Post on 02-Feb-2021
transcript
Procedia Engineering 130 ( 2015 ) 453 – 465
Available online at www.sciencedirect.com
1877-7058 © 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the organizing committee of ICPVT-14doi: 10.1016/j.proeng.2015.12.239
ScienceDirect
aUniversity of Strathclyde, 75 Montrose Street, Glasgow G1 1XJ, UK
Keywords:
E-mail address:
© 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer-review under responsibility of the organizing committee of ICPVT-14
CORE Metadata, citation and similar papers at core.ac.uk
Provided by Elsevier - Publisher Connector
https://core.ac.uk/display/82593958?utm_source=pdf&utm_medium=banner&utm_campaign=pdf-decoration-v1http://crossmark.crossref.org/dialog/?doi=10.1016/j.proeng.2015.12.239&domain=pdfhttp://crossmark.crossref.org/dialog/?doi=10.1016/j.proeng.2015.12.239&domain=pdf
454 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
1.1. Weld clad simulation review
455 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
456 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
457 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
458 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
pY.P.
babp PYPY
Y.P. a bpburst
ult. K
Kp eultburst
ra
bap ePYru a
RG.M.
RRR MG
R1 R2Rp
PA
mK
mKP eyy
A
K=R2/R1 m=Rp/R1
459 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
460 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
461 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
7.1. Material hardening
462 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
7.2. Assuming an idealised interface
463 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
464 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465
465 G. Benghalia and J. Wood / Procedia Engineering 130 ( 2015 ) 453 – 465