Brass Architectural Collection Pendant 80, 2017

Brass Architectural Collection Pendant 80, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order

Ø 8

0 (3

.15”

)

Ø 62 (2.44”)

40 (1.

58”)

Bulb specifications Bulb specif icat ions 120V / 240VG9, 25W frosted halogen bulb260lm / 3000K

Product specificationsInput voltage: 120V / 240VMaximum wat tage: 25WDimmable: yesP80 Rod weight: ~1.5kg

Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.

Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.

Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.

Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af terwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.

Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.

Backplate

Mounting screws not included.5mm countersunk screw recommended.

5 (0.2”)

10 (0.39”)

Ø 10 (0.4”)

Ø 5

.2 (0.

19”)

48 (1.88”)

Ø 6

0 (2

.36”

)

Ø 1

11 (4.

37”)

Ø 30 (1.18”)

Ø 9

1 (3

.58”

)

45°

Brass Architectural Collection Pendant 150, 2017

Brass Architectural Collection Pendant 150, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order

Ø 1

50 (5.

91”)

Ø 62 (2.44”)

40 (1.

58”)

Bulb specifications Bulb specif icat ions 240VG9 40W frosted halogen bulb460 lm / 2800K

Bulb specif icat ions 120VG9 40W frosted halogen bulb350 lm / 2800K

Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP150 Rod weight: ~2.5kg

Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.

Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.

Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.

Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af terwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.

Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.

Backplate

Mounting screws not included.5mm countersunk screw recommended.

5 (0.2”)

10 (0.39”)

Ø 10 (0.4”)

Ø 5

.2 (0.

19”)

48 (1.88”)

Ø 6

0 (2

.36”

)

Ø 1

11 (4.

37”)

Ø 30 (1.18”)

Ø 9

1 (3

.58”

)

45°

Brass Architectural Collection Pendant 250, 2017

Brass Architectural Collection Pendant 250, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order

Ø 2

50 (9.

84”)

Ø 120 (4.72”)

40 (1.

58”)

Bulb specifications Bulb specif icat ions 240VE14, 40W opal halogen bulb350lm / 2800K

Bulb specif icat ions 120VE12, 40W opal halogen bulb350lm / 2800K

Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP20 rod weight: ~3.5kg

Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.

Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.

Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.

Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af aterwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.

Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.

Backplate

Mounting screws not included.5mm countersunk screw recommended.

5 (0.2”)

10 (0.39”)

Ø 10 (0.4”)

Ø 5

.2 (0.

19”)

48 (1.88”)

Ø 6

0 (2

.36”

)

Ø 1

11 (4.

37”)

Ø 30 (1.18”)

Ø 9

1 (3

.58”

)

45°

Brass Architectural Collection Pendant 350, 2017

Brass Architectural Collection Pendant 350, 2017Polished brass or polished nickel-plated brass Mouth blown opaline glassPendant rod length to order

40 (1.

58”)

Ø 120 (4.72”)

Ø 3

50 (13

.78”

)

Bulb specifications Bulb specif icat ions 240VE14, 40W opal halogen bulb350lm / 2800K

Bulb specif icat ions 120VE12, 40W opal halogen bulb350lm / 2800K

Product specificationsInput voltage: 120V / 240VMaximum wat tage: 40WDimmable: yesP20 rod weight: ~4.5kg

Pendant rod length to order with maximum rod length 2m.Please supply required drop length of f ix ture, measured from the cei l ing to bot tom f i t t ing at t ime of order.P lease al low 25mm tolerance of drop length.Avai lable with Ø 62mm or Ø 120mm ceil ing rose.

Cleaning InstructionsBefore cleaning, l ight ing f ix tures must be turned of f and unplugged from mains electr ic i ty. Whilst cleaning them please be ex tremely careful and use the white cot ton gloves provided in the product box.

Pol ished brass: As the i tem is unlacquered, i t natural ly oxidises (darkens). Upon touching the i tems without gloves, f inger pr ints are l ikely to occur and leave marks. Use a good quali ty brass cleaning l iquid and fol low the product instruct ions using the ex tra sof t dust cloth. Do not apply pressure on persistent marks. Remove them using repeated gent le motions and by reapplying the brass cleaning l iquid.

Pol ished nickel: Use a l ight ly damp sof t dust cloth and gent ly go over marks unt i l clean. Dry i t af aterwards with a sof t dust cloth. Make sure the product is completely dry before switching the electr ic i ty on.

Opaline glass: Remove the opaline glass sphere from the product. Using a l ight ly damp cloth, clean only the outside of the sphere and dry i t with a dry sof t dust cloth. Only put the glass sphere back on the product once i t is ful ly dry.

Backplate

Mounting screws not included.5mm countersunk screw recommended.

5 (0.2”)

10 (0.39”)

Ø 10 (0.4”)

Ø 5

.2 (0.

19”)

48 (1.88”)

Ø 6

0 (2

.36”

)

Ø 1

11 (4.

37”)

Ø 30 (1.18”)

Ø 9

1 (3

.58”

)

45°

Michael Anastassiades Ltd.50 Rochester Pl, London NW1 9JX, UKT +44 (0)20 7928 7527sales@michaelanastassiades.comwww.michaelanastassiades.com© 2019 Michael Anastassiades Ltd. All rights reserved.

Michael Anastassiades’ design phi losophy is to preser ve the inherent qual i t ies of given mater ial. Al l of our products are handmade and come in natural f inishes, exposed to the elements without any protect ive lacquers. We look at oxidisat ion as par t of a process that adds to the pat ina of an object, increasing beauty with t ime. We try our best for al l goods to leave our premises in pr ist ine condit ion, but sometimes products may arr ive with minor oxidisat ion marks.

Whilst every ef for t is made to ensure accurate representat ion of product colours, f inishes and dimensions, Michael Anastassiades Ltd reser ves the r ight to al ter these detai ls without not ice, in compliance with i ts own product ion needs, technological changes or in response to the current market needs. Colour swatches are for reference only; Michael Anastassiades Ltd cannot guarantee exact colour match for any product f inishes.

Al l designs are protected under copyr ight law. Michael Anastassiades holds the exclusive manufactur ing and distr ibut ion r ights wor ldwide. Copying wil l be prosecuted.