Post on 06-Oct-2020
transcript
76
Unipod by Jean Nouvel
OUT
77
The Unipod concept was created from collaboration between Jean Nouvel and Troll and is based on recreating the effect of natural light falling on plants, to project an allegorical play between light and shade. The stylized, pole-like profile of Unipod shies away from the heavy look of the much larger columns common in public lighting. The slant of the column gives it dynamism and enables it to come closer to the elements to be illuminated.
Poles
Unipod by Jean Nouvel
78
OUT
4 m6 m8 m
8 m
120º
120º
6 m8 m
120º
ø114ø114
ø114
ø114
Full range of public lighting luminaires, with a slightly slated column in a stylized profile. The sets of diffusers can be adjusted to various heights, either singly or in groups of two or three luminaires. The diffusers are crowned by an upper reflector which prevents unwanted light from being emitted.
Column
Made in steel and galvanized. Option for grey paint.Column Ø 114 mm.Base reinforced by welded plates. Tilted at 5º to the vertical.
The column has two doors for making connections and derivation options.
The upper part of the lighting column is crowned by a galvanized metal cap.
Columns are galvanized or painted with protective grey paint. Option for anti-graffiti treatment depending on local regulations (Please ask). Available heights:
- 4 meters (for fitting 1 luminaire)- 6 meters (for fitting up to 2 luminaires)- 8 meters (for fitting up to 3 luminaires)
Poles
79
800
200
400
300
2360
800
pernos M22 X 600
Nivel de suelo acabado
ø114
Unipod by Jean Nouvel
Luminaires
Lamps
Fitting
Made of machined and welded aluminum. The optics system wraps the bulb in high-reflecting, specular anodized aluminum to provide a symmetrical extensive beam. The diffusers are crowned by an upper reflector which prevents unwanted light from being emitted.They can be positioned at different working heights, there are up to three, pre-set fitting positions, with three angular positions at 120º at each height. Option to fit luminaires singly, or in groups of two or three. Protective glass. IP65
Metal halide, HIT-CE 70W, 100W, 150 W.Lamps are controlled from an electronic unit for metal halide lamps. The adjustable model is only available for power of 100-150 W through the DALI interface.Lamps and control units included.
Bolts embedded in concrete.The luminaires are fitted at 1 meter from the upper part of the column. If there is more than one luminaire, they must be fitted 1 meter apart.All elements required for fitting are supplied with the column.
80
1701/4705 = 4m1701/6205 = 6m1701/8205 = 8m
L
400
80
Unipod by Jean Nouvel
IP65
850º C 0,5m
/221 /87
E27-E40 HIT-CE
216
450
544
59860º 60º
30º 30º 450 cd/Klm
7050100W Φ 8,8 KlmhLB= 64%
C 0-C180 C 90-C270
DIN 5040: A21 UTE: 0,60 HNBN: BZ 6CIE: 8/8/7/7/7/7/7/7/7/7/6/6
Features
Lamp included - Columns galvanized or painted grey
Tilted at 5ºColumn ø114
1701/4705h=4m
1701/6205h=6m
1701/8205h=8m
OUTPoles
Colours
Columns
7050/7070WElectronic unit
7050/100100WElectronic unit
7050/150150WElectronic unit
DD7050/100100-150WAdjustable electronic unit
luminaires
8181
Unipod by Jean Nouvel