Post on 22-May-2020
transcript
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
PrCAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
PrCAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
Pr
DCT3416 Quick Start GuideFollow the cabling diagram below that best matches your home entertainment configuratioRefer to the DCT3416 User Guide at for safety instructions
and other detailed instructions. NOTE: Allow 2 inches of clearance around the DCT3416 for proper ventilation.
n.www.motorola.com/videoproducts
Connecting to an A/V Receiver - Audio Only
Cabling to an HDTV - Audio OnlyCabling to an HDTV
If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound.
If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound.
-
-
-
-
Make sure you connect the coaxial cable securely. Either hand tighten ortighten with a quarter turn of a wrench. Too loose or too tight can cause problems.
HDMI is the preferred connection if your HDTV has it. This combines digita lvideo and audio.
IEEE1394 is a digital connection for video and audio but does not support theInteractive Program Guide and Viewer menu system.Component Video (Red-Green-Blue) is an analog video connection thatsupports High-Definition video formats.
A/V receiver
DIGITAL INPUT
TV/MONITOROUTPUT
SPEAKERCONNECTORS
COAX
VIDEO S-VIDEO
R
DVD
CABLE/TV
VIDEO 2
IN
OUT
VCR
AUDIO VIDEOL VIDEO S-VIDEO
OPTICAL
Either / orCable in
CABLE/ANTENNA IN
OPTICALSPDIF
INPUT
AUDIO LEFT
DIGITAL INPUTCOAX
AUDIO RIGHT
HDTV
Cable in
Either / or
CABLE/ANTENNA IN
ComponentVideo Input
Y
Pb
Pr
HDMI
IEEE 1394
HDTV
Either / or
Cable in
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF
VIDEO
AUDIO
R
L Pb
Y
Pr
TV PASS CARD
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
Connectors
RF IN
RF OUT
SPDIF
OPTICAL SPDIF
VIDEO
Pr
Pb
Y
HDMI
IEEE 1394
AUDIOL
R
S-VIDEO
Red text denotes: FUTURE USE
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
PrCAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
PrCAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF TV PASS CARD
VIDEO
AUDIO
R
L Pb
Y
Pr
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007 538759-001-a2/07 MGBI
DCT3416 Quick Start Guide
Connecting a Stereo TV*
HDTV and Digital Surround Sound are not supported in this configuration.
HDTV and Digital Surround Sound are not supported in this configuration.The preferred standard-definition video connection is S-Video. The yellow composite video connector is the next preferred connection. Neither of these video connections support High-Definition TV. Red and white stereo connectors do not support Dolby Digital surround sound.
DIGITAL INPUT
TV/MONITOROUTPUT
SPEAKERCONNECTORS
COAX
VIDEO S-VIDEO
R
DVD
CABLE/TV
VIDEO 2
IN
OUT
VCR
AUDIO VIDEOL VIDEO S-VIDEO
OPTICAL
A/V receiver
CABLE/ANTENNA IN
INPUT
S-VIDEO
VIDEO
AUDIO LEFT
AUDIO RIGHT
To TV
CABLE/ANTENNA IN
INPUT
AUDIO
LR
VIDEO
OUTPUT
AUDIO
LR
VIDEO
Stereo VCR Stereo TV
To TV
CABLE/ANTENNA IN
INPUT
AUDIO
LR
VIDEO
OUTPUT
AUDIO
LR
VIDEO
CABLE/ANTENNA IN
INPUT
Stereo TVStereo VCR
S-VIDEO
VIDEO
AUDIO LEFT
AUDIO RIGHT
CABLE/ANTENNA IN
INPUT
S-VIDEO
VIDEO
AUDIO LEFT
AUDIO RIGHT
Stereo TV Either / or
Cable in
Connecting an A/V Receiver, TV, and VCR**
Connecting a Stereo TVand a Stereo VCR
RF IN
IR
RF OUT
HDMI
SATAUSB
ETHERNET
IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX
S-VIDEO
SPDIF
OPTICALSPDIF
VIDEO
AUDIO
R
L Pb
Y
Pr
TV PASS CARD
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
Connectors
RF IN
RF OUT
SPDIF
OPTICAL SPDIF
VIDEO
Pr
Pb
Y
HDMI
IEEE 1394
AUDIOL
R
S-VIDEO
** To play Dolby Digital 5.1 sound through the receiver, connect the DCT3416 to the receiver using the DIGITAL AUDIO COAX or DIGITAL AUDIO OPTICAL connections. Audio R and L connectors do not carry Dolby Digital 5.1. sound.
*When connecting the video path, never connect stereo video and S-video at the same time.
Red text denotes: FUTURE USE