Ch4 v70 system_configuration_en

transcript

Date: 15.11.2006File: ST-PCS7SYS_V70_systkonf.1

SITRAIN Training for Automation and Drives

SystemConfiguration

PROFIBUS DP

AS 414, AS 416, AS 417

Central Engineering System (ES)

CFC library: Proxy blocks, for field devices and distributed I/O,

faceplates for WinCC, Network configuring: DP master

Ind. Ethernet

SIMOVERTSIMOCODE SIPARTSIPOS 3 MC ET 200 M

Operator control &monitoring

Reporting

Reading measured values andwriting manipulated variables

Configuring

ET 200 iS ET 200 X

System Configuration for PCS 7 Components

Terminal bus

Plant bus

ApplicationWinCC applicationLAN onboard

WinCC applicationCP 1613

NET-Pro

Set PC station Station Configuration Editor (SCE)

HW Config

Configurable Components

AS ES/OS

AS HW Config

Using HW Config to Configure the AS

2 Hardware catalog

Exercise: AS HW Config (Central AS)

CPU 417-4DP

PS IM153-2

SMSM SM SM

ET 200M

( UR1 or UR2)

PS 407

Slot 1 3 5 6

PROFIBUSaddress

Task: AS HW Config (PROFIBUS DP CiR Compatibility)

PS 407 CPU417-4DP

PS IM153-2

SMSM SM SM

PROFIBUSaddress

ET 200 M

(UR1 or UR2)

Exercise: AS HW Config (PROFIBUS DP Set Parameters for CiR Object)

10 x 244 = 2440 I / 2440 O

Max. bytes per slave

Must be made available

as PII/PIQ via the CPU

properties!

Exercise: AS HW Config (Set Parameters for PROFIBUS DP CiR Module)

DP masterbuffer

Inputs

Outputs

Exercise: AS HW Config (CPU Process Image Partition)

PIP Process image partition=

PIPI (inputs)+

PIPO (outputs)

Exercise: AS HW Config (Driver Concept/Symbolic Channel Names)

CPU 417-4DP

PS IM153-1

SMSM SM SM

PROFIBUSaddress

(UR1 or UR2)

PS 407

OB 32 <-> PIP 1

OB 35 <-> PIP 2

Name_channel_0Name_channel_1

Compiling and Downloading the AS HW-Config

Download the hardware configuration only after the following steps have been carried out with NetPro: The network is configured and connections have been set up from

the OSs to the monitored ASs. Connections were also configured between the devices (AS, AS) to

allow data exchange during process control. See also chapter "Network Configuration".

For testing purposes, you can also compile and download the AS configuration in the exercise now (the ES is not yet configured). For this to work, the Ethernet CP of the ES must be in "PG Operation" mode (see also the section "Configuring the Workstation").

Setting the PG/PC Interface for the First AS Download

S7ONLINE (STEP 7) ISO Ind Ethernet Realtek…

Compiling the AS HW Config and Downloading in STOP Mode

Exercise: Download the AS Hardware Configuration in RUN

Exercise: Download the AS HW Config to the PLC(Check CiR Compatibility-1)

Configuring the PC Station (Overview)

Hardware description on the PC stationHardware description in the PCS 7 project

Actual configuration Preset configuration

With"PG

operation"

Commissioning Wizard

Set PC station

2Application

WinCC application

Station Manager

StationConfiguration Editor

(part of PC installation)

Index/type

with "configured mode"

Application

WinCC application

Station Manager

Index/type

HW Configof the PC station(part of project)

Set the PC Station (Modules)

Set PC Station (Access Point)

SCE (Station Configuration Editor Option)

Exercise: SIMATIC PC Station/OS HW Config

Windows network connections (via START Settings Control Panel Network Connections)

Meaningful names for the LAN connections Installed Ethernet CPs

Station Configuration Editorwas created when

PCS 7 was installed on the PCIs configured according to the

subsequent use of the PC as an ESand/or OS

SIMATIC PC stationHW Config is configured in the project in the SIMATIC Manager

and downloaded to the target PC.

S7ONLINE PC local

Calling Up NetPro

Click twice-with a pause between clicks -

and then rename.

Setting Up a Connection (1)

Setting Up a Connection (2)

Change to, for example

OS01_AS01

Downloading a Connection

Cross-Project View

Standard View

Cross-Project View

S7 Connections (Stations in Unknown Projects)

Ch4 v70 system_configuration_en

Technology