Post on 03-Feb-2018
transcript
leis
urew
ear
pro
mot
iona
l
cup
s/m
ugs
spor
tsw
ear
pho
ne c
over
s
umb
rella
s
mou
sem
ats
shot
gla
sses
bag
scl
ocks
trop
hies
/aw
ard
s
tab
lew
ear
P2
INTRODUCTIONTheMagicTouch (GB) Ltd are authorised distributors for the UK and Ireland of sublimation inks and printers from Sawgrass Technologies, world leaders in this unique print process. The company market and distribute all sublimation related products under the DyeSubMagic® brand. All ink cartridges and printers are supported with the relevant ICC colour profiles for vivid colours.
Please note the printing of 100% cotton, dark garments and non-polyester coated products does not work with the sublimation transfer process. Please refer to TheMagicTouch toner-based image transfer process.
HOW TO SUBLIMATEThe following example shows the sublimation process to print a coated ceramic mug, using a mug press.
The following example shows using sublimation to print a polyester T-shirt using a manual heat press.
Print sublimation paper, in mirror image, then trim to size.
Print sublimation paper, in mirror image, using suitable sublimation printer.
Place & position transfer on coated mug & tape in position using heat tape.
Set the heat press to 190ºC and 60 seconds and allow to reach temperature.
Using mug press apply required time (140 secs), heat (190ºC/370ºF) and normal pressure.
Place t-shirt on base of heat press with transfer face down on garment. Tape in position using heat tape & cover with PTFE sheet.
Remove from press and peel transfer immediately for outstanding results.
Set press to medium pressure and close.
Submerge in water to complete the process. Mug boxes are available.
Open press when the time is up and remove PTFE sheet. Remove transfer from contact with garment.
STEP 1
STEP 1
STEP 3
STEP 3
STEP 2
STEP 2
STEP 5
STEP 5
STEP 4
STEP 4
®DyeSub
P3
WHAT DO YOU NEED?Sublimation as a production technique is relatively simple, it’s the chemical process which separates it from any other form of digital printing.
When sublimation inks are heated they turn into a gas and sublimate the image to the polyester based fabric or polyester coated surface. The result is a premium full-colour, photographic quality image that will not crack, peel or wash away from the substrate. However sublimation dyes are not opaque therefore the printable items need to be white or a pastel colour only.
PRINTERSSublimation is an inkjet process and only selected printers can run sublimation inks - due to print head technology and ability to handle the specialist ink. The Virtuoso® printers are the sublimation printers of choice. Desktop and large format printer options are available.
SUBLIMATION PAPERSublimation paper is designed to absorb as much ink as possible to ensure strong and vivid colours. The papers are available in various standard sizes and rolls.
SUBLIMATION INKSThe original sublimation inks from Sawgrass are used, tried and tested by thousands of users worldwide, delivering reliable and cost effective printing. Sublimation inks are unlike regular inks as they are dye rather than inks.
Colour profiles are also available to ensure consistent colour management. As well as supplying inks for current models, the company also supply inks for selected previous models - contact sales@themagictouch.co.uk for your specific requirements.
HEAT PRESSESTo ensure safe and consistent production of sublimation items we recommend using professional and reliable equipment. All swing-head presses, which cover 90% of the applications, are supplied with a heat platen lifetime guarantee. The presses need to attain and maintain constant 190-200ºC temperature with adjustable pressure settings. Other available presses are for mug production and the decoration of caps and hats. All presses supplied come with a one year warranty.
PRINTABLE SUBLIMATION ITEMSTheMagicTouch offer a range of blank printable products. Whilst the process is possible on many items we suggest that being focused on items that are “easy to market” and “profitable” ensures good steady business growth and strong repeat orders.
Please note:All printables need either a polyester coating on hard surfaces such as mugs, metal, tiles, coasters etc or at least 50% polyester fibre content with fabrics such as T-shirts, polos, mousepads etc.
SOFTWAREDesign and graphic software packages such as Corel Draw and Adobe Photoshop that support ICC colour profiles are perfect for sublimation and are widely available.
TRAINING & SUPPORTTheMagicTouch offers training in many aspects of the image transfer business, these are held at our training facility in Dunstable and are free for existing clients to attend.
Customer Support is important to TheMagicTouch, which is why we provide a dedicated Technical Support team to help with your equipment and transfer questions in a variety of ways - via phone, email, Skype or remote desktop software. Not to mention in person!
P4
SUBLIJET HD INKS – EXTENDED CAPACITY
Suitable for SG800 Virtuoso models only.
Cyan 68ml Magenta 68ml Yellow 68ml Black 75ml
SAWGRASS VIRTUOSO SG800 A3 PRINTER PACKAGE
DESCRIPTION
Prints up to 279mm x 432mm includes installation kit containing a set of four regular capacity Sublijet-HD ink cartridges, PowerDriver 4.2, USB cable and Creative Studio software available online and two year warranty.
SAWGRASS VIRTUOSO SG800 BYPASS TRAY
DESCRIPTION
Additional manual bypass tray allows for prints up to 330mm x 1.3m. Capacity of 100 sheets.
SUBLIJET HD INKS – REGULAR CAPACITYSuitable for SG400 or SG800 Virtuoso models
Cyan 29ml Magenta 29ml Yellow 29ml Black 42ml
PRINTERSIntroducing the latest sublimation printer technology with the industry’s first and only fully integrated system. The Virtuoso printer range produce bright HD images using the newly formulated SubliJet-HD cartridges providing higher yield and an expanded colour gamut. Suitable for both Windows and Mac with a maximum resolution of 1200 x 1200 dpi.
SAWGRASS VIRTUOSO SG400 A4 PRINTER PACKAGE
DESCRIPTION
Prints up to 216 x 356mm, includes installation kit containing a set of four regular capacity Sublijet-HD ink cartridges, PowerDriver 4.2, USB cable and Creative Studio software available online and two year warranty.
P5
SUBLIMATION INK FOR PREVIOUS MODELS
DESCRIPTION
As well as the latest sublimation printers we also stock ink and consumables for selected older models of sublimation printers including;
Ricoh GXe3300, SG3110, GXe7700, GX7000, SG7100.
Epson WP4015, 4850, 4880, 7890.
Please call for details or visit the sublimation section of www.themagictouch.co.uk
SUBLIMATION PAPER ROLLS
DESCRIPTION
Rolls of sublimation paper suitable for large format machines. Available in widths of 432mm (17”), 610mm (24”) or 630mm (24.8). Roll length 30.5m.
17” (432mm) Roll 24” (610mm) Roll 24.8” (630mm) Roll
TEX PRINT R
DESCRIPTION
Traditional sublimation paper in A4 or A3 format. Suitable for selected Ricoh model printers.
A4 (210 x 297mm) 110 sheets A3 (297 x 420mm) 110 sheets
SAWGRASS VIRTUOSO VJ 628 LARGE FORMAT PRINTER
DESCRIPTION
24.4” (620mm) printable width (with paper size 24.8” - 630mm) based on Mutoh ValueJet Print Engine.
Supported by PowerDriver and complete with colour profiles and RIP options.
Whilst the majority of product applications are covered by both A4 and A3 formats, for larger items we suggest the following professional option.
DYESUBMAGIC® SUBLIMATION PAPER
DESCRIPTION
For vivid sublimation transfers with quick-dry, high ink dispersion and high colour gamut. Universal paper for all sublimation printers.
Mug Paper (210 x 99mm) 300 sheets A4 (210 x 297mm) 200 sheets A3 (297 x 420mm) 100 sheets A3+ (329 x 483mm) 100 sheets
• Small footprint
• Dual CMYK, 8-Color or specialty combinations
• High Definition imaging up to 1440 dpi
• Full system warranty with onsite support
• Take-up reel included
• Automatic sheet off
• New High Density inks optimized and certified by Mutoh
• Convenient and reliable single-use cartridges
• Expanded gamut, vibrant colours, deep rich blacks, neutral greys
• CMYK, Lc, Lm, Lk, Llk, Fluorescents and others
• High yield / low imaging cost
P6
SWING HEAD MANUAL PRESS BASE OPTIONS
DESCRIPTION
Interchangeable base tables for the manual press to assist pressing of shaped items - such as bags, holdalls, umbrellas etc.
SWING HEAD MANUAL PRESS 38 X 50cm 42 X 59cm
DESCRIPTION
Professional, heavy duty swing head press with digital controller. Includes two PTFE sheets. Suitable for all flat based sublimation, TMT and MagiCut applications. Lifetime warranty on heat platen.
SWING HEAD INSTA 201
DESCRIPTION
Small format and lightweight swing head type press with 33 x 33cm heat plate. Suitable for all flat based sublimation, TMT and MagiCut applications. Lifetime warranty on heat platen.
HEAT PRESSESA good quality, reliable heat press is the cornerstone of any sublimation business. With over 24 years of experience, we offer only the most reliable of machinery so your business can function efficiently going forward. All cast aluminium heat plates carry a lifetime warranty.
CAP/POCKET COMBI PRESS
DESCRIPTION
Perfect for pressing sleeves, caps and small areas. The press comes complete with a 15 x 8cm curved element and base table for caps/hats and a 15 x 9cm element and base table for flat items.
15 X 15cm
20 X 20cm
25 X 25cm
30 X 30cm
P7
AIR COMPRESSORS
DESCRIPTION
Used in conjunction with pneumatic heat presses. Quiet operation. Hose and coupling supplied as standard.
25 LITRE SINGLE ENGINE
50 LITRE TWIN ENGINE
50 LITRE OIL FREE
HTP621 MUG PRESS
DESCRIPTION
Comes complete with standard 10/11oz element. Additional elements available for bone china, latte, espresso and shot glasses. Complete with one year warranty.
SWING HEAD PNEUMATIC PRESS
DESCRIPTION
Automatic air operation removes operator fatigue - ideal for large volume production. Includes two PTFE sheets. Use in conjunction with an air compressor. Swing head element with print area of 37 x 50cm.
OMEGA 750
DESCRIPTION
Draw style press with automatic operation, using suitable air compressor (50 litre twin engine, or 50 litre oil free models recommended). 80 x 100cm pressing area.
Operates using 230 Volts AC 50/60 Hz and requires exclusive use of a power outlet rated for at least 32 amps.
Element A
1.5oz Shot
Element B
12oz Latte
Element C
17oz Latte
Element D
2.5oz Espresso
Element E
6oz Mug/Bone China Windsor/Balmoral
Element F
10/11oz Mug
P8
WINDSOR STYLE BONE CHINA MUGS
DESCRIPTION
High quality bone china with gloss finish. Unique lightweight feel and elegant handle. Hand wash only and not suitable for microwave ovens.
SPECIFICATIONS
36 mugs per case, height 105mm, diameter 75mm.
BALMORAL STYLE BONE CHINA MUGS
DESCRIPTION
Lightweight bone china with elegant handle and high quality gloss finish. Not suitable for microwave ovens. Hand wash only.
SPECIFICATIONS
36 mugs per case, height 85mm, diameter 75mm.
COATED SATIN FINISH 10oz MUGS
DESCRIPTION
Premium ‘A’ Grade quality Durham style satin mug, coated and certified to BS EN 12875-4 standards offering over 750 dishwasher cycles with no sign of fading. Unique satin finish is non-reflective providing crisp sharp images. Also suitable for use in microwave ovens.SPECIFICATIONS
36 mugs per case, height 92mm, diameter 80mm.
COATED GLOSS FINISH 10oz MUGS
DESCRIPTION
Premium ‘A’ Grade quality Durham style mug, gloss coated and certified to BS EN 12875-4 standards offering over 2000 dishwasher cycles with no sign of fading. Also suitable for use in microwave ovens.
SPECIFICATIONS
36 mugs per case, height 92mm, diameter 80mm.
MUGS & BOTTLESThe printed mug remains the world’s most popular sublimated item and to celebrate this we have opted to ensure our range is comprehensive and driven by a consistent quality and value for money.
In association with our manufacturing partners all products and coatings conform to the strict EU Health and Safety legislation to ensure safe products and happy customers.
Artwork templates available on website.
Due to the fragile nature of ceramic and bone china products we have designed a new outer shipping box to enable 2 cases to travel with dramatically reduced risk of damage or breakages. However this involves having a 2 case minimum order. For orders where single case is shipped the carriage charge will remain as £10 next day where applicable.
DON’T FORGET
MUG BOXES& HEAT TAPE
SEE P23
USES MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT E
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT E
SEE PAGE 7FOR DETAILS
P9
SAVINGS MUG
DESCRIPTION
11oz money bank with coin slot in the top and rubber stopper in the bottom.
SPECIFICATIONS
6 per pack, height 93mm, diameter 80mm.
POLYMER 11oz MUGS
DESCRIPTION
Durham style polymer mug with a bright white finish. Very durable, perfect for all outdoor events and in car refreshments. The polymer used conforms to all FDA and RoHS regulations. Not suitable for dishwasher or microwave.
* Pressing requires Mug Insert - see below.
SPECIFICATIONS
12 mugs per pack, height 92mm, diameter 80mm.
POLYMER MUG INSERT
DESCRIPTION
Aluminium insert to provide support for Polymer mugs during heat pressing.
SPECIFICATION
73 x 100mm (Pink) - for Mug. 75 x 110mm (Blue) - for Travel Mug.
LATTE 12oz & 17oz MUGS
DESCRIPTION
High quality earthenware with unique shape. Available as 12oz or 17oz size. Dishwasher and microwave safe.
SPECIFICATIONS
12oz - 36 mugs per case, height 102mm, diameter 90mm reducing to 62mm.
17oz - 24 Mugs per case, height 152mm, diameter 88mm reducing to 60mm.
POLYMER TRAVEL MUGS
DESCRIPTION
Polymer travel mug with a bright white finish. Very durable, perfect for all outdoor events and in car refreshments. The polymer used conforms to all FDA and RoHS regulations. Not suitable for dishwasher or microwave.
* Pressing requires Mug Insert - see below.
SPECIFICATIONS
Height 155mm, diameter 85mm reducing to 65mm.
WOW MUG
DESCRIPTION
The ever popular black or blue ceramic colour changing mug. Temperature sensitive surface changes to reveal your image when hot water added. Hand wash only.
SPECIFICATIONS
36 mugs per case, height 92mm, diameter 80mm.
SMUG 6oz MUG
DESCRIPTION
Developed for most popular coffee machines. Also popular as a children’s mug. Complete with individual box. Dishwasher safe.
SPECIFICATIONS
48 mugs per case, height 69mm, diameter 72mm.
ESPRESSO 2.5oz CUP
DESCRIPTION
Perfect for all Espresso lovers everywhere. Dishwasher safe.
SPECIFICATIONS
12 mugs per pack, height 66mm, diameter 51mm.
USES MUG PRESS ELEMENT E
SEE PAGE 7FOR DETAILS
USES MUG PRESS
ELEMENT B/CSEE PAGE 7
FOR DETAILS
USES MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT D
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILS
USES MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILSUSES
MUG PRESS ELEMENT F
SEE PAGE 7FOR DETAILS
WATER BOTTLE
DESCRIPTION
Aluminium 600ml water bottle. Available in white or silver with mouthpiece and cap included. For cool drinks only.
P10
HD METAL BOARDS
SPECIFICATIONS
HD coated white gloss aluminium metal 1.4mm thick. Perfect for gifts and corporate needs. Available in the following sizes; REF SIZE MM (EXACT) SIZE INCHES (APPROX)
A 127 X 177.8mm 5” X 7”
B 150 X 200mm 6” X 8”
C 203.2 X 254mm 8” X 10”
D 279.4 X 355.6mm 11” X 14”
E 304.8 X 304.8mm 12” X 12”
F 304.8 X 457.2mm 12” X 18”
HD METALIntroducing new HD Metal developed to showcase stunning photographic and sign based designs in full colour. The Aluminium sheets (1.4mm thick) are multi-coated to ensure a deep gloss finish that is both scratchproof and waterproof.
HD Metal is certified to ISO 4892-3:2013 for UV and global solar radiation resistance for a minimum of two years. Perfect for signage, point-of-sale and advertising markets.
EASEL STRUT
DESCRIPTION
Aluminium strut for desktop display.
WALL MOUNTS
DESCRIPTION
Stand off block for wall mounting.
3M FIXING PADS
DESCRIPTION
Adhesive pads for wall mounting metal. Pack contains 12 sets (8 medium, 4 small).
ENDURA FABRIC
DESCRIPTION
Absorbs moisture when printing large metal panels. Endura Fabric is advised when pressing metal as it protects the panel and minimises chipping on the edges.
SPECIFICATIONS
635 x 1000mm (25 x 40”).
HD METAL CLOCKS A3 ROUND (270mm)
A4 ROUND (198mm)
RECTANGULAR (140 X 255mm)
DESCRIPTION
HD coated white gloss aluminium metal with pre-drilled holes for fixtures. Complete with mechanism & box. Perfect for gifts and corporate needs.
See website for templates.
P11
SPORTS BAG
DESCRIPTION
300D high quality polyester weave. Robust, water-repellent with easy black draw string closure.
SPECIFICATIONS
Dimensions: 450 x 330mm.
IMAGE BAGS
DESCRIPTION
Shoulder bags in black polyester 600D with printable white detachable flap.
SPECIFICATIONS
Small Bag Printable area: 220 x 180mm.
Medium Bag Printable area: 245 x 320mm.
Large Bag Printable area: 270 x 310mm.
Additional printable flaps available for all sizes.
BAGSWe carry a number of bags in stock for a variety of uses. All can be printed with outstanding results and continue to be an enormously popular product.
GIFT BAG
DESCRIPTION
Non-woven polyester fabric. Perfect gift bag for jigsaws, party and wedding favours.
SPECIFICATIONS
Dimensions: 152 x 188mm.
HIP BAG
DESCRIPTION
Perfect for all adventurers and travellers. Black fabric with printablec white panel.
Easy release clip and adjustable strap, three pockets to stow away valuables.
SPECIFICATIONS
Dimensions: 130 x 230 x 50mm. Printable area: 85 x 205mm.
P12
iPAD CASE
DESCRIPTION
Robust protection for the iPad and iPad2. Printable front cover with black faux effect surround.
Easily folds for optional stand position.
Printable area - iPad 175 x 258mm.
See website for template.
iPAD MINI 360 CASE
DESCRIPTION
Booklet style iPad PU leather covers - with printable fabric front. The plastic shell holds the iPad securely whilst enabling rotation and positioning for either landscape or portrait use. Fully protects the iPad and is easily personalised. Features a magnetic closure for auto wake/sleep mode.
Printable area - iPad Mini 133 x 205mm.
See website for template.
PHONE & TABLET ACCESSORIESPersonalisation of technology related products has become hugely popular over recent years - and with new models constantly being brought to market, it is certain to continue to grow.
Great as a personalised gift and with options for every budget, there’s no reason two phones or tablets should look the same!
iPAD/TABLET POUCH
DESCRIPTION
The black 3.5mm rubber compound with white jersey surface and black heat resistant stitching. Great durability and easy to print. Helps keep iPads safe from scratches and bumps.
Dimensions: 255 x 190 x 7mm.
See website for template.
iPAD/iPAD MINI ‘CLIP-ON’ COVER
DESCRIPTION
Fits easily and firmly to the pad by use of its moulded clip on corners, protecting the back of the iPad from scratches and abrasions. Cut away design allows uninhibited access to the iPad controls.
Personalised by use of the metal insert which can be printed, then simply applied to the adhesive coated, recessed area.
Available in black or white to suit the iPad or desired result.
See website for template.
P13
COVERGEL
DESCRIPTION
Create and decorate with your own photos, designs or logos. Thicker than a sticker, less bulky than a case.
Takes seconds to apply. High gloss 3D effect and finish. Premium 3M non-permanent, repositionable backing.
Safe to install and will not affect any product warranty.
Sold in pack of 10.
See website for template.
iCUSTOM ‘CLIP-ON’ COVER
DESCRIPTION
iCustom ‘clip-on’ covers consist of either a black or white high quality hard plastic case together with a pre-cut formed piece of printable coated white metal. Once the metal insert is decorated remove the peelable adhesive film from the case and apply the printed metal into perfect position. Access to all ports, controls and sensors are perfectly aligned.
See website for template.
SMART PHONE CASE
DESCRIPTION
PU leather wallet with white fabric cover for Samsung Galaxy models from S3 to S7 Edge, and iPhone models from 4 to iPhone 6S Plus.
iPhone 6/6S Plus iPhone 6/6S iPhone 5/5S & 4/4S
Galaxy S7/S7 Edge Galaxy S6/S6 Edge Galaxy S5, S4 & S3
See website for template.
SMART PHONE POUCH
DESCRIPTION
Black rubber 3.5mm compound with white jersey surface and black heat resistant stitching. Helps provide protection against scratches and bumps.
Dimensions: 130 x 75 x 7mm.
Sold in pack of 10.
P14
BEERMATS)
DESCRIPTION
Double sided printable cardboard beermats. Die cut sheet of 6 coasters, 10 sheets per pack.
SPECIFICATION
Square mats with rounded corners - 96 x 96mm.
See website for template.
GLOSS COASTER
DESCRIPTION
Quality high gloss coated MDF coaster with soft cork base.
SPECIFICATION
Square - 95 x 95 x 4mm. Round - 95mm dia. x 4mm. See website for template.
RUBBER COASTER
DESCRIPTION
Natural open cell black rubber with white fabric top.
SPECIFICATION
Square: 90 x 90 x 6mm. Round: 90mm dia. x 6mm. See website for template.
PEARLESCENT RUBBER COASTER
DESCRIPTION
Natural open cell black rubber with white pearlescent printable surface.
SPECIFICATION
Square: 95 x 95 x 3mm.
See website for template.
TABLEWARE & MATSCoasters, placemats etc - ideal for photogifts and corporate branding.
Great products for commercial environments and restaurants of every kind and excellent as personalised photogift products.
P15
GLASS CHOPPING BOARD
DESCRIPTION
Perfect for all culinary experts food preparation.
Each unit is heat resistant and comes complete with rubber feet.
See website for template.
MOUSEMATS
DESCRIPTION
All products are produced from the highest quality natural rubber. Black or white base.
SPECIFICATION
Size: 250 x 190 x 6mm.
See website for template.
PLACEMATS DESCRIPTION
MDF with gloss printable surface - complete with cork back and rounded corners.
Size: 200 dia x 4mm Size: 200 x 200 x 4mm Size: 190 x 250 x 4mm Size: 225 x 300 x 4mm
See website for template.
COASTER HOLDER
DESCRIPTION
Wooden coaster holder for 4 coasters.
RUBBER CONFERENCE MAT
DESCRIPTION
High quality open cell natural rubber placemat with fabric base.
SPECIFICATION
Size: 380 x 260 x 3mm.
See website for template.
BAR/COUNTER MAT
DESCRIPTION
Nitrile rubber bar runner.
SPECIFICATION
Dimensions: 200 x 400 x 1mm.
See website for template.
P16
SMALL GLASSES POUCH
DESCRIPTION
Suitable for reading glasses etc. Keeps glasses safe from scratches.
SPECIFICATION
Small: 155 x 60 x 6mm.
Sold in pack of 10.
LARGE GLASSES POUCH
DESCRIPTION
Perfect for helping to protect those expensive designer sunglasses from scratched lenses.
SPECIFICATION
Large: 160 x 75 x 6mm.
Sold in pack of 10.
BOTTLE SHIRT
DESCRIPTION
Perfect for parties, celebrations and souvenirs. Helps keep bottles cool!
SPECIFICATION
Dimensions: 135 x 135 x 6mm.
CAN WRAP
DESCRIPTION
Provides a firmer grip whilst keeping cans and bottles cool.
SPECIFICATION
Dimensions: 95 x 100 x 6mm.
BOTTLE WRAP
DESCRIPTION
Create that unique personalised look. Suitable for most 75cl wine and spirit bottles.
SPECIFICATION
Dimensions: 165 x 120 x 7mm.
COOLSTUFFOur exclusive range of fun, innovative pouches and sleeves. Made from black rubber compound 3.5mm thick with jersey surface and black heat resistant stitching - CoolStuff products make great promotional gifts.
Easily printable with superb results and amazing stretchability - CoolStuff is perfect for cool personalisation.
P17
ROSEWOOD EFFECT PLAQUE SMALL (150 X 200mm) MEDIUM (200 X 250mm) LARGE (250 X 300mm)
DESCRIPTION
Piano finish Rosewood effect plaque mount available in 3 sizes. Complete with screwable metal rod for desktop display and pre-cut recess for wall hanging.
WALNUT EFFECT PLAQUE SMALL (150 X 200mm) MEDIUM (200 X 250mm) LARGE (270 X 330mm)
DESCRIPTION
Walnut effect plaque mount available in 3 sizes and suitable for desktop display via strut or wall hanging using pre-cut recess.
AWARDS & PLAQUESAward and recognition products continue to grow in popularity in both the corporate and photogift markets. They offer the ability to produce a ‘one off’ or personalised award very economically - whilst making a high quality and high perceived value item. Used as everything from sporting awards to memorial plaques.
MOUNT TAPE
DESCRIPTION
For perfect adhesion of metals and signage to plain MDF mounts.
SPECIFICATION
Size: 30cm x 6m.
STRUTS
DESCRIPTION
To display plaques on desks/counters.
SPECIFICATION
Size: 178mm.
SILVER METAL SMALL (102 X 146mm) MEDIUM (146 X 203mm) LARGE (203 X 278mm)
DESCRIPTION
Coated aluminium award plaque with silver finish.
WHITE METAL SMALL (102 X 146mm) MEDIUM (146 X 203mm) LARGE (203 X 278mm)
DESCRIPTION
Coated aluminium award plaque with white finish.
GOLD METAL SMALL (102 X 146mm) MEDIUM (146 X 203mm) LARGE (203 X 278mm)
DESCRIPTION
Coated aluminium award plaque with gold finish.
P18
JUST SUB POLO SHIRTS
DESCRIPTION
New range of 100% polyester sublimation garments using new Neoteric textured fabric with wickability. 185gsm, set in sleeve. Sizes; XS - XXL available.
JUST SUB T-SHIRTS
DESCRIPTION
New range of 100% polyester sublimation garments using new Neoteric textured fabric with wickability. 185gsm, set in sleeve. Sizes; XS - XXL available.
TEXTILESublimated garments have the image dyed into the garment - it provides vibrant colour reproduction with no added weight or feel to the transfer. Where there is polyester, there is printability.
To print onto dark colours, cotton and other products using a laser printer - see the Transfer Paper section of www.themagictouch.co.uk or call us for details.
APRON
DESCRIPTION
100% polyester printable apron.
Print Area: 600 x 850mm.
Colour: White.
P19
ANKLE SOCKS
DESCRIPTION
100% cool weave polyester/lycra ankle sock, anti-bacterial, sweat absorbent. Black heel and toe.
Available in: Medium (4-7 size) Large (8-10 size).
SPORTS SOCKS
DESCRIPTION
100% cool weave polyester/lycra sports sock, anti-bacterial, sweat absorbent. Black heel and toe.
Available in: Medium (4-7 size) Large (8-10 size).
BABY BIBS
DESCRIPTION
100% polyester baby bib, with blue or pink trim and velcro fastening.
Size: 300 x 350mm approx.
CUSHION COVER
DESCRIPTION
Easily personalised polyester cover for cushions or pillows.
Size: 400 x 400mm.
PILLOW CASE
DESCRIPTION
Machine washable poly/cotton cover for pillows.
Size: 750 x 450mm.
HIGH VIZ VEST L- XL XXL
DESCRIPTION
100% polyester weave. They conform to 89/686/EEC and have the reflective taping for EN471 EPI Class 2 approval. Both versions come with Velcro front fastening.
Each garment is individually bagged for convenience.
TABLE FLAGSDESCRIPTION
Polyester moire table flag for conference & hotel markets. Includes base, pole and flag.
Flag size: 100 x 150mm.
TOWELS
DESCRIPTION
Cotton towels with non-fleece poly/cotton strip for full colour imaging.
Available as a hand towel in 3 colours (navy blue, red or white).
Size: 100 x 50cm. Printable strip:8cm.
SUNSCREENS
DESCRIPTION
Advertise in cars & vans, along with the traditional purpose of reducing the rays and glare of the sun for passengers.
In packs of 2 inclusive of rubber suckers.
Size: 420 x 350mm.
P20
MISCELLANEOUSOur range of sublimation blank products is ever increasing - below is a selection of popular sublimation printable items. All are both simple and economical to produce - offering great profit potential.
DOG COLLAR
DESCRIPTION
Great new way to ensure no more lost dogs. Printable polyester surface section on universal and adjustable dog collar.
SPECIFICATION
Suitable for a 30-50cm neck. Printable area: 270 x 28mm.
FLOOR MAT
DESCRIPTION
Polyester mat with non-slip base. Perfect for bath time, pets and welcome messages.
SPECIFICATION
Dimensions: 580 x 380mm.
MAGNETIC JIGSAW
DESCRIPTION
12 piece flexible promotional jigsaw with magnetic backing. Great as a fun photogift, fridge magnet or promotional item.
SPECIFICATION
Size: 100 x 140mm.
JIGSAW PUZZLE
DESCRIPTION
Premium quality Medite-wooden base puzzle. Laser cut surface designed for sublimation transfer printing.
P21
LUGGAGE STRAP
DESCRIPTION
Personalise straps for luggage and travel items.
Strong adjustable strap with secure locking clasp. 50mm wide and approx 1.5m length.
SPECIFICATION
Size: 50mm x 1.5m.
FLIP FLOPS
DESCRIPTION
The durable 14mm soles are manufactured from a natural rubber compound with a printable white jersey fabric surface giving superb mould and support properties. Available in small, medium and large adult & kids sizes.
SPECIFICATION Available in packs of 10 by size.
See website for templates.
MAGIC FLIP STRAP APPLICATOR
DESCRIPTION
Professional strap applicator available for high volume production.
LANYARD
DESCRIPTION
Black on one side, printable reflective white on the other.
Perfect for exhibitions, mobile phones, digital cameras, MP3 players and ID cards.
SPECIFICATION
Printable area: 600mm x 20mm.
LUGGAGE TAG - MDF
DESCRIPTION
Coated MDF, perfect for all luggage, bags, club memberships etc. Includes plastic strap.
SPECIFICATION
Printable area: 63 x 106mm.
P22
CIGARETTE CASE
DESCRIPTION
Metal cigarette case with printable sublimation metal insert. Suitable to hold approx 20 cigarettes. Size: 105 x 80mm. Features an integrated refillable lighter.
See website for template.
SHOT GLASS
DESCRIPTION
Printable 1.5oz shot glasses, perfect for pubs and bars. Requires mug press with appropriate shot glass element or oven wrap. Available in clear rimless or opaque version with gold effect rim.
MDF DOOR HANGER
DESCRIPTION
Coated MDF. Perfect for bedrooms and meeting rooms. Size: 101 x 228 x 3mm
See website for template.
USES MUG PRESS ELEMENT A
SEE PAGE 7FOR DETAILS
USES SHOT GLASS
WRAPSEE PAGE 23FOR DETAILS
OR
UMBRELLA
DESCRIPTION
Promotional golf style umbrellas, 50” diameter when open with carbon based frame, polypongee fabric and black foam handle. Available as black/white, navy/white, green/white, royal/white or red/white.
P23
ACCESSORIESPlease see below for a selection of accessories and consumables designed to aid you in the personalisation process and the finishing of your final product. A full range of accessories, printables and equipment is available on our website and constantly being updated along with information on printing with other processes than sublimation.
Visit www.themagictouch.co.uk for more information - or give us a call on 01582 671444.
METAL GUILLOTINE
DESCRIPTION
Flat bed guillotine to accurately cut metals and plastics.
Maximum thickness 2mm. Maximum size 305mm.
CORNER ROUNDER
DESCRIPTION
Offers both 6mm & 4mm radius for clean corners on metal and plastics.
Overall height 205mm.
HEAT TAPE
DESCRIPTION
Heat proof tape to assist in pressing mugs and any items where the transfer must remain firmly in place.
10mm wide by 33m length.
POLYMER MUG INSERT
DESCRIPTION
Aluminium insert to provide support for Polymer mugs during heat pressing.
73 x 100mm (Pink) - for Mug. 75 x 110mm (Blue) - for Travel Mug.
SHOT GLASS WRAP
DESCRIPTION
Shaped silicon rubber wrap & clips for sublimating shot glasses in a domestic oven.
PRINTABLE MUG BOX
DESCRIPTION
Printable polyester coated mug boxes, providing opportunities for a fully personalised mug gift package.
PLAIN MUG BOX
DESCRIPTION
Plain mug box - providing protection and easy packaging. Suitable for Wow Mug, 10/11oz Ceramic Mug and Savings Mug.
Plain mug box - packed in 100’s.Size: 110 x 110 x 110mm.
PTFE SHEET 38 X 50cm 45 X 61cm
DESCRIPTION
Non-stick PTFE sheet to assist application and maintaining clean heat presses and substrates. 38 x 50cm or 45 x 61cm.
Bag - Image, Vanity/Purse 60 190 Medium -
Bag - Gift Bag, Hip Bag 45 190 Medium -
Bag - Sports 60 180 Medium Place PTFE sheet inside bag
Coaster - Beermat 45 190 Medium -
Coaster - Pearlescent 50 190 Medium -
Coasters - Rubber, Gloss 60 190 Medium -
CoolStuff, Smart Phone Pouch, iPad/Tablet Pouch 60 170 Medium -
CoverGel 90 180 Medium -
Dog Collar 45 180 Medium -
Flip Flops 60 170 Medium -
Glass Chopping Board A4 180 190 Light Do not mirror image
Glass Chopping Board A3 240 190 Light Do not mirror image
HD Metal, HD Metal Clock 130 190 Medium Allow to cool for 3 mins before removing transfer
iPad ‘Clip-On’ Cover 105 180 Medium Metal above, paper below
iCustom ‘Clip-On’ Cover, Cigarette Case 90 180 Medium Metal above, paper below
iPad 360 Case, iPad Case, Smart Phone Case, 60 190 Medium -
Jigsaw - HD Board 50 175 Medium -
Jigsaw - Medite, Magnetic 60 190 Medium -
Luggage Tag - Polymer 45 190 Medium -
Mousemat 60 190 Medium -
Mug - 10oz Gloss/Satin, Wow Mug, Savings Mug 140 190 Medium Mug Press required
Mug - Espresso, Smug 120 190 Medium Mug Press required
Mug - Windsor, Balmoral 80-100 190 Medium Mug Press required
Mug - Latte 12oz 160 190 Medium Mug Press required
Mug - Latte 17oz 180 190 Medium Mug Press required
Mug - Polymer 11oz, Polymer Travel Mug 120 170 Medium Mug Press & Insert required Remove Insert before cooling
Mug Box - Printable 60 190 Medium -
Placemat MDF, Door Hanger, Rubber Conference Mat 60 190 Medium -
Plaque - Gold, Silver or White Metal 60 180 Medium Metal above, paper below
Shot Glass 120 170 Medium Mug Press required
Just Sub, Apron, Floor Mat, Cushion Cover, MDF Clock, Pillow Case, High Viz, Ankle Socks, Sport Socks 60 190 Medium -
Sun Screen, Table Flag, Towels, Lanyards, Bar Runner, Luggage Strap, Baby Bib, Luggage Tag - MDF, Umbrellas 60 190 Medium -
Water Bottle 120 190 Light Mug Press required
When sublimating products you will need to take into account variables such as: thickness, texture, size and colour. Print your images approx 5-10mm larger than the size of the substrate you are transferring to, this allows a margin of error when aligning everything under the heat press.
Pressing times depend on the colour intensity and size of each artwork. Please note that the listed information is based on performed tests with equipment supplied by TheMagicTouch.
Pressure settings listed below - Light = 2 bar, Medium = 4 bar, Heavy = 6 bar.
To view our full Terms & Conditions please visit www.themagictouch.co.uk
Revision 10/15
TIME TEMP PRESSURE NOTES
telephone: +44 (0)1582 671444 facsimile: +44 (0)1582 671555www.themagictouch.co.uk email: sales@themagictouch.co.uk
TheMagicTouch (GB) LtdUnit 4 • Apex Business Centre • Boscombe RoadDunstable • Bedfordshire • LU5 4SB • England
DyeSub
The
Mag
icT
ouch
and
Mag
iCut
are
reg
iste
red
trad
e m
arks
of T
heM
agic
Tou
ch G
mbh
, Ger
man
y. D
yeS
ub M
agic
® is
a r
egis
tere
d T
rade
mar
k.
PROCESSING GUIDE