Post on 16-Mar-2020
transcript
>
Ventilation Air Conditioning RefrigerationHeating
PROVIDED BYHEINEN & HOPMAN
Inside22ºC
OUTSIDE35°C45°C
HUMIDITY90%40%
productsAxial fans - HuA and VLA fans
Our mission:To ensure you the
perfect climate indoors, regardless of theweather outside.
“ “
AxiAl fAns
With our wide range of fans, we can offer you the ultimate ventilation system for each situation. Our high quality fans are designed to with-stand all climate conditions. The fans comply with all requisite class and government regulations.
Option
The axial fans are available in different materials: - galvanized steel (standard) - primed and painted steel - marine corrosion-resistand aluminium - stainless steel The axial fans are used for the mechanical ventilation or areas such as engine rooms, cargo holds and pump rooms. The fans are available for both indoor and outdoor installations in standard formats or in special designs.
ATEX The fans can optionally be supplied in explosion-proof design.
Classification
• RMRS
• LES
• DNV-GL
• ABS
• BV
• RINA
HUA-s, HUA-l And VlA fAns
ApplicationThe high-performance HUA-S / HUA-L (medium pressure) and VLA (high pressure, with outlet guide vanes) axial fans convey clean and slightly dusty air. Made of a highly corrosion-resistant aluminum alloy, the impellers ensure high efficiency and low noise levels. 30 fan types are available with flow rates up to 225.000 m³/h and pressures up to 2,200 Pa. Comprehensive accessories and special designs allow easy adaptation to the most diverse requirements. Casing Made of steel, welded, with rolled flanges on both sides according to DIN 82330 and welded motor bracket. Optimal surface protection thanks to hot-dip galvanizing. Special coatings and casing thickness of 6 mm, 8 mm and 10 mm are available on request. HUA-S fans have a short casing. HUA-L fans have a long casing. The casings of the VLA type fans have outlet guide vanes. Casing orientation and direction of air delivery The standard direction of air delivery is impeller-motor. On request, the direction of air delivery for the fans can be changed in motor-impeller. impeller - HUA High-performance axial impeller. Hub and impeller blades made of a highly corrosion-
resistant aluminium alloy (sea-water-proof). Blades are adjustable at standstill. Easy-to-assemble shaft/hub connection. Dynamically balanced. impeller - VlA Impeller is infinitely adjustable at standstill. Aero-foil section blades made of high-tensile aluminium cast alloy DN 315-1120. DN 1250 with corrosion-resistant polygon hub. Easy-to-assemble shaft/hub connection with taper lock bush. High-strength hollow-profiled blades of sheet steel. Dynamically balanced.
Additional accessoiries
• Pair of mounting feet for floor or ceiling installation
• Inlet cone with protective grill• Protective grill• Counter flange galvanized standard
thickness (for connection to ducts, etc.)
• Counter flange shop-painted (for welding to constructions)
• Plain flange galvanized or shop-painted
• Flexible connection of synthetic fabric with two flanges
• Inspection door in fan casing optional starting from DN 500
• Anti-vibration mounting for vertical intallation
• Casing extenstion
To stand with our clients in the harshest environments
“ “
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
specifications HUA-s / HUA-l series
Medium pressure - Axial fan with direct drive HUA-S / HUA-L series, DN 250 - DN 1600
Size diameter
DN
Motor size
d0 D2 Lk x n x d L X max
L1 Weight (kg)
250 71-80 252 355 325x12x14 180 58 300 10-20
280 71-80 283 387 355x12x14 240 58 320 12-22
315 71-80 317 422 390x12x14 240 58 400 14-23
355 71-90 357 462 430x16x14 303 96 404 24-33
400 71-100 402 507 475x16x14 303 145 505 34-48
450 71-100 452 558 525x20x14 378 73 504 33-56
500 80-132 502 608 575x20x14 378 112 630 36-100
560 80-132 562 689 650x20x18 480 112 640 49-109
630 80-132 632 759 720x20x18 555 112 740 67-111
710 80-132 713 839 800x20x18 555 112 740 81-167
800 90-160 804 932 890x24x18 585 138 780 108-225
900 100-180 905 1032 990x24x18 675 154 900 144-287
1000 100-200 1005 1135 1090x28x18 675 193 900 171-401
1120 112-225 1128 1275 1230x28x24 810 91 1080 328-460
1250 132-280 1258 1411 1360x28x24 810 285 1080 410-903
1400 160-280 1410 1561 1510x32x24 1000 285 1670 485-978
1600 160-315 1610 1762 1710x36x24 1200 322 2000 545-1333Dimensions in mmWeight depending on motor size
HUA-S 250 - 1600 HUA-L 250 - 1600
d0LK
x n
x d
D2
L1
d0LK
x n
x d
D2
L X max
d0LK
x n
x d
D2
L X max
Air direction Air direction
Ø 250mm, HUA
2-pole [N = 2800 1/min] 4-pole [N = 1330 1/min]
Ø 280mm, HUA
2-pole [N = 2800 1/min] 4-pole [N = 1330 1/min]
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 315mm, HUA Ø 355mm, HUA
2-pole [N = 2830 1/min] 2-pole [N = 2875 1/min]
Ø 400mm, HUA
2-pole [N = 2890 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 450mm, HUA
2-pole [N = 2890 1/min] 4-pole [N = 1400 1/min]
Ø 500mm, HUA
2-pole [N = 2910 1/min] 4-pole [N = 1400 1/min]
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 560mm, HUA
2-pole [N = 2920 1/min] 4-pole [N = 1440 1/min]
Ø 630mm, HUA
2-pole [N = 2940 1/min] 4-pole [N = 1440 1/min]
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 710mm, HUA
2-pole [N = 2940 1/min] 4-pole [N = 1445 1/min]
Ø 800mm, HUA
2-pole [N = 1445 1/min] 4-pole [N = 964 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 900mm, HUA
4-pole [N = 1460 1/min]
Ø 1000mm, HUA
4-pole [N = 1465 1/min] 6-pole [N = 965 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 1120mm, HUA
4-pole [N = 1465 1/min] 6-pole [N = 970 1/min]
Ø 1250mm, HUA
4-pole [N = 1475 1/min] 6-pole [N = 975 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 1400mm, HUA
4-pole [N = 1475 1/min] 6-pole [N = 975 1/min]
Ø 1600mm, HUA
6-pole [N = 980 1/min] 8-pole [N = 730 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
specifications VlA series
Medium pressure - Axial fan with direct drive VLA series, DN 315 - DN 1250
Size diameter
DN
Motor size
d0 D2 Lk x n x d X max
L Weight (kg)
315 71-80 317 422 390x12x14 125 240 23-29
355 71-90 357 462 430x16x14 120 303 27-46
400 71-100 402 507 475x16x14 170 303 34-48
450 71-100 452 558 525x20x14 155 378 39-66
500 71-112 502 608 575x20x14 220 378 45-109
560 80-132 562 689 650x20x18 135 480 58-119
630 80-132 632 759 720x20x18 40 555 74-121
710 90-180 713 839 800x20x18 220 555 117-232
800 100-200 804 932 890x24x18 250 585 168-301
900 112-225 905 1032 990x24x18 290 675 221-417
1000 132-250 1005 1135 1090x28x18 325 675 320-531
1120 132-280 1128 1275 1230x28x24 190 810 402-575
1250 132-280 1258 1411 1360x28x24 320 1080 786-1210
L X max
d0LK
x n
x d
D2
Air direction
L X max
d0LK
x n
x d
D2
Air direction
160
VLA 315 - 1120 VLA 1250
Dimensions in mmWeight depending on motor size
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 315mm, VlA Ø 355mm, VlA
2-pole [N = 2875 1/min] 2-pole [N = 2885 1/min]
Ø 400mm, VlA
2-pole [N = 2890 1/min] 4-pole [N = 1400 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 450mm, VlA 2-pole [N = 2980 1/min] 4-pole [N = 1420 1/min]
Ø 500mm, VlA
2-pole [N = 2930 1/min] 4-pole [N = 1450 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 560mm, VlA
2-pole [N = 2940 1/min] 4-pole [N = 1440 1/min]
Ø 630mm, VlA
4-pole [N = 1445 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Ø 710mm, VlA
2-pole [N = 2935 1/min] 4-pole [N = 1450 1/min]
Ø 800mm, VlA Ø 900mm, VlA
4-pole [N = 1460 1/min] 4-pole [N = 1450 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 1000mm, VlA
4-pole [N = 1470 1/min]
Ø 1120mm, VlA
4-pole [N = 1475 1/min] 6-pole [N = 977 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
Ø 1250mm, VlA
4-pole [N = 1480 1/min] 6-pole [N = 980 1/min]
All indicated values for 400V/50Hz/3~. (60 Hz on request)
standard accessories HUA / VlA series
Size diameter
DN
d0 D2 D3 Lk x n x d L1 L2 L3 L5 Li1 Li2 T
250 252 355 381 325x12x14 120 165 120 30 8 18 42
280 283 387 415 355x12x14 120 165 80 40 8 18 42
315 317 422 471 390x12x14 120 165 160 40 8 18 42
355 357 462 519 430x16x14 120 165 101 40 8 18 42
400 402 507 565 475x16x14 120 165 202 40 8 18 42
450 452 558 636 525x20x14 120 165 126 40 8 18 42
500 502 608 689 575x20x14 170 165 252 50 8 18 52
560 562 689 710 650x20x18 170 165 160 60 8 18 52
630 632 759 732 720x20x18 170 185 185 60 8 18 52
710 713 839 886 800x20x18 220 185 185 70 9.5 22 52
800 804 932 1091 890x24x18 220 195 195 80 9.5 22 52
900 905 1032 1195 990x24x18 220 225 225 100 - 21 52
1000 1005 1135 1237 1090x28x18 320 225 225 100 - 21 66
1120 1128 1275 1370 1230x28x24 320 270 270 125 - 21 70
1250 1258 1411 1520 1360x28x24 320 270 270 125 - 21 70
1400 1410 1561 1690 1510x32x24 320 330 670 125 - 21 70
1600 1610 1762 1900 1710x36x24 320 400 800 125 - 46 70
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Z03 - Mounting foot Z08 - Counter flange For horizontal installation
Z05 - Wire grill Z07 - Wire grill ZG5 - Gauze grill
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Hh
h1
eii2
lb
d1d2
d
Lkxn
xd
(Typically two pieces per fan required)
D2 d0
L5 Lkxnxd
Lk
Li1
a
Lk
Li2
a
Lkxnxd
M
standard accessories HUA / VlA series
Size diameter
DN
a h h1 lb d d1 d2 H e i M i2
250 900 70 12 40 10.5 10.5 - 180 180 120 20 0
280 900 74 12 45 10.5 10.5 - 205 205 165 20 0
315 600 93.6 20 50 10.5 10.5 - 230 293 250 20 0
355 600 140 25 50 10.5 10.5 - 261 317 250 20 0
400 600 155 30 50 10.5 10.5 - 284 351 280 25 0
450 600 170 36 50 10.5 10.5 - 309 395 324 25 0
500 600 185 40 50 10.5 10.5 - 334 438 360 25 0
560 450 175 45 50 12.5 12.5 - 400 440 380 25 0
630 450 205 45 50 12.5 12.5 12.5 435 526 462 25 370
710 450 315 65 65 12.5 12.5 12.5 495 688 546 25 426
800 450 350 70 65 12.5 12.5 12.5 540 760 610 30 400
900 450 398 89 65 12.5 12.5 12.5 590 840 660 30 500
1000 450 398 80 65 16.5 16.5 16.5 642 930 730 30 500
1120 360 320 70 80 16.5 16.5 16.5 706 885 760 30 500
1250 360 300 70 80 16.5 16.5 16.5 733 986 786 30 500
1400 300 340 70 80 16.5 16.5 16.5 900 1008 768 30 0
1600 300 360 70 100 16.5 16.5 16.5 1000 1100 818 30 0
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Z10 - flexible connection ZAH - Casing extension HUA-s to HUA-l
Z54 - inlet cone with wire grill Z75 - Anti vibration mounting For vertical installation
Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
D2
L1 Lkxnxd
d0
L3 Lkxnxd
D2 d0
D2 d0 D3
L2 Lkxnxd T Lkxnxd
D2 d0
www.heinenhopman.com
Heinen & Hopman encourages a more
sustainable world. By providing eco-friendly solutions and serviceswe offer our clients
the option of reducing energy consumption
and thus co2 emissions.
AustriaT: +43 1720 1309E: info@drewsmarine.com
BrazilT: +55 213 587 4241/4244E: info@br.heinenhopman.com
CanadaT:+1 450 659 6571E: info@bronswerkgroup.com
france - la CiotatT: +33 4 4204 8685E: info@heinenhopmanfrance.com
france - AntibesT: +33 4 8902 4562 E: info@heinenhopmanfrance.com
GermanyT:+49 4073 1680E: info@drewsmarine.com
GermanyT:+49 471 9869 300E: info@moehringms.com
indiaT: +91 336 499 1293E: info@heinenhopmanindia.com
italyT: +39 018 745 7970E: info@it.heinenhopman.com
The netherlands (HQ)T: +31 33 299 2500E: info@heinenhopman.com
The netherlands - RotterdamT: +31 78 890 8050E: binnenvaart@heinenhopman.nl
norwayT: +47 6919 0900E: admin@teknotherm.no
Peoples Republic of ChinaT: +86 213 253 2896E: info@cn.heinenhopman.com
Peoples Republic of ChinaT: +86 510 8528 1763E: xue.han@teknotherm.no
PolandT: +48 914 331 800E: tmh@teknotherm.no
RomaniaT: +40 236 448 222E: office@ro.heinenhopman.com
RussiaT: +7 (4012) 308 801E: info@heinenhopman.ru
singaporeT: +65 6897 7879E: info@sg.heinenhopman.com
south KoreaT: +82 704 901 0000E: info@kr.heinenhopman.com
spainT: +34 932 259 668E: info@es.heinenhopman.com
swedenT: +46 3121 7500E: mats.uden@teknotherm.no
TurkeyT: +90 216 493 8118E: info@tr.heinenhopman.com
UAE - Abu dhabi T:+971 2550 4147E: info@caspuae.com
UAE - dubaiT: +971 4263 5453E: info@caspuae.com
UsA - seattle, Washington T: +1 206 632 7883E: jan@teknotherm-inc.com
UsA - fort lauderdale, floridaT: +1 954 463 0110E: info@arwmaritime.com
UsA - Houma, louisiana T: +1 985 876 7982E: leblanc@leblancandassociates.com
don’t hesitate to contact us for more information about Axial fans. Email us at sales@heinenhopman.com or call us at +31 33 299 2500
“
“