Post on 22-Jul-2016
description
transcript
2016PARTS | EQUIPPED/azonicUSAazonic.eu
BUILT FORPUNISHMENT
Azonicusa.com Azonic.eu
To create to a higher standard of excellence is what it’s all about.
For 25 years Azonic products have been pounded and punished by
the world’s fastest. Designing, developing and producing parts and
accessories that can take riders to new heights is more than just a
mission statement – it is the core of our being.
» WHEELSETS » PEDALS » HANDLEBARS » STEMS » SMALL PARTS
BUILT FOR PUNISHMENTTo create to a higher standard of excellence
is what it’s all about. For 25 years Azonic
products have been pounded and punished
by the world’s fastest. Designing, developing
and producing parts and accessories that
can take riders to new heights is more than
just a corporate mission statement – it is the
core of our being.
BUILT FORPUNISHMENT
AZONIC
WHEELSOUTCASTSIZES: 135mm, 26"AVAILABLE COLORS: White/black, red/black
FEATURES • Weight 135mm: 1790g (set) • 6000 Series Aluminum Rim • Stainless Steel Spokes • 7075 Aluminum Spoke Nuts and Cassette Body • Sealed Cartridge Bearings • Welded Joint Rim Technology: Welded joints on rims
allow for a balanced rim weight and eliminate the need for additional material
• Over-Length Spoke Nut Technology: Extra long spoke nuts allow for added strength and stiffness from hub to rim
• Tubeless Tire Compatible: Rims are compatible with standard tubes and all tubeless tire systems. Tubeless valves included
• Interchangeable Axle Options Front: Easily change the axle type to fit all industry standards, QR, 9mm, 15mm and 20mm
• Interchangeable Axle Options Rear: Easily change the axle type to fit all industry standards, QR, 10mm and 12mm
OUTCAST WHEELSETColor Part No.
Red/black 3203-000
White/black 3203-002 red/blackwhite/black
Azonic wheels are Built for Punishment, combining lightweight design with bomb-proof
components and build. We cater for all wheel
sizes, hub widths and axles with our universal
conversion kits. If you ride bikes and need wheels
we’ll have an option for you.
RIDER RILEY JENNER |PHOTO MARCIN BIALAS PHOTOGRAPHY |» |
WH
EELS
ETS
76
OUTLAW 26"SIZES: 135mm, 150mmAVAILABLE COLORS: Ano blue, ano red, ano green,
ano black, white/black
FEATURES • Weight: 135mm 2340g (set), 150mm 2362g (set) • Double-wall, welded, design rim with a wide profile for
extra strength and rigidity • 32 spoke construction for added strength and pedaling
efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R, 15mm & 20mm thru axles • Comes with conversion kit • 135mm & 150mm rear spacing
OUTLAW 29erAND 650BSIZES: 29" 135mm, 27.5" 135mm or 150mmAVAILABLE COLORS: Black
FEATURES — 29ER • Weight: 2270g (set) • Double-wall pinned rim • 32 spoke construction for added strength and pedaling
efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R, 20mm axle adaptor • Comes with conversion kit • 142mm rear wheel spacing • Disc only • 8/9 speed compatible
FEATURES — 650B • Weight: 135mm 2254g (set), 150mm 2276g (set) • Double-wall pinned rim • 32 spoke construction for added strength and pedaling
efficiency • 6061-T6 Aluminum rim construction • Front wheel converts from Q/R with a 15mm axle adaptor • Disc only
OUTLAW 26" WHEELSETColor Part No. 135mm 150mm
White/black 3200-8** 40 41
Ano black 3200-8** 00 01
Ano red 3200-8** 06 07
Ano blue 3200-8** 04 05
Ano green 3200-8** 02 03
OUTLAW 29ER & 650B WHEELSETType: Color Part No. 135mm 150mm
29er: black 3200-9** 05 —
650b: black 3200-8** 50 51
29er
650b
WH
EELS
ETS
77
AZONIC
BARS
The original Azonic handlebars in the 1990’s
set a new standard for the industry and our new
range carries on that original pioneering ap-
proach. Available in a variety of widths, sizes and
31.8 or 35mm (with our FAT35 range) we have a
bar for every type of riding.
RIDER JAKUB VENCL |» |
HA
ND
LEB
AR
S78
C.F.K. CArBONFAT35SIZES: 34.9mm, 785mm, 20mm RiseAVAILABLE COLORS: Carbon fiber/white
FEATURES • Super lightweight carbon handlebar • Available in 785mm • Weight: 203g • Clamp size: 34.9mm • 20mm rise, 5° upsweep, 8° bend • Classic matte carbon fiber woven finish
C.F.K. FAT35 HANDLEBARColor Part No. 785mm
Black/white 3002-3** 01
C.F.K. CArBONSIZES: 31.8mm, 750/ 770/ 790mm, 20mm RiseAVAILABLE COLORS: Carbon fiber/white
FEATURES • Super lightweight, carbon handlebar • Available in 750, 770 and 790mm • Weight: 194g (750), 202g (770) and 206g (790) • Clamp size: 31.8mm • 20mm rise, 5° upsweep, and 8° bend • Classic matte carbon fiber woven finish
C.F.K. HANDLEBARColor Part No. 750mm 770mm 790mm
White 3002-1** 00 01 03
white
HA
ND
LEB
AR
S
79
FLOW FAT35SIZE: 34.9mm, 785mm widthAVAILABLE COLORS: Black/red, red, blue, orange,
titanium, black/white, neon yellow, neon orange, neon green, raw
FEATURES • Double-butted 7050 T6 Aluminum • Clamp size: 34.9mm • Available in anodized and neon paint finishes • Marked for custom cut length • Weight: 350g • Width: 785mm • Rise: 18mm • Upsweep: 5° • Backsweep: 7°
FLOW FAT35 HANDLEBARColor Part No. 785mm
Red 3003-5** 02
Blue 3003-5** 03
Orange 3003-5** 04
Titanium 3003-5** 05
Black/white 3003-5** 06
Neon yellow 3003-5** 09
Neon orange 3003-5** 11
Neon green 3003-5** 10
Raw 3003-5** 12
t itanium
blk/red
blk/wht
blue
red
titanium
orange
neon yel
neon grn
neon org
flake red
flake blue
flake gold
raw
red
neon yel
blk/wht
raw
neon grn
neon org
blue
orange
HA
ND
LEB
AR
S80
FLOWSIZES: 31.8mm, 750 & 800mm, 1" or 2" RiseAVAILABLE COLORS: Black/red, red, blue,
orange, titanium, metalflake red, metalflake blue, metalflake gold, black/white, neon orange, neon green, raw
FEATURES • Double-butted 7050 T6 Aluminum • Clamp size: 31.8mm • Anodized with either a sandblasted or
metal flake paint finish • Marked for a custom cut length • Weight: anodized 350g; paint 365g • Width: 800mm or 750mm with either 1"
or 2" rise • Upsweep: 5° • Backsweep: 7°
FLOW 750mm & 800mm HANDLEBAR (Europe)Color EU No. 750,1" 750, 2" 800, 1"
Black/red 3003-*** 101 201 301
Red 3003-*** 102 202 302
Blue 3003-*** 103 203 303
Orange 3003-*** 104 204 304
Titanium 3003-*** 105 205 305
Metalflake red 3003-*** 106 206 306
Metalflake blue 3003-*** 107 207 307
Metalflake gold 3003-*** 108 208 308
Black/white 3003-*** 109 209 310
Neon yellow 3003-*** — — 309
Neon orange 3003-*** 110 210 311
Neon green 3003-*** 111 211 312
Raw 3003-*** 112 212 313
FLOW 750mm & 800mm BARS (USA)Color USA No. 750, 2" 800, 1"
Black/red Ano 3001-2** 10 20
Red Ano 3001-2** 15 25
Blue Ano 3001-2** 13 23
Orange Ano 3001-2** — 27
Gray Ano 3001-2** — 24
Flake red 3001-2** 12 22
Flake blue 3001-2** 11 21
blk/red
blk/wht
blue
red
titanium
orange
neon yel
neon grn
neon org
flake red
flake blue
flake gold
raw
HA
ND
LEB
AR
S
81
WOrLD FOrCeFAT35SIZE: 34.9mm, 18 or 36mm riseAVAILABLE COLORS: Black/red, black/white,
black/blue, black/neon yellow, black/neon green
FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 34.9mm • 780mm width for ultimate control • Marked for custom cut length • Weight: 350g • Upsweep: 3° • Backsweep: 9°
WOrLD FOrCe318SIZE: 31.8mm, 18 or 36mm riseAVAILABLE COLORS: Black/red, black/white,
black/blue, black/neon yellow, black/neon green
FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 31.8mm • 780mm width for ultimate control • Marked for custom cut length • Weight: 350g • Upsweep: 3° • Backsweep: 9°
black
blue
orange
red
titanium
flake blue
flake gold
blk/white
blk/white
flake red
blk/blue
blk/red
neon yel
neon yel
neon yel
neon grn
neon grn
blk/red
blk/blue
WORLD FORCE FAT35 HANDLEBARColor Part No. 18mm Rise 36mm Rise
Black/white 3000-7** 00 05
Black/red 3000-7** 01 06
Black/blue 3000-7** 02 07
Blk/neon yellow 3000-7** 03 08
Blk/neon green 3000-7** 04 09
WORLD FORCE 318 HANDLEBARColor Part No. 18mm Rise 36mm Rise
Black/white 3000-9** 00 05
Black/red 3000-9** 01 06
Black/blue 3000-9** 02 07
Blk/neon yellow 3000-9** 03 08
Blk/neon green 3000-9** 04 09
HA
ND
LEB
AR
S82
AGILeSIZES: 31.8mm, 780mm, 1" RiseAVAILABLE COLORS: Black, red, blue, orange,
titanium, metalflake red, metalflake blue, metalflake gold, neon yellow
FEATURES • Double-butted 6061 T6 Aluminum • Clamp size: 31.8mm • High polished finish and paint finish available • Ultimate control with 780mm width bars • Custom marked for a cut length • Weight: 375g polished; 390g paint • Width: 780mm with 1" rise • Upsweep: 5° • Backsweep: 8°
AGILE HANDLEBARColor Part No.
Black 3001-100
Red 3001-101
Blue 3001-102
Orange 3001-103
Titanium 3001-104
Metalflake red 3001-105
Metalflake blue 3001-106
Metalflake gold 3001-107
Neon yellow 3001-109
black
blue
orange
red
titanium
flake blue
flake gold
flake red
neon yel
HA
ND
LEB
AR
S
83
The original Azonic Shorty Stem was an
icon when it came out over 20 years ago.
Our 2015 line-up stays true to the founding
philosophy of being Built for Punishment.
Catering for 31.8 and 34.9mm (with our
FAT35 range) the range combines strength
and a lightweight design to let you focus on
the trail ahead.
AZONIC
StEmS
|« |RIDER JAKUB VENCL |PHOTO NORBERT SZÁSZ
STEM
S84
TerMINATOrDM FAT35SIZE: 34.9mmAVAILABLE COLORS: Black, red, blue,
neon yellow
FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 34.9mm bore diameter • 25 & 30mm extension • 70mm clamp width • 0° angle • Weight: 135g
TERMINATOR DM FAT35 STEMColor Part No. 35mm
Black 3076-1** 00
Red 3076-1** 01
Blue 3076-1** 02
Neon yellow 3076-1** 03
black neon yel lowblue
red
CLUBSIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,
orange
FEATURES • Direct mount stem • CNC Machined 6061 T6 Aluminum • 31.8mm bore diameters • Laser etched logos • 45-50mm extension • 0° rise • Weight: 150g
CLUB STEMColor EU No. USA No.
Black 3052-001 3050-200
Blue 3052-002 —
Red 3052-003 —
Orange 3052-004 —
blue redorange
black
STEM
S
85
THe rOCKFAT35SIZE: 34.9mmAVAILABLE COLORS: Black, blue, red, neon
yellow, aluminum raw
FEATURES • CNC Machined, 6061 T6 Aluminum • 34.9mm bore diameter • 45mm extension • 0° angle • Stack height: 40mm • Weight: 150g
THE ROCK FAT35 STEMColor Part No. 35mm
Black 3055-1** 00
Blue 3055-1** 01
Red 3055-1** 02
Neon yellow 3055-1** 04
Aluminum raw 3055-1** 05
black neon yel low raw red
blue
PreDATOrSIZE: 31.8mm, 50 or 60mm extensionAVAILABLE COLORS: Black, blue, red, neon
yellow, orange
FEATURES • Light and strong stem perfect for Enduro
riding • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 50 & 60mm extension • 40mm stack height • 5° angle • Weight: 113g
PREDATOR STEMColor Part No. 50mm 60mm
Black 3075-1** 00 05
Red 3075-1** 01 06
Blue 3075-1** 02 07
Orange 3075-1** 03 08
Neon yellow 3075-1** 09 10
black blue orange red
neon yel low
STEM
S86
rIOTSIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,
orange, neon yellow
FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 1 1/8 inch steerer clamps • 40mm extension • 38mm stack height • 0° rise • Weight: 195g (including screws) • Weight per screw: 6g
RIOT STEM (EUROPE)Color Part No. 31.8mm
Black 3053-0** 01
Blue 3053-0** 02
Red 3053-0** 03
Orange 3053-0** 04
Neon yellow 3053-0** 06
RIOT STEM (USA)Color Part No. 31.8mm
Black 3050-2** 10
black neon yel low orangered
blue
PLeASUreDOMeSIZE: 31.8mmAVAILABLE COLORS: Black, blue, red,
orange, aluminum raw
FEATURES • CNC Machined, 6061 T6 Aluminum • 31.8mm bore diameters • 50mm extension • 35mm stack height • 0° rise • Weight: 210g
PLEASURE DOME STEMColor EU No. USA No.
Black 3051-001 3050-230
Blue 3051-002 3050-231
Red 3051-003 3050-232
Orange 3051-004 —
Aluminum raw 3051-005 —
black blue red orange
raw
STEM
S
87
BAreTTAeVO FAT35SIZE: 34.9mm, 40mm or 50mm extensionAVAILABLE COLORS: Black, red, blue,
orange, neon yellow
FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 34.9mm bore diameters • 40mm and 50mm extension • 38mm stack height • 15° rise • Weight: 196g
BAreTTAII (eVO) SIZE: 31.8mmAVAILABLE COLORS: Black, red, blue,
orange, neon yellow
FEATURES • CNC Machined 6061 T6 Aluminum • Laser etched logos • 31.8mm bore diameters • 40mm extension • 38mm stack height • 15° rise • Weight: 196g
BARETTA EVO FAT35 STEMColor Part No. 40mm 50mm
Black 3050-*** 300 400
Blue 3050-*** 301 401
Red 3050-*** 302 402
Orange 3050-*** 303 403
Neon yellow 3050-*** 309 409
BARETTA II (EVO) STEMColor EU No. USA No.
Black 3050-200 3050-220
Blue 3050-201 3050-221
Red 3050-202 3050-222
Orange 3050-203 3050-223
Neon yellow 3050-206 —
blue
blue
red
red
neon yel low
neon yel low
orange
orange
black
black
STEM
S88
RIDERS BERND WINKLER & MARKUS SAURER |PHOTO NORBERT SZÁSZ |» |
STEM PREDATOR BLUE |» |
STEM
S
89
WOrLDFOrCe FLAT SIZE: One sizeAVAILABLE COLORS: Black, red
FEATURES • The ultimate flat pedal developed over 2
years with top riders • True concave platform acheived through
platform shape and pin height • CNC machined 6061 T6 Aluminum body • Strong 4130 chromo axle • Parallel ridges on inboard, outboard and
middle of body for additional grip • Perfect balance of weight, durability and
strength • Weight: 380g • Outboard + center bearings; Inboard
bushing, for long-life and smooth running • Spare pins and tool included
black redWORLD FORCE FLAT PEDALSColor Part No.
Black 3120-100
Red 3120-101
Our range of flat pedals has been developed
with riders to produce products than give 100%
confidence when hitting the most technical
and challenging of trails. From entry-level nylon
to top-of-the-range CNC platforms you’re
guaranteed never to lose your feet so you can
forget about your components and concentrate
on the riding.
AZONIC
PEDALS
PED
ALS
90
black
neon yel low
FLAT IrON SIZE: One sizeAVAILABLE COLORS: Black, neon yellow
FEATURES • Fatty pins for durability and use with
knobby shoes • Micro pins for decreased weight and
increased traction • Customize your pedals to your riding style
by using a mixture of pin configurations • Damaged pins can be removed from
either side of the pedal • 6061-T6 forged Aluminum body • 4130 Chromo axle • Oversized sealed outboard bearing with
additional internal bushing • Pin removal tool and spare pins included • Average weight: 345g/pair (385g with
pins/pair)
FLAT IRON PEDALSColor Part No.
Black 3056-900
Neon yellow 3056-901
BIGFOOT SIZE: One sizeAVAILABLE COLORS: Black, neon yellow
matte, aluminum raw
FEATURES • Premium flat pedal for MTB weighing in
at only 370g/pair • Great stability and contact with the bike
(120 x 110mm) • Great pedal clearance with a 12mm
profile • Outboard axle locking nuts for tension
adjustment and removing play • Forged and CNC machined 6061
Aluminum body which is lightweight, thin and strong
• Forged 4130 Aluminum Chromo axle • Dual IGUS bearings for smooth running • 32 grippy and durable pins • Contains 4 spare pins
BIGFOOT PEDALSColor Part No.
Black 3062-101
(Matte) Neon yellow 3062-103
Aluminum raw 3062-104
raw
black matte neon yellow
PED
ALS
91
WICKeD rL SIZE: One sizeAVAILABLE COLORS: Black, blue, orange,
red, silver
FEATURES • CNC machined extruded Aluminum • Double anodized and high-polish finish • Platform: 105 x 100mm; only 6.5-9mm
thin • DU/sealed bearings • CNC Chromo axle • Weight: only 310g/pair
WICKED RL PEDALSColor Part No.
Black 3059-200
Blue 3059-201
Orange 3059-202
Red 3059-203
Silver 3059-205
AMX/DMX PEDALSColor EU No. USA No.
Black 3057-111 3056-720
Blue 3057-112 3056-721
Orange 3057-113 3056-724
Red 3057-114 3056-723
Titanium 3057-115 3056-722black orange
blue
titanium
red
red orange blue
black
si lver
AMX/DMX SIZE: One sizeAVAILABLE COLORS: Black, blue, orange,
red, titanium
FEATURES • Removable pins and a wide non-slip
platform and an impressive variety of colors to choose from
• Extruded body with flat surface and no axle bulge
• CNC machined Aluminum • DU/sealed bearings • CNC Chromo axle • Platform: 105 x 95mm; thickness: 14-17mm • 16 super durable and removable steel pins • Weight: 420g with pins/pair
PED
ALS
92
KAMIKAZE PEDALSColor Part No.
Matte black 3064-100
Neon yellow 3064-101
Neon green 3064-102
Neon red 3064-103
Raw 3064-104
matte black neon grn raw neon org
neon yel
blue
black
KAMIKAZe SIZE: One sizeAVAILABLE COLORS: Matte black, neon
yellow, neon green, neon red, raw
FEATURES • Super thin (10mm) and super light
die-cast pedal • 105 x 101mm platform • Weight: 328g/pair • 4130 Chromoly, CNC machined, axle
with dual sealed bearings • Painted surface or RAW Version without
paint • 9 replaceable R9 steel pins per pedal
PEDALS KAMIKAZE RAW|» |
PED
ALS
93
AMerICANA SIZE: One sizeAVAILABLE COLORS: Matte black, red, blue,
orange, titanium, neon yellow
FEATURES • Versatile and durable flat pedal • Die-cast platform 105 x 93mm • 364g/pair • CNC machined, 4130 Aluminum Chromo
axle • Durable DU bushings, and dual-sealed
bearings, for maximum protection against the elements
• Painted and anodized finish • 32 replaceable R9 alloy pins: 16 per
pedal (8 per side) • 4 spare pins included
PUCKer UP SIZE: One sizeAVAILABLE COLORS: Black, red, blue,
orange
FEATURES • 20 replaceable pins • 1 sealed bearing and 1 DU bushing • Platform: 105 x 93mm; thickness: 16mm • Tough, painted surface • Weight: 516g/pair
AMERICANA PEDALSColor Part No.
Matte black 3063-101
Red 3063-102
Blue 3063-103
Orange 3063-104
Titanium 3063-105
Neon yellow 3063-107
PUCKER UP PEDALSColor EU No. USA No.
Black 3060-100 3056-750
Blue 3060-101 3056-751
Red 3060-102 3056-752
Orange 3060-103 3056-753
orange
matte black
blue
black
blueorangered
neon yel low red titanium
PED
ALS
94
SHOO-IN PEDALSColor EU No. USA No.
Black 3061-100 3056-760
White 3061-101 3056-761
Orange 3061-102 3056-763
Red 3061-103 3056-762
BLAZE PEDALSColor Part No.
Black 3065-101
White 3065-102
Red 3065-103
Neon green 3065-104
Neon yellow 3065-105
orange red
neon grnblack neon yel
white
black
white
red
SHOO-IN SIZE: One sizeAVAILABLE COLORS: Black, white, red,
orange
FEATURES • Chromo spindle • Loose ball bearings • Grippy, molded pins • Weight: only 322g/pair
BLAZe SIZE: One sizeAVAILABLE COLORS: Black, white, red,
neon green, neon yellow
FEATURES • Extremely durable, fiber-reinforced,
nylon flat pedal • Shares high-quality bearing and spindle
technology from the Azonic CNC pedals • Platform: 105 x 100mm; thickness: 16mm • Weight: 350g/pair • CNC machined, 4130 Aluminum Chromo
spindle • Durable DU bushings, and dual-sealed
bearings, provide maximum protection against the elements
• 24 durable and grippy, replaceable steel pins: 16 per pedal (8 per side)
PED
ALS
95
AZONIC SMALL
PARtS
|« |RIDER LUANA OLIVEIRA
AC
CES
SOR
IES
96
DrOP-IN rLTeLeSCOPIC SIZE: 30.9mm, 34.9mm, 31.6mmAVAILABLE COLORS: Black
FEATURES • Only 660g - (70g lighter than previous
version) • New micro adjustment and improved
dust seal • In-line saddle mount • Single tube seatpost with separate air
and oil system • Remote control handlebar-mounted lever • Adjustable air pressure • Made from CNC machined, 7050
Aluminum with laser etched logos • Available in 30.9. 31.6 and 34.9mm • Tube length: 330mm; travel: 110mm
DROP-IN RL SEATPOSTColor Part No. 30.9/34.9 31.6
Black 3600-2** 00 01
PIN IT SEATPOST (EUROPE)Color Part No. 27.2mm 30.9mm 31.6mm 34.9mm
Black 3610-1*** 001 002 003 004
Blue 3610-1*** 010 011 012 013
Red 3610-1*** 020 021 022 023
Orange 3610-1*** 030 031 032 033
PIN IT SEATPOST (USA)Color Part No. 27.2mm 30.9mm 31.6mm 34.9mm
Black 3033-2** 00 10 20 30
Blue 3033-2** 01 11 21 —
Red 3033-2** 02 12 22 —
Orange 3033-2** 03 13 23 —
redorangeblackblue
PIN IT SIZE: 27.2, 30.9, 31.6, 34.9AVAILABLE COLORS: Black, blue, red,
orange
FEATURES • 6061 T6 forged Aluminum • 2 bolt clamp • High polished finish • Laser etched logos • 350mm length • Available in 27.2, 30.9, 31.6 and 34.9mm • Weight: 290g
AC
CES
SOR
IES
97
GONZO CLAMP SIZE: 28.6mm, 31.8mm, 34.9mmAVAILABLE COLORS: Black, blue,
red, green, (ti) gray, orange
FEATURES • Made from forged and CNC
machined 6061-T6 Aluminum • Laser etched logos • Available in 28.6mm, 31.8mm
and 34.9mm • Weight: 35g
q/rCLAMP SIZE: 28.6mm, 31.8mm, 34.9mmAVAILABLE COLORS: Black, blue, red,
green, gray, orange
FEATURES • Seat clamp designed for both MTB
and BMX use • Strong and efficient clamp design • 7075 Aluminum construction • Sizes: 31.8mm and 34.9mm • Weight: 34g (31.8mm),
36g (34.9mm)
LOGO GrIP & rAZOrWIre GrIP SIZE: One sizeAVAILABLE COLORS: Gray, green, red,
copper (orange), purple, black, blue
FEATURES - LOGO GRIP • Thin recessed grip profile for maximum
feel • Anodized aluminum lock-on collars • Grip length: 130mm • Allen screws to tighten collars • Comes as grip set with collars and
plugs
FEATURES - RAZOR WIRE GRIP • Raised grip profile for a thicker grip
with sticky rubber • Anodized aluminum lock-on collars • Grip length: 130mm • Allen screws to tighten collars • Comes as grip set with collars and
plugs
GONZO SEAT CLAMP (EUROPE)Color EU No. 28.6 31.8 34.9
Black 3034-*** 300 100 200
Blue 3034-*** 301 101 201
Gray 3034-*** 304 104 204
Green 3034-*** 305 105 205
Orange 3034-*** 303 103 203
Red 3034-*** 302 102 202
GONZO SEAT CLAMP (USA)Color Part No. 28.6 31.8 34.9
Black 3033-1** 40 41 42
Blue 3033-1** 60 61 62
Ti Gray 3033-1** 90 91 92
Green 3033-1** 80 81 82
Orange 3033-1** 70 71 72
Red 3033-1** 50 51 52
Q/R SEAT CLAMPColor Part No. 31.8 34.9
Black 3033-1** 17 100
Blue 3033-1** 32 —
Red 3033-1** 26 —
Azonic Logo grip set
Razor Wiregrip set
LOGO GRIPS (USA)Color USA No. Logo
Orange 3019-0** 03
Red 3019-0** 02
Blue 3019-0** 01
Black 3019-0** 00
LOGO & RAZOR WIRE GRIPS (EU)Color EU No. Razor Logo
Gray 3300-*** 101 201
Green 3300-*** 105 205
Copper 3300-*** 104 204
Purple 3300-*** 102 202
Red 3300-*** 103 203
Blue 3300-*** 106 —
Black 3300-*** 100 200
razor: black
razor: blue
razor: red
logo: green
logo: purple
logo: gray
razor: copper
GONZO CLAMP 28.6 31.8 34.9BLACK 3033-140 3033-141 3033-142RED 3033-150 3033-151 3033-152BLUE 3033-160 3033-161 3033-162ORANGE 3033-170 3033-171 3033-172GREEN 3033-180 3033-181 3033-182TITANIUM 3033-190 3033-191 3033-192
AC
CES
SOR
IES
98
THRUST BOTTLE CAGEColor Part No.
Black 4120-100
Silver 4120-101
Neon yellow 4120-102
SPLATTerFeNDer SIZE: One sizeAVAILABLE COLORS: Black/white, black/
neon yellow, black/neon green
FEATURES • Mount front or rear • Universal fit for front and back: 8 holes • Comes with 4 zip ties (and 4 spares) • Polypropylene • Weight: 33g
THrUSTBOTTLe CAGe SIZE: One sizeAVAILABLE COLORS: Black, silver, neon
yellow
FEATURES • Bottle cage suitable for all frames • Standard bottle cage mount spacing • Flat section next to frame keeps bottle
stable • Additional flat tab on top of cage adds
extra stability • Steam-lined, tapered, low profile design
keeps the cage away from feet when not in use
• Laser-etched logos • Available in black, silver or neon yellow
black si lver neon yel low
SPLATTER FENDERColor EU No. USA No.
Black/neon grn 3080-100 3021-001
Black/neon yel 3080-101 3021-002
Black/white 3080-102 3021-000
MYSTerYFeNDer SIZE: One sizeAVAILABLE COLORS: Black, white, red,
orange
FEATURES • Mount front or rear • Universal fit for front and back: 8 holes • Comes with 4 zip ties (and 4 spares) • Polypropylene • Weight: 33g
MYSTERY FENDERColor Part No.
Black/white 3081-101
neon green neon yel low
white
AC
CES
SOR
IES
99
SPLATTerSADDLeFeNDer SIZE: One sizeAVAILABLE COLORS: Black/white,
black/fluo yellow, black/fluo green
FEATURES • Clips under your saddle to keep you
clean and dry, off or on road • Perfect balance of coverage and stream-
lined design - 110 (W) x 305 (L)mm • Supplied with 4 zip-ties • Stealth black and neon colors available • Fit-and-forget – tough polypropylene • Weighs only 20g
SADDLE FENDERColor Part No.
Black/fluo grn 3082-201
Black/fluo yel 3082-202
Black/white 3082-200 fluo greenwhitefluo yel low
UMMA GUMMACHAINSTAYPrOTeCTION SIZE: S: 250mm x 95mm, M: 250mm x
130mm, L: 250mm x 180mmAVAILABLE COLORS: Black/white, black/
neon yellow, black/neon green
FEATURES • Made from strong neoprene • Silicon anti-slip strips on the inside • S: 18g / 250 x 95mm • M: 29g / 250 x 130mm • L: 42g / 250 x 180mm
AZONICSTICKerS SIZES: 20 Pack Stickers or Die Cut
Stickers: 6", 18", 36"
UMMA GUMMA CHAINSTAY PROTECTIONColor Part No. S M L
Black/neon grn 3090-*** 100 101 102
Black/neon yel 3090-*** 200 201 202
Black/white 3090-*** 300 301 302
DIE CUT STICKERSColor Part No. 6" 18" 36"
Black 5055-*** 410 510 610
White 5055-*** 401 501 601
neon greenneon yel low
white
LARGEMEDIUM
SMALL
20pk St ickers:5010-115
AC
CES
SOR
IES
100
reCOILALLOY HUBS SIZES: Front; 32 hole, 36 hole or 29er,
Rear; 135mm, 150mm or29erAVAILABLE COLORS: Black, red, blue, green
FEATURES - FRONT HUB • 32 hole front hub converts from QR to
15mm and 20mm (THRU. Axle) • Comes with conversion kit • Axle: 9 x 108mm (QR Type) • P.C.D.: 58mm • F.T.F.: 60.4mm • Offset: 6mm • Pawls: 3 • Bearings: 2 • Weight: 236g
FEATURES - REAR HUB • 32 hole, 7075 Aluminum hub body • Converts from QR to 12mm x 135mm
bolt on axle • 3 pawl design with 25 engagement
points • Hub Material: Aluminum • Axle Material: 135mm CR-MO, 150mm
Aluminum • Axle 135mm: 10 x 145mm (QR Type) /
12mm (THRU. Axle) • Axle 150mm: 12mm (THRU. Axle) • P.C.D.: 58mm • F.T.F.: 135mm 58.4mm, 150mm 74.45mm • Offset: 7mm • Pawls: 3 • Bearings: 4 • Weight: 135mm; 430g, 150mm; 445g
reCOILALUMINUM AXLe SIZES: 12mm x 135mm
FEATURES • An astonishing 102g • Ultra lightweight T-7000 series Aluminum
for maximum strength and durability
MOMeNTUMAXLe SIZES: 12mm x 135mm
FEATURES • Perfect for any 12mm x 135mm bolt on
application or to just add strength to your current set-up
• Ultra strong 4130 Chromoly construction • 3/8 axle step down dropout • Weight: 136g
AXLe ADAPTOr SIZES: 15mm or 20mm
FEATURES • 15 mm thru. axle spacers • 20 mm thru. axle spacers
OUTLAWCONVerSIONKIT SIZES: 135mm, 150mm or 142mm, 157mm
FEATURES • Converts wheel spacing
RECOIL ALLOY FRONT HUBColor Part No. 32 Hole 36 Hole 29er
Black 3200-*** 814 007 915
Red 3200-*** 815 — —
Blue 3200-*** 820 — —
Green 3200-*** 821 — —
RECOIL ALLOY REAR HUBColor Part No. 135mm 150mm 29er
Black 3200-*** 816 818 916
Red 3200-*** 817 819 —
front: black front: green
front: red
front: blue
rear: black
rear: red
recoil : 3200-004
momentum: 3200-003
142mm: 3200-639, 157mm: 3200-640
135mm: 3200-637, 150mm:3200-63815mm: 3200-008 20mm: 3200-009
AC
CES
SOR
IES
101
BONANZA LeD LIGHT OUTPUT: 1600 lumenAVAILABLE COLORS: Black anodized
FEATURES • Our ultimate off-road night-riding light, or for those
riders who really want to see and be seen on the roads! • Black anodized CNC machined lightweight Aluminum
body with waterproof seals • Ideal for off-road night-rides with 1600 lumen from 4
powerful Cree LEDs • Mount on handlebars with versatile QR mount system • Compact remote battery pack (only 285g) which can
be stowed in a pack or fastened to the bike • Lightweight lamp unit: only 140g • 3 beam settings and strobe • Charger included for fast 5hr charge to full battery
from flat • Run time = 3.5 to 15hrs
BONANZA LED LIGHTColor Part No.
Black 3410-100
AZONIC
LED LIGHTSPHOTO OLLY TOWNSEND Cloud9Trails |» |
LIG
HTI
NG
102
BeNLeD LIGHT OUTPUT: 1200 lumenAVAILABLE COLORS: Black anodized
FEATURES • 1200 lumen front Cree LED light • Black anodized CNC machined
Aluminum body with waterproof seals • Mount on handlebars or helmet with versatile
QR mount system • Compact remote battery pack • Lightweight = 140g (+ 285g battery pack) • 3 beam settings and strobe • Recharger included for fast 5 hr charge to full
battery from flat • Run time = 3.5 to 15hrs
LArAMYLeD LIGHT OUTPUT: 850 lumenAVAILABLE COLORS: Black anodized
FEATURES • Anodized CNC machined Aluminum body with
waterproof seals • Ideal for off- road night-rides with 850 lumen
from the powerful Cree LEDs • Modes: High, Eco, Flash • Mount on handlebars or helmet with versatile
QR mount system • Super lightweight = only 61g (+ 281g battery
pack), perfect as a helmet light • Run time = 3.5 to 15hrs
BEN LED LIGHTColor Part No.
Black 3404-100
LARAMY LED LIGHTColor Part No.
Black 3902-001
LIG
HTI
NG
103
HOSSLeDLIGHT OUTPUT: 400 lumenAVAILABLE COLORS: Black anodized
FEATURES • 400 lumen white Cree LED light • Perfect Light Distribution (PLD) lens
technology • 4 settings: 400lm, 200lm, 100lm and 150lm
flash • Black CNC Aluminum machined housing
with waterproof seals • Integrated rechargeable battery with USB
connection • Lightweight: only 95g • Run time = 2-10hrs depending on setting • Available as single or in a pair with Sulu red
USB
LeD MOUNTS AVAILABLE OPTIONS: Bar/helmet mount, universal rubber strap, head strap
HOSS LED LIGHTColor Part No. Hoss Sulu Combo
Black 3403-*** 100 200
hoss / sulu
head strap universal strap
helmet/bar
hoss
GLC LeDLIGHT OUTPUT: 220 lumenAVAILABLE COLORS: Black
FEATURES • Compliant with German lighting legislation • STVZO for road legal use • 220 lumen • Li-ion battery giving up to 120hrs run-time • USB rechargeable (6hrs) • High quality and durable Aluminum and
ABS construction • Weight 135g
GLC LED LIGHTColor Part No.
Black 3903-100
LIG
HTI
NG
104
LITTLeJOe LeDLIGHT OUTPUT: 100 lumenAVAILABLE COLORS: Black or silver anodized
FEATURES • Powerful 100 lumen Cree LED white light • Perfect Light Distribution (PLD) lens
technology • 4 settings: 100lm, 50lm, 30lm and flash • Black CNC Aluminum machined housing
with waterproof seals • Integrated rechargeable battery with USB
connection • Lightweight: only 50g • Run time = 2-7hrs depending on setting • Available as single or in a pair with Sulu red
USB
ADAMLeDLIGHT OUTPUT: 200 lumenAVAILABLE COLORS: Black or silver anodized
FEATURES • 200 lumen white Cree LED light • Perfect Light Distribution (PLD) lens technology • 4 settings: 200lm, 100lm, 50lm and
90lm flash • Black CNC Aluminum machined housing with
waterproof seals • Integrated rechargeable battery with USB
connection • Lightweight: only 55g • Run time = 1-4.5hrs depending on setting • Available as single or in a pair with Sulu red
LITTLE JOE LED LIGHTColor Part No. Little Joe Sulu Combo
Black 3401-*** 100 200
Silver 3401-*** 101 —
ADAM LED LIGHTColor Part No. Adam Sulu Combo
Black 3402-*** 100 200
Silver 3402-*** 101 — adam / sulu
l itt le joe / sulu
adam: black adam: s i lver
l i tt le joe: s i lverl i tt le joe: s i lver
hoss
LIG
HTI
NG
105
BINGOLeDLIGHT OUTPUT: 140 lumenAVAILABLE COLORS: Black/silver
FEATURES • 140 lumen LED front light • Complies with STVZO German
legislation • Road legal cycling light • Tough waterproof ABS housing with
waterproof seals • Integrated rechargeable battery with
USB connection • Intelligent beam adjusts to surrounding
light conditions • Run time: 6-10hrs with battery charge
indicator • Smart Beam Technology adjusts beam
intensity to prevent blinding oncoming road users
• Available as single front or in a pair with Banjo rear
BONGOLeDLIGHT OUTPUT: 100 lumenAVAILABLE COLORS: Black/silver
FEATURES • 40 to 100 lumen LED front light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with water-
proof seals • Rechargeable "AAA" batteries supplied • Run time = up to 2hrs with battery charge
indicator • Available as single front or in a pair with
Banjo rear
BINGO LED LIGHTColor Part No. Bingo Banjo Combo
Black 3406-1** 00 01
BONGO LED LIGHTColor Part No. Bongo Banjo Combo
Black 3407-1** 00 01
bingo
bingo / banjo
bongo
bongo/banjo
LIG
HTI
NG
106
SULUUSBLeD LIGHT OUTPUT: 15 lumen front, 7 lumen rearAVAILABLE COLORS: Black, red or silver
anodized
FEATURES • Weighs only 25g. Size: 27mm diameter,
21mm height • 15 (front) and 7 (rear) lumen output • 3 setting: constant beam, long flashing
and rapid flash • Black Aluminum machined housing with
waterproof seals • Integrated rechargeable battery with
USB connection • Compact and lightweight • Integrated universal rubber quick-release
mount • Run time = 2.5hrs constant beam; 5hrs
flashing modes • Available as single white, single red, as a
combo with white and red
front: black rear: black
front: red rear: red
front: s i lver rear: s i lver
SULUBATTerYLeD LIGHT OUTPUT: 15 lumen front, 7 lumen rearAVAILABLE COLORS: Black, red or silver
anodized
FEATURES • Only 25g and 27mm diameter, 21mm
height • 15 (front) and 7 (rear) lumen output • 3 setting: constant beam, long flashing
and rapid flash • Black Aluminum machined housing with
waterproof seals • 2 x CR2032 batteries per light, easily
available after-market • Compact and lightweight • Integrated universal rubber quick-release
mount • Run time = 30hrs constant beam; 60hrs
flashing modes • Available as single white, single red, as a
combo with white and red SULU BATTERY LED LIGHTColor Part No. Front Rear Sulu Combo
Black 3400-*** 100 300 500
Silver 3400-*** 101 301 501
Red 3400-*** 103 303 —
front: black rear: black
front: red rear: red
front: s i lver rear: s i lver
integrated rubberquick-release mount
integrated rubberquick-release mount
SULU USB LED LIGHTColor Part No. Front Rear Sulu Combo
Black 3405-*** 200 400 600
Silver 3405-*** 201 401 601
Red 3405-*** 203 403 —
LIG
HTI
NG
107
BUNGA LeD LIGHT OUTPUT: 6 lumenAVAILABLE COLORS: Black
FEATURES • 6 lumen LED rear light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with waterproof seals • AAA batteries supplied • Run time = up to 45hrs
BANJO LeD LIGHT OUTPUT: 8 lumenAVAILABLE COLORS: Black
FEATURES • 8 lumen LED rear light • Complies with STVZO German legislation • Road legal cycling light • Tough waterproof ABS housing with waterproof seals • CR2032 batteries supplied • Run time = up to 50hrs
BUNGA LED LIGHTColor Part No.
Black 3409-100
BANJO LED LIGHTColor Part No.
Black 3408-100
AZONIC
PUmPHEADS
DV(ENTRY) MATERIAL: Injected ABS (on Riva)
INCLUDES: • Presta • Schrader • Dunlop • Thumb lock lever
LIG
HTI
NG
108
AZONIC
PUmPSDVA(MED-HIGH) MATERIAL: Injected compositeAluminum (on eASY)
INCLUDES: • Presta • Schrader • Dunlop • Clever Twin Head • Thumb lock lever
DVC(MEDIUM) MATERIAL: Injected composite(on Arco, Alluse & GO)
INCLUDES: • Presta • Schrader • Dunlop • Clever Twin Head • Thumb lock lever
SI(HIGH) MATERIAL: Aluminum (on Alluse& GO)
INCLUDES: • Presta • Schrader • Dunlop • Screw-in head
BIK
E PU
MPS
109
e-ASY DVAFLOOr PUMP PRESSURE: 12.4bar / 180psiAVAILABLE COLORS: Green
FEATURES • Beautifully designed heavy duty steel foot, barrel
and piston • Wood handle • 43"/130cm extra-long, premium-grade hose • Patented "Clever Head" with thumb lock lever fits
securely to Presta, Schrader and Dunlop valves • Long travel piston with reduced barrel diameter lowers
required pumping effort • Includes needle and cone chuck attachments • 180psi / 12.4bar max • High quality floor-mounted 6.5cm / 2.5" gauge - High
quality floor-mounted 6.5cm/2.5" gauge
E-ASY FLOOR PUMPColor Part No.
Green 3804-106
ALLUSe DVC /SI PUMP PRESSURE: 11bar / 160psiAVAILABLE COLORS: Black, neon yellow
FEATURES • Heavy duty steel foot, barrel and piston • Wood handle • DVC: 43"/130cm extra-long, premium-grade hose,
with patented “Clever Head” with thumb lock lever fits securely to Presta, Schrader and Dunlop valves
• SI: 43"/130cm extra-long, premium high quality aluminum-garde hose with screw-in head for the perfect connection
• Long travel piston with reduced barrel diameter lowers required pumping effort
• Includes needle and cone chuck attachments • 160psi / 11bar max • 6.4cm / 2.5" gauge
ALLUSE FLOOR PUMPColor Part No. DVC SI
Black 3802-1** 00 01
Neon yellow 3802-1** 03 —
DVC: black DVC: neon yellowSI head
BIK
E PU
MPS
110
ArCO DVCFLOOr PUMP PRESSURE: 16.5bar / 240psiAVAILABLE COLORS: Black, neon yellow
FEATURES • High quality ABS foot, steel barrel and piston • Soft Touch handle • 43"/130cm extra-long, premium-grade hose • Patented “Clever Head” with thumb lock lever fits
securely to Presta, Schrader and Dunlop valves • Long travel piston with reduced barrel diameter lowers
required pumping effort • Includes needle and cone chuck attachments • 160psi / 11bar max • High mounted 5cm / 2" gauge
ARCO FLOOR PUMPColor Part No.
Black 3801-100
Neon yellow 3801-101
black neon yellow
rIVA DVFLOOr PUMP PRESSURE: 11bar / 160psiAVAILABLE COLORS: Black, neon yellow
FEATURES • High quality ABS foot, steel barrel and piston • Soft Touch handle • 43"/130cm extra-long, premium-grade hose • Thumb lock lever fits securely to both Presta and
Schrader valves • Long travel piston with reduced barrel diameter lowers
required pumping effort • Includes needle and cone chuck attachments • 160psi / 11bar max • 5cm/2" gauge
RIVA FLOOR PUMPColor Part No.
Black 3800-100
Neon yellow 3800-101
black neon yellow anthrazite blue
BIK
E PU
MPS
111
B52 DIGITAL(SHOCK)HAND PUMP PRESSURE: 20.8bar / 300psiFITS: All shocks and forksAVAILABLE COLORS: Neon yellow
FEATURES • The ultimate shock pump with digital gauge • High quality, durable and lightweight
Aluminum barrel and handle • Non-scratch sealing head for accurate air
delivery and leakage prevention • Inflates to 300psi • Highly sensitive bleed valve for fine-tuning • Compatible with all leading shocks and forks • Compact design in stealth black anodized
finish
FOrTreSS(SHOCK)HAND PUMP PRESSURE: 20.8bar / 300psiFITS: All shocks and forksAVAILABLE COLORS: Neon yellow
FEATURES • Compatible with all rear shocks and forks • High-pressure up to 300psi / 20.8bar • 2-3psi micro-adjust button for fine-tuning • Non-scratch rubber sealing system • High quality Aluminum barrel and handle • Analogue gauge with aluminum housing for
clear and accurate pressure monitoring
B52 DIGITAL (SHOCK) HAND PUMPColor Part No.
Neon yellow 4011-001
FORTRESS (SHOCK) HAND PUMPColor Part No.
Neon yellow 4009-002
X1 (HP AND HV)HAND PUMP PRESSURE: HP: 8.3bar / 120psi, HV: 5.5bar / 80psiAVAILABLE COLORS: Black
FEATURES • High quality, durable and lightweight Aluminum barrel
and handle with tough plastic trim • Aluminum thumb lock and beveled adjuster for
secure valve connection • HP: High-Pressure capacity, inflating to 120psi /
8.3bar • HV: High-Volume capacity, inflating to 80psi / 5.5bar
in few strokes • Reinforced plastic barrel with dust cap to protect
when not in use • Compatible with Presta, Schrader and Dunlop valves • ONLY 120mm (55g) – the ultimate ultra-compact
lightweight design for weight-conscious riders • HP version also available in longer 185mm (80g)
version
X1 HAND PUMPType: Color Part No. XS SM
HV: Black 4010-1** — 02
HP: Black 4010-1** 00 01
BIK
E PU
MPS
112
MOSqUITO(HP AND HV)HAND PUMP PRESSURE: HP: 7bar / 100psi, HV: 5.5bar / 80psiAVAILABLE COLORS: Black, silver
FEATURES • Compact lightweight design for ease of stowing and
transporting • Durable and lightweight Aluminum barrel • Integrated extendable flex-hose with aluminum thumb
lock for secure valve connection • HV: High-Volume capacity, inflating to 80psi / 5.5bar
in few strokes • HP: High-Pressure capacity, inflating to 100psi / 7bar • Reinforced plastic barrel with dust cap to protect
when not in use • Compatible with Presta, Schrader and Dunlop valves
MOSQUITO HAND PUMPColor Part No. HV HP
Black 4001-0** 03 01
Silver 4001-0** 02 —
SR-71 HAND PUMPColor Part No. SM LG
HV: Black 4021-0** 01 02
HP: Black 4020-0** 01 02
hv: black hp: s i lver
eXXO HVHAND PUMP PRESSURE: 5.5bar / 80psiAVAILABLE COLORS: Black
FEATURES • Compact lightweight design • 2-tone soft-touch rubber handle which extends
and rotates through 90º into and T-handle for improved grip when inflating
• Durable and lightweight Aluminum barrel • Inflates to 80psi / 5.5bar • Reinforced plastic barrel with dust cap to
protect when not in use • Compatible with Presta, Schrader and Dunlop
valves
EXXO HAND PUMPColor Part No.
Black 4000-001
Sr-71 (HP AND HV)HAND PUMP PRESSURE: 9.8bar / 140psiAVAILABLE COLORS: Black
FEATURES • High pressure mini-pump – inflate to 140 PSI! • Compact lightweight design for ease of stow-
ing and transporting • Only 180mm length • Lightweight – only 85g • Smart valve for easy swapping between Presta,
Schrader and Dunlop • High quality CNC machined aluminum body • Plastic bracket included
BIK
E PU
MPS
113