Post on 16-Mar-2016
description
transcript
ENTRANCE PROTECTIONSYSTEMS
BUILT TO SERVE SPECIALTIESBASE
TABLE OF CONTENTSIntroduction & Mission Statement.......... 2Grid Series 700....................................... 3Mid-Profile Tread Series 500................... 4Low-Profile Tread Series 200.................. 5Mats Series 300...................................... 6Mats Series 400...................................... 7Grille (stainless steel) Series 800............ 8Reversible Grid Series 900...................... 9Mat-Tray Series 1000.............................. 10Colors, insert........................................... 11
BASE MISSION Our business is helping you, our customer,
keep buildings clean with Base Grid, Tread, Mat or
Grille entrance protection systems. All Base systems
are designed to collect dirt, mud and sand at the
entryway – and to help prevent tracking through the
interior of the building. To that end, we design and
manufacture the exact entry protection product best
suited to your building and application. We offer
company (custom orders welcome). Call us on your
next job. We appreciate the
opportunity to show you how
Base Specialties makes
a difference.
Ed Green, CEO
2
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
Photos at right show Base Grids, Treads, Mats and Grilles in a variety of entrance protection applications. Buildings include banks, libraries, schools, manufacturing
vinyl frame or surface mounted in a rubber tray.
BASE GRID SERIES GB-700 FOR HEAVY TRAFFIC AREAS
Helps keep buildings clean Strong – 1-3/4" deep I-beam cross sectionOur strongest entrance systemIdeal for heavy foot and cart traffic Use indoors and out – versatile in
most recess applications
The Base GB-700 Series has a rugged 1-3/4"
I-beam aluminum frame – most rugged and
durable entrance protection system in our
product line. An aluminum cross member
gridlock keeps the grid in place while vinyl
11 for insert types and colors.
SPECIFICATIONSSubject to change without notice
Material: 6063-T52 aluminum with various insert optionsDepth: Grid only; 1-3/4”Depth: Grid and frame (level base); 2”LEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 46% pre-consumer
1-1/2"
1/8"
1-3/4"
1-1/2"
1-3/4"
1/8"
1-1/2"
1/8"
1-3/4"
1-3/4"
1-1/2"
1/8"
1-1/2"1/8"
1-3/4"
GB-700 CARPET GB-701 VINYL
GB-702 POLY-BRUSH GB-704 VINYL ABRASIVE
GB-705 SERRATED ALUMINUM
1/8"1-1/2"
GRIDLOCK
CUSHION CUSHION
1-3/4"
CONCRETE
FRAME
FLOOR
2"
2"
1/4"
Recessed application includes optional
2" x 2" x 1/4" aluminum
frame
1-3/4" I-BeamBase Grid
3
Ideal forheavy traffic areas
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
1-3/4"
1-1/2"
1/8"
GB-706 SERRATED INSERT
3/4" Mid-ProfileBase Tread
1/8"
1-1/2"
3/4"5/8"
GB-500 CARPET
1/8"
1-1/2"
3/4"5/8"
1/8"
1-1/2"
3/4"5/8"
1/8"
1-1/2"
3/4"5/8"
1/8"
1-1/2"
3/4"5/8"
GB-501 VINYL
GB-502 POLY-BRUSH
GB-504 VINYL ABRASIVE
GB-505 SERRATED ALUMINUM
Recessed application requires use of aluminum frame illustrated at left. The frame helps create a clean installation with well defined edges and corners.
BASE TREAD SERIES GB-500 FOR MEDIUM TO HEAVY TRAFFIC AREAS Strongest tread – 3/4” mid-profile tread25% more surface wiping areaSmooth surface – less wheel bump
Use indoors and out – versatile in most recess applications
The Base GB-500 Series 3/4” Tread supports heavy
tread. 3/4” aluminum framework assures dimen-
sional stability and longevity. A vinyl hinge allows
the tread to be rolled up and moved for under-tread
runs the full width and length of each section and
page 11 for insert types and colors.
SPECIFICATIONSSubject to change without notice
Material: Corrosion-resistant 6063-T52 aluminum with various inserts fusion bonded to backing for durabilityThickness, overall: 3/4”Additional specs: 6063-T52 aluminum spaced 1-1/2” on center and connected with rubber hinges with 1/8” slotted holes for maximum drainageWeather resistance: Hinges and footpads remain flexibleRolling load: Up to 1,000 lbs./wheelLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 38.3% pre-consumer
1/8"1-1/2"
3/4"
CONCRETE
FRAME
FLOOR
1"
1"
1/4"
4
Heavyduty
vinyl hingeroll-up tread
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
1/2" Low-ProfileBase Tread
1/8"1-1/2"
7/16"3/8"
GB-200 CARPET
1/8"1-1/2"
7/16"3/8"
1/8"1-1/2"
7/16"3/8"
1/8"1-1/2"
7/16"3/8"
1/8"1-1/2"
7/16"3/8"
GB-201 VINYL
GB-202 POLY-BRUSH
GB-204 VINYL ABRASIVE
GB-205 SERRATED ALUMINUM
Recessed application requires use of aluminum frame illustrated at left. The frame helps create a clean installation with well defined edges and corners.
BASE TREAD SERIES GB-200 FOR MEDIUM TRAFFIC AREAS
Strong – 1/2” low-profile tread25% more surface wiping areaSmooth surface – less wheel bump Use indoors and out – versatile in
most recess applications
The Base GB-200 Series 1/2” Tread supports me-
mud, dirt and soilage. The rugged 1/2” aluminum
framework assures dimensional stability and
longevity, while the vinyl hinge allows the tread to
be rolled up and moved for under-tread cleaning. A
width and length of each section and provides a
insert types and colors.
SPECIFICATIONSSubject to change without notice
Material: Corrosion-resistant 6063-T52 aluminum with various inserts fusion bonded to backing for durabilityThickness, overall: 1/2”Additional specs: 6063-T52 aluminum spaced 1-1/2” on center and connected with rubber hinges with 1/8” slotted holes for maximum drainageWeather resistance: Hinges and footpads remain flexible.Rolling load: Up to 1,000 lbs./wheelLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1 point)Recycle content: 38.3% pre-consumer
1/8"1-1/2"
7/16"
CONCRETEFRAME
FLOOR
1-1/2"
1/2"
1/16"
5
Weather resistant
vinyl hingeroll-up tread
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
BASE MAT SERIES MB-300 FOR LIGHT TO MEDIUM TRAFFIC AREAS Dimensionally stable, popular
aluminum hinge for “roll-up” ease during maintenance Surface and recessed applications Ideal for exterior and interior entryways,
foyers, vestibules, etc.
Base Series 300 Mats are an economical barrier
The mats feature aluminum hinged framework with
cushioned supports at the bottom of each segment.
All Base Mats facilitate cleanup — roll up and clean
beneath. See page 11 for insert types and colors.
SPECIFICATIONSSubject to change without notice
Material: Corrosion-resistant 6063-T52 aluminum with various insert optionsThickness: Mat only; 3/8”Depth: Mat and frame (level base); 7/16”Frame options: Surface mount ramp or recessed frameAdditional specs: Aluminum hingesLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 49% pre-consumer
Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer for surface applications, (2) aluminum hinge mat 2” on centers, (3) 2” x 3/8” spacer for recess applications and (4) 1” x 7/16” aluminum frame for recess applications. Both vinyl spacers are available with and without under-mat tongues (illustrated on ta-pered ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is available in place of vinyl ramp-spacer.
CUSHION CUSHION
CUSHION CUSHION
CUSHION CUSHION
CUSHION CUSHION
CUSHION CUSHION
MB-304 VINYL ABRASIVE
MB-305 SERRATED ALUMINUM
MB-300 CARPET
MB-302 POLY-BRUSH
MB-301 VINYL
3/8" Low-ProfileBase Mat
Aluminum hinge
6
Weather resistant roll-up mat
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
BASE MAT SERIES MB-400 FOR LIGHT TO MEDIUM TRAFFIC AREAS Dimensionally stable, quiet
vinyl hinge for roll up ease during maintenance Surface and recessed applications Ideal for exterior and interior entryways,
foyers, vestibules, etc.
Base Series 400 Mats are an economical barrier for
mats feature vinyl hinged framework with cushioned
supports at the bottom of each segment. All Base
Mats facilitate cleanup — roll up and clean
beneath. See page 11 for insert types and colors.
SPECIFICATIONSSubject to change without notice
Material: Corrosion-resistant 6063-T52 aluminum with various insert optionsThickness: Mat only; 3/8”Depth: Mat and frame (level base); 7/16”Frame options: Surface mount ramp or recessed frameAdditional specs: Rubber hingesLEED: Possible LEED-NC credits; MR credit 4 (1-2 points); MR credit 5 (1-2 points); IEQ credit 5 (1-point)Recycle content: 49% pre-consumer
Base Mat system shows (1) tapered 2” x 3/8” vinyl ramp-spacer for surface applications, (2) vinyl hinge mat 2” on centers, (3) 2” x 3/8” spacer for recess applications and (4) 1” x 7/16” aluminum frame for recess applications. Both vinyl spacers are available with and without under-mat tongues (illustrated on tapered ramp-spacer 1). A 1-3/8” x 3/8” aluminum ramp is available in place of vinyl ramp-spacer.
MB-404 VINYL ABRASIVE
MB-405 SERRATED ALUMINUM
MB-400 CARPET
MB-402 POLY-BRUSH
MB-401 VINYL
3/8" Low-ProfileBase Mat
Vinyl hinge
7
Weather resistant roll-up mat
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
BASE GRILLE SERIES 800 STAINLESS STEEL
Look and feel of stainless steel Long-lasting entrance system3 heights: 3/8", 5/8", 9/8"
Durable welded constructionSupports foot and cart traffic
Base 800 Series Stainless Steel Grille systems make
Built to last, Base Grilles maintain a “like new”
look through the four seasons and throughout years
of service. Surface beams and cross struts are robot
welded at each intersection to assure longevity and a
positive appearance in your application.
Base Stainless Steel Grilles enhance building appearanceBase Grilles help keep buildings clean, cut floor maintenance costs and provide an aesthetic touch to any building. Dirt and soilage drop through the voids and concentrate in the grille re-cess. Custodians simply lift a grille section and vacuum up dirt and debris. Grilles have lockdowns — removal and replace-ment is easy. Available in three heights (3/8", 5/8" and 9/8").
8
SPECIFICATIONSSubject to change without notice
Material: Stainless steel with support bars spaced 1” apart for maximum load capacityConstruction: Surface wires .093” (2.4 mm) by 0.156” (4 mm) with 0.70” (1.8 mm) support bars spaced 1” (24mm) o.c. Spacing between rails shall be 0.140” (3.6 mm)Tread finish: Satin, stainless steelLEED: MR credits 4.1, 4.2 – recycled content; EQ credit 5
A
B
1/8"
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
L-frame available for recess applications – for use on all four sides of grille
3/8" Grille 5/8" Grille 9/8" Grille
Frame: A=1/2" / B=3/4" Frame: A=3/4" / B=3/4" Frame: A=1-1/4" / B=1-1/4"
BASE REVERS-A-GRIDSERIES 900 FOR HEAVY TRAFFIC AREAS
Reversible – flips top to bottom Long lasting – doubles grid lifeBuffed rubber wiper bars with raised
aluminum scraper stripsSupports foot and cart traffic
Base 900 Series Revers-A-Grid combines
absorbent buffed rubber wiper bars with raised
aluminum scraper strips – top and bottom. Grid can
be reversed – doubles mat life. Functions in surface
and recessed applications – indoors and out.
Insert colors: gray or black. See L4 frame option
(right) for recess application. B1 and B2 ramp
options (right) for surface applications. Connector
strip joins sections.
SPECIFICATIONSSubject to change without notice
Material: Alternating strips of scraper bars (aluminum) and wiper bars (buffed or unbuffed rubber) Design: Gray or black rubber wiper bars Depth: 15/32”LEED: Possible LEED-NC credits; MR credit 4 (1-2 points); IEQ credit 5 (1 point)Recycle content: 25% pre-consumer and 75% post-consumerSizes: Custom made to your specifications
Base Revers-A-Grid scrapes debris and absorbs moisture
REVERSIBLEfor long life
9
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
1-1/8"
7/16"
1/2"
1-1/2"
L4 frame available for recess applications – for use on all four sides of Revers-A-Grid
1/2"
1"
Connector strip (inverted “T”) joins sections – for use on traffic direction abutments
Colors
7/16"
1-3/8"
B2 aluminum ramp for surface applications
Gray Black
1-3/8"
CONCRETE
1-1/8"
7/16"
CONCRETE
FINISHEDFLOOR
L4 FRAME
1-1/8"
7/16"
Dimensions
Surface application
Shallow recess application
BASE MAT-TRAY SERIES 1000
Concentrates sand, mud, dirt in tray Helps prevent inside dirt tracking Makes clean-up simpleEasy surface applicationResidential and commercial
Base 1000 Series Mat-Tray concentrates dirt and
is quick and easy. Keeps soilage out of homes and
buildings. Tray perimeter is a 2" ramp – helps
maintain sure footing (no vertical edge). Tray has
bottom. Interior tray rectangle recess is 3/8". Accepts
Base Series 300 aluminum hinge inset mat (see
opposite page for insert types and colors).
SPECIFICATIONSSubject to change without notice
Base Mat-Tray helps keep sand, mud, dirt out of commercial buildings and fine homes
10
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
Vinyl Insert Colors
Poly-Brush Colors
Metal Colors
Vinyl Abrasive Colors
Carpet Insert Colors
Durable insert with scraping ribs
Deep pile polypropylene with cleaning bristles
Mill finish is standard. Optional colors are anodized for durability.
Slip-resistant insert surface provides traction and sound footing.
Heavy duty nylon carpet insert stands up to normal foot traffic – absorbs moisture and helps keep buildings clean
BASE METAL AND INSERT TREAD COLORSColors shown are printed approximations. For exact color match, request a sample
Carpet Insert Colors
11
BUILT TO SERVE SPECIALTIESBASE
866-391-6216www.base-spec.com info@base-spec.comP: 651-463-2273 F: 651-463-2320
BUILT TO SERVE SPECIALTIESBASE
525 First St., Farmington, MN 55024Toll-free: 866.391.6216Phone: 651.463.2273Fax: 651.463.2320E-mail: info@base-spec.comWeb: www.base-spec.com
ENVIRONMENTALLY FRIENDLY ENTRANCE PROTECTION SYSTEMS
Represented by: