Drilling Systems Automation Roadmap - Update

A independently organized, volunteer based, cross industry initiative mapping the future of drilling

systems automation

DSA Roadmap Industry Initiative

John de Wardt CEng, Fellow IMechE DE WARDT AND COMPANY Program Manager: Drilling Systems Automation Roadmap Industry Initiative

Affiliated with

Program Manager: John de Wardt, DE WARDT AND CO Deputy Program Manager: Ed Tovar, InTechSys

• Mark Andersen (Shell) • Eric Cayeux (IRIS) • Amanda DiFiore (Qinetiq) • Blaine Dow (MI Swaco) • Clay Flannigan (SWRI) • Slim Hbaieb

(Schlumberger) • Calvin Inabinett

(Aerospace Rocketdyne) • Moray Laing (SAS / SPE

DSATS)

• Terry Loftis (Transocean / IADC ART),

• Robin Macmillan (NOV) • John Macpherson (Baker

Hughes / SPE DSATS) • Mark Miller (Gyrodata) • Bob Moran (Halliburton) • Randy Mutch (Ensign) • Lindsay Voss (AUVSI) • Mario Zamora (MI Swaco)

IADC ART Conference Galveston Sept 2014

Presenter: John de Wardt

Phase I - Volunteer Driven

Phase PII – In Development Manufacturing wells?

And / Or Complex wells?

Based on Sandia National Laboratories Program IADC ART Conference Galveston Sept 2014

Presenter: John de Wardt

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Needs for a Roadmap • Fragmented industry structure requires plan

for interoperability • Define supplier opportunities

• Consensus description of DSA, how it will develop and deliver value

• Attract investment

• Entry of non-oil and gas industry players • Alternative technologies

• Overcome fear of changes to personnel

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Eight Challenges have been defined Teams led by committee member – 50 participants overall

A. Systems Architecture B. Communications C. Sensors, Instrumentation &

Measurement D. Drilling Machines and Equipment E. Control Systems F. Simulation Systems and

Modelling G. Human Factors H. Certification and Industry

Standards

Systems Architecture

States = situational awareness: • Well State • Drilling and Completion State • Automation State • Others – Weather, …

Use Cases define each system / subsystem

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Communications

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Sensors, Instrumentation & Measurement

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Drilling Machines and Equipment

Drilling machines and equipment are not an impediment to drilling systems automation progress

A shale drilling DSA solution combined with manufacturing processes will enable development of advanced drilling machines

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Control Systems

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Simulation Systems and Modelling Exhaustive (but not complete) list: 1. Torque and Drag 2. Rate of Penetration 3. Seismic (1D – 4D) 4. Mechanical Earth Model 5. Shock and Vibration 6. Pore Pressure 7. Wellbore Survey 8. Anti-collision model 9. Casing load model 10. BHA prediction model 11. Drill bit cutting model 12. Well control simulation 13. Cement displacement model 14. Well Placement 15. Hydraulics models (fluid

properties, ECD prediction, hole cleaning)

16. Drilling Hazards IADC ART Conference Galveston Sept 2014

Presenter: John de Wardt

Human Factors

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Certification and Industry Standards

• Technology may come first, followed by the standards, certification, and regulation

• International Society of Automation (ISA) standards that have applicability

• ISA-5 (instrument symbols) • ISA-18 (alarm systems) • ISA-20 (instruments) • ISA-84 (safety instrumented systems; overlap with IEC-61508 &

61511) • ISA-88 (batch control) • ISA-95 (enterprise – control systems integration) • ISA-99 (control systems security) • ISA-100 (wireless) • ISA-101 (human machine interface)

• Creating new standards with Energistics (DSATS)

Continuing the work As a Cross Industry Initiative

Delivery Phase I • Paper and Presentation

SPE / IADC Drilling Conference; London, England – March 2015

Planning Phase II • Next level of detail • Requires analysis and

validation • Stakeholders reviews &

adoption

• Industry Roadmaps require funding

• Value across the industry and connecting to other industries

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt

Thank you

Follow us at: http://www.iadc.org/dsaroadmap

http://connect.spe.org/DSARoadmap/Home/

IADC ART Conference Galveston Sept 2014 Presenter: John de Wardt