Deterioration of CMP: Abrasion and Erosion caused by years of water and debris flowing through the...

Post on 27-Dec-2015

217 views 1 download

Tags:

transcript

Do you have culverts that look like this?

•Deterioration of CMP:• Abrasion and Erosion

caused by years of water and debris flowing through the pipe

•Flow Line Corrosion Effects:• Structural deterioration

of ..flow line• Structural

backfill ..displaced• Side support is lost• Sink holes develop

at ..surface• Catastrophic failure

CMP Repair can rehab and stabilize your culverts to look

like this.

The CMP Repair Solution

An invert with a corroded bottom, causing loss of flow and soil stability.

We reline the invert with coated galvanized metal plates.

Overlapping the sheets of metal upstream.

*Filling voids created by

erosion……………. *Stabilizing soil *Bonds existing pipe …to new corrosion …free insert *Displaces water *Forces flow to return .. to host pipe.

High Density Poly-urethane is

Injected

Using a high pressured fastener tool to adhere the new lining to the host pipe.

At the

inlet and

outflow of

the pipe,

the ends

are cut

and bent

over the

invert to

seal and

protect

the

openings.

BEFORE AFTER

Harris County Flood Control Katy, TX

Before After

Lovell, WY

BNSF near Sapulpa, OK

BEFORE AFTER

BEFORE AFTER

BNSF Oklahoma

Union Pacific, Fayetteville TX

AfterBefore

Benefits to using CMP Repair

* Patented Process*Continually building working relationships ..with companies and cities such as BNSF, ..Union Pacific, City of Ft. Worth TX, Harris ..Co. Flood Control, W.T Byler, Rj Corman* Affiliated with URETEK USA*When working with railroad companies: No ..interruption to track time* When working for cities: No road closures ..or interruptions to traffic

We have built a removable skid with a complete operating system that can be

sent down the track

Off loading the skid in a remote location.

CMP Repair15525 Coe Loop

Magnolia, TX 77355(281)356-2084

www.cmprepair.com