTS FOR USE IN A POTENTIALYEXPLOSIVE ENVIRONMENT

REFERENCE STANDARDSSWITCHED INTERLOCKED SOCKET OUTLETS

Thermal-magnetic and Molded case circuit breakerresidual current protection: ABB Tmax T1B (16kA) with

thermal magnetic trip unit TMD(adjustable thermal threshold0,7…1 x In fixed magneticthreshold 10 x In) + residualcurrent release trip units RC221/1(adjustable residual current trip 0,03 - 0,1 - 3A and time limit for non-trip instantaneous)

Version with contactor Contactor CL09 GE POWER125A: CONTROL

Resistant LimitedResistance Resistant Limited

Resistance Resistant Resistant Resistant Resistant Resistant Resistant Resistant

Saline solution

Acids Bases SolventsMineral

raysConcentrated Diluted Concentrated Diluted Hexane Benzol Acetone Alcool

BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS

32A (25A)

63A (45A)

16A-32A

ICEPI 10 ATEX 03C009

Ta -25 ÷ +60°C

A21 IP66 T90°CII 2D

Cod. 503.12586

380-415V

I-Device I-Remote

Device that, used in conjunction with theI-DEVICE, allows the remote transmissionof the socket status (missing phase orbreaking of one or more fuses).

An electronic device controls (Intelligence Device) the status ofthe interlocked socket, monitoring the electrical functionality:- operation of the signalling and control card is guaranteed even

when the load is not connected;

INDICATOR LIGHT ON - indicates that the fuses are not open and all the phasesare present;- indicates that the socket outlet is powered correctly;

INDICATOR LIGHT FLASHING - signals the interruption of one or more fuses;- signals the absence of a phase*;

INDICATOR LIGHT OFF- indicates that the socket outlet is not powered.

* for single-phaseproducts in the event ofphase/neutral loss ledsignaling appears off.

Rating on metalplate

Ergonomic knobwhich can bepadlocked inposition 0 and 1,manoeuvrable evenwith gloves

High-strengthmaterial withsuperior UV andchemicalresistance

Captive stainlesssteel closingscrews

Cover entirelyseparate from thebase for easyinstallation

Dual mechanicallock as required bythe ATEX Directive

Single-piecewaterproof gasket

Residual currentrelease trip units testpush button

Ample space foreasy wiring

Switch-disconnectorwith mechanical lockthat can beaccessorized withauxiliary contacts

Punched marks foreasy closure of thecover

BOTTOM VIEW

Module in high-temperatureresistant engineeringpolymer

Possible entry from bottom side (input-output also)

Self-centering punch marks to facilitate drilling

TOP VIEW

Possibility toassemblemicroswitch

Easily extractablebottom plate

Threaded metalinserts

Under-plate cablerunway

External wallfastening

TECHNICAL CHARACTERISTICS VERSION 125A

4mm2 - multipolar

10mm2 - multipolar

25mm2 - multipolar

50-95mm2 - stranded-unipolar50-75mm2 - stranded-unipolar

2,5mm2 - multipolar

6mm2 - multipolar

16mm2 - multipolar

25mm2 - multipolar

Socket outlets PlugsRatedcurrent (A)

Rated current (A)Single socket

Upper Lower

Rated current: 16A-32A-63A-125A

Rated voltage: 100÷690V~

Frequency: 50÷60Hz

Insulating voltage: 500/690V~

Self-extinguishing GW test: 960°C

Self-extinguishing UL94: V0

Switch-disconnectors:16A-32A-63A COMMAND Series125A Switch ABB OT 160

Fuse:16A-32A gG 10,3x38mm63A gG 22x58mm125A NH00

Colour: Grey RAL7037

ATEX Code: II 2D

Ex Protection type: Ex tD A21 IP66 T90°C Ta -25°C +60°C

Operating temperatureaccording to the reference standard: -25°C +60°C

Maximum permissiblesurface temperature: T90°C

Switched socket outlets withinterlock degree of Protection: IP66

Plugs - degree of Protection: IP66/IP67

Impact Resistance: IK10 (20J) - (24V 4J)

Switched socket outlets withinterlock material: Thermosetting (GRP)

CE certificate: Certificate ATEX: ICEPI 10 ATEX 030009 (125A)Certificate ATEX: IMQXXXXXX (16-32-63A)

Thermal magnetic protection Molded case circuit breaker125A: ABB Tmax T1B (16kA) with

thermal magnetic trip unit TMD (adjustable thermal threshold 0,7…1 x In fixed magnetic threshold 10 x In)

Maximum entry with cable glands

Wiring capacity of the terminals (mm2)WIRING OPERATIONS

CABLE ENTRY

TECHNICAL CHARACTERISTICS

With contactor

With switch-disconnector

With switch-disconnector and fuse

With fuse and switch-disconnector

With molded case circuit breaker withthermal magnetic trip unit

With molded case circuit breaker withthermal magnetic and residual currentrelease trip units

VERSIONS WITH MECHANICAL INTERLOCK

in the presence of combustible dust.Part 1: Protection by enclosures 'tD'.

Part 1: general requirements.

Part 2: dimensional interchangeability requirements for pinand contact-tube accessories of harmonised configurations.

EN 60309-4Plugs, socket-outlets and couplers for industrial purposes.

Part 4: Switched socket-outlets and connectors with or without interlock.

in the presence of combustible dust.Part 0: General requirements.

VERSIONS WITH ELECTRICAL INTERLOCK

Scame offers products suitable for installation into environmentsunder potential risk of explosion identified as Zone 22 and thatenter into the field of application for the ATEX Directive (EuropeanDirective 94/9/CE).

PRODUCTS FOR USE IN A POTENTIALYEXPLOSIVE ENVIRONMENT

REFERENCE STANDARDSSWITCHED INTERLOCKED SOCKET OUTLETS

Thermal-magnetic and Molded case circuit breakerresidual current protection: ABB Tmax T1B (16kA) with

thermal magnetic trip unit TMD(adjustable thermal threshold0,7…1 x In fixed magneticthreshold 10 x In) + residualcurrent release trip units RC221/1(adjustable residual current trip 0,03 - 0,1 - 3A and time limit for non-trip instantaneous)

Version with contactor Contactor CL09 GE POWER125A: CONTROL

Resistant LimitedResistance Resistant Limited

Resistance Resistant Resistant Resistant Resistant Resistant Resistant Resistant

Saline solution

Acids Bases SolventsMineral

raysConcentrated Diluted Concentrated Diluted Hexane Benzol Acetone Alcool

BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS

A460460460460580580

B130130260260170170

C260260260260380380

E137137137137

181,5181,5

F313131313535

G198198198198310310

H114114244244150150

ADVANCE-GRP Series

VERSION 125A SOCKET DIMENSIONS

(Dimensions in mm) (Dimensions in mm)

Switch-disconnector Switch-disconnector and fuse Fuse and switch

Moulded case circuit breaker withthermal magnetic trip unit

Moulded case circuit breaker withthermal magnetic and residual

current release trip unitsContactor

ADVANCE-GRP Series

VERSION 16A-32A-63A SOCKET DIMENSIONS VERSION 16A-32A-63A BASES AND CONSUMER UNIT DIMENSIONS

A260260260260260

B130130130130130

C360365390390400

D280282282285286

E170175182189185

F164164164164164

G114,5114,5114,5114,5114,5

H7,757,757,757,757,75

I198198198198198

L3131313131

M2525252525

N33,533,533,533,533,5

VERSION579.5110579.5111579.5121579.5120579.5210579.5211

VERSION2P+E 16A3P+E 16A3P+N+E 16A2/3P+E 32A3P+N+E 32A2P+E 63A3P+E 63A3P+N+E 63A

A460460460460580580

B130130260260170170

C260260260260380380

E137137137137

181,5181,5

F313131313535

G198198198198310310

H114114244244150150

.2ADVANCE-GRP Series

VERSION 125A SOCKET DIMENSIONS

Switch-disconnector Switch-disconnector and fuse Fuse and switch

Moulded case circuit breaker withthermal magnetic trip unit

Moulded case circuit breaker withthermal magnetic and residual

current release trip unitsContactor

ADVANCE-GRP Series

VERSION 16A-32A-63A SOCKET DIMENSIONS VERSION 16A-32A-63A BASES AND CONSUMER UNIT DIMENSIONS

A260260260260260

B130130130130130

C360365390390400

D280282282285286

E170175182189185

F164164164164164

G114,5114,5114,5114,5114,5

H7,757,757,757,757,75

I198198198198198

L3131313131

M2525252525

N33,533,533,533,533,5

VERSION579.5110579.5111579.5121579.5120579.5210579.5211

VERSION2P+E 16A3P+E 16A3P+N+E 16A2/3P+E 32A3P+N+E 32A2P+E 63A3P+E 63A3P+N+E 63A

ADVANCE-GRP-EX Series - Scame SECTION: 1.2 Device that, used in conjunction with the I-DEVICE,...

Documents