Post on 03-Apr-2016
description
transcript
Devin Lazor The Ohio State University - 2014
Devin Lazordjlaz@comcast.net - 248-520-5930
Table of Contents
Professional Projects
Dublin Bridge Park Retail and Flats -
Collegiate Projects
Bob Evan’s Neighborhood Cafe’ -
A Place for Many / And Places for the Select Few -
The “L” Project -
CircumVENTion-
A Unified Collision -
1-4
5-12
13-16
17-18
19-20
21-24
Dublin Bridge Park Mixed UseProject: Luxury retail, restaurant, and apartment develop-ment located in historic Dublin, OH - Seven story, 44 unit apartment building - 27,244 sq. ft.. office, restaurant, and retail center compliant with historic Dublin building code
Responsibilities: • Creation and management of the project design in Revit - Includes exterior architecture and interior unit design work• Production of SD-level packages and other essential drawings for client and city development meetings
Bob Evans’ Neighborhood CafeSpring 2014 - Re-envisioning Bob Evans
Purpose: Rebranding and redesigning a Bob Evans restaurant for a post-graduate consumer base in an urban infill site
Process: • Geographic research and brand analysis• Development of a design concept based around making a Bob Evans (BE) urban experience more versatile •BE Neighborhood Cafe’ appeal to urban customer lifestyle • Redesign of menu and restaurant layout enables ser-vice based on various customer time constraintsResult: Top Design Reviewed by Bob Evans Executive Team (further evaluation underway) and design was one of two chosen for publication by the Knowlton School
Raleigh
Columbus
San Diego
Houston
GIS WorkAnalysis of Bob Evans current locations in relation to post-graduate population centers using GIS data. Bob Ev-ans restaurants were primarily located in suburban areas, far away from concentrated areas of millennials located in downtown centers.
DesignDesign concept provides customers an easy direc-
tional choice upon entering the restaurant based on current preference. Those who need to grab-and-go can go to the left and order a quick sandwich, pastry, or coffee from the cafe, while those who would like to sit down can go to the right and or-der their customized sandwich from a touch screen order system. The varied seating types provide an easy choice of eating experience for the patron. There is also seating options for those who have
more time to socialize or work for a period of time.
“Bob’s Table” provides an anchor for the main dividing wall
Brushed Metal
Dark Granite
Ceramic Tile
Glass
Dark PaintedWood Panels
Gypboard Wall
Gypboard Wall
Gypboard Wall
Brushed Metal
Brick
“Bob’s Table” provides an anchor for the main dividing wall
Brushed Metal
Dark Granite
Ceramic Tile
Glass
Dark PaintedWood Panels
Gypboard Wall
Gypboard Wall
Gypboard Wall
Brushed Metal
Brick
So�t - Light Division Occupiable Wall - Intermediate Division Wall - Heavy Division
Central wall solidifies as patrons move deeper into the restaurant, directingcirculation in almost identical ways with regard to form on eachend of the wall.
Central wall immediately directs traffic upon entry, giving an option of a quick,grab-and-go meal, or a custom dine-in experience with multiple scales of seating.
EAST ELEVATION - 1’-1/4”
SOUTH ELEVATION - 1’-1/4”
Cafe Option
Sit-down Option
Model and Presentation ReactionThe model was created by laminating painted sheets of plexiglass to form the walls and sof-fits. Rich color was only applied in areas of design significance to highlight the choices made. The design was very well received by the Bob Evans design team and executives, citing that the smart and simple design addressed the current restaurants lack of adaptivity to a fast paced urban lifestyle. Bob Evans was also impressed with the changes made to the menu. BE recog-nized that the simplification of its current large and diverse menu made it easier for the consumer
to believe it’s freshness as authentic.
A Place for Many And Places for the Select FewFall 2012 - Student Housing Project
- Public Access
- CWRU Student Access
- Building Resident Access
Building#0
Site Plan Vertical Organization
Project: The “L” Project Pre Fab Housing
Purpose: Redesigning student housing to meet current needs given existing site constraints
Process: • Separate the building into three sep¬arate vertical zones• Development of restricted access to the upper levels to CWRU students and dorm residents• Establish an interstitial space on the lower levels allowing the surrounding community to mingle• Provide an additional layer to the vertical separation for access to the residence hall lounge space of each floor.
Result: This design utilizes the urban setting of the cam¬pus to integrate the community with the new housing facility.
Interstitial Zoning Diagram
Science Lab = Science Students
No Lounge Access = Apt. Floor
Fitness Center + Academic Center = Athletes
Computer Lab = Engineering & Computer Science Students
Kitchen
CWRU Dining HallCafe
Residence Hall
Fourth Floor Interstitial Zone
Ninth Floor
Interior Interstitial Zone
ESTCODE
DW
WO
The Project “ ”
Spring 2013 - Pre-Fab House
Purpose: Creating a pre-fabricated housing system which can adapt to a variety of family sizes.
Process: • Utilize an “L” shape module as a building block for the spaces.• The “L” module can interlock and be manip¬ulated to accommodate various spaces and sizes• Developed a central core, a courtyard creator, or other features in response to the topographical conditions Result: This design provides a multifamily housing concept in a small footprint across various terrains.
Ground Floor - 1’-1/24”
First Floor - 1’-1/24”
Second Floor - 1’-1/24”
42’28’
14’
14’
14’14’
28’14’
CircumVENTionSpring 2012 - Installation
Purpose: Create a pavilion that simulated or released a certain emotion.
Process: • Developed a wooden structure that simulated the build up and release of frustration.• Design of undulating walls which taper and rotate from the entrance, then expand quickly at the designat¬ed “re-lease point” • The foam noodles provide a physical outlet of release at the point of emotional overflow.
Result: This design was constructed and received positive reviews from the Knowlton Faculty
Initial Design inside KSA
A B C
E
A B C
E
D
A B C D E
A’ B’ C’ D’ E’
A Unified CollisionProject: Museum/architecture school in downtown Buenos Aires
Purpose: Create a building that represented the collision of culture at the site.
Process: • Organized con¬cepts to spatially organize the number of programs defined for the museum and the school• Developed a semi-transparent wall model• Conceived a concept of how the mu¬seum are bound together by colliding program and similar core structure, while still maintaining unique spacial qualities required by each individual program
Result: The design successfully integrated both the new and old in a consistent manner
A B C D E
A’ B’ C’ D’ E’
Spatial Wall - Plan
Spatial Wall - Void Creation
Spatial Wall - Sections
Airport
AirTraffic
Port Area
Port Traffic
Subway
Railway
Transfer Radius
Weaving Through the Center
Transportation Centers - Driving idea for model Wall model stretched to create wider spaces
Ground Floor1 - Reception2 - Studios3 - Print Lab4 - Acoustic Studio5 - Teaching Lab6 - Photography7 - Seminar Rooms8 - Large Classrooms9 - Researcher’s Spaces10 - Staff Lounge11 - Library12 - Cafe13 - Auditorium14 - Student Group Office15 - School Director Office16 - Conference Room17 - Museum Director Office18 - Staff Locker Room19 - Secondary Offices20 - Gallery Space21 - Outdoor Gallery Space
Second Floor1 - Small Classroom2 - Bathroom3 - Student Lounge4 - Small Fabrication Lab5 - Large Project Work Space6 - Library7 - Secondary Staff Offices8 - Short-Term Staff Offices9 - Studios10 - Gallery Space
Third Floor1 - Studios
Void Split in Half
Box Surrounded by Edge
Space Scaled Down from Walls
Box Unifies Wall
Spatial Boundary Intersections
Spatial creation wall influences weaving circulation, with a central bar uniting the entire structure
3
2
4
Ground Floor - 1”-500’ Scale
Third Floor - 1”-200’ Scale
6
1
5
7 7 7 7 8
8
9
10
11
12
13
114 14 14 15 16 16 17 18
19
19
20
11
1 1 1
2 2
34
5
6
7 7
8 8 8 8
9
10
1
AB
21