BINNS & BERRYCRAWFORD SWIFT

Part of the CQMEGroup of Companies ABSOLUTE PRECISION MAKES ALL THE DIFFERENCE

BINNS & BERRYCRAWFORD SWIFT

www.ptgheavyindustries.com

PTG HEAVY INDUSTRIESVERSA TURN HOLLOW SPINDLE LATHE

PTG Deutschland GmbH (Europe)

Pilsener Straße 9, D-86199 AugsburgGermany

Tel: +49 821 908983 0Fax: +49 821 908983 20 Email: info@ptgltd.com

PTG Asia (Shanghai)

ShanghaiChina

Tel: +86 136 5181 9693Email: info@ptgheavyindustries.com

PTG Asia (Beijing)

BeijingChina

Tel: +86 136 0 1351260Email: info@ptgheavyindustries.com

Bulat Galeev (Russian Representative)

MoscowRussia

Tel: +7 903 109 09 23Fax: +7 903 109 09 23

Email: info@ptgheavyindustries.com

Francis Klein

IndiaKolkata 700 071

Tel: +91 33 221 719 26 / 27 / 28 / 221 715 41Fax: +91 33 221 715 40

E-mail: fkleinkol@francisklein.in

Wyatt Machine Tools International

USATel: +1 (804) 337-9433Fax: +1 (804) 769-3682

Email: phil.wyatt@ptgheavyindustries.com

CKB Corporation (Japan)

TokyoJapan

Tel: +81 3 3498 2131 Email: info@ptgheavyindustries.com

PTG Heavy Industries Ltd

Bays 5 & 6, Rosemount Works,

Huddersfi eld Road, Elland,

West Yorkshire, UK

HX5 0EE

Tel: +44 (0)1422 379 222

Fax: +44 (0)1422 379 122

Email: info@ptgheavyindustries.comHeavy Industries Limited.Registered in England and Wales. Registration No. 06594872

PTG Heavy Industries operate aquality management system which complies with the requirements of

BS EN ISO 9001;2008

001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 1-2 30/08/2012 20:15

BINNS & BERRYCRAWFORD SWIFT

BINNS & BERRYCRAWFORD SWIFT

THE VERSA TURN SERIESThe VERSA TURN series offers a modern concept in lathe design, which retains the traditional fl at bed confi guration, time proven as the optimum between ‘stability’, ‘capacity’ and ‘cost’.

The machine offered is a standard item of equipment manufactured in the United Kingdom and featured in our range of lathes that are in current and regular manufacture. Equipped for sliding, surfacing, contouring, and screw cutting operations by CNC control, the machine additionally meets the requirements for manual operations for turning and facing using power assisted Micro-Handwheel controls.

The clutchless Headstock, positioned between two 3/4 guideway beds, has a Siemens Digital AC Spindle Drive, rated at 80 kW (107 HP) with a 450 mm Spindle bore.

■ Y axis with +/- 100mm of travel for both 1st and 2nd carriage

■ Second carriage with Turret and extra wide, full across Saddle with extended single piece Cross slide

■ Heavy Duty, Interchangeable, Boring Bar Holder, 150-200mm (6-8”)for second carriage

■ Heavy duty chip conveyor to the full length rear of the machine

■ Powered Clamping of the Tailstock to the Machine Bed

■ Motorised Towing pin for Tailstock Positioning via CNC Control

■ Air-condition unit for electrical cabinet & CNC pendant

■ CNC “C” Axis with hydraulic disk brake giving 360,000 Continuous Path,+/- .01 Degree Accuracy supplied with a separate “C” axis drive

STANDARD EQUIPMENT& INSTALLATION SERVICE■ Installation supervision and machine start-up

■ Machine programming and operator training

■ Siemens 840 D switchable to MDI and manual control

■ Siemens 6FT series digital AC variable frequency servo drives

■ Siemens series digital AC variable frequency spindle drive motor

■ Siemens MMU pendant handwheel

■ Heidenhain Linear scale to X and Z axes

■ Spindle speeds, infi nitely variable, surface speed programming

■ Three range headstock with automatic range selection

■ Hardened and ground tool steel ways on X and Z axes

■ Ball screw drive for X1 and twin pinion drive for Z1 axis

■ Ball screw drive for X2 and Z2 axis

■ CE Safety Standard

■ Electric’s to suit your supply specifi cations

■ Stand alone IP 55 electrical enclosure

■ Jog button for spindle

■ Voltage spikes protection

■ Low lubrication indicator light on pendant

■ Sliding chip guard and sliding chuck guard

■ Full rear guarding

■ Surrounding coolant tray

■ Electric coolant pump and fi ttings

■ Set of foundation bolts for machine ordered

■ Warranty on parts and labour

■ 2 weeks training for 3 engineers

SPECIFICATIONSModel, Universal Versa Turn - 1000 x 9000

Swing over bed 1000 mm

Turning diameter 800 mm

Cross travel (X axis) 550 mm

Distance between centre Z1 9100 mm

Distance between centre Z2 3000 mm

Rapid traverse rate - Z axis 6000 mm/min

Rapid traverse rate - X axis 6000 mm/min

Spindle power 80 kW (107 Hp)

Spindle nose (front) DIN 55026

Spindle through bore 450 mm

Spindle speeds, infi nite 1.5 - 550 RPM

CNC control (Seven axis) Siemens 840 D

Turret Disc turret 8 position (4 live)

Chucks (2 off) 1000 mm Ø, 4 off 2 pc ,jaw

Dimensions (approx.) Width 2640 mm, Length 16,400 mm, Weight 44,000 Kg

PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE

001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 3-4 30/08/2012 20:15