Post on 15-Jan-2016
description
transcript
1
CONTENT
• All the performance curves shown in this catalogue are according ISO 9906 Annex A.
Self priming centrifugal pump in AISI 304 JES - JE 2
Self priming centrifugal pump in AISI 304 JESX-JEX 4
Self priming centrifugal pump in cast iron AGE-AGF 6
Self priming pump in cast iron AGA-AGC 8
Single impeller centrifugal pumps in AISI 304 CD 10
Twin impeller centrifugal pumps in AISI 304 2CD 15
Single impeller centrifugal pumps in AISI 304 CDX 19
Twin impeller centrifugal pumps in AISI 304 2CDX 24
Peripheral pumps in cast iron PRA 30
Horizontal centrifugal multistage pumps COMPACT 32
Vertical centrifugal multistage pumps CVM 34
Vertical centrifugal multistage pumps MULTIGO 36
Vertical multistage centrifugal pumps in AISI 304 EVM 38
Centrifugal pumps - open impeller in AISI 304 DWO 53
Single impeller centrifugal pump in cast iron CMA-CMB-CMC-CMD-CMR 55
Twin impeller centrifugal pumps in cast iron CDA 61
Centrifugal pumps according EN 733 (ex DIN 24255) in AISI 304 and AISI 316L SERIE 3-3L 63
Monoblock centrifugal pumps EN 733 (ex DIN 24255) in cast iron MD-MMD 90
4” Borehole centrifugal pumps WINNER 99
4” Borehole centrifugal pumps in AISI 304 4BHS 105
5” Submersible centrifugal multistage pumps IDROGO 113
6” Borehole centrifugal pumps SF6 115
6” Borehole centrifugal pumps in AISI 304 6BHS 117
Submersible sump pumps KIKA 125
Submersible sump pumps BEST ZERO 126
Submersible sump pumps in AISI 304 BEST ONE 128
Submersible sump pumps in AISI 304 BEST 2-3-4-5 130
Submersible pumps for dirty water RIGHT 132
Submersible pumps for sewage water DW-DW VOX 134
Submersible pumps for dirty water DML 136
In-line centrifugal pumps in AISI 304 LPS 143
In-line centrifugal pumps in cast iron LPC-LPCD 149
Three speed circulators MR 163
Four speed circulators and electronic circulators ETHERMA-ETHERMA E 164
Automatic lifting stations BEST BOX-MINIRIGHT-SANIRELEV 167
Booster units GP-GP INOX 168
Pressure sets 2GP - 3GP - GPE 170
Control boxes 171
2
JES-JESELF PRIMING PUMPS in AISI 304
DIMENSIONAL TABLESPump type Dimensions (mm)
Single-phaseJESM 5JESM 6JESM 8
Three-phaseJES 5JES 6JES 8
1~181181181
3~177177177
1~969696
3~929292
5,65,86
WeightA L kg
Pump type Dimensions (mm)
Single-phaseJEM 80
JEM 100JEM 120JEM 150
Three-phaseJE 80
JE 100JE 120JE 150
1~209209209214
3~205205205214
1~105105105110
3~101101101110
401432432439
100100100120
130130130150
120120120140
150150150170
213,5228,5228,5231
128143143
145,5
1213,513,515,5
WeightA B L M M1 N N1 R W kg
SPECIFICATIONS• Maximum working pressure: 6 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 45°C for other uses
MATERIALS• Pump body, bracket, casing cover, motor casing
and fan cover in AISI 304• Shaft in AISI 303• Impeller in AISI 304 for JE, in tecnopolymer for JES• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• T.E.F.C. 2 poles motor• Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNA 1” for JES, 1”1/4 for JE• DNM 1”
Self-priming Jet pumps manufactured in stainless steel AISI 304, suitable for water supply, domes-tic pressure boosting and small irrigation systems, pool and tank emptying and general clean waterpumping.
JES JE
3
JES-JE
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
JESM 5JESM 6JESM 8JEM 80
JEM 100JEM 120JEM 150
µF VcThree-phase230/400V 50Hz
JES 5JES 6JES 8JE 80
JE 100JE 120JE 150
0,370,440,60,6
0,750,881,1
2,12,43,04,76,46,77,6
1,51,9
2,253,34,54,75,6
0,851,11,31,92,62,73,3
2831,5373943
47,556
23262933374149
20222529
33,537
44,5
151720
26,53034
40,5
11,513,516252832
38,5
---
23,527
30,537
---
20,524
27,534
---
1821
24,531
------
29,5
1010
12,5162020
31,5
450450450450450450450
230V 400VSingle-phase
Three-phase l/minm3/h
50,3
201,2
301,8
402,4
452,7
503
603,6
704,2
754,5
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
SELF PRIMING PUMPS in AISI 304
4
JESX-JEXSELF PRIMING PUMPS in AISI 304
SPECIFICATIONS• Maximum working pressure:6 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 60°C for other uses
MATERIALS• Pump body, casing cover in AISI 304• Shaft in AISI 303• Impeller in AISI 304 for JEX, in tecnopolymer for JESX• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor• Insulation class F• Protection degree IP54 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user for three-phase version • DNA 1” for JESX, 1”1/4 for JEX• DNM 1”
Self priming electropump manufactured in stainless steel AISI 304 suitable for water supply, domes-tic pressure boosting and small irrigation systems, pool and tank emptying and general clean water pumping.
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseJEXM 80JEXM 100JEXM 120JEXM 150
Three-phaseJEX 80JEX 100JEX 120JEX 150
417417417445
230230230250
215215215240
50505055
206206206216
38383840
120120120140
160160160180
206206206
203,5
PG11PG11PG11
PG13,5
143143143
145,5
10,510,811,514,1
WeightB C H3 H4 M M1 N N1 R T W kg
JESX JEX
Pump type
JESXM 5JESXM 6JESXM 8
JESX 5JESX 6JESX 8
5.15.56.1
Weightkg
[1] : 3 ˜[2] : 1 ˜
Single-phase Three-phase
5
XXX
X
X
X
X
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
JESXM 5JESXM 6JESXM 8JEXM 80
JEXM 100JEXM 120JEXM 150
µF VcThree-phase230/400V 50Hz
JESX 5JESX 6JESX 8JEX 80
JEX 100JEX 120JEX 150
0,370,440,60,6
0,750,881,1
2,12,43,04,76,46,78,0
1,51,92,33,34,54,75,6
0,851,11,31,92,62,73,3
2831,5373943
47,556
23262933374149
20222529
33,537
44,5
151720
26,53034
40,5
11,513,516252832
38,5
---
23,527
30,537
---
20,524
27,534
---
1821
24,531
------
29,5
1010
12,5162020
31,5
450450450450450450450
230V 400VSingle-phase
Three-phase l/minm3/h
50,3
201,2
301,8
402,4
452,7
503
603,6
704,2
754,5
H=Total head
PERFORMANCE TABLE
JESX-JEXSELF PRIMING PUMPS in AISI 304
PERFORMANCE CURVES (according to ISO 9906 Annex A)
6
AGE-AGFSELF PRIMING PUMPS in cast iron
SPECIFICATIONS• Maximum working pressure:6 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 45°C for other uses
• Maximum suction: 8 mts
MATERIALS• Pump body in cast iron • Casing cover in AISI 304• Shaft in AISI 416• Impeller, nozzle and diffuser in tecnopolymer • Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNA-DNM 1”
DIMENSIONAL TABLE
Pump type Dimensions (mm)
Single-phaseAGE 0.50 MAGE 0.60 MAGE 0.80 MAGF 0.60 MAGF 0.80 M
Three-phaseAGE 0.50 TAGE 0.60 TAGE 0.80 TAGF 0.60 TAGF 0.80 T
150150150180180
352352352377377
17,317,317,310,310,3
99,599,599,5127127
193193193191191
88899
160160160185185
122122122152152
3838383333
3~172,5172,5172,5187,5187,5
1~174174174189189
110110110140140
150150150180180
111111111129129
A B C D E F H H1 H2 H3 H4 N N1 R
2424241212
W
88,591112
Weightkg
Self-priming jet pumps produced in cast iron, suitable for water supply, domestic pressure boostingand small irrigation systems, pool and tank emptying and general clean water pumping.
[1] : 3 ˜[2] : 1 ˜
7
AGE-AGFSELF PRIMING PUMPS in cast iron
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
AGE 0.50 MAGE 0.60 MAGE 0.80 MAGF 0.60 MAGF 0.80 M
µF VcThree-phase230/400V 50Hz
AGE 0.50 TAGE 0.60 TAGE 0.80 TAGF 0.60 TAGF 0.80 T
0,370,450,60,450,6
2,42,752,83
3,7
22
2,12,12,4
1,11,11,21,21,4
3234,537
33,842
28,429,932,730,237,9
22,422,825,623,530,7
17,617,920,517,324,8
14,114,916,811,720
12,714
15,5918
10101010
12,5
450450450450450
230V 400V1~ 3~ l/min
m3/h5
0,3100,6
201,2
301,8
402,4
452,7
H=Total head
PERFORMANCE CURVES (according to ISO 9906 Annex A)
PERFORMANCE TABLE
8
AGA-AGCSELF PRIMING PUMPS in cast iron
SPECIFICATIONS• Maximum working pressure:
6 bar for AGA 0.60-0.75-1.0010 bar for the other models
• Maximum liquid temperature: 35°C according EN 60335-2-41 for domestic uses 45°C for other uses
• Maximum suction: 8 m
MATERIALS• Pump body in cast iron • Casing cover in AISI 304 for AGA 0.60-0.75-1.00• Shaft in AISI 416 for AGA 0.60-0.75-1.00,
in AISI 303 for the other models• Impeller in tecnopolymer for AGA 0.60-0.75-1.00,
in brass for the other models• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version• DNA 1” for AGA 0.60-0.75-1.00• DNA 1” 1/2 for the other models • DNM 1”
Self priming electropump made in cast iron suitable domestic pressure boosting, small irrigation, gar-dening, car washing, tanks and pools emptying and pumping clear water in general.
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseAGA 0.60 MAGA 0.75 MAGA 1.00 MAGA 1.50 MAGA 2.00 M
-AGC 1.50 MAGC 2.00 M
-
Three-phaseAGA 0.60 TAGA 0.75 TAGA 1.00 TAGA 1.50 TAGA 2.00 TAGA 3.00 TAGC 1.50 TAGC 2.00 TAGC 3.00 T
180180180220220220220220220
1~405405405495508
-495508
-
195195195244244244244244244
10,310,310,3101010101010
3~.405405405495495508495495508
127127127157157157157157157
999
101010101010
185185185223223223223223223
152152152170170170170170170
333333535353535353
3~197,5197,5197,5229229229229229229
1~199199199247247
-247247
-
404040484848484848
140140140180180180180180180
A B C D E F H H1 H2 H3 H4 M N
180180180220220220220220220
N1 R T W S DNA
128,5128,5128,5167,5167,5167,5167,5167,5167,5
1~PG11PG11PG11
PG13,5PG13,5
-PG13,5PG13,5
-
11,811,811,815,515,515,515,515,515,5
9,59,59,5999999
G 1G 1G 1
G 11/2
G 11/2
G 11/2
G 11/2
G 11/2
G 11/2
12,51314262727262727
Weightkg
[1] : 3 ˜[2] : 1 ˜
9
AGA-AGCSELF PRIMING PUMPS in cast iron
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
AGA 0.60 MAGA 0.75 MAGA 1.00 MAGA 1.50 MAGA 2.00 M
-AGC 1.50 MAGC 2.00 M
-
µF VcThree-phase230/400V 50Hz
AGA 0.60 TAGA 0.75 TAGA 1.00 TAGA 1.50 TAGA 2.00 TAGA 3.00 TAGC 1.50 TAGC 2.00 TAGC 3.00 T
0,440,550,751,11,52,21,11,52,2
3,14,05,58,19,8-
8,610,5
-
2,12,83,65,36,37,95,86,87,9
1,21,62,13,03,64,73,33,94,6
3745
47,5------
33,442,845485968
38,55158
27,137,940,345,155,664,337
49,955,6
2232
35,742,452,260,835,648,853,5
16,521,929,138,647,355,933,546,950,1
-1827
37,445,754,432,746,349,1
--
2335,142,551,631,444,947,1
---
30,836,446,428,742
43,4
---
2730,542
26,138,740,2
------
22,433,235,9
------
1927
32,5
12,514203540-
3540-
450450450450450
-450450
-
230V 400VSingle-phase
Three-phase l/minm3/h
50,3
100,6
201,2
301,8
452,7
503
603,6
804,8
1006
1307,8
1609,6
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
10
CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 60°C for other uses of CD 70/05-70/07-90/1090°C for other models
MATERIALS• Pump body, impeller, diffuser, casing cover, bracket, shaft,
motor casing and fan cover in AISI 304• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version• DNA 1”1/2 for CD200, DNA 1”1/4 for the other models• DNM 1”
Single impeller centrifugal pumps manufactured from stainless steel AISI 304, suitable for water sup-ply, treatment & irrigation. Air conditioning systems and general water pumping including moderate-ly aggressive liquids
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseCDM 70/05CDM 70/07CDM 70/12CDM 90/10
CDM 120/07CDM 120/12CDM 120/20CDM 200/12CDM 200/20
Three-phaseCD 70/05CD 70/07CD 70/12CD 90/10
CD 120/07CD 120/12CD 120/20CD 200/12CD 200/20CD 200/25
1~210210218210210206226206214
-
3~206206218206206206226206214226
229229250229229229250229229250
106106118106106106118106106118
298298328328298328356328356366
123123132123123123132123123132
1~ 102102102102102102110102110
-
3~106106102106106102110102110110
1~ 100100100100100100100100120
-
3~100100100100100100100100120120
1~130130130130130130130130150
-
3~130130130130130130130130150150
120120120120120120120120140140
150150150150150150150150170170
A B H H1 H2 L M M1 N N1
101101131131101101131131133138
R W DNA
636393936363939395
100
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/2
G 1 1/2
G 1 1/2
9,410,814,112,410,713,317,312,716,717,4
Weightkg
11
CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CDM 70/05CDM 70/07CDM 70/12CDM 90/10CDM 120/07CDM 120/12CDM 120/20CDM 200/12CDM 200/20
µF VcThree-phase230/400V 50Hz
CD 70/05CD 70/07CD 70/12CD 90/10CD 120/07CD 120/12CD 120/20CD 200/12CD 200/20CD 200/25
0,370,550,90,750,550,91,50,91,51,8
3,14,66,55,64,66,99,76,39,8-
2,43,55,04,03,24,97,04,77,08,6
1,42,02,92,31,852,84,02,74,05,0
20,72835
30,3------
18,424,531,227,220,529,537,5
---
15,920,526,523,618,727,135,320,63138
15--
22,318,126,134,620,230,637,5
---
19,516,824,333,119,529,736,4
----
15,522,431,418,528,935,3
----
13,719,528,617,127,533,6
----
12,5--
16,126,632,4
-------
14,625,130,5
-------
12,52328
12,516
31,52016
31,540
31,540-
450450450450450450450450450
-
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
503
804,8
905,4
1106,6
1307,8
1609,6
18010,8
21012,6
25015
H=Total head
PERFORMANCE CHART (according to ISO 9906 Annex A)
PERFORMANCE TABLE
12
CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
PERFORMANCE CURVES CD 70-90 series (according to ISO 9906 Annex A)
13
CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
PERFORMANCE CURVES CD 120 series (according to ISO 9906 Annex A)
14
CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
PERFORMANCE CURVES CD 200 series (according to ISO 9906 Annex A)
15
2CDCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 60°C for other uses
MATERIALS• Pump body, impeller, diffuser, casing cover, bracket, shaft,
motor casing and fan cover in AISI 304• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM 1” - DNA 1”1/4
Twin impeller centrifugal pumps manufactured from stainless steel AISI 304, suitable for water sup-ply, treatment and irrigation. Air conditioning systems and general water pumping including moder-ately aggressive liquids
DIMENSIONAL TABLE
Pump type Dimensions (mm)
Single-phase2CDM 70/102CDM 70/122CDM 70/152CDM 70/202CDM 120/152CDM 120/20
Three-phase2CD 70/102CD 70/122CD 70/152CD 70/202CD 120/152CD 120/20
1~210206226214214214
3~206206226214214214
3~363363393393393393
229229229229229229
1~363363375393375393
106106106106106106
123123123123123123
1~106102110110110110
3~102102110110110110
100100120120120120
130130150150150150
120120140140140140
150150170170170170
164164170170170176
A B H H1 H2 L M M1 N N1 R
939395959595
W
1~14
14,717,819,816,117,8
3~14
14,717,818,815,817,5
Weightkg
16
2CDCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
2CDM 70/102CDM 70/122CDM 70/152CDM 70/202CDM 120/152CDM 120/20
µF VcThree-phase230/400V 50Hz
2CD 70/102CD 70/122CD 70/152CD 70/202CD 120/152CD 120/20
0,750,91,11,51,11,5
5,87,08,1
10,08,3
10,2
4,05,05,67,05,67,0
2,32,93,34,03,34,0
38,544,552,560--
35,340,348
55,642
51,5
31,535,542,850,441
49,5
2730
36,544
39,547,4
----
3541,8
----
3036,5
2031,535403540
450450450450450450
230V 400VSingle-phase
three-phase l/minm3/h
201,2
402,4
603,6
804,8
1207,2
1509
H=Total head
PERFORMANCE TABLE
PERFORMANCE CHART (according to ISO 9906 Annex A)
17
2CDCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
PERFORMANCE CURVES 2CD 70 series (according to ISO 9906 Annex A)
18
2CDCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
PERFORMANCE CURVES 2CD 120 series (according to ISO 9906 Annex A)
19
CDXCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 60°C for other uses of CDX 70/05-70/07-90/1090°C for other models110° for H version
MATERIALS• Pump body, impeller, diffuser and casing cover in AISI 304• Shaft in AISI 303• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNA 1”1/2 for CDX200, DNA 1”1/4 for the other models• DNM 1”
Single impeller centrifugal pumps with hydraulic components manufactured from stainless steel AISI304, suitable for pressure boosting, water supply, treatment & irrigation. Air conditioning systems andgeneral water pumping including moderately aggressive liquids
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseCDXM 70/05CDXM 70/07CDXM 90/10
CDXM 120/07CDXM 120/12CDXM 120/20CDXM 200/12CDXM 200/20
Three-phaseCDX 70/05CDX 70/07CDX 90/10
CDX 120/07CDX 120/12CDX 120/20CDX 200/12CDX 200/20CDX 200/25
208208208208208232208208232
1~
318318318318318345318345
-
178178178178178199178199199
229,5229,5229,5229,5229,5250
229,5229,5250
3~
318318318318318345318345345
106106106106106118106106118
123,5123,5123,5123,5123,5132
123,5123,5132
209209209209209235209223235
215215215215215253215240
-
505050505055505555
383838383840384040
120120120120120140120140140
160160160160160180160180180
108108108108108
105,5108
105,5105,5
A B C H H1 H2 H3 H4 M M1 N N1 R
PG11PG11PG11PG11
PG13,5PG13,5PG13,5PG13,5
-
T W DNA
92,592,592,592,592,595
92,59595
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/2
G 1 1/2
G 1 1/2
Single-phase9,110,411,910,412,517,216,315,3
-
Three-phase9,110,411,910,412,516,211,414,217
Weightkg
20
CDXCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CDXM 70/05CDXM 70/07CDXM 90/10CDXM 120/07CDXM 120/12CDXM 120/20CDXM 200/12CDXM 200/20
µF VcThree-phase230/400V 50Hz
CDX 70/05CDX 70/07CDX 90/10CDX 120/07CDX 120/12CDX 120/20CDX 200/12CDX 200/20CDX 200/25
0,370,550,750,550,91,50,91,51,8
3,14,65,64,66,99,36,310,7
-
2,43,54,03,25,27,04,77,08,2
1,42,02,31,93,04,02,74,04,8
20,728
30,3------
18,424,527,220,529,537,5
---
15,920,523,618,727,135,320,63138
15-
22,318,126,134,620,230,637,5
--
19,516,824,333,119,529,736,4
---
15,522,431,418,528,935,3
---
13,719,528,617,127,533,6
---
12,5--
16,126,632,4
------
14,625,130,5
------
12,52328
12,5162016
31,540
31,540-
450450450450450450450450
-
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
503
804,8
905,4
1106,6
1307,8
1609,6
18010,8
21012,6
25015
H=Total head
PERFORMANCE TABLE
PERFORMANCE CHART (according to ISO 9906 Annex A)
21
CDXELETTROPOMPE CENTRIFUGHE MONOGIRANTE in AISI 304
PERFORMANCE CURVES CDX 70-90 series (according to ISO 9906 Annex A)
22
CDXCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
PERFORMANCE CURVES CDX 120 series (according to ISO 9906 Annex A)
23
CDXCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304
PERFORMANCE CURVES CDX 200 series (according to ISO 9906 Annex A)
24
2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 60°C for other uses110° for H version
MATERIALS• Pump body, impeller, diffuser and casing cover in AISI 304• Shaft in AISI 304• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1 230V ± 10% 50Hz, 3 230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version• DNA 1”1/2 for 2CDX200
DNA 1”1/4 for the other models• DNM 1”
Twin impeller centrifugal pumps with hydraulic components constructed in stainless steel AISI 304,suitable for pressure boosting, water supply, water treatment & irrigation. Air conditioning systemsand general water pumping including moderately aggressive liquids
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phase2CDXM 70/102CDXM 70/122CDXM 70/152CDXM 70/202CDXM 120/152CDXM 120/20
-----
Three-phase2CDX 70/102CDX 70/122CDX 70/152CDX 70/202CDX 120/152CDX 120/202CDX 120/302CDX 120/402CDX 200/302CDX 200/402CDX 200/50
208208232232208208232232208232232
355355380385380380390420394420445
12,512,512,512,512,512,512,512,512,512,516,0
888888888813
182182199199199199
209,5231,5210
231,5231,5
229229250250229229250250229250250
106106118118106106118118106118118
123123132132123123132132123132132
1~
209209235235223223240240240240252
3~
215215249249237237
-----
5050555555556565656568
3838404040404040404050
120120140140140140140140140140160
160160180180180180180180180180210
A CB D E H H1 H2 H3 H4 M M1 N N1
142,5142,5140140140140145145145145145
R T V W S DNA
1~
PG11PG11
PG13,5PG13,5PG13,5PG13,5
-----
3~
PG11PG11PG11PG11PG11PG11
PG13,5PG13,5PG13,5PG13,5PG16
9393
95,595,595,595,5110,5110,5110,5110,5110,0
999999999912
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/4
G 1 1/2
G 1 1/2
G 1 1/2
Single-phase13,514,217,418,615,518,0
-----
Three-phase13,313,816,418,215,316,923,226,425,025,032,7
Weightkg
25
2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
2CDXM 70/102CDXM 70/122CDXM 70/152CDXM 70/202CDXM 120/152CDXM 120/20
-----
µF VcThree-phase230/400V 50Hz
2CDX 70/102CDX 70/122CDX 70/152CDX 70/202CDX 120/152CDX 120/202CDX 120/302CDX 120/402CDX 200/302CDX 200/402CDX 200/50
0,750,91,11,51,11,52,23,02,23,03,7
6,07,08,09,98,310,2
-----
4,05,05,67,05,67,08,710,810,411,415
2,32,93,24,03,24,05,06,26,06,68,7
38,544,552,560-------
35,340,348
55,642
51,559
68,5---
31,535,542,850,441
49,557
66,552
62,571,5
2730
36,544
39,547,454,664
50,861,170,1
----
3541,849,258
48,15867
----
3036,54452
45,555,264,3
--------
42,752,361,2
--------
39,549
57,5
2031,535403540-----
450450450450450450
-----
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
402,4
603,6
804,8
1207,2
1509
18010,8
21012,6
H=Total head
PERFORMANCE TABLE
PERFORMANCE CHART (according to ISO 9906 Annex A)
26
2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
PERFORMANCE CURVES series 2CDX 70 (according to ISO 9906 Annex A)
27
2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
PERFORMANCE CURVES 2CDX 120 series (according to ISO 9906 Annex A)
28
2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304
PERFORMANCE CURVES 2CDX 200 series (according to ISO 9906 Annex A)
30
PRAPERIPHERAL PUMPS in cast iron
SPECIFICATIONS• Maximum working pressure: 6 bar for PRA 0.50
7,5 bar for PRA 0.80 and 12 bar for the other models • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 80°C for other uses
MATERIALS• Pump body and bracket in cast iron• Shaft in C10 for PRA 0.50 version
AISI 303 for the other models• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM-DNA 1”
Peripheral turbine pumps constructed from cast iron and bronze suitable for domestic uses, hot andcold water boosting and pressure boilers feeding.
DIMENSIONAL TABLEPump type Dimensions (mm) Weight (kg)
PRA 0.50MPRA 0.50TPRA 0.80MPRA 0.80TPRA 1.00MPRA 1.00TPRA 1.50MPRA 1.50TPRA 2.00MPRA 2.00T
130 263.5 148.5 10 50 7 143 63 80 - 160 100 23 100 120 118.5 PG11 69 7130 263.5 148.5 10 50 7 143 63 80 149.5 - 100 23 100 120 118.5 - 69 7130 290.5 159.3 11 53.8 9 161 71 90 - 178 112 25 112 135 122 PG11 69 7150 290.5 159.3 11 53.8 9 161 71 90 167.5 - 112 25 112 135 122 - 69 7150 290.5 159.3 11 53.8 9 161 71 90 - 178 112 25 112 135 122 PG11 69 7150 290.5 159.3 11 53.8 9 161 71 90 167.5 - 112 25 112 135 122 - 69 7162 330.5 188 12 57 12 175 80 95 - 212 124 28 125 152 144 PG13.5 88 9162 330.5 188 12 57 12 175 80 95 186.5 - 124 28 125 152 144 88 9162 330.5 188 12 57 12 175 80 95 - 212 124 28 125 152 144 PG13.5 88 9162 330.5 188 12 57 12 175 80 95 186.5 - 124 28 125 152 144 - 88 9
5.65.69.29.29.79.714.514.515.815.8
A CB D E F H H1 H2 H3 H4 M M1 N N1 R T W S
[1] = 3∼[2] = 1∼
31
PRAPERIPHERAL PUMPS in cast iron
d l
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Q=Capacity
PRA 0.50M PRA 0.50T 0.37 10 450 37 33.3 28.7 23.7 5 - - -PRA 0.80M PRA 0.80T 0.6 16 450 56 50.7 45.1 39.8 25 12 - -PRA 1.00M PRA 1.00T 0.75 20 450 62 54.4 47 40.4 24.3 13 - -PRA 1.50M PRA 1.50T 1.1 35 450 - 81 76.9 71.9 55.8 37.9 18 -PRA 2.00M PRA 2.00T 1.5 40 450 - 88 82.9 77 59.8 43.3 27.4 22
l/minm3/h
50.3
100.6
150.9
201.2
352.1
503
653.9
704.2
H=Total head
PERFORMANCE TABLE
Single-phase230V 50Hz
Three-phase230/400V 50Hz
µF Vc
32
COMPACTHORIZONTAL CENTRIFUGAL MULTISTAGE PUMPS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
MATERIALS• Pump body and bracket in cast iron • External casing in AISI 304• Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM 1” – DNA 1”1/4 for COMPACT B/12 and B/15,
1” for other models
Horizontal centrifugal multistage pumps suitable for pressure boosting systems,car washing, smallgarden irrigation and general clean water pumping.
COMPACT
DIMENSIONAL TABLE
Pump type Dimensions (mm)
Single-phaseCOMPACT AM/4COMPACT AM/6COMPACT AM/8COMPACT AM/10COMPACT AM/12COMPACT AM/15COMPACT BM/12COMPACT BM/15
Three-phaseCOMPACT A/4COMPACT A/6COMPACT A/8COMPACT A/10COMPACT A/12COMPACT A/15COMPACT B/12COMPACT B/15
1~
183,5183,5183,5193,5193,5193,5193,5193,5
3~
159159159169169169169169
82108134142168194116142
51,551,551,569,569,569,569,569,5
307,5333,5359,5426452490400438
120,5146,5172,5198,5224,5250,5172,5198,5
127,5127,5127,5123,5123,5123,5123,5123,5
38,538,538,542,542,542,542,542,5
6262628080808080
120,5146,5172,5180,5206,5232,5154,5180,5
G1G1G1G1G1G1
G1 1/4
G1 1/4
8,49,310,314,515,516,714,915,9
WeightA B C D E H1 H2 M R DNA kg
33
COMPACT
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
COMPACT AM/4COMPACT AM/6COMPACT AM/8COMPACT AM/10COMPACT AM/12COMPACT AM/15COMPACT BM/12COMPACT BM/15
µF VcThree-phase230/400V 50Hz
COMPACT A/4COMPACT A/6COMPACT A/8
COMPACT A/10COMPACT A/12COMPACT A/15COMPACT B/12COMPACT B/15
0,30,440,6
0,750,91,10,91,1
2,53,04,06,06,27,35,87,3
1,92,32,64,24,75,74,75,9
1,11,31,52,42,43,32,73,4
213140576879--
18,728,236,153
63,474,647,558
16,725,232
48,658,469,145,956
14,421,827,443,452,362,343,754
11,918
22,437,144,954
41,351,5
69
10,5202428
35,244,5
------
27,634,5
------
1822
1012,51420
31,531,531,531,5
450450450450450450450450
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
301,8
402,4
503
603,6
804,8
1006
1207,2
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
HORIZONTAL CENTRIFUGAL MULTISTAGE PUMPS
34
CVM AM/4 63 355 112 116 92 113 11,0 11,0CVM AM/6 63 381 138 116 92 113 11,7 11,6CVM AM/8 63 407 164 116 92 113 12,7 12,6CVM AM/10 71 468 190 137 101 122 16,5 16,6CVM AM/12 71 494 216 137 101 122 17,5 17,6CVM AM/15 71 531 242 137 101 122 18,5 18,6CVM BM/10 71 416 138 137 101 122 15,9 15,9CVM BM/12 71 442 164 137 101 122 16,8 16,7CVM BM/15 71 479 190 137 101 122 18,0 17,9
CVMVERTICAL CENTRIFUGAL MULTISTAGE PUMPS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
MATERIALS• Pump body and bracket in cast iron • External casing in AISI 304• Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM – DNA 1”1/4
Vertical centrifugal multistage pumps suitable for pressure boosting systems, car washing, irrigationand general clean water pumping. Reliable and noiseless pumps.
CVM
DIMENSIONAL TABLE
Pump type Dimensions (mm) WeightMW
Motor B H Ø [1] [2] Kg.
[1] Only for three-phase[2] Only for single-phase
35
------
14,719,624,5
CVM
Pump type
kW HP
Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CVM AM/4CVM AM/6CVM AM/8CVM AM/10CVM AM/12CVM AM/15CVM B/10CVM B/12CVM B/15
µF VcThree-phase230/400V 50Hz
CVM A/4CVM A/6CVM A/8CVM A/10CVM A/12CVM A/15CVM B/10CVM B/12CVM B/15
0,30,440,6
0,750,91,1
0,750,91,1
0,40,60,81
1,21,51
1,21,5
2,63,24,06,06,57,25,66,27,4
1,92,32,84,04,85,74,14,75,5
1,91,31,62,32,83,32,42,73,2
21,231,842,457,569,080,5
---
19,729,539,454,064,875,636,248,260,3
17,826,735,649,559,469,335,146,858,5
15,623,231,143,752,461,133,745,056,2
13,019,425,936,643,951,232,042,653,3
6,49,612,819,523,427,327,536,645,8
------
21,628,836,0
1012,51420
31,531,520
31,531,5
450450450450450450450450450
230V 400VSingle-phase
Three-phase l/min 0m3/h 0
201,2
301,8
402,4
503
603,6
804,8
1006
1207,2
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
VERTICAL CENTRIFUGAL MULTISTAGE PUMPS
Power
23,835,747,662,575,087,538,150,863,5
36
MULTIGOVERTICAL CENTRIFUGAL MULTISTAGE PUMPS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
MATERIALS• Pump body, casing cover, external casing
and motor casing in AISI 304 • Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• Asincronous 2 poles motor cooled by the pumped liquid• Insulation class F• Protection degree IP68 • 1~230V ± 10% 50Hz, 3~400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNA- DNM 1”1/4
Low noise Vertical Multistage Pump, the motor is cooled by pumped liquid, whilst simultaneouslyreducing the noise levels as the liquid passes around the motor within a water jacket. The doublemechanical seal with interposed chamber containing lubrication fluid ensuring long life and reliability.Suitable for booster sets, water features and irrigation systems. This pump is also suitable for instal-lations where the pump is required to run under flood conditions. Supplied with 5 m cable lenght typeH07 RN-F.
MULTIGO
DIMENSIONAL TABLE
Pump type H
Single-phaseMULTIGO M 40/08MULTIGO M 40/10MULTIGO M 40/12MULTIGO M 40/15MULTIGO M 80/12MULTIGO M 80/15
-
Three-phaseMULTIGO 40/08MULTIGO 40/10MULTIGO 40/12MULTIGO 40/15MULTIGO 80/12MULTIGO 80/15MULTIGO 80/20
547573624650573598624
1~
13,414,414,816,414,816,1
-
3~
13,014,014,416,014,415,717,2
Weightmm kg
37
MULTIGO
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Absorbed Current (A) Q=Capacity
Single-phase230V 50Hz
MULTIGO M 40/08MULTIGO M 40/10MULTIGO M 40/12MULTIGO M 40/15MULTIGO M 80/12MULTIGO M 80/15
-
µF VcThree-phase400V 50Hz
MULTIGO 40/08MULTIGO 40/10MULTIGO 40/12MULTIGO 40/15MULTIGO 80/12MULTIGO 80/15MULTIGO 80/20
0,60,750,91,10,91,11,5
4,35,76,87,36,47,5-
1,92,22,43,02,33,13,5
43,354,164,975,7
---
40,250,260,270,345,657
68,4
36,345,454,563,6445566
26,132,639,245,738,848,558,2
13,416,820,223,5324048
----
23,228
34,8
----
15,219
22,8
162020
31,520
31,5-
450450450450450450
-
400V1~
230V3~ l/min
m3/h201,2
301,8
402,4
603,6
804,8
1006
1207,2
H=Total head
PERFORMANCE TABLE
VERTICAL CENTRIFUGAL MULTISTAGE PUMPS
38
VERTICAL MULTISTAGE PUMPS in AISI 304
SPECIFICATIONS• Maximum working pressure up to 25 bar • Liquid temperature: from –15°C up to +120°C
MATERIALS• Pump body, external casing, casing cover, impellers,
diffusers, bearing sleeve, coupling guard and bolts incontact with liquid AISI 304 (“G” version for EVM 30-60:Bottom casing in cast iron).
• Tie-rods and bolts not in contact with liquid in zinc coated steel
• Shaft in AISI 316• Bearing in contact with liquid in tungsten-carbide• Bracket and base in cast iron• Mechnical seal in SiC/Carbone/FPM
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection IP55 • 1~230V ± 10% 50Hz up to 2,2 kW, 3~230/400V ±10%
50Hz up to 4 kW included, 3~400/690V ±10% above 5,5kW
Vertical multistage centrifugal pumps completely made of stainless steel AISI 304. Reliable, quiet andeasy to maintain. Suitable for municipal, Industrial and agricultural applications e.g. Fire fighting,water boosting (WRAS approved) water treatment plants, irrigation, hot and cold water movement forheating systems, cooling and airconditioners, especially suitable for boiler feed due to the robust con-struction of the pumps. IEC standard motors are used on all models.
EVM
13,2-----------------
l/minm3/h
50030
20012
30018
40024
60036
80048
100060
120072
40
VERTICAL MULTISTAGE PUMPS in AISI 304
EVM
kW Pmax[Mpa]
MotorSize
Capacitor Absorbed Current (A)
0,370,370,550,550,750,751,11,11,51,52,22,23,00,370,550,751,11,11,51,52,22,22,23,03,04,04,00,751,11,52,22,23,04,04,05,55,55,57,57,57,52,23,04,05,55,57,57,51111151515
1,61,61,61,61,61,61,61,61,61,62,52,52,51,61,61,61,61,61,61,61,61,61,61,61,62,52,51,61,61,61,61,61,61,61,61,61,62,52,52,52,51,61,61,61,61,61,61,62,52,52,52,52,5
71717171808080809090909010071718080809090909090100100112112808090909010011211213213213213213213290100112132132132132160160160160160
µF
101012122020303040406060-
10122030304040606060----
2030406060---------
60-----------
Vc
400400400400400400400400400400400400
-400400400400400400400400400400
----
400400400400400
---------
400-----------
1~
3,03,03,83,85,35,36,56,59,59,51313-
3,03,85,36,56,59,59,5131313----
5,36,59,51313---------
13-----------
3~230V
1,651,652,342,342,82,84,04,05,75,77,67,610,91,62,32,84,04,05,75,77,67,67,610,910,914,214,22,84,05,77,67,67,610,914,214,2
-----
7,610,914,2
---------
3~400V
0,950,951,351,351,61,62,32,33,33,34,44,46,30,951,351,62,32,33,33,34,44,44,46,36,38,28,21,62,33,34,44,46,38,28,211,511,511,515,315,315,34,46,38,211,511,515,315,320,420,427,627,627,6
3~690V
-----------------------------------
6,66,66,68,88,88,8---
6,66,68,88,811,811,815,915,915,9
Pump typeEVM
Q=Capacity
Three-phase
EVM2 2N/0,37EVM2 3N/0,37EVM2 4N/0,55EVM2 5N/0,55EVM2 6N/0,75EVM2 7N/0,75EVM2 9N/1,1EVM2 11N/1,1EVM2 13N/1,5EVM2 15N/1,5EVM2 18F/2,2EVM2 22F/2,2EVM2 26F/3,0EVM4 2N/0,37EVM4 3N/0,55EVM4 4N/0,75EVM4 5N/1,1EVM4 6N/1,1EVM4 7N/1,5EVM4 8N/1,5EVM4 10N/2,2EVM4 11N/2,2EVM4 12N/2,2EVM4 14N/3,0EVM4 16N/3,0EVM4 19F/4,0EVM4 22F/4,0EVM8 2N/0,75EVM8 3N/1,1EVM8 4N/1,5EVM8 5N/2,2EVM8 6N/2,2EVM8 8N/3,0EVM8 10N/4,0EVM8 11N/4,0EVM8 12N/5,5EVM8 14N/5,5EVM8 15F/5,5EVM8 16F/7,5EVM8 18F/7,5EVM8 20F/7,5EVM16 2F/2,2 EVM16 3F/3,0EVM16 4F/4,0 EVM16 5F/5,5 EVM16 6F/5,5 EVM16 7F/7,5EVM16 8F/7,5 EVM16 10F/11EVM16 12F/11EVM16 14F/15EVM16 15F/15 EVM16 16F/15
Single-phase
EVM2 2N/0,37 MEVM2 3N/0,37 MEVM2 4N/0,55 MEVM2 5N/0,55 MEVM2 6N/0,75 MEVM2 7N/0,75 MEVM2 9N/1,1 MEVM2 11N/1,1 MEVM2 13N/1,5 MEVM2 15N/1,5 MEVM2 18F/2,2 MEVM2 22F/2,2 M
-EVM4 2N/0,37 MEVM4 3N/0,55 MEVM4 4N/0,75 MEVM4 5N/1,1 MEVM4 6N/1,1 MEVM4 7N/1,5 MEVM4 8N/1,5 MEVM4 10N/2,2 MEVM4 11N/2,2 MEVM4 12N/2,2 M
----
EVM8 2N/0,75 MEVM8 3N/1,1 MEVM8 4N/1,5 MEVM8 5N/2,2 MEVM8 6N/2,2 M
---------
EVM16 2F/2,2 M-----------
12,819,226
32,538
44,358,168,784
95,5120
141,2165,117,225,734,944,153,261,871,688,298106127142168195
--------------------------
7,511,115,218,822,526,133,839,548,855,974
81,710515,823,432
40,648,256,565,881
90,297,4116130
154,2180
--------------------------
-------------
13,921
28,436,343,550,958,272,581,887,2105,7118
138,2163,521,132
42,853,664,485,7107117129150162171193219
------------
-------------
13,420,227,4354249
57,170,678,684
102,2116,7134,6158,120,831,842,253
64,285106
116,2127,1148,3160,7170
191,2217,2
------------
-------------
6,910,515,519,824
27,733
39,645
47,560,567,675,288,919,229,540
49,159
80,298,4108
118,4137,5148,7157,8176,2202,3
------------
---------------------------
17,126,836,144,353,672,587,997,8107,5124,8134,2140,9158
183,229
43,658,273,888,3103119148181207226236
---------------------------
10,416,722,628,333,845,856,561,467,879,186,690,410212126,238,152
67,179,892,5108
132,2164,5186,5207
215,2
-----------------------------------------
21,130,742,354,965
76,588,1108,9138
152,3171,8181
-----------------------------------------
10,615,422,329,535,841,349,259
77,682,6100108
l/minm3/h
201,2
402,4
603,6
754,5
804,8
1207,2
1509,0
22513,5
30018
40024
H=Total head
Pump typeEVM
kW Absorbed Current (A) Q=Capacity
EVM30 2F/4EVM30 3F/5,5EVM30 4F/7,5EVM30 5F/11EVM30 6F/11EVM30 7F/15EVM30 8F/15EVM30 9F/18,5EVM30 10F/18,5EVM30 11F/22EVM30 12F/22EVM60 2F/5,5EVM60 3F/7,5EVM60 4F/11EVM60 5F/15EVM60 6F/15EVM60 7F/18,5EVM60 8F/22
45,57,511111515
18,518,522225,57,5111515
18,522
Maximumworkingpressure
Motorsize
[MPa]
1,61,61,61,61,61,62,52,52,52,52,51,61,61,61,61,61,61,6
112132132160160160160160160180180132132160160160160180
7,610,613,920,120,126,826,832,332,339,739,710,613,920,126,826,832,339,7
-6,18,011,611,615,415,418,618,622,922,96,18,011,615,415,418,622,9
3958,578
95,3112,6134,3156
175,5195
214,5234
-------
36,554,873
89,2105,4125144163182
201,5221
-------
3349,566
80,394,61131301481661832003043
59,571,583,5103,5120
284256
67,979,896,6114
128,514315717129
41,457,269
80,699,8115,7
2131,542
52,362,575,38810011212313427,839,354,66677
95,6110,5
24,734,748,858,468,385
98,2
20,228,540,348,857
71,283
14,5202935415262
230V 400V 690VThree-phase
H=Total head
16,825,233,942
50,558,875,791,1109126156186220
----------------------------------------
Pump Type Size Max. working MaterialEVM [mm] pressure A B Rubber
[MPa] Stationary seal ring Rotary seal ring
30-60 25 1.6 Silicon carbide Carbon graphite FPM2.5
30-60* 25 1.6 Silicon carbide Carbon graphite EPDM2.5
* WRAS approved version
41
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
MECHANICAL SEAL EVM 30-60
Pump Type Size Max. working MaterialEVM [mm] pressure A B Rubber
[MPa] Stationary seal ring Rotary seal ring
2-4 12.7 1.6
2.5
8 16 1.6 Silicon carbide Carbon graphite FPM2.5
16 20 1.6
2.5
2-4* 12.7 1.6 Ceramic Carbon graphite EPDM
2.5 Silicon Carbide Carbon graphite EPDM
8* 16 1.6 Ceramic Carbon graphite EPDM
2.5 Silicon Carbide Carbon graphite EPDM
16* 20 1.6 Ceramic Carbon graphite EPDM
2.5 Silicon Carbide Carbon graphite EPDM
MECHANICAL SEAL EVM 2-16
* WRAS approved version
42
Liner ringis a self-aligning, floating design constructed ofEPD bonded to stainless steel to preventswelling at high temperatures
Standard IEC motors
Positive SealingO-rings betweenintermediatecasings providepositive sealing
Tungsten carbide lower pump bearingsand sleeves are standard construction for allservices providing maximum operating life
Air ventin casing cover allows proper venting preventing airentrapment and dry run
Vent positioneliminates all air
Lowermechanicalseal position
Mechanical sealSilicon/Carbon/FPMmechanical shaftseal
Metal core
The EBARA EVM vertical multistage pumps offer technically advanced designs to meet marketdemands including hot water applications.Unique bulge forming process produces rugged construction with increased wall thickness and assurescomponent integrity.
Impeller
Intermediate Case
T = thickness back shroud
t = thickness front shroud
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
43
All wetted parts are constructed of high quality stainless steel.EBARA's robust construction extends to critical internal components such as the impellers. Theback shrouds are as much as three times thicker than the front shrouds while front shrouds are20% to 60% thicker than comparable designs.
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
Dimensions & flangesinstallation is to marketaccepted dimensions foreasy upgrade of existinginstallations
Square-edge spline shaftprovides positive location and drive of impellerseliminating wear from sliding between faces
Floating Outer Casing
clearance
Thrust Bearingbuilt-in on 3 HP and larger pumpsto handle axial thrust loads
MotorKey
Coupling
Snap Ring
Key
MotorBracket
Direct drivepump and motor shafts are keyed for positive,reliable power transmission with no adjustmentsnecessary
Tie bolts
Floating outer casingallows for thermal expansion inhot water applications and isflexible preventing deformationdue to pressure fluctuations
Anti-erosion measuresa dish-shaped insert is fitted to the intermediatecasing designed to promote smooth flow andprevent high velocity areas that accelerate erosion
44
VERTICAL MULTISTAGE PUMPS in AISI 304
PERFORMANCE CHART (according to ISO 9906 grade 2)
EVM
45
VERTICAL MULTISTAGE PUMPS in AISI 304
PERFORMANCE CURVES (according to ISO 9906 Annex A)
EVM
46
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
PERFORMANCE CURVES EVM4 series (according to ISO 9906 Annex A)
47
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
PERFORMANCE CURVES EVM8 series (according to ISO 9906 Annex A)
48
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
PERFORMANCE CURVES EVM16 series (according to ISO 9906 Annex A)
49
PERFORMANCE CURVES EVM 30 series (according to ISO 9906 Annex A)
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
50
PERFORMANCE CURVES EVM 60 series (according to ISO 9906 Annex A)
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
51
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
EVM 2-16
EVM 30-60
HOLES
HOLES
52
EVMVERTICAL MULTISTAGE PUMPS in AISI 304
Pump type Motor type
Size H PL ML D G I MW SA SG SE SF ST SD BL BW BM BY1 BF BHPump( kgf)
Motor( kgf )
EVM30 2F/4 112 502 301 250 221 146 60,5 25 EVM30 3F/5,5 132 571 300 75,5 37
EVM30 4F/7,5 132 619 300 79 42
EVM30 5F/11 160 697 93 73
EVM30 6F/11 160 745 96 73
EVM30 7F/15 160 793
320
320
320
320
320
320320
320
320
320
320
100 84
EVM30 8F/15 160 841
350
350350
350350
350350
350
208,5208,5
208,5
208,5
208,5
208,5103 84
EVM30 9F/18,5 160 889 106,5 94
EVM30 10F/18,5 160 937 110 94
EVM30 11F/22 180 985 223,5223,5
115,5 119
EVM30 12F/22 180 1033 119 119
EVM60 2F/5,5 132 623,5 84,5 37
EVM60 3F/7,5 132 695,5 88,5 42
EVM60 4F/11 160 797,5 104 73
EVM60 5F/15 160 869,5
365365365365
365365
365
108 84
EVM60 6F/15 160 941,5
350
350
350350
350
112 84
EVM60 7F/18,5 160 1013,5 116 94
EVM60 8F/22 180 1085,5 570 360 223,5 123 119
Dimensions (mm) Weights
105
105
105
105
105
105
105105
105
105
105140
140
140
140
140140
140
492,5
492,5492,5
492,5492,5492,5
492,5492,5492,5492,5
570570
367367
367 300367 300
360360
261 163,5261 163,5
261 163,5261 163,5
208,5310208,5310
208,5310
208,5310
310310
310310310
310
150100 180 220 24 18 260 306 190 266 14 35
150100 180 220 24 18 260 306 190 266 14 35
150100 180 220 24 18 260 306 190 266 14 35
150100 180 220 24 18 260 306 190 266 14 35
150100 180 220 24 18 260 306 190 266 14 35150100 180 220 24 18 260 306 190 266 14 35150100 180 220 24 18 260 306 190 266 14 35
65 122 145 185 22 18 210 280 170 240 14 35
65 122 145 185 22 18 210 280 170 240 14 35
65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35
65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35
65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35
DIMENSIONAL TABLE EVM 30-60
Pump typeEVM
Dimensions (mm)
EVM2 2N/0,37EVM2 3N/0,37EVM2 4N/0,55EVM2 5N/0,55EVM2 6N/0,75EVM2 7N/0,75EVM2 9N/1,1 EVM2 11N/1,1EVM2 13N/1,5EVM2 15N/1,5EVM2 18F/2,2 EVM2 22F/2,2 EVM2 26F/3,0EVM4 2N/0,37 EVM4 3N/0,55EVM4 4N/0,75EVM4 5N/1,1EVM4 6N/1,1EVM4 7N/1,5EVM4 8N/1,5EVM4 10N/2,2EVM4 11N/2,2EVM4 12N/2,2EVM4 14N/3,0EVM4 16N/3,0EVM4 19F/4,0EVM4 22F/4,0EVM8 2N/0,75EVM8 3N/1,1EVM8 4N/1,5EVM8 5N/2,2EVM8 6N/2,2EVM8 8N/3,0EVM8 10N/4,0EVM8 11N/4,0EVM8 12N/5,5EVM8 14N/5,5EVM8 15F/5,5EVM8 16F/7,5EVM8 18F/7,5EVM8 20F/7,5EVM16 2F/2,2 EVM16 3F/3,0EVM16 4F/4,0 EVM16 5F/5,5 EVM16 6F/5,5 EVM16 7F/7,5EVM16 8F/7,5 EVM16 10F/11EVM16 12F/11EVM16 14F/15EVM16 15F/15 EVM16 16F/15
717171718080808090909090
10071718080809090909090
1001001121128080909090
10011211213213213213213213290
100112132132132132160160160160160
5050505050505050505075757550505050505050505050505075758080808080808080808080808080909090909090909090909090
1~185185185185214214214214245245245245
-185185214214214245245245245245
----
214214245245245
---------
245-----------
3~208208208208234234234234250250278278303208208234234234250250278278278303303301301234234250278278303301301367367367367367367278303301367367367367
492,5492,5492,5492,5492,5
226247268289320341383425477519607691785240268306334362400428484512550606662771855327357397427457527617647667727757787847907367417457517557597637747827907947987
160160160160160160160160160160250250250160160160160160160160160160160160160250250200200200200200200200200200200280280280280300300300300300300300300300300300300
1~140140140140158158158158178178178178
-140140158158158178178178178178
----
158158178178178
---------
178-----------
3~141141141141159159159159180180180180200141141159159159180180180180180200200221221159159180180180200221221261261261261261261180200221261261261261310310310310310
1~106106106106121121121121131131131131
-106106121121121131131131131131
----
121121131131131
---------
131-----------
3~102102102102110110110110126126126126135102102110110110126126126126126135135146146110110126126126135146146
163,5163,5163,5163,5163,5163,5126135146
163,5163,5163,5163,5208,5208,5208,5208,5208,5
100100100100100100100100100100100100100100100100100100100100100100100100100100100130130130130130130130130130130130130130130130130130130130130130130130130130130
149149149149149149149149149149149149149149149149149149149149149149149149149149149190190190190190190190190190190190190190190190190190190190190190190190190190190
180180180180180180180180180180180180180180180180180180180180180180180180180180180215215215215215215215215215215215215215215215215215215215215215215215215215215
210210210210210210210210210210210210210210210210210210210210210210210210210210210250250250250250250250250250250250250250250250250250250250250250250250250250250
MEC H PL ML G ØI MW BM BL BY1 BW
G1”G1”G1”G1”G1”G1”G1”G1”G1”G1”Ø25Ø25Ø25
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
G1” 1/4
Ø32Ø32
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
G1” 1/2
Ø40Ø40Ø40Ø40Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50
SA
----------
Ø120Ø120Ø120
------------
Ø140Ø140
----------
Ø150Ø150Ø150Ø150Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165
----------
161616------------
1616----------
18181818181818181818181818181818
22222222224442222222222224422222222224444444444444444
M10M10M10M10M10M10M10M10M10M10Ø14Ø14Ø14M10M10M10M10M10M10M10M10M10M10M10M10Ø14Ø14M12M12M12M12M12M12M12M12M12M12Ø19Ø19Ø19Ø19Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18
PG11PG11PG11PG11PG16PG16PG16PG16PG16PG16PG16PG16PG16PG11PG11PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG21PG21PG21PG21PG21PG21PG16PG16PG16PG21PG21PG21PG21PG29PG29PG29PG29PG29
solo pompe10,711,412,214,713,614,415,917,320,722,22730
32,911,111,920,817,316,217,218,822
24,525,629,530,529,231,518,619,526,925,227,224,126
26,959,662,86559
60,5613436
38,548,249
51,5536462
70,572,274
1~18,218,920,220,924,625,428,529,939,240,74750-
18,619,923,625,926,735,236
37,538,239,5
----
29,630,538,941,342,3
---------
48-----------
3~17,117,819,520,222,623,426,427,835,737,24548
53,917,519,220,823
23,828,729,535
35,737,542,944,451,253,526,829,232,437,338,344,148
48,960,362,266,874,276,177,944
49,162
63,895,597,598,8138
139,2140,2141,4142,2
75757575757575757575858585757575757575757575757575
100100100100100100100100100100100100110110110110125125125125125125125125125125125125
SE
----------
Ø70Ø70Ø70
------------
Ø78Ø78
----------
Ø88Ø88Ø88Ø88
Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102
SG SF ST SN SD VWeight
kg
DIMENSIONAL TABLE EVM 2-16
1~
13,615,7
--
53
DWOCENTRIFUGAL PUMPS - OPEN IMPELLER in AISI 304
SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature: 90°C • Passage of solids: maximum diameter of 19 mm
MATERIALS• Pump body, casing cover, impeller and shaft in AISI 304 • Bracket and motor casing in cast iron • Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version• DNA 2”1/2 for DWO 300-400
DNA 2” for the other models • DNM 2”
Open impeller centrifugal pumps with the hydraulic element manufactured from stainless steel AISI304, suitable for suspended solids handling food process e.g. washing vegetables, meats, and fish.Industrial washing machines that may contain solids e.g. bottles, jars, glasses & crates. Processapplications such as paint plants & general dirty liquid handling. An IP68 submersible is also avail-able.
DIMENSIONAL TABLE
Pump type Dimensions (mm)
Single-phaseDWO 150 MDWO 200 M
--
Three-phaseDWO 150DWO 200DWO 300DWO 400
364364390415
198,5198,5215,5240,5
62,562,58080
3~
PG11PG11
PG13,5PG13,5
74747878
1~
PG13,5PG13,5
--
G 2G 2
G 21/2
G 21/2
3~
12,614,416,920,0
Weight
B C R Ø P V T Ø DNA kg
54
DWO
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
DWO 150 MDWO 200 M
--
µF VcThree-phase230/400V 50Hz
DWO 150DWO 200DWO 300DWO 400
1,11,52,23,0
6,89,0--
4,46,18,311,0
2,53,54,86,4
9,512,715
17,5
8,912,314,516,9
7,911,513,816,3
6,910,512,915,6
5,18,611,714,3
-5,89,712,4
--
7,59,8
---
7,6
31,540--
450450
--
230V 400VSingle-phase
Three-phase l/minm3/h
1006
20012
30018
40024
55033
75042
95057
110066
H=Total head
PERFORMANCE TABLE
CENTRIFUGAL PUMPS - OPEN IMPELLER in AISI 304
55
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - SINGLE IMPELLER in cast iron
SPECIFICATIONS• Maximum working pressure: 6 bar,
8 bar for CMA 1.50-2.00-3.00 – CMB 4.40-5.50 • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for CMA 0.50-0.75-0.80-1.0090°C for other models
MATERIALS• Pump body in cast iron • Mechanical seal in carbon/ceramic/NBR• Impeller: - in tecnopolymer for CMA 0.50-0.75-0.80-1.00
- in brass for CMA 1.50-2.00-3.00CMB 2.00-3.00-4.00-5.50CMR 0.75-1.00
- in cast iron for the other models.• Shaft: - in AISI 303 for CMA 0.75-0.80-1.00
1.50-2.00-3.00CMB 1.50-2.00-3.00CMD 1.50-2.00-3.00
- in AISI 304 for CMB 4.00-5.50CMD 4.00
- in AISI 416 for CMA 0.50• Bracket: - in alluminium for CMA 0.50-0.75-0.80-1.00
CMB 0.75-1.00CMC 0.75-1.00CMR 0.75-1.00
- in cast iron for the other models
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version
Single impeller centrifugal pumps manufactured cast iron, suitable for pressure boosting of water forirrigation, and non-aggressive liquids for civil and industrial uses.CMR series is fitted with an open impeller for suspended solids handling.
56
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - SINGLE IMPELLER in cast iron
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseCMA 0.50 MCMA 0.75 MCMA 0.80 MCMA 1.00 MCMA 1.50 MCMA 2.00 M
-
CMB 0.75 MCMB 1.00 MCMB 1.50 MCMB 2.00 M
---
CMC 0.75 MCMC 1.00 M
CMD 1.50 MCMD 2.00 M
--
CMR 0.75 MCMR 1.00 M
Three-phaseCMA 0.50 TCMA 0.75 TCMA 0.80 TCMA 1.00 TCMA 1.50 TCMA 2.00 TCMA 3.00 T
CMB 0.75 TCMB 1.00 TCMB 1.50 TCMB 2.00 TCMB 3.00 TCMB 4.00 TCMB 5.50 T
CMC 0.75 TCMC 1.00 T
CMD 1.50 TCMD 2.00 TCMD 3.00 TCMD 4.00 T
CMR 0.75 TCMR 1.00 T
160185185185200225225
188188188200200247247
186186
213213213213
180180
261,8300,3300,3300,3347,3360,3360,3
315,3315,3349,3373,3373,3428,8428,8
313,3313,3
384,3397,3397,3449,3
310,3310,3
3036,836,836,841,841,841,8
36,836,836,836,836,84848
36,836,8
36,836,836,836,8
36,836,8
44454545
45,545,545,5
49,549,549,557,557,56060
4343
68686868
4545
158,8171,8171,8171,8208,3208,3208,3
182,3182,3206,3209,3209,3222,3222,3
186,8186,8
222,8222,8222,8234,8
181,8181,8
8999999
999991212
99
12121212
99
202232232232252285285
251,5251,5251,5271,5271,5323,5323,5
247247
271,5271,5271,5271,5
229229
82979797100115115
101,5101,5101,5111,5111,5133,5133,5
9797
111,5111,5111,5111,5
9797
120135135135152170170
150150150160160190190
150150
160160160160
132132
3~
172,5197,5197,5197,5214229229
127127
215,5225,5225,5264,5264,5
197,5197,5
225,5225,5225,5354
197,5197,5
1~
173198198198232247
-
127,5127,5233,5243,5
---
198198
243,5243,5
--
198198
40454545505050
45454545456060
4545
45454545
4545
40404040404040
40404040405050
4040
40404050
4040
110140140140155180180
140140140160160190190
140140
160160160160
140140
A B C D E F H H1 H2 H3 H4 M M1 N
150180180180194220220
180180180200200240240
180180
200200200200
180180
N1 R T V W S DNA DNM
44454545
45,545,545,5
65,565,565,576,576,577,577,5
63,563,5
100,5100,5100,5100,5
60,560,5
1~
PG11PG11PG11PG11
PG13,5PG13,5
-
PG11PG11
PG13,5PG13,5
---
PG11PG11
PG13,5PG13,5
--
PG11PG11
3~
PG11PG11PG11PG11PG11PG11PG11
PG11PG11PG11PG11PG11G 1/2G 1/2
PG11PG11
PG11PG11PG11G1/2
PG11PG11
3036,836,836,841,841,841,8
52,852,852,855,855,865,565,5
57,357,3
69,369,369,369,3
52,352,3
9,59,59,59,59,59,59,5
9,59,59,59,59,51212
9,59,5
9,59,59,59,5
9,59,5
G 1G 1G 1G 1
G 11/4
G 11/4
G 11/4
G 2G 2G 2G 2G 2G 2G 2
G 2G 2
G 21/2
G 21/2
G 21/2
G 21/2
G 11/2
G 11/2
G 1G 1G 1G 1G 1G 1G 1
G 11/4
G 11/4
G 11/4
G 11/4
G 11/4
G 11/4
G 11/4
G 2G 2
G 21/2
G 21/2
G 21/2
G 21/2
G 11/2
G 11/2
7,311,710,712,019,421,322,0
12,513,820,521,521,539,041,0
12,313,0
22,024,024,031,5
11,012,2
Weightkg
57
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - SINGLE IMPELLER in cast iron
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CMA 0.50 MCMA 0.75 MCMA 0.80 MCMA 1.00 MCMA 1.50 MCMA 2.00 M
-
µF VcThree-phase230/400V 50Hz
CMA 0.50 TCMA 0.75 TCMA 0.80 TCMA 1.00 TCMA 1.50 TCMA 2.00 TCMA 3.00 T
0,370,550,60,751,11,52,2
3,24,74,86,28
10,3-
2,43,23,34,35,47,59,5
1,41,81,92,53,14,35,5
2031,528
34,540,54753
17,828,226,132,839,645,851,8
1524
23,830,638,244,250,2
12,118,920,928,236,542,448,3
11,217,520,127,636
41,947,8
10,5-
19,326,935,641,447,3
--
18,526,234,940,946,7
---
25,534,340,346,2
----
3339,245
-----
3843,7
------
41
101616203540-
450450450450450450
-
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
402,4
603,6
804,8
855,1
905,4
955,7
1006
1106,6
1207,2
1408,4
H=Total head
PERFORMANCE TABLE
58
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - SINGLE IMPELLER in cast iron
Pump type kW Capacitor Absorbed Current (A) Q=Capacity
Single-phase230V 50Hz
CMB 0.75 MCMB 1.00 MCMB 1.50 MCMB 2.00 M
---
µF VcThree-phase230/400V 50Hz
CMB 0.75 TCMB 1.00 TCMB 1.50 TCMB 2.00 TCMB 3.00 TCMB 4.00 TCMB 5.50 T
0,550,751,11,52,23,04,0
4,56,08,510,8
---
3,04,55,57,58,312,015,9
1,72,63,24,34,86,99,2
14,218,422,428,734,54554
13,317,421,127,733,743,452,3
1216,119,826,332,141,550,4
10,415,218
24,530,338,448,1
914
17,122,828,836,245,7
--
162127
33,543
1420
31,540---
450450450450
---
230V 400VSingle-phase
Three-phase l/minm3/h
1006
1408,4
18011
22013
25015
28017
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
59
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Corrente as. (A) Q=CapacitySingle-phase230V 50Hz
CMC 0.75 MCMC 1.00 MCMR 0.75 MCMR 1.00 M
µF VcThree-phase230/400V 50Hz
CMC 0.75 TCMC 1.00 TCMR 0.75 TCMR 1.00 T
0,550,750,550,75
4,25,33,84,85
2,83,52,83,5
1,62,01,62,0
11,413,413,617,3
11,415,4
10,612,6
8,111,5
8,8116,39,6
-8,7
5,98,6
46,8
-5
14201420
450450450450
230V 400VSingle-phase
Three-phase l/minm3/h
503
1006
1509
20012
25015
27516,5
35021
40024
45027
H=Total head
PERFORMANCE TABLE
60
CMA-B-C-D-CMRCENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CMD 1.50 MCMD 2.00 M
--
µF VcThree-phase230/400V 50Hz
CMD 1.50 TCMD 2.00 TCMD 3.00 TCMD 4.00 T
1,11,52,23,0
8,910,8
--
5,97,59,012,3
3,44,35,27,1
10,412,415,417,8
9,911,914,917,3
8,410,513,516,1
68,311,414,2
4,56,810
13,1
-6
9,312,5
--
8,511,8
---
10,4
31,540--
450450
--
230V 400VSingle-phase
Three-phase l/minm3/h
30018
40024
60036
80048
90054
95057
100060
110066
H=Total head
PERFORMANCE TABLE
61
CDACENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron
SPECIFICATIONS• Maximum working pressure: 6 bar for CDA 0.75-1.00
10 bar for other models • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for CDA 0.75-1.0090°C for other models
MATERIALS• Pump body in cast iron • Mechanical seal in carbon/ceramic/NBR• Impeller: - in tecnopolymer for CDA 0.75-1.00
- in brass for the other models• Shaft: - in AISI 303 for CDA 1.50-2.00-3.00
- in AISI 304 for CDA 4.00-5.50- in AISI 416 for the other models
• Bracket: - in alluminium for CDA 0.75-1.00- in cast iron for the other models
• Casing cover: - in AISI 304 for CDA 0.75-1.00- in cast iron for the other models
TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version
Twin impeller centrifugal pumps with hydraulic parts manufactured from cast iron, suitable for irriga-tion and non-aggressive liquids for civil and industrial uses.
DIMENSIONAL TABLEPump type Dimensions (mm)
Single-phaseCDA 0.75 MCDA 1.00 MCDA 1.50 MCDA 2.00 M
---
Three-phaseCDA 0.75 TCDA 1.00 TCDA 1.50 TCDA 2.00 TCDA 3.00 TCDA 4.00 TCDA 5.50 T
183183209209194228228
336,3336,3394,8410,8410,8467,3467,3
8,38,38,38,38,31212
7373868686
95,595,5
179,8179,8218,3218,3218,3225,3225,3
99999
1212
227227265265265
308,5308,5
9797110110110
133,5133,5
130130155155155175175
1~
197,5197,5224224224
264,5264,5
3~
198198242242
---
42424848485757
40404040405050
140140155155155180180
A B C D E F H H1 H2 H3 H4 M M1 N
180180195195195230230
N1 R T V W S DNA DNM
57,557,565,565,565,571,571,5
1~
PG11PG11
PG13,5PG13,5
---
3~
PG11PG11PG11PG11PG11G 11/2
G 11/2
6,86,8
12,312,312,31212
9,59,59,59,59,51212
G 1G 1
G 11/4
G 11/4
G 11/4
G 11/2
G 11/2
G 1G 1G 1G 1G 1
G 11/4
G 11/4
13,515,025,027,027,042,546,3
Weightkg
62
CDA
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
CDA 0.75 MCDA 1.00 MCDA 1.50 MCDA 2.00 M
---
µF VcThree-phase230/400V 50Hz
CDA 0.75 TCDA 1.00 TCDA 1.50 TCDA 2.00 TCDA 3.00 TCDA 4.00 TCDA 5.50 T
0,550,751,11,52,23,04,0
5,06,18,610,8
---
3,44,05,67,28,813,016,5
2,02,33,34,15,17,59,5
3339,550,860,5
---
30,237
48,858,660,5
--
27,935,247,156,959,367
76,5
1727
38,449,854,164,873,9
-21
33,446,551,663,972,9
--
27,540,348,462,571,8
---
32,544,662
70,5
----
3258
66,8
-----
53,562
-----
4858,3
------
54
16203540---
450450450450
---
230V 400VSingle-phase
Three-phase l/minm3/h
201,2
402,4
503
804,8
905,4
1006
1106,6
1408,4
17010,2
19011,4
21012,6
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
CENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron
63
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
SPECIFICATIONS• Maximum working pressure: 10 bar • Liquid temperature: from –10°C to +110°C• 110° C for H version
MATERIALS• Pump body, impeller, casing cover and shaft in
AISI 304 (3 series), in AISI 316L (3L series) • Mechanical seal in carbon/ceramic/NBR for standard version (3 series), in SiC/SiC/FPM (3L series)
• Mechanical seal in carbon/ceramic/Viton for H version • Mechanical seal on SiC/SiC/FPM for HS version
TECHNICAL DATA• Asincronous 2 and 4 poles motor • Insulation class F• Protection degree IP55 • 1~230±10%• 3~230/400V ± 10% 50Hz up to 4kW included,
400/690V ±10% above • Thermal protection to be provided by the user
End suction centrifugal pumps in accordance with EN 733 (ex DIN 24255) made of stainless steelAISI 304 (3 series) and AISI 316L (3L series), applications include water boosting, heating systems,air-conditioning, washing systems and many other industrial applications.WRAS approved pumps are available upon request.
monobloc with extended motor shaft
monobloc with standard motor and flexible coupling
on basement with standard motor and flexible coupling
bareshaft pump
3M
3S
3P
3PF 3SF
3M3LM
3S3LS
3P3LP
3PF3LPF
3SF3LSF
Available in 4 different versions, 2 and 4 poles
64
Pump type3(L)M
kW HP Absorbed Current (A) Q=Capacity
32-125/1.1 (M)32-160/1.5 (M)32-160/2.2 (M)32-200/3.032-200/4.032-200/5.532-200/7.540-125/1.5 (M)40-125/2.2 (M)40-160/3.040-160/4.040-200/5.540-200/7.540-200/1150-125/2.2 (M)50-125/3.050-125/4.050-160/5.550-160/7.550-200/9.250-200/1150-200/1565-125/4.065-125/5.565-125/7.565-160/7.565-160/9.265-160/1165-160/1565-200/1565-200/18.565-200/22
------
10---------------
5.57.51010
12.51520202530
1,11,52,23,04,05,57.51,52,23,04,05,57,5112,23,04,05,57,59,211154
5.57.57.59.2111515
18.522
5,05,98,311,815,6
--
5,98,311,815,9
---
8,311,815,9
---------------
2,93,44,86,89,011,8
-3,44,86,89,211,115,120,04,86,89,211,515,517,422,031,3
----------
-----
6,8-----
6,48,711,6
---
6,69,010,012,718,0
----------
2128
35,542
53,56969-------------------------
18,424,532
37,549,5656519
25,529,538,545,55771------------------
14,119,22731
43,558,358,317,624
27,53744
55,570------------------
12172528
40,5-
55,517
23,52736435570------------------
------
4915,722
25,534,541
53,568,517,520,52631
38,5-------------
------
4414,5212433
39,552,567,51720
25,530,538-------------
-------
13,219,522,532385166
16,319,62530
37,5505670----------
-------
10,316,4202935
47,563
14,918,424
28,5364955692025
30,5-------
-------71317
25,5314459
13,417
22,52735
47,55468
19,424,529,530
34,538,545,551
58,565,5
--------------
11,715,421,525,533,545,55266
18,523,5292934384550
57,565
--------------8
11,817,92230
40,54862
16,521,5272732364348
55,563
---------------8141826344257
14,319,124,525,529,53441
45,553
60,5
230V 400V 690V
Three-phase l/minm3/h
1006
22,529,5374455
70,570,520
26,531404758721922
26,53340535972
22,5273232
36,540,54854
60,567
00
20012
30018
33320
----
38-
5316,523
26,535,542,554,569,5
------------------
36022
40024
45027
50030
60036
70042
80048
100060
120072
----------------------
10,715,521
21,526
30,537,54149
56,5
150090
----------------------7
11,716,817,521,526
33,5364452
1800108
-----------------------
10,415,41620
24,53234
42,550,5
1900114
------------------------
1414,518,623
30,532
40,548,5
2000120
--------------------------
1721,529303947
2100126
---------------------------
2027-
3745
2200132
H=Total head
PERFORMANCE TABLE
19,926,5344052
67,567,5
-------------------------
1509
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
PERFORMANCE CHART at 2900 min-1 (according to ISO 9906 Annex A)
(M) Single-phase
65
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES
PERFORMANCE CHART at 1450 min-1 (according to ISO 9906 Annex A)
PERFORMANCE TABLE
-------------------------
5,5--9
H= Total head5,67,28,710,512
17,3-----------------------
l/min 50m3/h 3
1006
1609,6
20012
25015
30018
35021
40024
50030
60036
65039
80048
95057
100060
105063
110066
120072
0,250,370,370,550,550,750,370,370,550,551,11,11,50,550,551,11,11,51,52,20,550,751,11,11,52,22,22,23
4,96,38
9,311
16,54,56,27,28,511
12,717,8
----------------
3,34,56,77
9,214,6
45,76,77,910,512,317,4
----------------
------
3,65,26,37,510,111,916,94,95,87,79
12,113
17,7---------
------3
4,65,76,99,611,216,24,75,67,58,811,812,717,5
---------
------
2,33,85
6,29
10,415,34,45,47,28,511,512,317,24,86
7,2------
------
1,53
4,35,48,39,414,24,25,26,98,211,111,916,84,65,87
8,19,211,312,413,915,8
-------------
3,84,96,57,810,611,516,44,45,75,88,09
11,112,213,715,6
-------------3
4,15,66,99,510,515,44,05,26,37,48,510,611,613,015,06
-------------2
3,24,55,88
9,1143,54,65,87,081011
12,414,5
--------------------
3,24,45,46,67,79,810,612
14,1
--------------------
2,33,54,55,76,78,89,310,812,9
--------------------
1,42,53,54,65,77,67,89,311,6
---------------------
2,23,24,25,37,27,38,811,1
----------------------
2,83,84,96,86,88,310,6
------------------------
4,56,4-
7,810,1
Pump Type kW HP Q= Capacity
3M
32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/90.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0
0,330,50,50,750,75
10,50,50,750,751,51,52
0,750,751,51,5223
0,751
1,51,523334
66
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 32 at 2900 min -1
(according to ISO 9906 Annex A)
67
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 40 at 2900 min -1
(according to ISO 9906 Annex A)
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES
68
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 50 at 2900 min -1
(according to ISO 9906 Annex A)
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
69
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 65 at 2900 min -1
(according to ISO 9906 Annex A)
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES
70
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
• Water supply for civil, agricultural and industrial systems• Pressure boosting• Fire-fighting systems• Heating and air-conditioning systems• Irrigation
• Cooling towers• Swimming pools• Washing systems• Emptying
3M-3S-3P 65 Range EnlargementPERFORMANCE CHART
2 Poles - 50 Hz
3M 65 3S 65 3P 65
APPLICATIONS
4 Poles - 50 Hz
71
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES
3M-3S-3P 65 EBARA Advanced Technology
The hydro-forming process toobtain the integrated volute ispatented. The volute offers higherefficiency than circular casingand the absence of a circularwelding guarantees a good cor-rosion resistance.
Casing has been tested to a pres-sure of 14 bar for a test sequence inexcess of 1 million cycles.
High efficiency impeller design -giving efficiencies up to 80%.Bronze or AISI 316 impeller.
Robust structural design -reducing the possible effects ofpipe strain and subsequent cas-ing deformation.
Hydraulically balanced impeller- reducing axial thrust andprolonging bearing life.
“Back Pull Out” design - allowing for the removal ofthe motor/impeller assembly, whilst leaving thecasing in situ.
Standard DIN mechanical seal -allowing for a range of sealmaterials to suit the pumpedmedium.
Casing
3 SERIES PERFORMANCE DATACapacity up to 132 m3/h
Total head up to 72 m
Please contact our Sales Network for complete technical and performance data of the complete range (including 4 poles and 60 Hz versions).
Volute forming Volute
72
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 32 at 1450 min -1
(according to ISO 9906 Annex A)
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES
73
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 40 at 1450 min -1
(according to ISO 9906 Annex A)
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
74
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 50 at 1450 min -1
(according to ISO 9906 Annex A)
75
SERIE 3-3LCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 65 at 1450 min -1
(according to ISO 9906 Annex A)
Dimensional table
X
Space fordissassembly
n1
Dimensions (mm) WeightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø H3
3(L)M DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 [3] [4] R W N1 M N2 A B C V X kg
32-125/1,1 (M) 50 32 96 4 – 125 165 16 76 100 140 14 252 112 140 122 139 80 70 140 114 190 213 408 231 PG 13,5 110 21,532-160/1,5 (M) 50 32 96 4 – 125 165 16 76 100 140 14 292 132 160 122 139 80 70 190 118 240 254 408 231 PG 13,5 110 24,232-160/2,2 (M) 50 32 96 4 – 125 165 16 76 100 140 14 292 132 160 122 139 80 70 190 118 240 254 408 231 PG 13,5 110 27,332-200/3,0 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 122 - 80 70 190 119 240 296 433 256 PG 13,5 110 34,932-200/4,0 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 134 - 80 70 190 119 240 296 458 256 PG 16 110 42,332-200/5,5 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 153 - 80 70 190 119 240 296 477 276 PG 16 110 53,232-200/7,5 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 153 - 80 70 190 119 240 296 520 276 PG 16 110 6540-125/1,5 (M) 65 40 116 4 – 145 185 16 81 110 150 14 252 112 140 122 139 80 70 160 114 210 213 408 231 PG 13,5 115 22,340-125/2,2 (M) 65 40 116 4 – 145 185 16 81 110 150 14 252 112 140 122 139 80 70 160 114 210 213 408 231 PG 13,5 115 24,740-160/3,0 65 40 116 4 – 145 185 16 81 110 150 14 292 132 160 122 - 80 70 190 118 240 254 433 255 PG 13,5 115 3040-160/4,0 65 40 116 4 – 145 185 16 81 110 150 14 292 132 160 134 - 80 70 190 118 240 254 458 255 PG 16 115 37,640-200/5,5 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 153 - 100 70 212 139 265 296 497 278 PG 16 115 54,540-200/7,5 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 153 - 100 70 212 139 265 296 520 224 PG 16 115 61,640-200/11 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 181 - 100 70 212 139 265 296 577 224 PG 21 115 73,850-125/2,2 (M) 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 122 139 100 70 190 138 240 254 428 231 PG 13,5 125 3050-125/3,0 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 122 - 100 70 190 138 240 254 453 255 PG 13,5 125 31,550-125/4,0 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 134 - 100 70 190 138 240 254 478 255 PG 16 125 37,650-160/5,5 65 50 116 4 – 145 185 16 96 125 165 16 340 160 180 153 - 100 70 212 139 265 296 497 278 PG 16 125 5450-160/7,5 65 50 116 4 – 145 185 16 96 125 165 16 340 160 180 153 - 100 70 212 139 265 296 520 224 PG 16 125 61,150-200/9,2 65 50 116 4 – 145 185 16 96 125 165 16 360 160 200 181 - 100 70 212 139 265 296 582 239 PG 21 125 67,550-200/11 65 50 116 4 – 145 185 16 96 125 165 16 360 160 200 181 - 100 70 212 139 265 296 582 239 PG 21 125 73,565-125/4 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 139 - 100 95 212 149,5 280 254 483 253 PG 16 145 4065-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 150 - 100 95 212 149,5 280 254 496 275 PG 16 145 5265-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 150 - 100 95 212 149,5 280 254 540 275 PG 16 145 58,565-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 150 - 100 95 212 149,5 280 296 540 275 PG 16 145 6265-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 177,5 - 100 95 212 149,5 280 296 593 356 PG 21 145 6765-160/11 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 177,5 - 100 95 212 149,5 280 296 593 356 PG 21 145 75,6
[1] Standard[2] On request
76
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
DIMENSIONAL TABLE
3M (3LM) up to 1,1 kW 2 POLES
77
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3M (3LM) 15 ÷ 22 kW 2 POLES
[1] Standard[2] On request
Dimensional table
X
Space fordissassembly
Dimensions (mm)Dimensions (mm) WWeighteightModelModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø Ø3(L)M3(L)M DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 A B L L1 L2 L3 L4 C D F S X kg
50-200/15 65 50 116 4 - 145 185 16 96 125 165 16 360 160 200 222 100 70 212 139 265 296 723,5 254 254 318 65 304 190,5 - - - 125 9665-160/15 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 222 100 95 212 149,5 280 296 733 254 254 318 65 304 199,5 - - - 145 9365-200/15 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 296 733 - 258 318 60 345 199,5 300 20 20 145 11465-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 296 733 - 258 318 60 345 199,5 300 20 20 145 12765-200/22 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 286 733 - 258 318 60 345 199,5 300 20 20 145 136
DIMENSIONAL TABLE
78
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3M4 (3LM4) 4 POLES
Dimensional table
Dimensions (mm)Dimensions (mm)
213254254294294294213213254254294294294254254296296296296296254254254296296296296296296
375395395395395408375375395395428428428415415428428428428478415427427427483483483483483
252292292340340340252252292292340340340292292340340360360360340340340360360360405405405
112132132160160160112112132132160160160132132160160160160160160160160160160160180180180
205222222223223232205205222222232232232222222232232232232256219230230230253253253253253
140160160180180180140140160160180180180160160180180200200200180180180200200200225225225
104117117117117122104104117117122122122117117122122122122134117
123.5123.5123.5123.5139139139139
114118118119119119114114118118115115115114114115115115115115
149,5149,5149,5149,5149,5149,5149,5149,5149,5
140190190190190190160160190190212212212190190212212212212212212212212212212212250250250
190240240240240240210210240240265265265240240265265265265265280280280280280280320320320
80808080808080808080100100100100100100100100100100100100100100100100100100100
1414141414141414141414141416161616161616161616161616161616
165165165165165165185185185185185185185185185185185185185185200200200200200200200200200
A B C H H1 H2 H3 M N1 N2 R S ØD1
1616161616161616161616161616161616161616181818181818181818
SAn1
44444444444444444444888888888
[1]
--------------------444444444
[2]
125125125125125125145145145145145145145145145145145145145145160160160160160160160160160
ØK1
7070707070707070707070707070707070707070959595959595959595
WØP1 ØD2 ØK2 ØP2ØDNA ØDNM
969696969696116116116116116116116116116116116116116116134134134134134134134134134
140140140140140140150150150150150150150165165165165165165165185185185185185185185185185
100100100100100100110110110110110110110125125125125125125125145145145145145145145145145
7676767676768181818181818196969696969696115115115115115115115115115
5050505050506565656565656565656565656565808080808080808080
3232323232324040404040404050505050505050656565656565656565
X
110110110110110110115115115115115115115125125 125 125 125 125 125145145145145145145145145145
15,020,020,025,025,029,315,015,020,020,030,030,032,220,020,030,030,030,030,031,822.927.828.130,832.637.838.538.743.3
WWeighteightkg
X Space fordissassembly
n1 ÿ 18SA
ModelModel3(L)M4
32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0
[1] Standard[2] On request
DIMENSIONAL TABLE
X
Space fordissassembly
Dimensional table
Dimensions (mm)Dimensions (mm) WWeighteightModelModel Ø Ø Ø Ø Ø Ø Ø Ø H3
3(L)S3(L)S DNA DNM P1 K1 D1 P2 K2 D2 H H1 H2 [1] [2] N1 M N2 A B C X kg
32-125/1,1M 50 32 96 125 165 76 100 140 252 112 140 129 150 140 114 190 213 430 118 110 23,132-160/1,5M 50 32 96 125 165 76 100 140 292 132 160 138 160 190 118 240 254 477 130 110 28,532-160/2,2M 50 32 96 125 165 76 100 140 292 132 160 138 160 190 118 240 254 477 130 110 32,440-125/1,5M 65 40 116 145 185 81 110 150 252 112 140 138 160 160 114 210 213 477 130 115 26,540-125/2,2M 65 40 116 145 185 81 110 150 252 112 140 138 160 160 114 210 213 477 130 115 29,650-125/2,2M 65 50 116 145 185 95 125 165 292 132 160 138 160 190 138 240 254 497 130 125 32,9
X
Space fordissassembly
Dimensional table
[1] Only for three-phase[2] Only for mono-phase
[1] Standard[2] On request
Dimensions (mm)Dimensions (mm) WeightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø
3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 A B L1 L2 L3 P X kg
32-200/3,0 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 145 80 70 190 119 240 294 528 160 202 42 63 110 43,432-200/4,0 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 161 80 70 190 119 240 294 550 190 228 38 70 110 45,965-125/4,0 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 161 100 95 212 149,5 280 254 615 190 228 38 70 145 47
79
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3S (3LS) up to 2,2 kW 2 POLES
3S (3LS) 3 ÷ 4 kW 2 POLES
DIMENSIONAL TABLE
DIMENSIONAL TABLE
X
Space fordissassembly
Dimensional tableDimensional table
[1] Standard[2] On request
Dimensions (mm)Dimensions (mm) WWeighteightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø
3(L)S3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W B C F X kg
40-200/11 65 40 115 4 - 145 185 16 80 110 150 14 382 160 180 250 100 110 801 198 836 115 10750-200/11 65 50 115 4 - 145 185 16 95 125 165 16 402 160 200 250 100 110 801 198 836 125 10750-200/15 65 50 115 4 - 145 185 16 95 125 165 16 402 160 200 250 100 110 801 198 836 125 13165-160/11 80 65 134 8 4 160 200 18 115 145 185 16 402 160 200 246 100 122,5 801 198 849 145 7665-160/15 80 65 134 8 4 160 200 18 115 145 185 16 402 160 200 246 100 122,5 811 208 859 145 104
80
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3S (3LS) 11 ÷ 15 kW 2 POLES
DIMENSIONAL TABLE
X
Space fordissassembly
Dimensions (mm) WeightModelModel Ø Ø Ø n1 Ø Ø Ø Ø Ø
3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 H4 R W N1 M N2 A B C D F L L1 L2 L3 G Q P X kg
32-200/5,5 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 205 28 80 70 190 119 240 300 615 165 314 15 - 216 266 50 270 12 - 110 62,832-200/7,5 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 205 28 80 70 190 119 240 300 615 165 314 15 - 216 266 50 270 12 - 110 74,640-160/3,0 65 40 116 4 - 145 185 16 81 110 150 14 292 132 160 145 32 80 70 190 118 240 254 528 142 246 15 - 160 200 40 220 12 - 115 3940-160/4,0 65 40 116 4 - 145 185 16 81 110 150 14 292 132 160 161 20 80 70 190 118 240 254 550 142 253 15 - 190 240 50 220 12 - 115 41,540-200/5,5 65 40 116 4 - 145 185 16 81 110 150 14 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 115 63,240-200/7,5 65 40 116 4 - 145 185 16 81 110 150 14 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 115 69,650-125/3,0 65 50 116 4 - 145 185 16 96 125 165 16 292 132 160 145 32 100 70 190 138 240 254 548 142 246 15 - 160 200 40 220 12 - 125 4250-125/4,0 65 50 116 4 - 145 185 16 96 125 165 16 292 132 160 161 20 100 70 190 138 240 254 570 142 253 15 - 190 240 50 220 12 - 125 42,550-160/5,5 65 50 116 4 - 145 185 16 96 125 165 16 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 125 63,850-160/7,5 65 50 116 4 - 145 185 16 96 125 165 16 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 125 69,650-200/9,2 65 50 116 4 - 145 185 16 96 125 165 16 360 160 200 205 28 100 70 212 139 265 300 673 165 314 15 - 216 266 50 270 12 - 125 79,765-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 6065-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 6765-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 7065-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 198 28 100 95 212 149,5 280 300 673 165 314 15 - 216 266 50 270 12 - 145 7765-200/15 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 246 20 100 95 250 149,5 320 350 811 208 413 20 - 254 314 60 350 14 - 145 12865-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 246 20 100 95 250 149,5 320 350 855 208 413 20 - 254 314 60 350 14 - 145 14165-200/22 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 266 - 100 95 250 149,5 320 350 910 208 - - 241 279 330 83 - - 121 145 160
[1] Standard[2] On request
81
3S (3LS) 2 POLES
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
DIMENSIONAL TABLE
X
SA W
Space fordissassembly
n1 ÿ18
15
Dimensional tableModel3(L)S4
Dimensions (mm)
213254254296296296213213254254294294294254254296296296296254254254296296
401401401435435435401401435435487487512452452487487512512450450497497497
8881010108810101010101010101010101010101010
252292292340340252252292292340340340292292340340360360360340340340360360
108108108118118118118118118118130130130118118130130130130118118130130130
112132132160160160112112132132160160160132132160160160160160160160160160
140160160180180180180140140160160180180160160180180200200180180180200200
112112112140140140112112140140140140140140140140140140140140140140140140
140140140168168168140140168168168168168168168168168168168168168168168168
114118118119119119114114118118115115115114114115115115115
149.5149.5149.5149.5149.5
140190190190190190160160190190212212212190190212212212212212212212212212
190240240240240240210210210210265265265240240265265265265280280280280280
80808080808080808080
100100100100100100100100100100100100100100
141414141414141414141414141616161616161616161616
A B C D H H1 H2 L1 L2 M N1 N2 R S
707070707070707070707070707070707070709595959595
W
454545565656454556565656565656565656565656565656
TØD1 ØK1 ØP1 ØD2 ØK2 ØP2
165165165165165165185185185185185185185185185185185185185200200200200200
125125125125125125145145145145145145145145145145145145145160160160160160
SA
161616161616161616161616161616161616161818181818
969696969696
116116116116116116116116116116116116116134134134134134
140140140140140140150150150150150150150150150150150150150185185185185185
NI
444444444444444444488888
100100100100100100110110110110110110110125125125125125125145145145145145
76767676767681818181818181969696969696115115115115115
ØDNA
505050505050656565656565656565656565658080808080
ØDNM n1
323232323232404040404040405050505050506565656565
-------------------44444
444444444444444444488888
X
110110110110110110115115115115115115115125125125125125125145145145145145
Weightkg
15,520,720,728,928,930,117,617,623,223,233,333,335,523,523,534,034,030,030,024.82630
34.135.2
32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.565-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.5
[1] [2]
[1] Standard[2] On request
82
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3S4 (3LS4) UP TO 1,5 kW 4 POLES
DIMENSIONAL TABLE
555
100 63
16
43
160
202
Dimensions (mm) WeightModel Ø Ø n1 Ø Ø Ø Ø Ø Ø
3(L)S DNA DNM [1] [2] P1 K1 D1 SA P2 K2 D2 H H1 H2 W N1 N2 M A kg
50-200/2.2 65 50 4 - 116 145 185 16 96 125 165 360 160 200 70 212 265 139 296 42,865-160/2.2 80 65 8 4 134 160 200 18 115 145 185 360 160 200 95 212 280 149,5 296 43,765-200/2.2R 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 44,865-200/2.2 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 4565-200/3.0 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 48,2
83
3-3L SERIES3S4 (3LS4) 2,2 ÷ 3 kW 4 POLES
DIMENSIONAL TABLE
DIMENSIONAL T
Dimensions (mm) Weight
Model Ø Ø n1 Ø Ø Ø Ø Ø H33(L)P DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 [3] [4] R A B B1 D E N1 N2 N3 T kg
32-125/1,1 (M) 50 32 95 4 – 125 165 16 75 100 140 14 302 112 140 129 150 80 213 715 272 80 550 300 340 250 710 43,532-160/1,5 (M) 50 32 95 4 – 125 165 16 75 100 140 14 342 132 160 138 160 80 254 760 317 80 590 350 390 300 750 5132-160/2,2 (M) 50 32 95 4 – 125 165 16 75 100 140 14 342 132 160 138 160 80 254 760 317 80 590 350 390 300 750 53,5
32-200/3 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 145 – 80 296 809 366 80 590 350 390 300 750 6832-200/4 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 161 – 80 296 831 388 80 590 350 390 300 750 72
32-200/5,5 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 198 – 80 296 893 450 100 650 350 390 300 850 8832-200/7,5 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 198 – 80 296 893 450 100 650 350 390 300 820 99,8
40-125/1,5 (M) 65 40 115 4 – 145 185 16 80 110 150 14 302 112 140 138 160 80 213 760 317 80 550 300 340 250 710 48,540-125/2,2 (M) 65 40 115 4 – 145 185 16 80 110 150 14 302 112 140 138 160 80 213 760 317 80 550 300 340 250 710 51
40-160/3 65 40 115 4 – 145 185 16 80 110 150 14 342 132 160 145 – 80 254 809 366 80 590 350 390 300 750 77,540-160/4 65 40 115 4 – 145 185 16 80 110 150 14 342 132 160 161 – 80 254 831 388 80 590 350 390 300 750 64,5
40-200/5,5 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 8940-200/7,5 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 94,540-200/11 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 246 – 100 296 1076 613 100 800 380 420 330 1000 117
50-125/2,2 (M) 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 138 160 100 254 780 317 80 590 350 390 300 750 13250-125/3 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 145 – 100 254 829 366 80 590 350 390 300 750 7950-125/4 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 161 – 100 254 851 388 80 590 350 390 300 750 81,5
50-160/5,5 65 50 115 4 – 145 185 16 95 125 165 16 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 8950-160/7,5 65 50 115 4 – 145 185 16 95 125 165 16 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 94,550-200/9,2 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 198 – 100 296 951 488 100 650 350 390 300 850 10050-200/11 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 117,550-200/15 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 125,465-125/4 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 161 – 100 254 851 388 80 590 350 390 300 750 82
65-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 198 – 100 254 913 450 100 650 350 390 300 850 9065-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 198 – 100 254 913 450 100 650 350 390 300 850 9765-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 198 – 100 296 913 450 100 650 350 390 300 850 10365-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 198 – 100 296 951 450 100 650 350 390 300 850 10765-160/11 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 11465-160/15 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 11965-200/15 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 246 – 100 296 1076 613 100 800 380 420 330 1000 127
65-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 246 – 100 296 1120 657 100 800 380 420 330 1000 13965-200/22 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 266 – 100 296 1175 712 100 800 410 450 360 1000 182
[1] Standard[2] On request
84
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3P (3LP) 2 POLES
DIMENSIONAL TABLE
n1 ÿ18
Model3(L)P4
Dimensions (mm)
32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0
213254254296296296213213254254296296296254254296296296296296254254254296296296296296296
683683683717717717683683717717795795795737737795795795795863735735780780780829829829829
250300300300300300250250300300300300300300300300300300300300300300300300300300330330330
302342342390390390302302342342390390390342342390390410410410390390390410410410455455455
550510510510510510550550510590590590510510590590590590590590510510590590590590590590590
162182182210210210162162182182210210210182182210210210210210160160160160160160180180180
140160160180180180140140160160180180180160160180180200200200180180180200200200225225225
300350350350350350300300350350350350350350350350350350350350350350350350350350380380380
340390390390390390340340390390390390390390390390390390390390390390390390390390420420420
8080808080808080808080808080808080808080808080808080808080
8080808080808080808080808080808080808080100100100100100100100100100
240240240274274274240240274274332332332274274332332332332400272272317317317366366366366
710670670670670670710710670670750750750670670750750750750750670670750750750750750750750
1414141414141414141414141416161616161616161616161616161616
A B E F H H1 H2 N1 N2 X Y R TS ØD1 ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM
165165165165165165185185185185185185185185185185185185185185200200200200200200200200200
125125125125125125145145145145145145145145145145145145145145185185185185185185185185185
959595959595115115115115115115115115115115115115115115134134134134134134134134134
140140140140140140150150150150150150150165165165165165165165185185185185185185185185185
100100100100100100110110110110110110110125125125125125125125145145145145145145145145145
7575757575758080808080808095959595959595115115115115115115115115115
5050505050506565656565656565656565656565808080808080808080
3232323232324040404040404050505050505050656565656565656565
[1]
44444444444444444444888888888
[2]
--------------------444444444
37,041,041,053,553,554,546,546,544,544,561,561,564,045,045,052,552,564,064,070
48,649,856,162,663,771,574,174,277,5
Weightkg
[1] Standard[2] On request
n1
85
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3P (3LP) 4 POLES
DIMENSIONAL TABLE
Model3(L)SF
Dimensions (mm)
32-125/1,132-160/1,532-160/2,232-200/332-200/432-200/5,532-200/7,540-125/1,540-125/2,240-160/340-160/440-200/5,540-200/7,540-200/1150-125/2,250-125/350-125/450-160/5,550-160/7,550-200/9,250-200/1150-200/15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808080808080808080808080
100100100100100100100390390390
14141414141414141414141414141616161616161616
165165165165165165165185185185185185185185185185185185185185185185
A C E H H1 H2 L M N1 N2 P R SØD1
125125125125125125125145145145145145145145145145145145145145145145
ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM
96969696969696116116116116116116116116116116116116116116116
140140140140140140140150150150150150150150165165165165165165165165
100100100100100100100110110110110110110110125125125125125125125125
76767676767676818181818181819696969696969696
50505050505050656565656565656565656565656565
32323232323232404040404040405050505050505050
Model3(L)SF4
Dimensions (mm)
32-125/0,2532-160/0,37R32-160/0,3732-200/0,55R32-200/0,5532-200/0,7540-125/0,37R40-125/0,3740-160/0,55R40-160/0,5540-200/1,1R40-200/1,140-200/1,550-125/0,55R50-125/0,5550-160/1,1R50-160/1,150-200/1,5R50-200/1,550-200/2,2
213254254296296296213213254254294294294254254296296296296296
108108108118118118118118118118130130130118118130130130130130
252292292340340340252252292292340340340292292340340360360360
112132132160160160112112132132160160160132132160160160160160
130130130165165165130130165165165165165165165165165165165215
140160160180180180140140160160180180180160160180180200200200
M8M8M8M10M10M10M8M8M10M10M10M10M10M10M10M10M10M10M10M12
114118118119119119114114118118115115115114114115115115115115
140190190190190190160160190190212212212190190115115212212212
190240240240240240210210240240265265265240240212212265265265
2929292929292929292925252525252525252525
80808080808080808080
100100100100100100100100100100
1414141414141414141414141416161616161616
165165165165165165185185185185185185185185185185185185185185
A C E H H1 H2 L M N1 N2 P R SØD1
125125125125125125145145145145145145145145145145145145145145
ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM
969696969696116116116116116116116116116116116116116116
140140140140140140150150150150150150150165165165165165165165
100100100100100100110110110110110110110125125125125125125125
7676767676768181818181818196969696969696
5050505050506565656565656565656565656565
3232323232324040404040404050505050505050
86
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3SF - 3SF4 (3LSF - 3LSF4) 2 POLES
3SF4 (3LSF4) 4 POLES
DIMENSIONAL TABLE
DIMENSIONAL TABLE
Model3(L)PF
Dimensions (mm)
32-12532-16032-20040-12540-16040-20050-12550-16050-200
213254296213254296254296296
440440440440440460460460460
112132160112132160132160160
140160180140160180160180200
252292340252292340292340360
114118119114118115114115115
140190190160190212190212212
190240240210240265240265265
292929292925252525
8080808080100100100100
141414141414161616
165165165185185185185185185
125125125145145145145145145
959595
115115115115115115
A B H H1 H2 M N1 N2 P R SØD1 ØK1 ØP1
140140140150150150165165165
ØD2 ØK2 ØP2ØDNA ØDNM
100100100110110110125125125
757575808080959595
505050656565656565
323232404040505050
18,020,028,518,020,029,020,029,029,5
Weightkg
87
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
3(L)PF
DIMENSIONAL TABLE
88
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
4 POLES
Dimensional table 2 POLES
Motor Dimensions (mm)3S4 X
kW HP Size Type d1 d2 d3 L3 M Size Standard h S E
32-125/N 0,25 0,33 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-160/R 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-160/N 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-200/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-200/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-200/L 0,75 1 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-125/R 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8840-125/N 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8840-160/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-160/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-200/R 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-200/N 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-200/L 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-125/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9850-125/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9850-160/R 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-160/N 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/R 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/N 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/L 2,2 3 100 B35 22 28 43 63 M18 x 1,5 M8 x 8 UNI 5929 31,3 8 153
3S
Motor Dimensions (mm)Pump Type X
kW HP Size Type d1 d2 d3 L3 M Size Standard h S E
32-125/N 1,1 1,5 80 B5 19 33 19 43 16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-160/R 1,5 2 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11032-160/N 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11032-200/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12232-200/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12232-200/L 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14532-200/EL 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-125/R 1,5 2 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-125/N 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-160/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12240-160/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12240-200/R 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-200/N 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-200/L 11 15 160 B35 19 63 42 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17850-125/S 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-125/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 - 12250-125/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 - 12250-160/R 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-160/N 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-200/R 9,2 12,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-200/N 11 15 160 B35 19 63 42 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17850-200/L 15 20 160 B35 22 63 42 114 18 x 1,5 M8 x 8 UNI 5929 45,3 12 20965-125/R 4 5,5 112 B35 19 28 43 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12265-125/N 5,5 7,5 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-125/L 7,5 10 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/S 7,5 10 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/R 9,2 12,5 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/N 11 15 160 B35 19 42 63 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17865-160/L 15 20 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/R 15 20 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/N 18,5 25 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/L 22 30 180 B35 24 48 72 114 20 x 1,5 M10 x 10 UNI 5929 51,8 14 184
DIMENSIONAL TABLE 2 POLES
DIMENSIONAL TABLE 4 POLES
3S (3LS) Series coupling
Motor Dimensions (mm)3(L)P4
kW HP Size Type D H1 H2
32-125/0,25 0,25 0,33 71 B3 14 16,3 532-160/0,37R 0,37 0,5 71 B3 14 16,3 532-160/0,37 0,37 0,5 71 B3 14 16,3 532-200/0,55R 0,55 0,75 80 B3 19 21,8 632-200/0,55 0,55 0,75 80 B3 19 21,8 632-200/0,75 0,75 1 80 B3 19 21,8 640-125/0,37R 0,37 0,5 71 B3 14 16,3 540-125/0,37 0,37 0,5 71 B3 14 16,3 540-160/0,55R 0,55 0,75 80 B3 19 21,3 640-160/0,55 0,55 0,75 80 B3 19 21,3 640-200/1,1R 1,1 1,5 90 B3 24 27,3 840-200/1,1 1,1 1,5 90 B3 24 27,3 840-200/1,5 1,5 2 90 B3 24 27,3 850-125/0,55R 0,55 0,75 80 B3 19 21,3 650-125/0,55 0,55 0,75 80 B3 19 21,3 650-160/1,1R 1,1 1,5 90 B3 24 27,3 850-160/1,1 1,1 1,5 90 B3 24 27,3 850-200/1,5R 1,5 2 90 B3 24 27,3 850-200/1,5 1,5 2 90 B3 24 27,3 850-200/2,2 2,2 3 100 B3 28 31,3 865-125/0,55 0,55 0,75 80 B3 19 21,8 665-125/0,75 0,75 1,0 80 B3 19 21,8 665-125/1,1 1,1 1,5 90 B3 24 27,3 865-160/1,1 1,1 1,5 90 B3 24 27,3 865-160/1,5 1,5 2,0 90 B3 24 27,3 865-160/2,2 2,2 3,0 100 B3 28 31,3 865-200/2,2R 2,2 3,0 100 B3 28 31,3 865-200/2,2 2,2 3,0 100 B3 28 31,3 865-200/3,0 3,0 4,0 100 B3 28 31,3 8
89
PUMP SIDE MOTOR SIDE
3(L)P Series coupling
3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD
DIMENSIONAL TABLEMotor Dimensions (mm)
Pump typekW HP Size Type D H1 H2
32-125/1,1 1,1 1,5 80 B3 19 21,8 632-160/1,5 1,5 2 90 B3 24 27,3 832-160/2,2 2,2 3 90 B3 24 27,3 832-200/3,0 3 4 100 B3 28 31,3 832-200/4,0 4 5,5 112 B3 28 31,3 832-200/5,5 5,5 7,5 132 B3 38 41,3 1032-200/7,5 7,5 10 132 B3 38 41,3 1040-125/1,5 1,5 2 90 B3 24 27,3 840-125/2,2 2,2 3 90 B3 24 27,3 840-160/3,0 3 4 100 B3 28 31,3 840-160/4,0 4 5,5 112 B3 28 31,3 840-200/5,5 5,5 7,5 132 B3 38 41,3 1040-200/7,5 7,5 10 132 B3 38 41,3 1040-200/11 11 15 160 B3 42 45,3 1250-125/2,2 2,2 3 90 B3 24 27,3 850-125/3,0 3 4 100 B3 28 31,3 850-125/4,0 4 5,5 112 B3 28 31,3 850-160/5,5 5,5 7,5 132 B3 38 41,3 1050-160/7,5 7,5 10 132 B3 38 41,3 1050-200/9,2 9,2 12,5 132 B3 38 41,3 1050-200/11 11 15 160 B3 42 45,3 1250-200/15 15 20 160 B3 42 45,3 1265-125/4,0 4 5,5 112 B3 28 31,3 865-125/5,5 5,5 7,5 132 B3 38 41,3 1065-125/7,5 7,5 10 132 B3 38 41,3 1065-160/7,5 7,5 10 132 B3 38 41,3 1065-160/9,2 9,2 12,5 132 B3 38 41,3 1065-160/11 11 15 160 B3 42 45,3 1265-160/15 15 20 160 B3 42 45,3 1265-200/15 15 20 160 B3 42 45,3 1265-200/18,5 18,5 25 160 B3 42 45,3 1265-200/22 22 30 180 B3 48 51,8 14
3(L)P
90
MD-MMDCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature:
90°C (MD)-10°C÷+130°C (MMD)
MATERIALS• Pump body and bracket in cast iron • Shaft in AISI 304• Mechanical seal in carbon/ceramic/NBR (MD)
in SiC/SiC/EPDM (MMD)• Impeller in cast iron and brass B10
TECHNICAL DATA• Asincronous 2 and 4 poles motor • Insulation class F• Protection degree IP55 (MD), IP54 (MMD) • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz
up to 4kW included, 400/690V ± 10% above • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version
End suction centrifugal pumps in accordance with EN 733 (ex DIN 24255) made of cast iron, appli-cations include water boosting, heating systems, air-conditioning, washing systems and many otherindustrial applications.
91
MD-MMDCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
DIMENSIONAL TABLE
MD 2 POLES
Pump type Dimensions (mm)DNA P1 K1 D1 SA DNM P2 K2 D2 SM H H1 H2 [1] [2] R W N1 M N2 M1 F A B C V[1]
MD 32-125/1.1 50 102 125 165 20 32 78 100 140 18 252 112 140 122 139 80 70 140 100 190 50 13 205 431 230 PG13.5MD 32-125/1.5 50 102 125 165 20 32 78 100 140 18 252 112 140 122 139 80 70 140 100 190 50 13 205 431 230 PG13.5MD 32-160/1.5 50 102 125 165 20 32 78 100 140 18 292 132 160 122 139 80 70 190 100 240 50 13 245 431 230 PG13.5MD 32-160/2.2 50 102 125 165 20 32 78 100 140 18 292 132 160 122 139 80 70 190 100 240 50 13 245 431 230 PG13.5MD 32-200/3 50 102 125 165 20 32 78 100 140 18 340 160 180 122 – 80 70 190 100 240 50 13 290 431 252 PG13.5MD 32-200/4 50 102 125 165 20 32 78 100 140 18 340 160 180 134 – 80 70 190 100 240 50 13 290 459 254 PG 16MD 32-250/5.5 50 102 125 165 20 32 78 100 140 18 405 180 225 153 – 100 95 250 125 320 65 15 352 496 275 PG 16MD 32-250/7.5 50 102 125 165 20 32 78 100 140 18 405 180 225 153 – 100 95 250 125 320 65 15 352 540 275 PG 16MD 32-250/9.2 50 102 125 165 20 32 78 100 140 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 32-250/11 50 102 125 165 20 32 78 100 140 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 40-125/1.5 65 122 145 185 20 40 88 110 150 18 252 112 140 122 139 80 70 160 100 210 50 13 235 431 230 PG13.5MD 40-125/2.2 65 122 145 185 20 40 88 110 150 18 252 112 140 122 139 80 70 160 100 210 50 13 235 431 230 PG13.5MD 40-160/3 65 122 145 185 20 40 88 110 150 18 292 132 160 122 – 80 70 190 100 240 50 13 245 431 230 PG13.5MD 40-160/4 65 122 145 185 20 40 88 110 150 18 292 132 160 134 – 80 70 190 100 240 50 13 245 459 232 PG 16MD 40-200/5.5 65 122 145 185 20 40 88 110 150 18 340 160 180 153 – 100 70 212 100 265 50 13 290 495 278 PG 16MD 40-200/7.5 65 122 145 185 20 40 88 110 150 18 340 160 180 153 – 100 70 212 100 265 50 13 290 495 278 PG 16MD 40-250/11 65 122 145 185 20 40 88 110 150 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 40-250/13 65 122 145 185 20 40 88 110 150 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 50-125/2.2 65 122 145 185 20 50 102 125 165 20 292 132 160 122 139 100 70 190 100 240 50 13 230 431 230 PG13.5MD 50-125/3 65 122 145 185 20 50 102 125 165 20 292 132 160 122 – 100 70 190 100 240 50 13 230 451 230 PG13.5MD 50-125/4 65 122 145 185 20 50 102 125 165 20 292 132 160 134 – 100 70 190 100 240 50 13 230 479 232 PG 16MD 50-160/5.5 65 122 145 185 20 50 102 125 165 20 340 160 180 153 – 100 70 212 100 265 50 13 260 495 278 PG 16MD 50-160/7.5 65 122 145 185 20 50 102 125 165 20 340 160 180 153 – 100 70 212 100 265 50 13 260 495 278 PG 16MD 50-200/9.2 65 122 145 185 20 50 102 125 165 20 360 160 200 181 – 100 70 212 100 265 50 13 300 585 355 PG 21MD 50-200/11 65 122 145 185 20 50 102 125 165 20 360 160 200 181 – 100 70 212 100 265 50 13 300 585 355 PG 21MD 65-125/5.5 80 138 160 200 22 65 122 145 185 20 340 160 180 153 – 100 95 212 125 280 65 13 260 495 278 PG 16MD 65-125/7.5 80 138 160 200 22 65 122 145 185 20 340 160 180 153 – 100 95 212 125 280 65 13 260 495 278 PG 16MD 65-160/11 80 138 160 200 22 65 122 145 185 20 360 160 200 181 – 100 95 212 125 280 65 13 300 585 355 PG 21MD 65-160/15 80 138 160 200 22 65 122 145 185 20 360 160 200 181 – 100 95 212 125 280 65 13 300 585 355 PG 21
[1] = 3~[2] = 1~
92
DIMENSIONAL TABLE
MMD 2 POLES
Pump type Dimensions (mm) WeightFig. DNA P1 K1 D1 DNM P2 K2 D2 H H1 H2 H3 R W N1 M N2 M1 F A B C D [kg]
MMD 65-250/22 2 80 138 160 200 65 122 145 185 450 180 250 230 100 293 280 – 320 55 22 365 810 241 14 144MMD 65-250/30 2 80 138 160 200 65 122 145 185 450 200 250 257 100 325 318 – 360 60 24 400 905 305 18 172MMD 65-250/37 2 80 138 160 200 65 122 145 185 450 200 250 257 100 325 318 – 360 60 24 400 905 305 18 190MMD 80-160/10 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 74MMD 80-160/12.5 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 81.5MMD 80-160/15 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 88.5MMD 80-200/18.5 2 100 158 180 220 80 138 160 200 430 180 250 230 125 293 280 – 320 55 22 360 835 241 14 132MMD 80-200/22 2 100 158 180 220 80 138 160 200 430 180 250 230 125 293 280 – 320 55 22 360 835 241 14 150MMD 80-200/30 2 100 158 180 220 80 138 160 200 430 200 250 257 125 325 318 – 360 60 24 400 930 305 18 192MMD 80-200/37 2 100 158 180 220 80 138 160 200 430 200 250 257 125 325 318 – 360 60 24 400 930 305 18 210MMD 80-250/37 2 100 158 180 220 80 138 160 200 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 196MMD 100-200/22 2 125 188 210 250 100 158 180 220 480 180 280 230 125 293 318 – 320 55 22 385 835 241 14 160MMD 100-200/30 2 125 188 210 250 100 158 180 220 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 202MMD 100-200/37 2 125 188 210 250 100 158 180 220 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 220
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
DIMENSIONAL TABLE
MD 2 POLES
Pump type Dimensions (mm)DNA P1 K1 D1 SA DNM P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 M1 F A B C V
MD 40-250/15 65 122 145 185 20 40 88 110 150 18 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/15 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/18.5 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/22 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 65-200/18.5 80 138 160 200 22 65 122 145 185 20 405 180 225 230 100 95 250 125 320 65 15 310 736 548 PG 21MD 65-200/22 80 138 160 200 22 65 122 145 185 20 405 180 225 230 100 95 250 125 320 65 15 310 736 548 PG 21
MD-MMD
93
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
DIMENSIONAL TABLE
MMD4 4 POLES
Pump type Dimensions (mm) WeightDNA n1 f1 P1 K1 D1 DNM n2 f2 P2 K2 D1 H H1 H2 H3 R W N1 M N2 M1 F A B D [kg]
MMD4 32-125/0.25R 50 4 18 102 125 165 32 4 18 78 100 140 252 112 140 107 80 70 140 100 190 50 12 205 405 14 19.5MMD4 32-125/0.25 50 4 18 102 125 165 32 4 18 78 100 140 252 112 140 107 80 70 140 100 190 50 12 205 405 14 19.5MMD4 32-160/0.37 50 4 18 102 125 165 32 4 18 78 100 140 292 132 160 107 80 70 190 100 240 50 12 240 405 14 23MMD4 32-200/0.75 50 4 18 102 125 165 32 4 18 78 100 140 340 160 180 118 80 70 190 100 240 50 12 255 425 14 30MMD4 32-200/0.92 50 4 18 102 125 165 32 4 18 78 100 140 340 160 180 118 80 70 190 100 240 50 12 255 425 14 31MMD4 32-250/1.1 50 4 18 102 125 165 32 4 18 78 100 140 405 180 225 149 100 95 250 125 320 65 12 320 485 14 47MMD4 32-250/1.5 50 4 18 102 125 165 32 4 18 78 100 140 405 180 225 149 100 95 250 125 320 65 12 320 485 14 49MMD4 40-125/0.25 65 4 18 122 145 185 40 4 18 88 110 150 252 112 140 107 80 70 160 100 210 50 12 230 405 14 20.5MMD4 40-125/0.37 65 4 18 122 145 185 40 4 18 88 110 150 252 112 140 107 80 70 160 100 210 50 12 230 405 14 21.5MMD4 40-160/0.55 65 4 18 122 145 185 40 4 18 88 110 150 292 132 160 107 80 70 190 100 240 50 12 230 405 14 25MMD4 40-200/1.1 65 4 18 122 145 185 40 4 18 88 110 150 340 160 180 149 100 70 212 100 265 50 12 285 485 14 36MMD4 40-200/1.5 65 4 18 122 145 185 40 4 18 88 110 150 340 160 180 149 100 70 212 100 265 50 12 242 485 14 36MMD4 40-250/1.5 65 4 18 122 145 185 40 4 18 88 110 150 405 180 225 149 100 95 250 125 320 65 12 325 485 14 47.5MMD4 40-250/2.2 65 4 18 122 145 185 40 4 18 88 110 150 405 180 225 159 100 95 250 125 320 65 12 352 525 14 54MMD4 50-125/0.37 65 4 18 122 145 185 50 4 18 102 125 165 292 132 160 107 100 70 190 100 240 50 12 246 425 14 25MMD4 50-125/0.55 65 4 18 122 145 185 50 4 18 102 125 165 292 132 160 107 100 70 190 100 240 50 12 246 425 14 26MMD4 50-160/0.75 65 4 18 122 145 185 50 4 18 102 125 165 340 160 180 118 100 70 212 100 265 50 12 269 445 14 32MMD4 50-160/0.92 65 4 18 122 145 185 50 4 18 102 125 165 340 160 180 118 100 70 212 100 265 50 12 269 445 14 33MMD4 50-200/1.1 65 4 18 122 145 185 50 4 18 102 125 165 360 160 180 159 100 70 212 100 265 50 12 285 485 14 38MMD4 50-200/1.5 65 4 18 122 145 185 50 4 18 102 125 165 360 160 180 149 100 70 212 100 265 50 12 285 485 14 40MMD4 50-250/2.2 65 4 18 122 145 185 50 4 18 102 125 165 405 180 225 159 100 95 250 125 320 65 14 333 525 14 57MMD4 50-250/3.0 65 4 18 122 145 185 50 4 18 102 125 165 405 180 225 159 100 95 250 125 320 65 14 333 525 14 63MMD4 65-125/0.75 80 4 18 138 160 200 65 4 18 122 145 185 340 160 180 118 100 95 212 125 280 65 12 286 445 14 32MMD4 65-160/1.1 80 4 18 138 160 200 65 4 18 122 145 185 360 160 200 149 100 95 212 125 280 65 12 288 485 14 37.5MMD4 65-160/1.5 80 4 18 138 160 200 65 4 18 122 145 185 360 160 200 149 100 95 212 125 280 65 12 288 485 14 40MMD4 65-200/2.2 80 4 18 138 160 200 65 4 18 122 145 185 405 180 225 159 100 95 250 125 320 65 14 328 525 14 51MMD4 65-200/3.0 80 4 18 138 160 200 65 4 18 122 145 185 405 180 225 159 100 95 250 125 320 65 14 328 525 14 57MMD4 65-250/4.0 80 4 18 138 160 200 65 4 18 122 145 185 450 200 250 159 100 120 280 160 360 80 14 365 535 14 80MMD4 65-250/5.5 80 4 18 138 160 200 65 4 18 122 145 185 450 200 250 184 100 120 280 160 360 80 14 365 640 14 90
MD-MMD
94
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
DIMENSIONAL TABLE
MMD4 4 POLES
Pump type Dimensions (mm) WeightDNA n1 f1 P1 K1 D1 DNM n2 f2 P2 K2 D2 H H1 H2 H3 R W N1 M N2 M1 F A B D [kg]
MMD4 80-160/1.5 100 8 18 158 180 220 80 4 18 138 160 200 405 180 225 149 125 95 250 125 320 65 14 330 510 14 45MMD4 80-160/2.2 100 8 18 158 180 220 80 4 18 138 160 200 405 180 225 159 125 95 250 125 320 65 14 330 550 14 51MMD4 80-200/3.0 100 8 18 158 180 220 80 4 18 138 160 200 430 180 250 159 125 95 280 125 345 65 12 355 550 14 66MMD4 80-250/4.0 100 8 18 158 180 220 80 4 18 138 160 200 430 180 250 159 125 95 280 125 345 65 12 355 560 14 73MMD4 80-250/5.5 100 8 18 158 180 220 80 4 18 138 160 200 480 200 280 184 125 120 315 160 400 80 14 400 665 18 96MMD4 80-250/7.5 100 8 18 158 180 220 80 4 18 138 160 200 480 200 280 184 125 120 315 160 400 80 14 400 665 18 106MMD4 100-200/4.0 125 8 18 188 210 250 100 8 18 158 180 220 480 200 280 159 125 120 280 160 360 80 14 385 560 18 78MMD4 100-200/5.5 125 8 18 188 210 250 100 8 18 158 180 220 480 200 280 184 125 120 280 160 360 80 14 385 665 18 90MMD4 100-250/7.5 125 8 18 188 210 250 100 8 18 158 180 220 505 225 280 184 140 120 315 160 400 80 14 420 675 18 112MMD4 100-250/9.2 125 8 18 188 210 250 100 8 18 158 180 220 505 225 280 184 140 120 315 160 400 80 14 420 675 18 118MMD4 125-200/5.5 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 124MMD4 125-200/7.5R 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 134MMD4 125-200/7.5 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 134MMD4 125-200/9.2 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 770 18 140MMD4 125-250/11 150 8 22 212 240 285 125 8 18 188 210 250 605 250 355 255 140 120 315 160 400 80 16 470 700 18 162MMD4 125-250/15 150 8 22 212 240 285 125 8 18 188 210 250 605 250 355 255 140 120 315 160 400 80 16 470 855 18 190MMD4 150-200/7.5 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 167MMD4 150-200/9.2 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 173MMD4 150-200/11 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 175MMD4 150-200/15 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 875 24 203MMD4 200-250/18.5R 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 278MMD4 200-250/18.5 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 278MMD4 200-250/22R 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 300MMD4 200-250/22 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 300
MD-MMD
95
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
PERFORMANCE CHART MD/MMD series 2 POLES
R.P.M. ≈ 2900 min-1
Test fluid: Clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
MD-MMDTO
TAL
HEAD
96
*Suction head has not to exceed 2 m**Positive 1 m suction head
PERFORMANCE TABLE/PERFORMANCE TABLE
PERFORMANCE TABLE/PERFORMANCE TABLE
Motor Q=Capacityl/min 0 100 200 250 280 320 400 550 600 667 800 1000 1100 1150 1200 1400 1900 2000 2200 2300 2400
Pump type m3/h 0 6 12 15 17 19 24 33 36 40 48 60 66 69 72 84 114 120 132 138 144kW HP H=Total Head
MD 32-125/1.1 * 1.1 1.5 23 22.5 20.5 18.5 - - - - - - - - - - - - - - - - -MD 32-125/1.5 * 1.5 2 24 23.5 21.5 19.7 18.5 16.6 12 - - - - - - - - - - - - - -MD 32-160/1.5 * 1.5 2 28 27 24 22 20.5 - - - - - - - - - - - - - - - -MD 32-160/2.2 * 2.2 3 35.5 34.5 32 30 28.5 - - - - - - - - - - - - - - - -MD 32-200/3.0 3 4 43 41 36.5 33 30.5 - - - - - - - - - - - - - - - -MD 32-200/4.0 4 5.5 52 50.5 47 44.5 42.5 - - - - - - - - - - - - - - - -MD 32-250/5.5 5.5 7.5 58 57 54 51 49 45 - - - - - - - - - - - - - - -MD 32-250/7.5 7.5 10 71 70 67 64 62 58 - - - - - - - - - - - - - - -MD 32-250/9.2 9.2 12.5 84 83 80 78 76 73 - - - - - - - - - - - - - - -MD 32-250/11 11 15 95 94 91 89 87 84 - - - - - - - - - - - - - - -MD 40-125/1.5 * 1.5 2 20 19.5 18.4 17.7 17.2 16.5 14.6 10.3 8.5 - - - - - - - - - - - -MD 40-125/2.2 * 2.2 3 25.5 25 23.5 23 22.5 22 20.5 16.9 15.5 - - - - - - - - - - - -MD 40-160/3.0 3 4 31.5 30.5 29 28 27.5 26.5 25 21 19 - - - - - - - - - - - -MD 40-160/4.0 4 5.5 39 38 36.5 36 33.5 35 33 29.5 28 - - - - - - - - - - - -MD 40-200/5.5 5.5 7.5 48.5 48 47 46 45.5 44.5 42.5 37.5 - - - - - - - - - - - - -MD 40-200/7.5 7.5 10 58 57.5 56.5 55.5 55 54.5 52.5 47.5 45 - - - - - - - - - - - -MD 40-250/11 11 15 74.5 - 73 72 71.5 70 66.5 58.5 55 - - - - - - - - - - - -MD 40-250/13 13 17.5 85.5 - 84 83.5 82.5 81.5 78 69 65 - - - - - - - - - - - -MD 40-250/15 15 20 94.5 - 93 92 91.5 90.5 88 78 74 - - - - - - - - - - - -MD 50-125/2.2 * 2.2 3 17.5 - - - - - 16 14.8 14.3 13.5 11.7 8.5 - - - - - - - - -MD 50-125/3.0 3 4 21 - - - - - 19.5 18.6 18.2 17.6 16.1 13 - - - - - - - - -MD 50-125/4.0 4 5.5 25.5 - - - - - 24 23 23 22 21 17.8 16 - - - - - - - -MD 50-160/5.5 5.5 7.5 33.5 - - - - - 32.5 31 30.5 30 28 24.5 22.5 - - - - - - - -MD 50-160/7.5 7.5 10 39 - - - - - 38 37 36.5 35.5 34 31 29 28 27 - - - - - -MD 50-200/9.2 9.2 12.5 50 - - - - - 48 46 45 44 41 36 33 - - - - - - - -MD 50-200/11 11 15 56 - - - - - 54.5 53 52 51 48.5 43.5 40.5 39 37 - - - - - -MD 50-250/15 15 20 71 - - - - - 69 67 66 64 60.5 52.5 47 - - - - - - - -MD 50-250/18.5 18.5 25 82 - - - - - 80 78.5 77.5 76 72.5 65 60 57 - - - - - - -MD 50-250/22 22 30 93 - - - - - 91 89.5 88.5 87 84 77 72.5 70 - - - - - - -MD 65-125/5.5 5.5 7.5 24 - - - - - - - 23.2 23 22.5 21.5 20.5 20.5 20 18.2 12.5 - - - -MD 65-125/7.5 7.5 10 27.5 - - - - - - - 26.5 26 25.5 24.5 24 23.5 23 21.5 16.3 15 - - -MD 65-160/11 11 15 34.5 - - - - - - - - 34 33.5 33 32.5 32 32 30.5 26.5 25.5 23 22 -MD 65-160/15 15 20 39 - - - - - - - - - 38 37.5 37 36.5 35 31 30.5 28.5 28.5 27 26MD 65-200/18.5 18.5 25 55 - - - - - - - - - 53.5 52.5 51.5 51 50.5 48.5 42 40.5 37 - -MD 65-200/22 22 30 61 - - - - - - - - - 59.5 58.5 58 57.5 57 55.5 50 49 46 - -
Pump typeMotor Q=Capacity
l/min 0 800 1000 1250 1500 1750 2000 2250 2500 2750 3000 3500 4000 4500m3/h 0 48 60 75 90 105 120 135 150 165 180 210 240 270
kW HP H=Total HeadMMD 65-250/22 22 30 65 64 63 61 57 53 - - - - - - - - -MMD 65-250/30 30 40 78 77 76 74 70 66 60 53* - - - - - - -MMD 65-250/37 37 55 86.5 86 85 83 79 75 70 64* - - - - - - -MMD 80-160/10 10 13.6 24.6 - 24 23 22 21 19.5 18 16.5 15* - - - - -MMD 80-160/12.5 12.5 17 29.5 - 28.5 28 27 26 24.5 23 21.5 20 18.5* - - - -MMD 80-160/15 15 20 35 - 34 33.3 32.5 31.8 31 29 27.5 26 24.3 - - - -MMD 80-200/18.5 18.5 25 42.2 - 42 41 40 38.5 37 35 33 30.5 28 - - - -MMD 80-200/22 22 30 47.2 - 47 46.5 45.5 44.5 43 41 39 37 34 - - - -MMD 80-200/30 30 40 55.5 - 55 54 53 52 51 49 47 45 43 37 - - -MMD 80-200/37 37 55 57.5 - 57 56.8 56.5 56 55 54 52.5 51 48 42 - - -MMD 80-250/37 37 55 68.5 - - 67.5 67 66.2 65 63.3 61 58.3 55 47 - - -MMD 100-200/22 22 30 40 - - - 38.5 38 37 36 34.5 33 31.5 28 24 - -MMD 100-200/30 30 40 48 - - - 47 46.3 45.6 44.8 43.7 42.4 41 38 34.6* 30** -MMD 100-200/37 37 55 54.2 - - - 53.7 53.3 53 52 51 50 49 46 43* 38** -
*Available also for single-phase version
DIMENSIONAL TABLE
CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
MD-MMD
97
PERFORMANCE CHART MMD4 series 4 POLES
MD-MMDCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
R.P.M. ≈ 1450 min-1
test fluid: Clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
98
DIMENSIONAL TABLE
MD-MMDCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron
Pump typeMotor Q=Capacity
l/min 0 50 75 100 125 150 175 200 225 250 275 300 350 400 450 500 550 600 650 700 800 900 1000 1100 1200 1300 1400 1500 1750 2000 2250m3/h 0 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 21 24 27 30 33 36 39 42 48 54 60 66 72 78 84 90 105 120 135
kW HP H=Total headMMD4 32-125/0,25 R 0.25 0.33 4.8 4.4 4 3.5 3 2.2 - - - - - - - - - - - - - - - - - - - - - - - - -MMD4 32-125/0,25 0.25 0.33 6.3 6.2 6.1 5.8 5.3 4.6 3.8 3 - - - - - - - - - - - - - - - - - - - - - - -MMD4 32-160/0,37 0.37 0.5 9.6 - 9.2 8.9 8.3 7.7 6.8 5.8 4.7 - - - - - - - - - - - - - - - - - - - - - -MMD4 32-200/0,75 0.75 1.0 13.5 - 12.8 12.4 11.9 11.3 10.6 9.8 8.9 8 7 6 - - - - - - - - - - - - - - - - - - -MMD4 32-200/0,92 0.92 1.25 15 - 14.6 14.3 13.8 13.3 12.7 11.8 10.9 10 9 8 - - - - - - - - - - - - - - - - - - -MMD4 32-250/1,1 1.1 1.5 19 - 18.5 18 17.5 17 15.9 14.5 12.8 11 - - - - - - - - - - - - - - - - - - - - -MMD4 32-125/1,5 1.5 2 22.5 - 22 21.6 21.2 20.5 19.4 18 16.5 15 13* - - - - - - - - - - - - - - - - - - - -MMD4 40-125/0,25 0.25 0.33 4.8 - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.9 2.4 - - - - - - - - - - - - - - - - - - -MMD4 40-125/0,37 0.37 0.5 6.4 - - 6.3 6.2 6.1 6 5.8 5.5 5.2 4.9 4.4 3* - - - - - - - - - - - - - - - - - -MMD4 40-160/0,55 0.55 0.75 9.2 - - 8.8 8.6 8.4 8.1 7.7 7.3 6.9 6.4 5.9 4.4 - - - - - - - - - - - - - - - - - -MMD4 40-200/1,1 R 1.1 1.5 12.9 - - 12.7 12.5 12.1 11.7 11.2 10.7 10.1 9.5 8.5 6.8 - - - - - - - - - - - - - - - - - -MMD4 40-200/1,1 1.1 1.5 14.5 - - 14.2 14 13.8 13.4 13 12.5 11.8 11 10.2 8.3 6 - - - - - - - - - - - - - - - - -MMD4 40-250/1,5 1,5 2 18.7 - - 18.3 18 17.7 17.4 17 16.7 16.2 15.6 15 13.7 12 - - - - - - - - - - - - - - - - -MMD4 40-250/2,2 2.2 3 23.2 - - 22.5 22.3 22 21.7 21.4 21.2 20.5 20.2 19.5 18.5 17 - - - - - - - - - - - - - - - - -MMD4 50-125/0,37 0.37 0.5 5.4 - - - - 5.3 5.3 5.2 5.1 5 4.9 4.8 4.5 4.1 3.6 3 - - - - - - - - - - - - - - -MMD4 50-125/0.55 0.55 0.75 6.5 - - - - 6.4 6.3 6.3 6.2 6.1 6 5.9 5.5 5.2 4.9 4.4 - - - - - - - - - - - - - - -MMD4 50-160/0,75 0.75 1.0 8.3 - - - - - - 8.1 8 7.9 7.8 7.7 7.4 7 6.6 6 5.1 4 - - - - - - - - - - - - -MMD4 50-160/0,92 0.92 1.25 9.1 - - - - - - 9 8.9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 6.4 5.5 - - - - - - - - - - - - -MMD4 50-200/1,1 1.1 1.5 12.6 - - - - - - 12.3 12.2 12 11.8 1.5 10.8 10 9 8 7 5.8 - - - - - - - - - - - - -MMD4 50-200/1,5 1.5 2 14.3 - - - - - - 14.1 14 13.9 13.7 13.5 12.8 12 11.3 10.2 9 7.8 6.4 - - - - - - - - - - - -MMD4 50-250/2,2 2.2. 3 19.5 - - - - - - 18.5 18.3 18.1 17.8 17.5 17 16.2 15.5 14.5 13.5 12.5 11.3 10 - - - - - - - - - - -MMD4 50-250/3 3 4 23 - - - - - - 22.5 22.4 22.3 22.2 22 21.5 20.9 20.2 19.4 18.5 17.5 16.3 14.7 - - - - - - - - - - -MMD4 65-125/0,75 0.75 1.0 6 - - - - - - - - - - 5.8 5.7 5.6 5.5 5.3 5.1 4.9 4.6 4.4 3.9 - - - - - - - - - -MMD4 65-160/1,1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 8.1 8 7.8 7.4 6.8 5.8 5 - - - - - - - -MMD4 65-160/1,5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.6 9.4 9.2 9 8.4 7.5 6.5 - - - - - - - -MMD4 65-200/2,2 2.2 3 12.6 - - - - - - - - - - - - 12.5 12.4 12.3 12.2 12.1 12 11.7 11.1 10.5 9.6 8.5 - - - - - - -MMD4 65-200/3 3 4 15,4 - - - - - - - - - - - - 15.3 15.3 15.2 15.1 15 14.8 14.6 14.3 13.6 12.8 12 11 - - - - - -MMD4 65-250/4 4 5.5 20 - - - - - - - - - - - - - - 19.5 19.3 19.1 18.8 18.5 17.5 16.5 15.5 14 12.5 10.4 - - - - -MMD4 65-250/5.5 5.5 7.5 23.3 - - - - - - - - - - - - - - 23 22.8 22.6 22.4 22.2 21.4 20.6 19.7 18.7 17.3 15.7 14 - - - -MMD4 80-160/1,5 1.5 2 8 - - - - - - - - - - - - - - - - 7.7 7.6 7.5 7.3 7 6.7 6.4 6.1 5.7 5.4 5 - - -MMD4 80-160/2,2 2.2 3 10 - - - - - - - - - - - - - - - - 9.7 9.6 9.5 9.3 9 8.8 8.5 8.2 7.9 7.5 7.1 6 - -MMD4 80-200/3 3 4 12.8 - - - - - - - - - - - - - - - - 12 11.9 11.7 11.5 11.3 11 10.5 10 9.5 9 8.5 7 - -MMD4 80-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - - 14.4 14.3 14.2 14 13.8 13.5 13.1 12.6 12.2 11.6 11 9 6.5 -MMD4 80-250/5,5 5.5. 7.5 20 - - - - - - - - - - - - - - - - - - - 19.2 18.9 18.5 18 17.6 17.1 16.5 16 14 12 -MMD4 80-250/7,5 7.5 10 23.5 - - - - - - - - - - - - - - - - - - - 22.3 22.1 21.9 21.7 21.3 21 20.5 20 18.5 16.9 14.5
*Suction head has not to exceed 2 m**Positive 1 m suction head
Pump typeMotore Q=Capacity
l/min 0 900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 2750 3000 3500 3700 4000 4500 5000 5500 6500 7000 8000 8500 9000 9500 10000m3/h 0 54 60 66 72 78 84 90 105 120 135 150 165 180 210 222 240 270 300 330 390 420 480 510 540 570 600
kW HP H=Total headMMD4 100-200/4 4 5.5 13 12.3 12.2 12 11.8 11.6 11.4 11.2 10.3 9.3 8 6.6 4.8* - - - - - - - - - - - - -- -MMD4 100-200/5,5 5.5 7.5 14.7 14.5 14.4 14.2 14 13.8 13.6 13.4 12.8 12 11 9.8 8.5 - - - - - - - - - - - - - -MMD4 100-250/7,5 7.5 10 20 - 19.5 19.3 19.1 18.9 18.7 18.5 17.5 16.5 15.2 14 12 - - - - - - - - - - - - - -MMD4 100-250/9.2 9.2 12.5 22.4 - 22 21.9 21.8 21.7 21.6 21.5 20.5 19.5 18.5 17 15 12.8* - - - - - - - - - - - - -MMD4 125-200/5,5 5.5 5.5 11.2 - - - - - - 10.5 10.3 9.9 9.5 9.1 8.5 7.9 6.4 5.7 - - - - - - - - - - -MMD4 125-200/7.5 R 7.5 10 12.4 - - - - - - 11.8 11.6 11.3 11 10.6 10.2 9.6 8.3 7.7 6.7 - - - - - - - - - -MMD4 125-200/7.5 7.5 10 13.7 - - - - - - - 12.9 12.7 12.4 12.1 11.7 11.2 10.1 9.6 8.7 7.1* - - - - - - - - -MMD4 125-200/9.2 9.2 12.5 15 - - - - - - - 14.3 14.1 13.8 13.6 13.2 12.8 11.8 11.3 10.6 9.2 7.6** - - - - - - - -MMD4 125-250/11 11 15 18.6 - - - - - - - 17.2 16.7 16.2 15.5 14.8 13.9 12 11.3 10 - - - - - - - - - -MMD4 125-250/15 15 20 22 - - - - - - - 21 20.5 20.1 19.5 18.9 18.2 16.6 16 14.8 12.8 - - - - - - - - -MMD4 150-200/7.5 7.5 10 11.6 - - - - - - - - 11 10.7 10.4 10.1 9.7 8.8 8.4 7.8 6.6 5.3 - - - - - - - -MMD4 150-200/9.2 9.2 12.5 12.5 - - - - - - - - 12 11.8 11.6 11.2 10.9 10.2 9.8 9.2 8 6.8 5.6 - - - - - - -MMD4 150-200/11 11 15 14.5 - - - - - - - - - - 13.7 13.5 13.2 12.5 12.2 11.7 10.8 9.8 8.7 6.1 - - - - - -MMD4 150-200/15 15 20 15.8 - - - - - - - - - - 15.2 14.9 14.7 14.2 13.8 13.4 12.5 11.6 10.5 8.2 6.8 - - - - -MMD4 200-250/18.5 R 18.5 25 16 - - - - - - - - - - - - 14.9 14.5 14.3 14.1 13.6 13 12.3 11 10.3 8.6 7.8 - - -MMD4 200-250/18.5 18.5 25 16.9 - - - - - - - - - - - - 15.9 15.5 15.3 15.2 14.7 14.2 13.6 12.3 11.6 10 9.1 8.2 - -MMD4 200-250/22 R 22 30 19.3 - - - - - - - - - - - - - 18 17.8 17.6 17.1 16.6 16 14.7 13.9 12.2 11.2 10.1 9 -MMD4 200-250/22 22 30 20.4 - - - - - - - - - - - - - 19.1 18.9 18.8 18.3 17.8 17.3 16 15.3 13.7 12.7 11.7 10.7 9.6
PERFORMANCE TABLE/PERFORMANCE TABLE
99
WINNER4” BOREHOLE CENTRIFUGAL PUMPS
SPECIFICATIONS• Maximum immersion: 100 m • Maximum liquid temperature: 30°C with water fillled motor
40°C with oil filled motor• Maximum sand content: 50 ppm
MATERIAL• External casing, suction and discharge ports, filter
and diffuser casing in AISI 304 • Impeller and diffuser in tecnopolymer• Shaft in AISI 304• Mechanical seal in carbon/ceramic/NBR
TECHNICAL DATA• 2 poles motor, water filled (WY version)
or oil fillled (OY version) • Maximum startings/hour: 30 • Insulation class F• Protection degree IP58 • 1~220V ± 6% 50Hz, 3~380V ± 6% 50Hz • DNM1”1/4 for A-B-C models, 2” for D-E models
4" borehole multistage centrifugal pumps with a closed impeller constructed from noryl, outer casingand flanges are stainless steel AISI 304. Applications include clean water extraction from boreholes,pressure boosting for domestic, farming and industrial applications. Installation can be horizontal aswell as vertical. The Winner can be fitted to any NEMA standard motor.
100
WINNER
Pump type kW Absorbed Current (A)CapacitorµF Vc
380V1~
220V3~
PERFORMANCE TABLE
Single-phase220V 50Hz
WYM 050 A1/14WYM 075 A1/21 WYM 100 A1/28WYM 050 B2/7 WYM 075 B2/10WYM 100 B2/14 WYM 150 B2/21WYM 200 B2/28 WYM 300 B2/40WYM 050 C4/4 WYM 075 C4/6WYM 100 C4/9 WYM 150 C4/13WYM 200 C4/18 WYM 300 C4/27WYM 100 C5/7 WYM 150 C5/10WYM 200 C5/14 WYM 300 C5/21
--
WYM 075 D9/4 WYM 100 D9/5WYM 150 D9/7 WYM 200 D9/9WYM 300 D9/14
--
WYM 150 E15/4WYM 200 E15/6 WYM 300 E15/9
---
Three-phase380V 50Hz
WYT 050 A1/14WYT 075 A1/21 WYT 100 A1/28WYT 050 B2/7 WYT 075 B2/10WYT 100 B2/14 WYT 150 B2/21WYT 200 B2/28 WYT 300 B2/40WYT 050 C4/4 WYT 075 C4/6WYT 100 C4/9 WYT 150 C4/13WYT 200 C4/18 WYT 300 C4/27WYT 100 C5/7 WYT 150 C5/10WYT 200 C5/14 WYT 300 C5/21WYT 400 C5/28 WYT 550 C5/38WYT 075 D9/4 WYT 100 D9/5WYT 150 D9/7 WYT 200 D9/9WYT 300 D9/14 WYT 400 D9/19WYT 550 D9/26 WYT 150 E15/4WYT 200 E15/6 WYT 300 E15/9WYT 400 E15/12WYT 550 E15/16WYT 750 E15/22
0,370,550,750,370,550,751,11,52,20,370,550,751,11,52,20,751,11,52,23,04,00,550,751,11,52,23,04,01,11,52,23,04,05,5
16203016203040608016203040608030406080--
2030406080--
406080---
450450450450450450450450450450450450450450450450450450450
--
450450450450450
--
450450450
---
3,35,16
3,35,16
8,711,216,73,35,16
8,711,216,7
68,711,216,7
--
5,16
8,711,216,7
--
8,711,216,7
---
1,52,22,81,52,22,83,74,86,91,52,22,83,74,86,92,83,74,86,99,610,92,22,83,74,86,99,610,93,74,86,99,610,913,5
Pump type kW Absorbed Current (A)CapacitorµF Vc
380V1~
220V3~Single-phase
220V 50Hz
OYM 050 A1/14OYM 075 A1/21 OYM 100 A1/28OYM 050 B2/7 OYM 075 B2/10OYM 100 B2/14 OYM 150 B2/21OYM 200 B2/28 OYM 300 B2/40OYM 050 C4/4 OYM 075 C4/6OYM 100 C4/9 OYM 150 C4/13OYM 200 C4/18 OYM 300 C4/27OYM 100 C5/7 OYM 150 C5/10OYM 200 C5/14 OYM 300 C5/21
--
OYM 075 D9/4 OYM 100 D9/5OYM 150 D9/7 OYM 200 D9/9OYM 300 D9/14
--
OYM 150 E15/4OYM 200 E15/6 OYM 300 E15/9
---
Three-phase380V 50Hz
OYT 050 A1/14OYT 075 A1/21 OYT 100 A1/28OYT 050 B2/7 OYT 075 B2/10OYT 100 B2/14 OYT 150 B2/21OYT 200 B2/28 OYT 300 B2/40OYT 050 C4/4 OYT 075 C4/6OYT 100 C4/9 OYT 150 C4/13OYT 200 C4/18 OYT 300 C4/27OYT 100 C5/7 OYT 150 C5/10OYT 200 C5/14 OYT 300 C5/21OYT 400 C5/28 OYT 550 C5/38OYT 075 D9/4 OYT 100 D9/5OYT 150 D9/7 OYT 200 D9/9OYT 300 D9/14 OYT 400 D9/19OYT 550 D9/26 OYT 150 E15/4OYT 200 E15/6 OYT 300 E15/9OYT 400 E15/12OYT 550 E15/16OYT 750 E15/22
0,370,550,750,370,550,751,11,52,20,370,550,751,11,52,20,751,11,52,23,04,00,550,751,11,52,23,04,01,11,52,23,04,05,5
20253520253540608020253540608035406080--
2535406080--
406080---
450450450450450450450450450450450450450450450450450450450
--
450450450450450
--
450450450
---
3,24,45,63,24,45,67,710,815,13,24,45,67,710,815,15,67,710,815,1
--
4,45,67,710,815,1
--
7,710,815,1
---
1,41,82,51,41,82,53,34,46,11,41,82,53,34,46,12,53,34,46,18,8111,82,53,34,46,18,8113,34,46,18,811
14,4
4” BOREHOLE CENTRIFUGAL PUMPS
The pumps are manufactured to be coupled to NEMA standard motors. Improvements in design ofimpellers and diffusers lead to far better wear resistence, excluding the E15 series, offering the fol-lowing advantages:• axial thrust load on the motor shaft is drastically reduced leading to increased average life of the
motor.• Impeller outer diameter is wider than the usual one; so that similar performance are given by a
reduced number of stage.• a small quality of solids in the water is acceptable.The built-in non-return valve in easy to remove and to inspect.The components are over sized to facilitate the use of the pumps in even the most heavy conditions.
TECHNICAL DATA
101
WINNER4” BOREHOLE CENTRIFUGAL PUMPS
DIMENSIONAL TABLEPump type
WINNERDimensions (mm)
A1/14A1/21 A1/28B2/7 B2/10B2/14 B2/21B2/28 B2/40C4/4 C4/6C4/9 C4/13C4/18 C4/27C5/7 C5/10C5/14 C5/21C5/28 C5/38D9/4 D9/5D9/7 D9/9D9/14 D9/19D9/26 E15/4E15/6 E15/9E15/12E15/16E15/22
588,5736941401473
568,5736941
1228337,5389,5467
570,5700971
513,56337931110
1389,51788,5417,5463,5555647
876,51144
1465,5539730
997,5126515712068
9101082,51322,5722,5819,5950
1152,51407,51804,5
659736
848,5987
1166,51547,5
8951049,51259,51686,5
--
764845
971,51113,51453
--
955,51196,51574
---
8601032,51272,5672,5769,5900
1102,51357,51704,5
609686
798,5937
1116,51447,5
845999,5
1209,51586,5
--
714795
921,51063,51353
--
905,51146,51474
---
8451007,51237,5657,5744,5865
1067,51307,51644,5
594661
763,5902
1066,51387,5
810964,51159,51526,518912360689760
886,51013,51293
1645,52037870,5
1069,51414
1766,52142,52749,5
9101057,51287,5722,5794,5915
1117,51357,51694,5
659711
813,5952
1116,51437,5
8601014,51209,51576,519662435739810
936,51063,51343
1720,52112920,51146,51464
1841,52217,52842,5
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G2G2G2G2G2G2G2G2G2G2G2G2G2
12,915,820,311,213,216,119,624,630,210,312,114,817,521,226,214,317
20,524,2
--
12,214,317
20,524,7
--
1721,327,2
---
12,314,718,710,612,114,518
22,428,29,711
13,215,919
24,212,715,418,322,229,936,911,112,715,418,322,730
36,415,419,125,234
38,948
13,916,721,212,214,117
20,225,231,511,313
15,718,121,827,515,217,621,125,5
--
13,115,217,621,126--
17,621,928,5
---
13,315,719,611,613,115,418,823
28,810,712
14,116,719,624,813,616,218,922,830,937,512,113,616,218,923,33137
16,219,725,835
39,548,6
H OYM OYT WYM WYT DNM OYM OYT WYM WYTH1 Weight kg
102
WINNER
PERFORMANCE CURVES (according to ISO 9906 Annex A)
4” BOREHOLE CENTRIFUGAL PUMPS
A1 B2
C4 C5
103
WINNER4” BOREHOLE CENTRIFUGAL PUMPS
PERFORMANCE CURVES (according to ISO 9906 Annex A)
kW
0,370,550,750,370,550,751,11,52,2
0,370,550,751,11,52,2
0,751,11,52,23,04,0
0,550,751,11,52,23,04,01,11,52,23,04,05,5
Pump typeWinnerWY - OY
Q=Capacity
050 A1/14075 A1/21 100 A1/28050 B2/7 075 B2/10100 B2/14150 B2/21200 B2/28 300 B2/40050 C4/4 075 C4/6100 C4/9 150 C4/13200 C4/18 300 C4/27100 C5/7 150 C5/10200 C5/14 300 C5/21400 C5/28 550 C5/38075 D9/4 100 D9/5150 D9/7200 D9/9300 D9/14 400 D9/19550 D9/26 150 E15/4200 E15/6 300 E15/9400 E15/12 550 E15/16750 E15/22
6293
127436287
130174250
58,487,4
120,540,758,982,9
124,3166,7240,8
53,680,3112,137,955
77,7116,9157,6229,3
27405986118177
47,771,6101,6
40,560,988,530,844,963,997,2132,6197,725,838,557
82,8112,7170,9
405780
120159215
324872
---
21,531,742,569,396,3149,224,136,353,978,6106,4162,538,556,178,1116,5155
209,72530425584114154
---
101521314260-------------------
2233506789122
---------
19,429,944,565,887,513135,851,671,8107,4143,6194,623,728,940,952,180,5108,8147,6
---------
12,720,530,246
59,488,831,846,262,994,5127
173,122,127,238,249,176
102,4139,4
---------4810162030
26,837,851,376,8104,3143,920,125,135
45,170,194,4129,119,730,246,162,783,4114,3
---------------
152028445779
16,320,728,736,957,577,8107,1
---------------------
17,226,941,156,875,9104,3
---------------------
11,614,920,726,440,956
76,9
---------------------671114222938
----------------------------
14,322,935,149,266,391,9
----------------------------
11,218,228
39,95476
----------------------------
7,713
19,728,338,555,4
----------------------------4710141826
l/minm3/h
100,6
150,9
201,2
251,5
301,8
352,1
402,4
503
603,6
804,8
1006
1307,8
1509
1609,6
19011,4
20012
25015
30018
35021
H=Total head
PERFORMANCE TABLE
D9 E15
105
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
SPECIFICATIONS• Maximum immersion: 100 m • Maximum liquid temperature: 30°C • Maximum sand content: 50 ppm
MATERIALS• Bracket, suction and discharge ports, coupling, impeller,
diffuser, diffuser cover, valve, tie-rod and cable guard in AISI 304
• Liner ring in tecnopolymer/AISI 304• Shaft in AISI 316
TECHNICAL DATAPumps can be requested to be coupled with the followingmotor versions:
• Pump O4BHS with motor OY in coolant liquid bath (maxliquid temperature 40°C)
• Pump W4BHS with motor WY in water bath (max liquidtemperature 30°C)
Both types of motor have the following features:• 2 poles motor, water filled (WY version)
or oil fillled (OY version) • Maximum startings/hour: 30 • Insulation class F• Protection degree IP58 • 1~220V ± 6% 50Hz, 3~380V ± 6% 50Hz
4" borehole multistage pump entirely made of stainless steel AISI 304. The smooth surface of theimpellers and diffusers offer an improved efficiency, and reliability factor. Applications include cleanwater extraction from boreholes, pressure boosting for domestic, farming and industrial applications.Installation can be horizontal as well as vertical. The 4BHS can be fitted to any NEMA standard motor.
106
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
kW
0,550,751,11,52,22,20,550,751,11,52,22,23,04,00,751,11,52,22,23,04,01,52,23,04,05,5
Pump type4BHS
Q=Capacity
4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55
6590143186227275
--------------------
5271114145
178,7222,8
375379105126154189253
------------
41589211614118136
52,576102122150178
241,1------------
29,54164809712534487296115
141,5170227
------------
------
31,545
66,589106132
156,521028
38,5546577100125
-----
------
18,5263950617685
109,425
35,549,5597090114
-----
--------------
2332,5455464
82,510430
43,55572108
--------------
13,52027334151642738
47,56395
---------------------
18,528,536,145
68,2
---------------------
1217,5252944
l/minm3/h
130,8
301,8
402,4
503,0
603,6
1006
1207,2
18010,8
25015
30018
H=Total head
Pump type kW Absorbed Current (A)
Three-phase380V
Three-phase380V 50Hz
4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55
0,550,751,11,52,22,20,550,751,11,52,22,23,04,00,751,11,52,22,23,04,01,52,23,04,05,5
2,02,53,44,56,16,12,02,53,44,56,16,18,110,62,53,44,56,16,18,110,64,56,18,110,614,5
1,752,43,44,46,06,01,752,43,44,46,06,08,510,82,43,44,46,06,08,510,84,46,08,510,814,5
W O
Pump type kW Absorbed Current (A)CapacitorµF Vc Single-phase
220V
PERFORMANCE TABLE
Single-phase220V 50Hz
4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M
--
4BHS7 5/7M 4BHS7 7/11M4BHS7 10/15M4BHS7 12/22M4BHS7 14/22M
--
4BHS15 7/15M4BHS15 10/22M
---
0,550,751,11,52,22,20,550,751,11,52,22,2--
0,751,11,52,22,2--
1,52,2---
203040608080203040608080--
3040608080--
6080---
253540608080253540608080--
3540608080--
6080---
450450450450450450450450450450450450
--
450450450450450
--
450450
---
4,95,69,111,215,815,84,95,69,111,215,815,8
--
5,69,111,215,815,8
--
11,215,8
---
4,55,87,810,614,914,94,55,87,810,614,914,9
--
5,87,810,614,914,9
--
10,614,9
---
WW O O
107
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CHART (according to ISO 9906 Annex A)
108
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES 4BHS 2 series (according to ISO 9906 Annex A)
109
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES 4BHS 4 series (according to ISO 9906 Annex A)
110
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES 4BHS 7 series (according to ISO 9906 Annex A)
111
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES 4BHS 15 series (according to ISO 9906 Annex A)
112
TIPO TIPO
4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
Pump typemotore W
Dimensions (mm)
Single-phase4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M
--
4BHS7 5/7M 4BHS7 7/11M4BHS7 10/15M4BHS7 12/22M4BHS7 14/22M
--
4BHS15 7/15M4BHS15 10/22M
---
Three-phase4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55
1~773,5929,51152,51413,51677,51824,5647,5740,5879,51056,51215,51341,5
--
746,5843,5989
1158,51221,5
--
978,51221,5
---
3~753,5899,51118,51362,51602,51749,5627,5710,5845,51005,51140,51266,515181831716,5809,5938
1083,51146,513771606927,51146,5137716272125
1~14,518,222,927,532,935,713
15,819,523,127,629,2
--
14,51720
23,424,2
--
19,123,2
---
3~13,816,820,624,930,333,112,314,417,220,525
26,632,841,413,114,717,420,821,626,833
16,520,625,531,740,2
solo pompa6
8,211,113,816,519,34,55,87,79,411,212,815,520,24,55,26,37
7,89,511,85,46,88,2
10,514
Weight kgH
480,5606,5795,51005,51194,51341,5354,5417,5522,5648,5732,5858,51005,51278,5423,5486,5581
675,5738,5864,51053,5570,5738,5864,51074,51452,5
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G2G2G2G2G2G2G2G2G2G2G2G2
H1 DNM
DIMENSIONAL TABLEPump type
motore ODimensions (mm)
Single-phase4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M
--
4BHS7 5/7M 4BHS7 7/11M4BHS7 10/15M4BHS7 12/22M4BHS7 14/22M
--
4BHS15 7/15M4BHS15 10/22M
---
Three-phase4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55
1~8029531177142217111858676764904
106512491375
--
770868
997,511921255
--
9871255
---
3~802928114213871661180867673986910301199132515821855745833
962,511421205144116309521205144116512099
1~13,616,921,425,832
34,812,114,518
21,426,728,3
--
13,215,518,322,523,3
--
17,422,3
---
3~13
15,819,824,230,733,511,513,416,419,825,42737
42,212,113,916,721,22231
33,815,821
29,732,536,4
solo pompa6
8,211,113,816,519,34,55,87,79,411,212,815,520,24,55,26,37
7,89,511,85,46,88,210,514
Weight kgH
480,5606,5795,51005,51194,51341,5354,5417,5522,5648,5732,5858,51005,51278,5423,5486,5581
675,5738,5864,51053,5570,5738,5864,51074,51452,5
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/4
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G1 1/2
G2G2G2G2G2G2G2G2G2G2G2G2
H1 DNM
SELECTION OF THE POWER CABLE
Example : Motor 1.1 kW - 220 V single phase - cable length 39 m. - 4x2.5 mm≤
Motor kW HP Cable type and length maximum limit
4x1 4x1.5 4x2.5 4x4 4x6 4x10 4x16Single phase 0.37 0.5 50 75 125 - - - -230 V - 50 Hz 0.55 0.75 38 57 95 152 - - -
0.75 1 30 45 75 120 174 - -1.1 1.5 22 33 53 85 127 210 -1.5 2 - 23 38 63 92 154 2462.2 3 - - 28 45 67 112 180
Three phase 0.55 0.75 164 246 - - - - -400 V - 50 Hz 0.75 1 133 200 333 - - - -
1.1 1.5 97 146 244 390 - - -1.5 2 72 109 180 290 435 - -2.2 3 51 78 130 207 310 516 -3 4 41 62 104 167 250 416 -
3.7 5.5 31 46 77 124 186 310 4965.5 7.5 33 56 90 135 225 360
Three phase 0.55 0.75 60 90 150 240 - - -230 V - 50 Hz 0.75 1 47 71 118 190 - - -
1.1 1.5 35 52 87 140 210 - -1.5 2 26 40 66 106 160 266 -2.2 3 - 29 48 76 115 191 3063 4 - - 37 60 90 150 240
3.7 5.5 - - 27 44 66 110 1765.5 7.5 - - - 32 48 80
128
113
IDROGO5” SUBMERSIBLE CENTRIFUGAL MULTISTAGE PUMPS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
• Installation: in horizontal and vertical position • Maximum immersion: 20 m
(10 m with float switch)
MATERIALS• External casing, motor casing, casing cover
and closing ring in AISI 304 • Impeller, diffuser and spacer in tecnopolymer• Shaft in AISI 416• Upper mechanical seal in carbon/ceramic/NBR, lower mechanical seal in SiC/Carbon/NBR
TECHNICAL DATA• Asincronous 2 poles motor cooled by the pumped liquid• Insulation class F• Protection degree IP68 • 1~230V +- 10% 50Hz, 3~400V +-10% 50Hz • Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM 1”1/4
5" submersible centrifugal multistage pump made of stainless steel AISI 304 and noryl, suitable forthe movement of clean water from wells, tanks for irrigation systems. The double mechanical sealensures long life and improved reliability. There is no need for a starter box as the capacitors areinstalled in the pumping unit allowing a neater installation.
DIMENSIONAL TABLE
Pump type (mm)
Single-phaseIDROGO M 40/06*IDROGO M 40/08IDROGO M 40/10IDROGO M 40/12IDROGO M 40/15IDROGO M 80/12IDROGO M 80/15
-
Three-phase-
IDROGO 40/08IDROGO 40/10IDROGO 40/12IDROGO 40/15IDROGO 80/12IDROGO 80/15IDROGO 80/20
513513539590616540564590
1~
1315161718161718
3~
1315161718161718
Weight
H kg
* Supplied with 5 m cable lenght type HØ7RN-F
114
IDROGO5” SUBMERSIBLE CENTRIFUGAL MULTISTAGE PUMPS
Pump type kW Capacitor Absorbed Current (A) Q=Capacity
Single-phase230V 50Hz
IDROGO M 40/06IDROGO M 40/08IDROGO M 40/10IDROGO M 40/12IDROGO M 40/15IDROGO M 80/12IDROGO M 80/15
-
µF VcThree-phase400V 50Hz
-IDROGO 40/08IDROGO 40/10IDROGO 40/12IDROGO 40/15IDROGO 80/12IDROGO 80/15IDROGO 80/20
0,450,6
0,750,91,10,91,11,5
3,84,35,76,87,36,47,5-
-1,92,22,43,02,33,13,5
33,143,354,164,975,7
---
30,840,250,260,270,345,657
68,4
27,836,345,454,563,6445566
2026,132,639,245,738,848,558,2
10,313,416,820,223,5324048
-----
23,228
34,8
-----
15,219
22,8
16162020
31,520
31,5-
450450450450450450450
-
400V1~ 3~ l/min
m3/h201,2
301,8
402,4
603,6
804,8
1006
1207,2
H=Total head
PERFORMANCE TABLE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
115
SF66” BOREHOLE CENTRIFUGAL PUMPS
SPECIFICATIONS• Maximum liquid temperature: 30°C• Maximum sand content: 40 ppm
MATERIALS• Discharge and suction made of spheroidal nickeled
cast iron.• Pump casing, spacer rings for stage, wearing rings
check valve, cable guard and suction filter in AISI 304.• Impellers and diffusers in noryl.• Shaft in AISI 420
TECHNICAL DATA• 2 poles motor • Outlet: 2”1/2 SF6R10/13 and SF6S25 series
3” SF6S32/42 series
6” submersible pumps for water supply of domestic, agricultural and industrial use, pressure boost-ing units and irrigation systems.For more details, please call our Sale Dept.
116
Weightkg
SF66” BOREHOLE CENTRIFUGAL PUMPS
Pump typeSF6
Q=Capacity
R10-5/2.2R10-6/3R10-7/3R10-8/4R10-9/4R10-12/5.5R10-15/7.5R10-18/9.2R10-21/9.2R13-4/2.2R13-5/3R13-6/4R13-7/5.5R13-8/5.5R13-9/5.5R13-12/7.5R13-15/9.2R13-18/11R13-21/13R13-24/15S25-3/3S25-4/4S25-6/5.5S25-8/7.5S25-10/9.2S25-12/11S25-14/15S25-16/15S25-20/18.5S25-24/22S32-2/3S32-3/4S32-4/5.5S32-5/7.5S32-6/9.2S32-8/11S32-9/15S32-10/15S32-12/18.5S32-15/22S32-18/26S32-20/30S42-2/4S42-3/5.5S42-4/7.5S42-5/9.2S42-6/11S42-8/13S42-9/15S42-10/18.5S42-12/22S42-15/26S42-18/30
799511112614219023728433262789310912414018623327932637246619212215318423024530636732496581971301461621952432923242639526578104117130156195234
688195108122162203243284607590105120135180225270315360
---------------------------------
45546372811081351621894962748698111148185221258295405380106133159199212265318
-----------------------
2631364247627894109405060708090120150180210240385076101126151189202252302
-----------------------
---------
28354249566384105126147168354770941171401761872342812943577186114129143171214257286
-----------
--------------------
2938587796115144154192230263952657810411813115719623526122324354658697108130162194
--------------------
1621314252627883104125203141516182921021221531842041828374655748392110138166
------------------------------
13192632395158647796116129152330384661687691114137
------------------------------------------
12182430364854607290108
------------------------------------------812151923313539465869
l/minm3/h
00
1006
20012
25015
30018
40024
55033
70042
85051
100060
H=Total head
Lengthmm.
583621659697735848962107611905455836216596977358489621076119013045646217358489621076110
1304158418105135736326927528729329921112129215241644513573632692752872932992111212921524
11,512
12,513141618202211
11,512
12,5131416182022241112
13,516
17,519,52123
27,53110
10,511,513
14,515,516,517,519,522262810
10,51213
14,515,516,517,519,52226
117117
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
6" deep-well pumps entirely made of stainless steel AISI 304. The smooth surface of the impellersand diffusers offer an improved efficiency, and reliability factor. Applications include clean waterextraction from boreholes, pressure boosting for domestic, farming and industrial applications.Installation can be horizontal as well as vertical. The 6BHS can be fitted to any NEMA standard motor.
SPECIFICATIONS• Maximum immersion: 100 m (oil motor)
350 m (water motor) • Maximum liquid temperature: 30°C
MATERIALS• Bracket, suction and discharge ports, coupling, impeller,
diffuser, diffuser cover, valve, tie-rod and cable guard in AISI 304
• Liner ring in EPDM/AISI 304• Shaft in AISI 316
TECHNICAL DATA• 2 poles motor, water filled (W version)
or oil fillled (O version) • Maximum startings/hour: 25 (O version)
20 (W version) • Insulation class F• Protection degree IP58 • 3~ 380/400V (O version)
400V, +6% -10%, 50 Hz (W version)
118118
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES (according to ISO 9906 Annex A)
119
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE TABLEPump type Motor kW HP Q = Capacity
6BHS size l/min. 70 100 150 200 250 300 375 450 500m3/h 4,20 6,0 9,0 12,0 15,0 18,0 22,5 27,0 30,0
H = Total head
64BHS8 5 4” 1,5 2 54 49,5 39 22,5 - - - - -64BHS8 7 4” 2,2 3 75,5 69,5 54,5 31,5 - - - - -64BHS8 10 4” 3 4 108 99 77,5 45 - - - - -64BHS8 13 4” 4 5,5 140 129 101 58,5 - - - - -6BHS8 13 6” 4 5,5 140 129 101 58,5 - - - - -64BHS8 15 4” 5,5 7,5 162 149 116 67,5 - - - - -6BHS8 15 6” 5,5 7,5 162 149 116 67,5 - - - - -64BHS8 18 4” 5,5 7,5 194 178 140 81 - - - - -6BHS8 18 6” 5,5 7,5 194 178 140 81 - - - - -6BHS8 21 6” 7,5 10 227 208 163 94,5 - - - - -6BHS8 25 6” 7,5 10 270 248 194 113 - - - - -6BHS8 29 6” 9,2 12,5 313 287 225 131 - - - - -6BHS8 34 6” 11 15 367 337 264 153 - - - - -64BHS14 3 4” 1,5 2 - 29,5 27 23 18 11,5 - - -64BHS14 5 4” 2,2 3 - 49 45 38,5 30 19 - - -64BHS14 7 4” 3 4 - 68,5 63 54 42 26,5 - - -64BHS14 9 4” 4 5,5 - 88 81 69,5 54 34 - - -6BHS14 9 6” 4 5,5 - 88 81 69,5 54 34 - - -64BHS14 13 4” 5,5 7,5 - 127 117 100 78 49 - - -6BHS14 13 6” 5,5 7,5 - 127 117 100 78 49 - - -6BHS14 15 6” 7,5 10 - 147 135 116 90 56,5 - - -6BHS14 18 6” 7,5 10 - 176 162 139 108 68 - - -6BHS14 22 6” 9,2 12,5 - 216 198 170 132 83 - - -6BHS14 26 6” 11 15 - 255 234 201 156 98 - - -6BHS14 31 6” 15 20 - 304 279 239 185 117 - - -6BHS14 35 6” 15 20 - 343 315 270 209 132 - - -64BHS21 4 4” 3 4 - - 36,5 35,5 34 32 27,5 21 16,564BHS21 6 4” 4 5,5 - - 55 53 51 48 41,5 32 24,56BHS21 6 6” 4 5,5 - - 55 53 51 48 41,5 32 24,564BHS21 8 4” 5,5 7,5 - - 73,5 71 67,5 64 55 42 336BHS21 8 6” 5,5 7,5 - - 73,5 71 67,5 64 55 42 336BHS21 12 6” 7,5 10 - - 110 106 102 96 83 64 496BHS21 14 6” 9,2 12,5 - - 128 124 118 112 96 74 57,56BHS21 17 6” 11 15 - - 156 150 144 136 117 90 69,56BHS21 22 6” 15 20 - - 202 194 186 176 151 117 906BHS21 25 6” 15 20 - - 229 221 212 200 172 133 1036BHS21 29 6” 18,5 25 - - 266 256 245 232 200 154 1196BHS21 34 6” 22 30 - - 312 300 288 272 234 180 1396BHS21 36 6” 22 30 - - 330 318 305 288 248 191 148
120
PERFORMANCE CURVES 6BHS8 series (according to ISO 9906 Annex A)
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
121
PERFORMANCE CURVES 6BHS14 series (according to ISO 9906 Annex A)
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
122
PERFORMANCE CURVES 6BHS21 series (according to ISO 9906 Annex A)
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
123
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
124
Pump typePump type Motor sizeMotor size
kW HP DNM H1Weight
[ kgf ]H
Weight
[ kgf ]H
Weight
[ kgf ]
64BHS8-5/15 1,5 2 G 2 454,5 12,5 779 24,5 837 23
64BHS8-7/22 2,2 3 G 2 514,5 14,5 868 27,5 932 26,5
64BHS8-10/30 3 4 G 2 604,5 17 1025 34 1182 39,5
64BHS8-13/40 4 5,5 G 2 694,5 20 1275 43,7 1272 42,5
64BHS8-15/55 5,5 7,5 G 2 754,5 21,5 1450 51 1402 45
64BHS8-18/55 5,5 7,5 G 2 844,5 24 1540 53,5 1492 47,5
6BHS8-13/40 4 5,5 G 2 729 21 1311 59 1269 61
6BHS8-15/55 5,5 7,5 G 2 789 24 1404 64,5 1359 65
6BHS8-18/55 5,5 7,5 G 2 879 26,5 1494 66 1449 67,5
6BHS8-21/75 7,5 10 G 2 969 29,5 1616 73,5 1569 72
6BHS8-25/75 7,5 10 G 2 1089 33,5 1736 79 1689 77,5
6BHS8-29/92 9,2 12,5 G 2 1209 38,5 1888 85 1809 84
6BHS8-34/110 11 15 G 2 1359 45 2071 93 2059 91,5
64BHS14-3/15 1,5 2 G 2 1/2 394,5 10,5 719 22,5 777 21
64BHS14-5/22 2,2 3 G 2 1/2 454,5 12 808 25,5 872 24,5
64BHS14-7/30 3 4 G 2 1/2 514,5 14 935 30,5 1092 35,5
64BHS14-9/40 4 5,5 G 2 1/2 574,5 15,5 1155 40 1152 39
64BHS14-13/55 5,5 7,5 G 2 1/2 694,5 19 1390 49 1342 43
6BHS14-9/40 4 5,5 G 2 1/2 609 17 1191 54 1149 56,5
6BHS14-13/55 5,5 7,5 G 2 1/2 729 21 1344 62 1299 63
6BHS14-15/75 7,5 10 G 2 1/2 789 23 1436 68 1389 66,5
6BHS14-18/75 7,5 10 G 2 1/2 879 25,5 1526 70,5 1479 69
6BHS14-22/92 9,2 12,5 G 2 1/2 999 29,5 1678 76 1599 75,5
6BHS14-26/110 11 15 G 2 1/2 1119 33,5 1831 85 1819 84
6BHS14-31/150 15 20 G 2 1/2 1269 40,5 2046 96 2029 94,5
6BHS14-35/150 15 20 G 2 1/2 1389 44 2166 99 2149 97,5
64BHS21-4/30 3 4 G 2 1/2 474,5 11,5 895 28,5 1052 33,5
64BHS21-6/40 4 5,5 G 2 1/2 554,5 13,5 1135 38,5 1132 37
64BHS21-8/55 5,5 7,5 G 2 1/2 634,5 15,5 1330 45,5 1282 39,5
6BHS21-6/40 4 5,5 G 2 1/2 589 15 1171 52,3 1129 54,7
6BHS21-8/55 5,5 7,5 G 2 1/2 669 17 1284 58 1239 59
6BHS21-12/75 7,5 10 G 2 1/2 829 21,5 1476 67 1429 66
6BHS21-14/92 9,2 12,5 G 2 1/2 909 24 1588 72 1509 71
6BHS21-17/110 11 15 G 2 1/2 1029 26,5 1741 78 1729 77
6BHS21-22/150 15 20 G 2 1/2 1229 34,5 2006 89 1989 90
6BHS21-25/150 15 20 G 2 1/2 1349 38 2126 94 2109 93
6BHS21-29/185 18,5 25 G 2 1/2 1509 42,5 2351 104 2339 108
6BHS21-34/220 22 30 G 2 1/2 1709 48,5 2616 116 2599 119
6BHS21-36/220 22 30 G 2 1/2 1789 51 2696 118 2679 121
4"
6"
Pump without motorPump without motor
6"
4"
4 "
PowerPower Pump with water motor filledPump with water motor filled Pump with oil motor filledPump with oil motor filled
6"
DIMENSIONAL TABLE
6BHS6” BOREHOLE CENTRIFUGAL PUMPS in AISI 304
125
Submersible pumps for clear and sump water suitable for domestic applications, drainage of floodedrooms, garden fountains, small irrigation and movement of rain water.
KIKASUBMERSIBLE PUMPS FOR CLEAR AND SUMP WATER
DN A B C D E F kg
KIKA 1” 240 370 165 220 185 270 3,7
SPECIFICATIONS• Maximum immersion depth: 4mts. • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
MATERIALS• Pump casing, strainer and impeller made in tecnopolymer• Shaft in stainless steel• Mechanical seal in carbon/ceramic
TECHNICAL DATA• Asincronous 2 poles motor 230V 50Hz• 1~230V +- 10% 50Hz, 3~400V +-10% 50Hz • Permanent split capacitor and automatic thermal
overload protection• Outlet: 1” suitable also for flexible pipe connection
Q = CapacityPump type INPUT W Capacitor INPUT L/min. 0 10 20 30 40 50 60 70 80 90
µF VcCurrent m3/h 0 0,6 1,2 1,8 2,4 3 3,6 4,2 4,8 5,4
(W) H = Total head
KIKA 230 8 450 1 A 6,4 5,7 5,2 4,7 4,2 3,7 3,2 2,8 2,3 1,8
PERFORMANCE TABLE
PERFORMANCE CURVE (according to UNI 9906 Annex A)
126
BEST ZEROSUBMERSIBLE SUMP PUMPS in AISI 304
SPECIFICATIONS • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 40°C for other uses
• Maximum immersion: 5 m • Maximum passage of solids: 10 mm
MATERIALS• Pump casing, strainer, cover and motor casing in AISI 304 • Impeller, diffuser and spacer in tecnopolymer• Shaft in AISI 303• Grease lubrificated double lip seal
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz • DNM 1”1/4
Submersible sump pumps suitable for draining garages, cellars and other places subjected to flood-ing and for garden ponds and small water displays. They can be applied for portable and fixed instal-lations. Supplied with 5 m cable lenght type H05 RN-F and available with or without float switch. (10 m cable H05 RN-F on request)
0,95
kg4,44,24,4
Weight
8 450
127
BEST ZERO
Pump type kW Capacitor Abs. Curr. (A) Q=Capacity
µF VcSingle-phase230 V
BEST ZERO M
Three-phase400 V
BEST ZERO 0,25 1,9 7 6,3 5,4 4,3 3,1 1,5
Single-phase
Three-phase
l/minm3/h
201,2
503
754,5
1006
1257,5
1509
H=Total head
Pump type
BEST ZERO MABEST ZERO MBEST ZERO
PERFORMANCE CURVE (according to ISO 9906 Annex A)
PERFORMANCE TABLE
SUBMERSIBLE SUMP PUMPS in AISI 304
MA = only for single-phasewith float switch
128
BEST ONESUBMERSIBLE SUMP PUMPS in AISI 304
SPECIFICATIONS• Maximum liquid temperature: 35°C according EN 60335-2-41 for domestic uses 40°C for other uses
• Maximum immersion: 5 m • Maximum passage of solids: 10 mm
20 mm per VOX version
MATERIALS• Pump casing, impeller strainer, cover,
casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double lip seal with interposed oil chamber
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz • DNM 1” 1/4
Submersible drainage sump pump made of stainless steel AISI 304, shaft sealing is with double lipseals that run on a ceramic-coated shaft. Suitable for draining wells, plant room sumps, and liftshafts, emptying, pools, sumps, small-scale irrigation and small water displays and pub cellars.Options include with - without float switch - VOX versions and 110 - 230 - 400V versions.(10 m cable H05 RN-F on request)
DIMENSIONAL TABLE
Pump type (mm)
BEST ONEBEST ONE VOX
260285
220245
H H1
1020
S
450450
88
129
BEST ONE
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Abs. Current (A) Q=Capacity
µF VcSingle-phase230V
BEST ONE MBEST ONE VOX M
Three-phase400V
BEST ONEBEST ONE VOX
0,250,25
2,22,0
1,11,0
8,36
7,85,6
6,34,8
4,53,5
2,42
1,81,5
Single-phase
Three-phase
l/minm3/h
201,2
402,4
804,8
1207,2
1609,6
17010,2
H=Total head
SUBMERSIBLE SUMP PUMPS in AISI 304
PERFORMANCE TABLE
130
BEST 2-3-4-5SUBMERSIBLE SUMP PUMPS in AISI 304
SPECIFICATIONS • Maximum liquid temperature:
35°C according EN 60335-2-41 for domestic uses 50°C for other uses
• Maximum immersion: 10 m • Maximum passage of solids: 10 mm
MATERIALS• Pump casing, impeller, strainer, cover,
casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed oil chamber
upper in carbon-caramic/NBR - lower in SiC/SiC/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz - 3~400V ± 10%, 50Hz• Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM 1”1/2
Submersible sump pump made of stainless steel AISI 304, double mechanical seals ensure long lifeand reliability. Suitable for draining wells, plant room sump, lift shaft emptying, pools, sumps, irriga-tion, and water displays. Options include with - without float switch. Solids handling up to 10 mm
DIMENSIONAL TABLE
Pump type (mm)
BEST 2BEST 3BEST 4BEST 5
352352377377
315315340340
1212,713813,5
Weight
H H1 kg
131
BEST 2-3-4-5SUBMERSIBLE SUMP PUMPS in AISI 304
PERFORMANCE CURVES (according to ISO 9906 Annex A)
Pump type kW Capacitor Absorbed Current (A) Q=Capacity
Single-phase230V 50Hz
BEST 2 MBEST 3 MBEST 4 M
-
µF VcThree-phase400V 50Hz
BEST 2 BEST 3 BEST 4 BEST 5
0,550,751,11,5
4,45,67,3-
2,02,43,03,3
12,213,617,418,4
9,811,115
16,1
8,39,513,414,5
6,37,611,312,5
2,94
7,59
-3,26,78
--
4,66
---5
1620
31,5-
450450450
-
1~ 3~ l/minm3/h
201,2
804,8
1207,2
17010,2
26015,6
28016,8
33019,8
36021,6
H=Total head
PERFORMANCE TABLE
132
RIGHTSUBMERSIBLE PUMPS for dirty water
SPECIFICATIONS• Maximum liquid temperature: 50°C • Maximum immersion: 10 m • Maximum passage of solids: 35 mm
MATERIALS• Pump casing, impeller, cover,
casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed
oil chamber: upper in carbon/ceramic/NBR, lower in Sic/SiC/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz - 3~400V ± 10%, 50Hz• Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNM 1”1/2
Submersible dirty water pump made of stainless steel AISI 304, double mechanical seals ensure longlife and reliability. Suitable for dirty water systems with some solids. Applications include wastewatertreatment plants and final effluent pumping, irrigation, and water displays. Options include with -without float switch. Solids handling up to 35 mm.
DIMENSIONAL TABLEPump type (mm)
RIGHT 75RIGHT 100
405430
480500
1011,5
Weight
H H2 kg
133
RIGHT
Pump type kW Capacitor Absorbed Current(A) Q=Capacity
Single-phase230V 50Hz
RIGHT 75 MRIGHT 100 M
µF VcThree-phase400V 50Hz
RIGHT 75 RIGHT 100
0,550,75
4,85,7
2,12,6
7,89,5
6,88,6
6,28,1
5,77,6
4,76,6
3,45,4
24,2
-2
2031,5
450450
1~ 3~ l/minm3/h
402,4
804,8
1006
1207,2
1609,6
20012
24014,4
30018
H=Total head
PERFORMANCE CURVES (according to ISO 9906 Annex A)
PERFORMANCE TABLE
SUBMERSIBLE PUMPS for dirty water
134
DW - DW VOXSUBMERSIBLE PUMPS for dirty water
SPECIFICATIONS • Maximum liquid temperature: 40°C • Maximum immersion: 10 m • Maximum passage of solids: 50 mm
MATERIALS• Pump casing, impeller, cover, casing cover
and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed oil chamber:
upper in carbon/ceramic/NBR, lower in Sic/SiC/NBR
TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ±10% 50Hz - 3~400V ± 10% 50Hz• Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • DNA 50-DNM 2”• DNM 50PN10 (F version)
Submersible sewage pump made of stainless steel AISI 304, with double mechanical seals ensurelong life and reliability. Suitable for sewage and dirty water systems with solids. Applications includeremote sewage stations for housing developments, pubs, hotels and restaurants, and water displays.Options include with - without float switch. Solids handling up to 50 mm.
DIMENSIONAL TABLE
Pump type WeightDimensions (mm)
485515515515545
DW 75DW 100DW 150DW 200DW 300
1618202026
H kg
Weight
kg
Pump type Dimensions (mm)
DW VOX 75DW VOX 100DW VOX 150DW VOX 200DW VOX 300
485515515515545
H
1618202026
135
DW - DW VOX
PERFORMANCE CURVES (according to ISO 9906 Annex A)
SUBMERSIBLE PUMPS for dirty water
Pump type kW Capacitor Absorbed Current (A) Q=Capacity
µF Vc400V
1~ 3~l/minm3/h
1006
20012
30018
40024
50030
60036
70042
80048
90054
H=Total head
Three-phase400V 50Hz
DW 75 DW 100 DW 150 DW 200DW 300 DW VOX 75 DW VOX 100 DW VOX 150 DW VOX 200DW VOX 300
Single-phase230V 50Hz
DW 75 MDW 100 MDW 150 M
--
DW VOX 75 MDW VOX 100 MDW VOX 150 M
--
0,550,751,11,52,2
0,550,751,11,52,2
2025
31,5--
2025
31,5--
450450450
--
450450450
--
3,95,97,3--
3,95,87,3--
1,52,12,83,65,01,42,12,83,34,4
810,613,116,6206,37,910,212,515,7
6,38,711,315
18,35
6,79
11,214,7
4,87,19,513,316,63,55,37,69,813,9
3,45,57,711,415,11,63,76,18,312,6
2,24
5,99,513,3
-1,94,16,410,7
-2,64,27,511,3
--
2,14,28,4
--
2,45,49,3---
1,66,1
---
3,37,2----
3,6
---5------
PERFORMANCE TABLE
DWDW VOX
DWFDW VOX F
DW FZDW VOX FZ
DWDW VOX
136
DMLSUBMERSIBLE PUMPS for dirty water
SPECIFICATIONS• Maximum water temperature: 40°C• Maximum passage of solids: 76 mm
MATERIALS• Pump casing, impeller and elbow: cast iron• Shaft in AISI 403• Mechanical seal:
- SiC/SiC/NBR (pump side)- Carbon/Ceramic/NBR (motor side)
TECHNICAL DATA• 4 poles motor• Insulation class F• protection degree IP68• 3~ 400V, 50 Hz• DN80, DN100, DN150 flanges• Power up to 22 kW
Submersible sewage pumps made of cast iron, suitable for sewage and dirty water systems withsolids, waste water, removal of treated liquid waste and tank emptying and general dirty water duties.(Kit discharge connector on request)
137
DMLSUBMERSIBLE PUMPS for dirty water
PERFORMANCE CURVES 80DML (according to ISO 9906 Annex A)
Pump type Q=Capacity
DML kW HPl/min 0 200 400 600 800 1000 1200 1400 1600m3/h 0 12 24 36 48 60 72 84 96
H=total head [m]
80DML52.2 2.2 3 13.1 11.2 9.6 8.2 7.1 6.2 5.5 4.9 4
80DML53.7 3.7 5 17.9 15.8 14.2 12.8 11.7 10.7 9.7 8.8 7.9
138
DMLSUBMERSIBLE PUMPS for dirty water
PERFORMANCE CURVES 100DML (according to ISO 9906 Annex A)
Pump type Q=Capacity
DML kW HPl/min 0 500 1000 1300 1600 1900 2200 2400 2500m3/h 0 30 60 78 96 114 132 144 150
H=total head [m]
100DML53.7 3.7 5 17.9 13.5 10.7 9.3 7.9 6.5 5 4 –
100DML55.5 5.5 7.5 22 17.9 14.9 13.4 11.9 10.6 9.3 8.5 –
100DML57.5 7.5 10 25.3 20.6 18 16.7 15.5 14.2 13 12.1 –
100DML511 11 15 30.3 27.5 25.2 23.7 22.2 20.7 19.1 18 17.5
100DML515 15 20 35 33.5 31.3 29.8 28.3 26.7 25.1 24 23.4
100DML522 22 30 40 38.5 36.4 34.9 33.3 31.7 30 28.7 28
139
DMLSUBMERSIBLE PUMPS for dirty water
PERFORMANCE CURVES 150DML (according to ISO 9906 Annex A)
Pump type Q=Capacity
DML kW HPl/min 0 1000 2000 2500 3000 3400 4000 4500 5000 5500m3/h 0 60 120 150 180 204 240 270 300 330
H=Total head [m]
150DML55.5 5.5 7.5 22 14.9 10.1 8 5.9 3.9 – – – –
150DML57.5 7.5 10 25.3 18 13.7 11.6 9.5 7.5 4 – – –
150DML511 11 15 30.3 25.2 20.2 17.5 14.7 12.2 8.6 5.4 – –
150DML515 15 20 35 31.3 26.1 23.4 20.6 18.2 14.8 11.9 8.6 –
150DML522 22 30 40 36.4 31.1 28 25.2 22.9 19.5 16.8 13.8 10.5
140
Pump type Dimensions WeightDML DA kW A B C D E F H J L1 L2 kg
80DML52.5 80 2.2 542 320 385 157 285 308 668 210 279 547 8080DML53.7 80 3.7 542 320 385 157 285 308 727 210 279 627 87100DML53.7 100 3.7 582 320 425 157 315 313 727 210 279 627 89100DML55.5 100 5.5 658 381 470 188 360 339 824 255 310 724 121100DML57.5 100 7.5 658 381 470 188 360 339 824 255 310 724 125100DML511 100 11 751 455 530 221 420 355 938 315 329 778 160100DML515 100 15 751 455 530 221 420 355 938 315 329 778 166100DML522 100 22 795 497 550 245 440 358 1021 335 342 841 226150DML55.5 150 5.5 715.5 381 527.5 188 385 369 824 255 310 724 127150DML57.5 150 7.5 715.5 381 527.5 188 385 369 824 255 310 724 132150DML511 150 11 808.5 455 587.5 221 445 385 938 315 329 778 166150DML515 150 15 808.5 455 587.5 221 445 385 938 315 329 778 172150DML522 150 22 852.5 497 607.5 245 465 388 1021 335 342 841 232
*
DMLSUBMERSIBLE PUMPS for dirty water
DIMENSIONS
FLANGES
DA DG DE DF DT
80 138 160 200 22100 158 180 220 24150 212 240 285 26
* LWL = Low water level
DIMENSIONAL TABLE
141
DMLSUBMERSIBLE PUMPS for dirty water
Spazio minimodi manovra
KIT DISCHARGE CONNECTOR DIMENSIONS LM8080 (100) DML 52.2, 53.7
FLANGES
DA DG DE DF DT
80 138 160 200 22100 158 180 220 24
DIMENSIONAL TABLEPump type Dimensions Kit discharge Weight
DML A P1 P2 G1 G2 F H1 H2 L1 L6 BN1 BN2 D1 E1 connector kg80DML52.2 492 75 90 125 165 295 175 230 279 7 75 90 15 155 LM80 1780DML53.7 492 75 90 125 165 295 175 230 279 7 75 90 15 155 LM80 17100DML53.7 492 75 90 125 195 300 175 230 279 7 75 90 15 155 LM80 17
* LWL = Low water level
*
Minimum manholedimensions in floorframe installation
142
Spazio minimodi manovra
KIT DISCHARGE CONNECTOR DIMENSIONS LL100100 (150) DML
FLANGES
DA DG DE DF DT
100 158 180 220 24150 212 240 285 26
DIMENSIONAL TABLEPump type Dimensions Kit discharge Weight
DML A P1 P2 G1 G2 F H1 H2 L1 L6 BN1 BN2 BM DM I D1 E1 connector kg100DML55.5 628 105 105 185 210 370 240 265 310 31 100 40 220 800 700 19 175 LL100 46100DML57.5 628 105 105 185 210 370 240 265 310 31 100 40 220 800 700 19 175 LL100 46100DML511 721 105 105 185 210 370 240 265 329 15 100 40 220 1000 700 19 175 LL100 46100DML515 721 105 105 185 210 370 240 265 329 15 100 40 220 1000 700 19 175 LL100 46100DML522 765 105 105 185 210 370 240 265 342 12 100 40 220 1000 700 19 175 LL100 46150DML55.5 628 105 105 185 235 400 240 265 310 31 100 40 220 800 700 19 175 LL100 46150DML57.5 628 105 105 185 235 400 240 265 310 31 100 40 220 800 700 19 175 LL100 46150DML511 721 105 105 185 235 400 240 265 329 15 100 40 220 1000 700 19 175 LL100 46150DML515 721 105 105 185 235 400 240 265 329 15 100 40 220 1000 700 19 175 LL100 46150DML522 765 105 105 185 235 400 240 265 342 12 100 40 220 1000 700 19 175 LL100 46
DMLSUBMERSIBLE PUMPS for dirty water
Minimum manholedimensions in floorframe installation
143
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
SPECIFICATIONS • Maximum positive suction pressure:
2 bar for all single-phase and for LPS 25 three-phase, 4 bar for LPS 32-40-50 three-phase
• Maximum liquid temperature: 100°C
MATERIALS• Pump casing, impeller and casing cover in AISI 304 • Shaft in AISI 303• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR
TECNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz - 3~400V ± 10% 50Hz• Permanent split capacitor and automatic thermal
overload protection for single-phase version• Thermal protection to be provided by the user
for three-phase version • Flange: PN10
In-line centrifugal pumps made of stainless steel AISI 304. Applications include chilled water, air-con-ditioning systems and heating systems for secondary hot water and general low-pressure applicationsin industry. Its light construction means installation can be achieved with 1 person where conven-tionally heavy cast iron & bronze pumps require additional personnel and lifting equipment.
DIMENSIONAL TABLEPump type Dimension (mm)
LPS 25/08 LPS 25/15LPS 25/25LPS 32/25 LPS 32/40LPS 40/25LPS 40/40LPS 40/75LPS 50/40LPS 50/75
LPS 50/150
300300300305305305305305310310310
320,5320,5320,5340340345345345
357,5357,5389,5
171171171171171171171171171171194
1~PG11PG11PG11PG11PG11PG11PG11PG11PG11PG11
PG13,5
181181181181181181181181181181213
2525253232404040505050
2525253232404040505050
115115115140140150150150165165165
858585
100100105105105120120120
858585
100100110110110125125125
E B H3 H4 T DNA DNM D1 D2 D3
1414141818181818181818
S
12,812,812,914,614,613,014,013,014,515,018,5
Weightkg
144
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz
LPS 25/08 M LPS 25/15 MLPS 25/25 MLPS 32/25 MLPS 32/40 MLPS 40/25 MLPS 40/40 MLPS 40/75 MLPS 50/40 MLPS 50/75 M
LPS 50/150 M
µF VcThree-phase230/400V 50Hz
LPS 25/08 LPS 25/15LPS 25/25LPS 32/25 LPS 32/40LPS 40/25LPS 40/40LPS 40/75LPS 50/40LPS 50/75
LPS 50/150
0,080,150,250,250,4
0,250,4
0,750,4
0,751,5
1,511,672,042,0
2,741,982,754,862,744,9
8,07
1,71,81,91,82,21,92,24,02,23,95,7
1,011,031,111,031,251,091,252,291,252,263,31
6,59,3
12,5--------
57,811,110,714,5
------
2,44,98,49,1
12,77,811,316,6
---
---
7,210,67,1
10,416---
---
5,99,26,69,9
15,29,1
13,819,8
---
3,97
5,68,7
14,18,8
13,319,3
-----
3,76,9
12,37,4
12,318,7
------
4,410,15,9
10,717,8
--------
3,58,216
---------5
13,7
12,512,512,512,512,512,512,525
12,52535
450450450450450450450450450450450
230V 400V1~ 3~ l/min
m3/h201,2
402,4
704,2
1006
1207,2
1509
20012
25015
32019,2
40024
H=Total head
PERFORMANCE CHART (according to ISO 9906 Annex A)
PERFORMANCE TABLE
145
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES LPS 25 series (according to ISO 9906 Annex A)
146
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES LPS 32 series (according to ISO 9906 Annex A)
147
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES LPS 40 series (according to ISO 9906 Annex A)
148
LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304
PERFORMANCE CURVES LPS 50 series (according to ISO 9906 Annex A)
149
IN-LINE CENTRIFUGAL PUMPS in cast iron
SPECIFICATIONS• Maximum positive suction pressure
10 bar for all models6 bar for LPC 40-100
• Maximum liquid temperature: -10°C +130°C
MATERIALS• Pump casing, impeller and casing cover in cast iron• Shaft in AISI 420• Bracket and motor casing in alluminium• Mechanical seal in Carbon/SiC/EPDM
(SiC/SiC/EPDM optional)
TECHNICAL DATA• Asynchronous 2 and 4 poles motor• Insulation Class F• Protection Degree IP 54• 3~ 230/400V ±10% 50 Hz up to 5.5 kW,
400-690V ±10% 50 Hz above• Thermal protection to be provided by the user for three-
phase version• PN10 Flanges
In-line centrifugal pumps made of cast iron. Applications include heating and air conditioning sys-tems, water lifting from wells, rivers and lakes, irrigation system on ground surface or by sprinkling,pressure systems, industrial services, domestic hot water supply systems.
LPC-LPC4, LPCD-LPCD4
150
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE CHART LPC series 2 POLES
R.P.M. ≈ 2900 min-1
Fluid test: clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
TOTA
LHEA
D
151
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE TABLE LPC 40-50-65-80-100 series 2 POLES
Pump type
Motor Q=Capacitym3/h 0 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 75 90 105 120 135 150 165 180 210l/min 0 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1250 1500 1750 2000 2250 2500 2750 3000 3500
kW HP H=Total head [m]LPC 40-100/0,55 0.55 0.75 12.2 11.7 11.4 11 10.5 9.9 9.3 8.5 7 - - - - - - - - - - - - - - - - - - -
LPC 40-100/0,75 0.75 1.0 14 13.5 13.3 13 12.5 12 11.4 10.7 9 7 - - - - - - - - - - - - - - - - - -
LPC 40-125/0,75 0.75 1.0 16.9 15.3 14.5 13.7 12.8 11.5 10.4 9 6 - - - - - - - - - - - - - - - - - - -
LPC 40-125/1,1 1.1 1.5 21.5 20.5 19.7 19 18.1 17.1 15.9 14.5 11.2 7.5 - - - - - - - - - - - - - - - - - -
LPC 40-125/1,5 1.5 2 25 24.5 24.1 23.5 22.9 22 20.8 19.5 16.5 13 - - - - - - - - - - - - - - - - - -
LPC 40-160/2,2 2.2 3 29 28.5 28 27.4 26.5 25.5 24.4 23.1 20 15 - - - - - - - - - - - - - - - - - -
LPC 40-160/3 3 4 34.5 33.5 33 32.5 31.8 31 30 29 26 22.5 - - - - - - - - - - - - - - - - - -
LPC 40-160/4 4 5.5 38.5 38 37.5 36.8 36 35 33.8 32.6 29.9 26.5 - - - - - - - - - - - - - - - - - -
LPC 40-200/4 4 5.5 47.5 47 46. 46 45 44 43 42 39.2 36.1 33 - - - - - - - - - - - - - - - - -
LPC 40-200/5,5 5.5 7.5 55.5 55 54.5 54.1 53.6 53 52 51 48.4 45.8 42.5 - - - - - - - - - - - - - - - - -
LPC 40-200/6,3 6.3 8.5 62.5 62 61.5 61 60.2 59 58.3 57.2 55 52 49 45 - - - - - - - - - - - - - - - -
LPC 50-125/1,5 1.5 2 16.8 - - - - 16 15.7 15.5 15 14.2 13.2 11.9 10.5 7 - - - - - - - - - - - - - -
LPC 50-125/2,2 2.2 3 20 - - - - 19.5 19.3 19.1 18.5 17.5 16.6 15.5 14.1 10.5 - - - - - - - - - - - - - -
LPC 50-125/3 3 4 25 - - - - 24.7 24.6 24.5 24.2 23.7 23 21.8 20.5 17 - - - - - - - - - - - - - -
LPC 50-160/3 3 4 31 - - - - 30.5 30.2 29.9 29 27.8 26.5 24.9 23 18 - - - - - - - - - - - - - -
LPC 50-160/4 4 5.5 38 - - - - 37 36.8 36.5 35.5 34.6 33.5 32.2 30.7 26.5 - - - - - - - - - - - - - -
LPC 50-200/5,5 5.5 7.5 46.8 - - - - 46 45.7 45.2 44.2 42.9 41 39.2 37 31 - - - - - - - - - - - - - -
LPC 50-200/6,3 6.3 8.5 51.7 - - - - 51.2 51 50.8 50 48.7 47 45 42.6 37 - - - - - - - - - - - - - -
LPC 50-200/7,5 7.5 10 58.5 - - - - 57.5 57.2 56.8 55.6 54.2 52.8 51 49 44 - - - - - - - - - - - - - -
LPC 65-125/2,2 2.2 3 18.5 - - - - - - - - 17.5 17 16.5 16 14.8 13 11 9 - - - - - - - - - - -
LPC 65-125/3 3 4 22.5 - - - - - - - - - 21 20.6 20.1 19 17.6 16 14 12 - - - - - - - - - -
LPC 65-125/4 4 5.5 26.3 - - - - - - - - - 25.5 25.2 24.8 24 22.9 21.5 19.6 17.5 - - - - - - - - - -
LPC 65-160/5,5 5.5 7.5 33 - - - - - - - - - 32.3 32 31.5 30.8 29.5 28 25.8 23.5 - - - - - - - - - -
LPC 65-160/7,5 7.5 10 37 - - - - - - - - - 36.7 36.4 36 35.2 34.1 32.8 31 28.8 26 - - - - - - - - -
LPC 65-200/10 10 13.6 52 - - - - - - - - - 51 50 49.2 48 45.5 43 39.7 36 31.5 - - - - - - - - -
LPC 65-200/12,5 12.5 17 58.5 - - - - - - - - - 57.5 57 56.5 55 53 50 46.5 42.5 38 - - - - - - - - -
LPC 80-160/10 10 13.6 31 - - - - - - - - - - - - - 30.5 30 29.5 29 28.3 27 24 20.2 16 - - - - -
LPC 80-160/12,5 12.5 17 37 - - - - - - - - - - - - - 36 35.5 35 34.5 34 32.8 30 27 23 19 - - - -
LPC 80-160/15 15 20 42 - - - - - - - - - - - - - 41 40.5 39.9 39.2 38.6 37.5 35.5 32.5 29 24 - - - -
LPC 80-200/15 15 20 44.2 - - - - - - - - - - - - - 44 43.8 43.4 43 42.5 41.5 39 35.5 31.5 - - - - -
LPC 80-200/18,5 18.5 25 51 - - - - - - - - - - - - - 50.5 50.1 49.9 49.5 49 48.3 46.3 43.2 39.5 35 - - - -
LPC 80-200/22 22 30 57.2 - - - - - - - - - - - - - 56.8 56.6 56.3 56 55.7 55 53.5 51 47.8 42.5 - - - -
LPC 100-160/10 10 13.6 24.8 - - - - - - - - - - - - - - - - 24 23.6 23 22 20.7 19.5 18.1 16.5 15 - -
LPC 100-160/12,5 12.5 17 29.5 - - - - - - - - - - - - - - - - 28.5 28.2 27.9 27 25.8 24.5 23 21.5 20 18.5 -
LPC 100-160/15 15 20 35 - - - - - - - - - - - - - - - - 34 33.8 33.3 32.5 31.7 30.5 29.2 27.6 26 24.5 -
LPC 100-200/18,5 18.5 25 42.3 - - - - - - - - - - - - - - - - 41.8 41.5 41 40 38.6 37 35 33 30.5 28 -
LPC 100-200/22 22 30 47.3 - - - - - - - - - - - - - - - - 47 46.7 46.3 45.5 44.4 43 41.2 39 36.7 34 -
LPC 100-200/30 30 40 55.5 - - - - - - - - - - - - - - - - - - 54 53 52 50.5 49 47 45 42.5 37
LPC 100-200/37 37 55 57.2 - - - - - - - - - - - - - - - - - - 56.7 56.3 55.8 55 53.8 52.3 50.5 48 42
LPC 100-250/37 37 55 68.5 - - - - - - - - - - - - - - - - - - 67.5 67 66.2 65 63.3 61 58.2 55 47
152
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE CHART LPCD series 2 POLES
R.P.M. ≈ 2900 min-1
Fluid test: clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
TOTA
LHEA
D
153
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE TABLE LPCD 40-50-65-80-100 series 2 POLES
Automatic operation of no-return valve
Left pump in operation Right pump in operation Parallel operation
Pump type
Motor Q=Capacitym3/h 0 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 75 90 105 120 135 150 165l/min 0 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1250 1500 1750 2000 2250 2500 2750
kW HP H=Total head [m]LPCD 40-125/0,55 0.55 0.75 14.2 12.5 11.6 10.6 9.7 8.5 7.4 6.2 - - - - - - - - - - - - - - - - - -
LPCD 40-125/0,75 0.75 1.0 16.9 15.3 14.5 13.7 12.8 11.5 10.4 9 6 - - - - - - - - - - - - - - - - -
LPCD 40-125/1,1 1.1 1.5 21.5 20.5 19.7 19 18.1 17.1 15.9 14.5 11.2 7.5 - - - - - - - - - - - - - - - -
LPCD 40-125/1,5 1.5 2 25 24.5 24.1 23.5 22.9 22 20.8 19.5 16.5 13 - - - - - - - - - - - - - - - -
LPCD 50-125/1,5 1.5 2 16.8 - - - - 16 15.7 15.5 15 14.2 13.2 11.9 10.5 7 - - - - - - - - - - - -
LPCD 50-125/2,2 2.2 3 20 - - - - 19.5 19.3 19.1 18.5 17.5 16.6 15.5 14.1 10.5 - - - - - - - - - - - -
LPCD 50-125/3 3 4 25 - - - - 24.7 24.6 24.5 24.2 23.7 23 21.8 20.5 17 - - - - - - - - - - - -
LPCD 50-160/3 3 4 31 - - - - 30.5 30.2 29.9 29 27.8 26.5 24.9 23 18 - - - - - - - - - - - -
LPCD 50-160/4 4 5.5 38 - - - - 37 36.8 36.5 35.5 34.6 33.5 32.2 30.7 26.5 - - - - - - - - - - - -
LPCD 65-160/3 3 4 24 - - - - - - - - 23 22.5 22 21.3 19.7 17.2 14.5 - - - - - - - - - -
LPCD 65-160/4 4 5.5 27.5 - - - - - - - - 27 26.6 26 25.5 24.2 22.5 20.2 16.8 - - - - - - - - -
LPCD 65-160/5,5 5.5 7.5 33 - - - - - - - - - 32.3 32 31.5 30.8 29.5 28 25.8 23.5 - - - - - - - -
LPCD 65-160/7,5 7.5 10 37 - - - - - - - - - 36.7 36.4 36 35.2 34.1 32.8 31 28.8 26 - - - - - - -
LPCD 80-160/7,5 7.5 10 26.2 - - - - - - - - - - - - 25.5 25.2 24.7 24 23.3 22.3 20.5 16.9 12.5 - - - -
LPCD 80-160/10 10 13.6 31 - - - - - - - - - - - - - 30.5 30 29.5 29 28.3 27 24 20.2 16 - - -
LPCD 80-160/12,5 12.5 17 37 - - - - - - - - - - - - - 36 35.5 35 34.5 34 32.8 30 27 23 19 - -
LPCD 80-160/15 15 20 42 - - - - - - - - - - - - - 41 40.5 39.9 39.2 38.6 37.5 35.5 32.5 29 24 - -
LPCD 100-200/12,5 12.5 17 34 - - - - - - - - - - - - - - - - 33 32.7 32 30.7 29 27 24.6 22 19
LPCD 100-200/15 15 20 39 - - - - - - - - - - - - - - - - 38.5 38.2 37.7 36.4 34.8 33 31 28.6 26
154
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE CHART LPC4 series 4 POLES
R.P.M. ≈ 1450 min-1
Fluid test: clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
TOTA
LHEA
D
155
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE TABLE LPC4 40-50-65-80-100 series 4 POLES
Pump type
Motor Q=Capacitym3/h 0 2.4 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 72 78 90 105 120 135
l/min 0 40 50 75 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1750 2000 2250kW HP H=Total head [m]
LPC4 40-100/0,25 0.25 0.33 3.7 3.6 3.55 3.5 3.3 2.9 2.5 2 1.5 - - - - - - - - - - - - - - - - - - -
LPC4 40-125/0.25 R 0.25 0.33 4.8 4.5 4.4 4.1 3.7 3 2.2 - - - - - - - - - - - - - - - - - - - - -
LPC44 40-125/0.25 0.25 0.33 6.3 - 6.2 6 5.7 5.2 4.5 3.9 2.8 - - - - - - - - - - - - - - - - - - -
LPC4 40-160/0.37 0.37 0.55 9.6 - 9.4 9.2 8.9 8.4 7.7 6.9 5.8 4.7 - - - - - - - - - - - - - - - - - -
LPC4 40-200/0.75 0.75 1.0 13.5 - - 12.8 12.4 11.9 11.3 10.6 9.8 9 8 6 - - - - - - - - - - - - - - - -
LPC4 40-200/0.92 0.92 1.25 15 - - 14.6 14.3 13.8 13.3 12.7 11.8 10.9 10 8 - - - - - - - - - - - - - - - -
LPC4 50-125/0.25 0.25 0.33 4.8 - - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.4 - - - - - - - - - - - - - - - -
LPC4 50-125/0.37 0.37 0.55 6.4 - - - 6.3 6.2 6.1 6 5.8 5.6 5.3 4.6 3 - - - - - - - - - - - - - - -
LPC4 50-160/0.55 0.55 0.75 9.2 - - - 8.8 8.6 8.4 8.1 7.7 7.3 6.8 5.8 4.4 - - - - - - - - - - - - - - -
LPC4 50-200/1.1 R 1.1 1.5 12.9 - - - 12.7 12.5 12.1 11.7 11.2 10.7 10.1 8.5 6.8 - - - - - - - - - - - - - - -
LPC4 50-200/1.1 1.1 1.5 14.5 - - - 14.2 14 13.8 13.4 13 12.5 11.8 10.2 8.3 6 - - - - - - - - - - - - - -
LPC4 65-125/0.37 0.37 0.55 5.4 - - - - - 5.3 5.25 5.2 5.1 5 4.8 4.5 4.1 3.6 - - - - - - - - - - - - -
LPC4 65-125/0.55 0.55 0.75 6.5 - - - - - 6.4 6.3 6.2 6.1 6 5.8 5.5 5.2 4.9 4.4 - - - - - - - - - - - -
LPC4 65-160/0.75 0.75 1.0 8.3 - - - - - - - 8.1 8 7.9 7.8 7.4 7 6.6 6 4 - - - - - - - - - - -
LPC4 65-160/0.92 0.92 1.25 9.1 - - - - - - - 9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 5.5 - - - - - - - - - - -
LPC4 65-200/1.1 1.1 1.5 12.6 - - - - - - - 12.3 12.2 12 11.5 10.8 10 9 8 5.8 - - - - - - - - - - -
LPC4 65-200/1.5 1.5 2 14.3 - - - - - - - 14.1 14.1 14 13.6 13 12.1 11.2 10.1 7.8 5 - - - - - - - - - -
LPC4 80-160/0.75 0.75 1 6.4 - - - - - - - - - - 6.3 6.1 6 5.8 5.6 4.9 4 3.2 2.2 - - - - - - - -
LPC4 80-160/0.92 0.92 1.25 7.4 - - - - - - - - - - 7.3 7.2 7.1 7 6.8 6.3 5.6 4.8 3.8 - - - - - - - -
LPC4 80-160/1.1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 7.9 7.3 6.7 5.9 5 - - - - - - -
LPC4 80-160/1.5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.5 9 8.4 7.5 6.5 - - - - - - -
LPC4 80-200/2.2 2.2 3 12.6 - - - - - - - - - - - - 12.5 12.4 12.3 12.1 11.7 11.1 10.4 9.6 8.5 - - - - - -
LPC4 80-200/3 3 4 15.4 - - - - - - - - - - - - 15.3 15.3 15.2 15 14.6 14.2 13.6 12.8 11.9 11 - - - - -
LPC4 100-160/1.5 1.5 2 8 - - - - - - - - - - - - - - - 7.7 7.5 7.2 7 6.7 6.4 6.1 5.8 5 - - -
LPC4 100-160/2.2 2.2 3 10 - - - - - - - - - - - - - - - 9.7 9.5 9.4 9.1 8.8 8.5 8.2 7.9 7.1 6 - -
LPC4 100-200/3 3 4 12.7 - - - - - - - - - - - - - - - 12 11.8 11.5 11.3 10.9 10.5 10 9.5 8.5 7 - -
LPC4 100-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - 14.3 14.2 14 13.8 13.4 13.1 12.7 12.2 11 9 6.5 -
LPC4 100-250/5.5 5.5 7.5 20 - - - - - - - - - - - - - - - - - 19.2 18.9 18.5 18.1 17.7 17.2 16 14.5 12 -
LPC4 100-250/7.5 7.5 10 23.5 - - - - - - - - - - - - - - - - - 22.3 22.1 21.9 21.7 21.3 21 20 18.5 16.8 14.5
156
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE CHART LPCD4 series 4 POLES
R.P.M. ≈ 1450 min-1
Fluid test: clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A
TOTA
LHEA
D
157
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
PERFORMANCE TABLE LPCD4 40-50-65-80-100 series 4 POLES
Pump type
Motor Q=Capacitym3/h 0 2.4 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 72 78 90 105 120
l/min 0 40 50 75 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1750 2000kW HP H=Total head [m]
LPCD4 40-100/0.25 0,25 0.33 4 3.7 3.6 3.1 2.6 1.9 - - - - - - - - - - - - - - - - - - - - -
LPCD4 40-125/0.25 R 0,25 0.33 4.8 4.5 4.4 4.1 3.7 3 2.2 - - - - - - - - - - - - - - - - - - - -
LPCD4 40-125/0.25 0.25 0.33 6.3 - 6.2 6 5.7 5.2 4.5 3.9 2.8 - - - - - - - - - - - - - - - - - -
LPCD4 50-125/0.25 0.25 0.33 4.8 - - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.4 - - - - - - - - - - - - - - -
LPCD4 50-125/0.37 0.37 0.55 6.4 - - - 6.3 6.2 6.1 6 5.8 5.6 5.3 4.6 3 - - - - - - - - - - - - - -
LPCD4 50-160/0.55 0.55 0.75 9.2 - - - 8.8 8.6 8.4 8.1 7.7 7.3 6.8 5.8 4.4 - - - - - - - - - - - - - -
LPCD4 65-160/0.55 0.55 0.75 6.9 - - - - - 6.8 6.7 6.6 6.5 6.4 6.1 5.7 5.1 4.3 3.3 - - - - - - - - - - -
LPCD4 65-160/0.75 0.75 1.0 8.3 - - - - - - - 8.1 8 7.9 7.8 7.4 7 6.6 6 4 - - - - - - - - - -
LPCD4 65-160/0.92 0.92 1.25 9.1 - - - - - - - 9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 5.5 - - - - - - - - - -
LPCD4 80-160/0.75 0.75 1 6.4 - - - - - - - - - - 6.3 6.1 6 5.8 5.6 4.9 4 3.2 2.2 - - - - - - -
LPCD4 80-160/0.92 0.92 1.25 7.4 - - - - - - - - - - 7.3 7.2 7.1 7 6.8 6.3 5.6 4.8 3.8 - - - - - - -
LPCD4 80-160/1.1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 7.9 7.3 6.7 5.9 5 - - - - - -
LPCD4 80-160/1.5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.5 9 8.4 7.5 6.5 - - - - - -
LPCD4 100-200/1.5 1.5 2 8.6 - - - - - - - - - - - - - - 8.1 7.8 7.4 7 6.5 5.9 5.2 4.5 3.8 - - -
LPCD4 100-200/2.2 2.2 3 10.6 - - - - - - - - - - - - - - 10.2 10 9.7 9.3 9 8.6 8.2 7.7 7.2 6 - -
LPCD4 100-200/3 3 4 12.7 - - - - - - - - - - - - - - - 12 11.8 11.5 11.3 10.9 10.5 10 9.5 8.5 7 -
LPCD4 100-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - 14.3 14.2 14 13.8 13.4 13.1 12.7 12.2 11 9 6.5
158
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
LPC 40-50 series DIMENSIONS 2 POLES
DIMENSIONAL TABLE
Dimensions [mm] WeightPump type
DTA/M DNA/M n f P K D H H1 H2 H3 H4 R F A B C[kg]
LPC 40-100/0.55 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 335 16LPC 40-100/0.75 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 335 16LPC 40-125/0.75 G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 24LPC 40-125/1.1 G1 1/2 40PN10 4 18 88 110 150 300 160 140 118 93 100 20 211 445 345 25LPC 40-125/1.5 G1 1/2 40PN10 4 18 88 110 150 300 160 140 118 93 100 20 211 445 345 26LPC 40-160/2.2 G1 1/2 40PN10 4 18 88 110 150 320 170 150 118 108 100 20 226 445 345 30LPC 40-160/3.0 G1 1/2 40PN10 4 18 88 110 150 320 170 150 149 108 100 20 257 485 385 35LPC 40-160/4.0 G1 1/2 40PN10 4 18 88 110 150 320 170 150 149 108 100 20 257 485 385 37LPC 40-200/4.0 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 525 425 50LPC 40-200/5.5 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 535 435 55LPC 40-200/6.3 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 535 435 56LPC 50-125/1.5 G2 50PN10 4 18 102 125 165 320 180 140 118 103 110 22 221 455 345 27LPC 50-125/2.2 G2 50PN10 4 18 102 125 165 320 180 140 118 103 110 22 221 455 345 28LPC 50-125/3.0 G2 50PN10 4 18 102 125 165 320 180 140 149 103 110 22 252 495 385 32LPC 50-160/3.0 G2 50PN10 4 18 102 125 165 340 180 160 149 113 110 22 262 495 385 32LPC 50-160/4.0 G2 50PN10 4 18 102 125 165 340 180 160 159 113 110 22 272 535 425 42LPC 50-200/5.5 G2 50PN10 4 18 102 125 165 400 220 180 159 131 110 22 290 545 435 56LPC 50-200/6.3 G2 50PN10 4 18 102 125 165 400 220 180 159 131 110 22 290 545 435 57LPC 50-200/7.5 G2 50PN10 4 18 102 125 165 400 220 180 184 131 110 22 315 650 540 64
159
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
LPC 65-80-100 series DIMENSIONS 2 POLES
DIMENSIONAL TABLE
Dimensions [mm] WeightPump type
DTA/M DNA/M n f P K D H H1 H2 H3 H4 R F A B C[kg]
LPC 65-125/2.2 G2 1/2 65PN10 4 18 122 145 185 360 205 155 118 108 140 22 226 485 345 32LPC 65-125/3.0 G2 1/2 65PN10 4 18 122 145 185 360 205 155 149 108 140 22 257 525 385 39LPC 65-125/4.0 G2 1/2 65PN10 4 18 122 145 185 360 205 155 159 108 140 22 267 565 425 43LPC 65-160/5.5 G2 1/2 65PN10 4 18 122 145 185 400 220 180 159 122 140 22 281 575 435 54LPC 65-160/7.5 G2 1/2 65PN10 4 18 122 145 185 400 220 180 184 122 140 22 306 680 540 61LPC 65-200/10 G2 1/2 65PN10 4 18 122 145 185 440 240 200 184 136 140 22 320 680 540 70LPC 65-200/12.5 G2 1/2 65PN10 4 18 122 145 185 440 240 200 184 136 140 22 320 680 540 77LPC 80-160/10 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 72LPC 80-160/12.5 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 79LPC 80-160/15 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 85LPC 80-200/15 G3 80PN10 4 18 138 160 200 500 275 225 184 146 160 24 330 700 540 91LPC 80-200/18.5 G3 80PN10 4 18 138 160 200 500 275 225 229 146 160 24 375 860 700 124LPC 80-200/22 G3 80PN10 4 18 138 160 200 500 275 225 229 146 160 24 375 860 700 142LPC 100-160/10 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 76LPC 100-160/12.5 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 84LPC 100-160/15 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 91LPC 100-200/18.5 G4 100PN10 8 18 158 180 220 550 300 250 230 156 190 26 386 890 710 135LPC 100-200/22 G4 100PN10 8 18 158 180 220 550 300 250 230 156 190 26 386 890 710 153LPC 100-200/30 G4 100PN10 8 18 158 180 220 550 300 250 257 156 190 26 413 995 805 195LPC 100-200/37 G4 100PN10 8 18 158 180 220 550 300 250 257 156 190 26 413 995 805 213LPC 100-250/37 G4 100PN10 8 18 158 180 220 600 320 280 257 176 190 26 433 995 805 220
160
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
LPCD 40-50-65-80-100 series DIMENSIONS 2 POLES
DIMENSIONAL TABLE
Dimensions [mm]Pump type Weight
DTA/M DNA/M n f P K D H H1 H2 H3 H4 M R F A B C[kg]
LPCD 40-125/0.55 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 50LPCD 40-125/0.75 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 50LPCD 40-125/1.1 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 445 345 52LPCD 40-125/1.5 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 445 345 54LPCD 50-125/1.5 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 455 345 56LPCD 50-125/2.2 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 455 345 58LPCD 50-125/3.0 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 495 385 66LPCD 50-160/3.0 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 495 385 72LPCD 50-160/4.0 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 535 425 86LPCD 65-160/3.0 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 515 385 81LPCD 65-160/4.0 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 555 425 101LPCD 65-160/5.5 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 565 435 125LPCD 65-160/7.5 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 565 435 132LPCD 80-160/7.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 130 24 550 565 435 137LPCD 80-160/10 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 141LPCD 80-160/12.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 162LPCD 80-160/15 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 175LPCD 100-200/12.5 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 720 540 162LPCD 100-200/15 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 720 540 162
161
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
LPC4 40-50-65-80-100 series DIMENSIONS 4 POLES
DIMENSIONAL TABLEDimensions [mm]
WeightPump type
DTA/M DNA/M n f P K D H H1 H2 H3 H4 R F A B C[kg]
LPC4 40-100/0.25 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 355 16 LPC4-40-125/0.25 R G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 20LPC4 40-125/0.25 G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 20LPC4 40-160/0.37 G1 1/2 40PN10 4 18 88 110 150 320 170 150 107 108 100 20 215 425 325 23LPC4 40-200/0.75 G1 1/2 40PN10 4 18 88 110 150 380 200 180 118 127 100 20 245 445 345 30LPC4 40-200/0.92 G1 1/2 40PN10 4 18 88 110 150 380 200 180 118 127 100 20 245 445 345 31LPC4 50-125/0.25 G2 50PN10 4 18 102 125 165 320 180 140 107 103 110 22 210 435 325 21LPC4 50-125/0.37 G2 50PN10 4 18 102 125 165 320 180 140 107 103 110 22 210 435 325 22LPC4 50-160/0.55 G2 50PN10 4 18 102 125 165 340 180 160 107 113 110 22 220 435 325 25LPC4 50-200/1.1 R G2 50PN10 4 18 102 125 165 400 220 180 149 131 110 22 280 495 385 36LPC4 50-200/1.1 G2 50PN10 4 18 102 125 165 400 220 180 149 131 110 22 280 495 385 36LPC4 65-125/0.37 G2 1/2 65PN10 4 18 122 145 185 360 205 155 107 108 140 22 215 465 325 25LPC4 65-125/0.55 G2 1/2 65PN10 4 18 122 145 185 360 205 155 107 108 140 22 215 465 325 26LPC4 65-160/0.75 G2 1/2 65PN10 4 18 122 145 185 400 220 180 118 122 140 22 240 485 345 32LPC4 65-160/0.92 G2 1/2 65PN10 4 18 122 145 185 400 220 180 118 122 140 22 240 485 345 33LPC4 65-200/1.1 G2 1/2 65PN10 4 18 122 145 185 440 240 200 149 136 140 22 285 525 385 38LPC4 65-200/1.5 G2 1/2 65PN10 4 18 122 145 185 440 240 200 149 136 140 22 285 525 385 40LPC4 80-160/0.75 G3 80PN10 4 18 138 160 200 440 240 200 118 131 160 24 249 505 345 36LPC4 80-160/0.92 G3 80PN10 4 18 138 160 200 440 240 200 118 131 160 24 249 505 345 37LPC4 80-160/1.1 G3 80PN10 4 18 138 160 200 440 240 200 149 131 160 24 280 545 385 38LPC4 80-160/1.5 G3 80PN10 4 18 138 160 200 440 240 200 149 131 160 24 280 545 385 40LPC4 80-200/2.2 G3 80PN10 4 18 138 160 200 500 275 225 159 146 160 24 305 585 425 51LPC4 80-200/3.0 G3 80PN10 4 18 138 160 200 500 275 225 159 146 160 24 305 585 425 57LPC4 100-160/1.5 G4 100PN10 8 18 158 180 220 525 300 225 149 136 190 26 285 575 385 45LPC4 100-160/2.2 G4 100PN10 8 18 158 180 220 525 300 225 159 136 190 26 295 615 425 50LPC4 100-200/3.0 G4 100PN10 8 18 158 180 220 550 300 250 159 156 190 26 315 615 425 66LPC4 100-200/4.0 G4 100PN10 8 18 158 180 220 550 300 250 159 156 190 26 315 625 435 73LPC4 100-250/5.5 G4 100PN10 8 18 158 180 220 600 320 280 184 176 190 26 360 730 540 96LPC4 100-250/7.5 G4 100PN10 8 18 158 180 220 600 320 280 184 176 190 26 360 730 540 106
162
IN-LINE CENTRIFUGAL PUMPS in cast iron
LPC-LPC4, LPCD-LPCD4
LPCD4 40-50-65-80-100 series DIMENSIONS 4 POLES
DIMENSIONAL TABLE
Dimensions [mm] WeightPump type
DTA/M DNA/M n f P K D H H1 H2 H3 H4 M R F A B C[kg]
LPCD4 40-100/0.25 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 40-125/0.25R G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 40-125/0.25 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 50-125/0.25 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 435 325 44LPCD4 50-125/0.37 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 435 325 46LPCD4 50-160/0.55 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 435 325 52LPCD4 65-160/0.55 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 65LPCD4 65-160/0.75 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 65LPCD4 65-160/0.92 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 67LPCD4 80-160/0.75 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 485 335 72LPCD4 80-160/0.92 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 485 335 74LPCD4 80-160/1.1 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 535 385 79LPCD4 80-160/1.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 535 385 83LPCD4 100-200/1.5 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 535 355 110LPCD4 100-200/2.2 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 605 425 130LPCD4 100-200/3.0 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 605 425 138LPCD4 100-200/4.0 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 615 435 150
163
MRTHREE SPEED CIRCULATOR
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: 110°C • Maximum ambient temperature: 55°C• Maximum circulator surface temperature: 125°C
MATERIALS• Pump casing in cast iron • Shaft in chrome steel • Impeller in tecnopolymer• Can in stainless steel
TECHNICAL DATA• 3 speed motor with regulator on the terminal box • Insulation class H• 1~230V 50HzWith water at 90°C a mimimum inlet pressure of 1,5 mt.must be guaranteed in order to avoid cavitation troubles.
Available in the following versions:
- mm.130 with 1” and 1”1/2 pipe male connection with 2 gaskets- mm.180 with 1”1/2 and 2” pipe male connection with 2 gaskets- mm.120 flanged, with 2 gaskets and bolts
Small 3 speed circulators for heating systems.
PERFORMANCE CURVES (according to ISO 9906 Annex A)
MR 43 MR 53 MR 63
164
ETHERMAFOUR SPEED CIRCULATORS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: -15°C ÷ +120°C
MATERIALS• Pump casing in cast iron or bronze • Shaft in chrome steel • Impeller in tecnopolymer or bronze• Can in stainless steel
TECHNICAL DATA• 3 speed motor with regulator on the terminal box • Insulation class F, IP 44• 1~230V 50Hz, 3~ 400V±6% -10%, 50 HzWith water at 90°C a mimimum inlet pressure of 1,5 m mustbe guaranteed in order to avoid cavitation troubles.
Available in the following versions:
- mm.130 with 1” and 1”1/4 pipe male connection with 2 gaskets- mm.180 with 1”1/4 and 2” pipe male connection with 2 gaskets- mm.120 flanged, with 2 gaskets and bolts
In-line pumps with motor mounted directly onto the pump body and provided with multi-speed reg-ulator giving greater flexibility. It allows the pump to be more accurately matched to the system’shydraulic requirements and reduces flows velocity noise and also reduces power consuption.Suitable for domestic and industrial heating systems and secondary hot water applications.
165
ETHERMACIRCOLATORI A QUATTRO VELOCITÀ
PERFORMANCE CHART at 2800 min -1 (according to ISO 9906 Annex A)
PERFORMANCE CHART at 1400 min -1 (according to ISO 9906 Annex A)
8-120-2 (D)
5-95-2 (D)
4-95-2 (D)5-88-2 (D)4-75-2 (D)
4-60-2 (D)
3-100-2 (D)
2/3-72-2 (D)
2-70-2/3-70-2 (D)2-65-2/3-65-2 (D)
8-100-2 (D)
8-95-2 (D)
5-120-2
6-110-2 (D)
6-95-2 (D)
166
ETHERMA EELECTRONIC CIRCULATORS
SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: +15°C ÷ +120°C • Maximum viscosity: 10 mm2/s (10 cst)
MATERIALS• Pump casing in cast iron • Shaft in chrome steel • Impeller in tecnopolymer• Can in stainless steel
TECHNICAL DATA• Insulation class F, IP 44• 1~230V, 3~400V (±10%) 50HzElectronic overload protection incorporated.(single and twin versions available)
In-line pumps with motor mounted directly onto the pump body and provided with integrated elec-tronic speed control giving greater flexibility. It allows the pump to be more accurately matched to thesystem’s hydraulic requirements and reduces flows velocity noise and also reduces power consup-tion. Suitable for domestic and industrial heating systems.
167
BEST BOX-MINIRIGHT-SANIRELEVAUTOMATIC LIFTING STATIONS
SANIRELEV 22• Predisposed to two pumps type DW or DW VOX • Free passage: 50 mm • Outlet diam. DN50/DN63 • Tank capacity: 540 l • Weight: 30 kg
Sanirelev 22 MPC: single-phase, foot bracket, panel and float switch Sanirelev 22 TPC: three-phase, foot bracket, panel and float switch
SANIRELEV 11• Predisposed to pump type DW or DW VOX • Free passage: 50 mm • Outlet diam. DN50/DN63 • Tank capacity: 360 l • Weight: 21,5 kg
Sanirelev 11 MSA: single-phase, support and float switchSanirelev 11 MPA: single-phase, foot bracket and float switchSanirelev 11 MSC: single-phase, support, panel and float switchSanirelev 11 MPC: single-phase, foot bracket, panel and float switch Sanirelev 11 TSC: three-phase, support, panel and float switchSanirelev 11 TPC: three-phase, foot bracket, panel and float switch
725 mm
1035
mm
810 mm
810 mm725 mm
835
mm
BEST BOX (Garage version)• Predisposed to pump type Best one Vox • Free passage: 20 mm • Outlet diam. 1”1/4
• Tank capacity: 30 l • Weight : 125 kg
BEST BOX (Shower and Washbasin version)• Predisposed to pump type Best one • Free passage: 10 mm • Outlet diam. 1”1/4
• Tank capacity: 30 l • Weight without pump: 8,5 kg
MINI RIGHT • Predisposed to pump type Right series • Free passage: 35 mm • Outlet diam. 50 mm• Tank capacity: 100 l • Weight: 26 kg
510 mm
470
mm
375 mm
270 mm
405 mm
360
mm
510 mm
730
mm
430 mm
635
mm
168
GP-GP INOX
Automatic booster units constructed from one single-phasepump, pressure vessel.
Fitted with non return valvePressure SwitchPressure gauge
• Ready for installation by a suitably qualified tradesman.• Package Sewage Stations• Standard units available with inlet & outlets locations to
suit the applications - installation parameters.
Booster can be built with all Ebara single-phase pumps ofthe following series:
• CD-2CD• CDX-2CDX• JES-JE• JESX-JEX• COMPACT• AGA-AGC-AGE-AGF• CMA-CMB-CDA
PERFORMANCE CURVES PERFORMANCE CURVES
BOOSTER UNITS WITH ONE PUMP
Note: tanks optional
170
2GP-3GP-GPEPRESSURE SETS
For any information, please contact our sales dept.
PERFORMANCE CHART
For complete technical and performance datas of the complete range: request the wide “Pressure Boostersets” catalogue
Complete automatic pressure sets provided of several pump models, adapted for centrifugal, multistage horizontal,vertical centrifugal pumps.
171
CONTROL BOXES
Pump type HP kW Currentmin. A max A
2EP 0,37T UA 0,5+0,5 0,37+0,37 0,9 1,32EP 0,55T UA 0,75+0,75 0,55+0,55 1,4 1,92EP 0,75T UA 1+1 0,75+0,75 2 32EP 1,1T UA 1,5+1,5 1,1+1,1 2 32EP 1,5T UA 2+2 1,5+1,5 3 3,92EP 2,2T UA 3+3 2,2+2,2 4,5 5,82EP 3,7T UA 5+5 3,7+3,7 6 82EP 5,5T UA 7,5+7,5 5,5+5,5 9 13,52EP 7,5T UA 9,5+9,5 7+7 14 182EP 11T UA 15+15 11+11 17 222EP 13,5T UA 18,3+18,3 13,5+13,5 20 29
Pump type HP kW Amperometricprotectionregulation
2EP 0,25M UA 0,34+0,34 0,25+0,25 32EP 0,37M UA 0,5+0,5 0,37+0,37 42EP 0,55M UA 0,75+0,75 0,55+0,55 62EP 0,75M UA 1+1 0,75+0,75 82EP 1,1M UA 1,5+1,5 1,1+1,1 102EP 1,5M UA 2+2 1,5+1,5 162EP 2,2M UA 3+3 2,2+2,2 18
Pump type HP kW Amperometricprotectionregulation
1EP 0,37-2,2 kWT UA 0,5-3 0,37-2,2 2 - 8 A1EP 3-7,5 kWT UA 4-15 3-7,5 5 - 14 A1EP 9,2-11 kWT UA 12,5-15 9,2-11 18 - 22 A
Pump type HP kW Amperometricprotectionregulation
1 EP 0,37-2,2 kW UAM 0,5-3 0,37-2,2 0 - 18 A
Protection IP 55Control box for single-phase surface electropumps, submersibleone and, using a capacitor, borehole electropumps.Auxiliary circuits at low voltage, possibility to check the level byprobes, float switches or pressure switch. Amperometric protectionregulation. The UA version is supplied with remote alarm outlet.
Single-phase 230 V - 50 Hz
TYPE 1EP 0,37-2,2 kW M (CE)
Protection IP 55Control boxes for three-phase surface electropumps, submersibleone and borehole ones.Self-starting. Auxiliary circuits at low voltage, possibility to checkthe level by probes, float switches or pressure switch.Amperometric protection regulation. Soon it will be available withremote alarm outlet.
Three-phase 400 V - 50 Hz
TYPE 1EP TUA (CE)
Protection IP 55Control boxes with self-starting for two three-phase surface electropumps orsubmersible ones. Auxiliary circuits at low voltage, possibility to check the levelby the float switches or by the pressure switch.As standard version, they are with inverter to start the motors and with remotealarm outlet.
Three-phase 400 V - 50 Hz
TYPE 2 EP TUA (CE)
Protection IP 55Control boxes for two single-phase surface electropumps or sub-mersible ones.Auxiliary circuits at low voltage, possibility to check the level byfloat switches or pressure switch. As standard version, they arewith inverter to start the motors and with remote alarm outlet.
Single-phase 230 V - 50 Hz
TYPE 2EP MUA (CE)
Pump type HP kW Currentmin. A max A
2EP 7,5 SD UA 10 7,5 15 182EP 9,25 SD UA 12,5 9,2 17 202EP 11 SD UA 15 11 18 232EP 15 SD UA 20 15 24 352EP 18,5 SD UA 25 18,5 27 402EP 22 SD UA 30 22 35 52
Protection IP 55Control boxes with star-delta starting tor two three-phase surface electropumpsor submersible ones.Auxiliary circuits at low voltage, possibility to check the level by float switches orpressure switch.As standard version they are with inverter to start the motors and with remotealarm outlet.
Three-phase 400 V - 50 Hz
TYPE 2 EP SD UA
Pump type HP kW Currentmin. A max A
1 EP 7,5 SD UA 10 7,5 15 181 EP 11 SD UA 15 10 18 231 EP 15 SD UA 20 15 24 35
1 EP 18,5 SD UA 25 18,5 35 451 EP 22 SD UA 30 22 35 521 EP 30 SD UA 40 30 49 661 EP 37 SD UA 50 37 75 85
Protection IP 55Control box for three-phase surface electropumps, submersibleone and borehole electropumps.Star-delta starting, auxiliary circuits at low voltage, possibility tocheck the level by pressure switch (optional by probes). Soon itwill be available with remote alarm outlet.
Three-phase 400 V - 50 Hz
TYPE 1EP SD
172
Load losses (Pc) in meters (column of water)Flow rate (V m/s).
LOAD LOSSES TABLE
Capacity Internal diameter (mm)
Discharge diameter
Suction diameter
EBARA PUMPS EUROPE S.p.A.Via Pacinotti, 3236040 BRENDOLA (VICENZA), ItalyPhone: +39 0444 706811 - Fax: +39 0444 706950Plants: Cles, Brendolaebara_pumps@ebaraeurope.comwww.ebaraeurope.com
EBARA PUMPS UK LIMITEDUnit 7 - Zodiac ParkHigh Road - CowleyUxbridgeMiddlesex UB8 2GUPhone: 01895 439027Fax: 01895 439028
EBARA ESPAÑA BOMBAS S.A.Poligono Las Arenas, C/Alameda, 128320 PINTO (MADRID), SpainPhone: 916.923.630Fax: 916.923.891
EBARA FRANCEZ.I. des Amandiers 39 Rue des Entrepreneurs78420 CARRIERES-SUR-SEINE, FrancePhone: (1) 30865480Fax: (1) 39131971
EBARA PUMPENPhilipp-Reis - Str. 1563128 DIETZENBACH, GermanyPhone: 6074/82790Fax: 6074/827942
EBARA Pompy Polska Sp. z o.o.ul. Minska 6303-828 Warszawa, Polandtel.: +48 22 3308118Fax.: +48 22 3308119
Italian Branches EBARA BARIVia Po, 370026 MODUGNO (BA)Tel. 080/5320531 - Fax: 080/5320478
EBARA CAGLIARIVia del Fangario, 29 - 09122 CAGLIARITel. 070/274281 - Fax: 070/253643
EBARA FIRENZEVia del Pesco, 15 Loc. La Querce59100 PRATOTel. 0574/514175 - Fax: 0574/700126
EBARA MILANOVia Magenta, 77 - 20017 RHO (MI)Tel. 02/93507358/59 - Fax: 02/93507361
EBARA PALERMOVia Don L. Sturzo, 181/183ZONA INDUSTRIALE - 90044 CARINI (PA)Tel. 091/8680840 - Fax: 091/8669790
EBARA PESCARAVia Aterno, 31 - Z. Ind.le e Com.le66100 SAMBUCETO - S. GIOVANNI TEATINO (CH)Tel. 085/4465145 - Fax: 085/4465171
EBARA ROMAVia E. Ferrari, 10500043 CIAMPINO (RM)Tel. 06/79341516 - Fax: 06/79341628
Agenzie CATANZAROEUROSERVICE S.N.C.Tel. 0961 769015 - Fax 0961 61317
NAPOLIDIVIERRETel. 081 2583654 - Fax 081 2508617
PADOVANEGRISOLO GIANNITel. 049 9900296 - Fax 049 9903539
PORDENONEFOR-TECTel. 0434 957878 - Fax 0434 560343
GENOVANICOLOSITel. 010 322128 - Fax 010 322128
Principal EBARA Group Companies in Europe