Post on 21-Jun-2020
transcript
DMG MORI LifeCycle Services
DMG MORI Academy
NC program converting service – Re-use your legacy programs
Highlights
+ Cut your programming time by up to 95 %
+ The know-how in your legacy programs is preserved
+ Quick and cost-effective production start-up when you switch to a new machine
+ Be ready for the future with current control system technology
For
SIEMENS
840D
You have many programs on legacy control systems, e. g. MillPlus, BOSCH, FANUC, SINUMERIK 840C, 810M / T. Do you want to use these programs on your new machine with the current SIEMENS 840D control system? Then save time and let us convert your programs now!
NC program converting service
Your time-saving service for all new machines with SIEMENS 840 D.
Highlights
+ New DMG MORI machines can immediately work effectively
+ Programs are quickly available
+ Cycles installed on the legacy machine are supported
+ Programs can be designed for special machines; special features are taken into account
+ Additional ramp-up support available from DMG MORI Academy trainers (e. g. for setting up workpieces)
+ Time-saving service, no additional personnel required to re-write the programs
+ Ideal for new machines with CELOS® from DMG MORI
from dmg mori
from dmg mori
NC program converting service
Use your legacy programs on your new machine with SIEMENS 840 D.
Currently supported output formats
+ Milling: MillPlus, legacy SIEMENS control systems, Philips 432 / 532, FANUC, Mazatrol (G-code), Okuma, Dialog 4 / 11 / 12, MITSUBISHI, iTNC / TNC (on request)
+ Turning: EPL, legacy SIEMENS control systems, HEIDENHAIN DINPLUS, Philips 432 / 532, FANUC, Mazatrol (G-code), Okuma, Indramat, MITSUBISHI
Project scope
+ Implementation of 535 programs (multi-channel!)
+ Three days to adapt the converter in the customer’s workshop
+ Two days to install the first programs on the customer’s machine (subject to a surcharge)
+ Conversion of all programs to this version
Reference project in the mechanical engineering industry
Conversion of 840C control programs to run on SIEMENS 840D Operate
GILDEMEISTER TWIN with 840C control system CTX beta 800 4A, Sinumerik 840D Operate
Your contact: Jörg Harings
Tel.: +49 (0) 52 05 / 74 25 04 joerg.harings@dmgmori.com
legacy programs
on new machines
Other
control systems
available
on request
DMG MORI Academy GmbHGildemeisterstraße 60, D-33689 BielefeldTel.: +49 (0) 52 05 / 74 - 25 01, Fax: +49 (0) 52 05 / 74 - 25 02training@dmgmori.com, www.dmgmori.com
FLY.
D70
44_1
216U
K
Sub
ject
to
mod
ific
atio
n. T
echn
ical
upd
ate
righ
ts r
eser
ved.
The
mac
hine
s de
pict
ed h
ere
may
incl
ude
som
e op
tion
s, e
quip
men
t an
d C
NC
alt
erna
tive
s.
www.dmgmori.comDMG MORI LifeCycle Services
PR
O.D
xxxx
_xxx
xUK
S
ubje
ct t
o te
chni
cal c
hang
es. T
he m
achi
nes
depi
cted
her
e m
ay f
eatu
re o
ptio
ns, a
cces
sori
es a
nd d
iffe
rent
con
trol
con
figu
rati
ons.
DMG MORI LifeCycle Services – more than just a machine.
Customised back-up for your DMG MORI machine. From service and spare parts to training and software to tool presetting and used machines – DMG MORI LifeCycle Services offers the right solution for each requirement!
For information around the clock, contact:
service-hotline.dmgmori.com
All products and services of the DMG MORI LifeCycle Services portfolio can be found online at: www.dmgmori.com
DMG MORI 24 / 7 Service Hotline – we solve up to 60 % of problems over the phone. Call us for immediate support.
DMG MORI Replacement Parts – Efficient logistics, rapid delivery times, > 95 % replacement parts availability. Order on our 24 / 7 Service Hotline.
DMG MORI Service – Maintenance, repairs or preventive servicing. You can depend on our certified technicians.
DMG MORI Training – Turbocharge your productivity and professional knowledge. Get the maximum out of your machine.
Unique product portfolio – our expertise for your productivity!
DMG MORI Services GmbHGildemeisterstraße 60, D-33689 BielefeldTel.: +49 (0) 5205 / 74 3155, Fax: +49 (0) 5205 / 74 45 3155info@dmgmori.com, www.dmgmori.com