Shanghai Huaming Power Equipment Co., Ltd.

Operating InstructionsAutomatic Voltage Regulator ET-SZ6

Thank you for using our Automatic Voltage Regulator

Please make sure you will read this “Operation Instruction”

carefully before operating this regulator.

1

HMO.460.555

2

3

HMO.460.555

4

Shanghai Huaming Power Equipment Co.,Ltd.

D

5

HMO.460.555

6

7

HMO.460.555

8

9

HMO.460.555

“ ”Down key

“ ”Left key confirm “ ”Right key

“ ”Up key

“Confirm” key

10

The selected menu

Main menu

Project menuNote: Press “ ” key to select

the up options; Press key

to select the down options.

Setup project

Note:1. Set up numerical value parameter:

“ ” key: Select cyclically the

data bit

“ ” key: Add 1 to the selected

data bit.

2. Set up property parameter:

“ ”: Change the property value

“ ”key

Press “confirm” key

“ ”key

Press “confirm”

Key (save and return)

“ ”(not save and return)

11

HMO.460.555

12

13

HMO.460.555

98

210

Fastener

Controller

Control screen

14

15

HMO.460.555

16

17

HMO.460.555

18

19

HMO.460.555

7F00H Remote measure (YC) high byte address

7F01H Remote measure (YC) low byte address

7F02H Remote control (YK) high byte address

7F03H Remote control (YK) low byte address

Shanghai Huaming Power Equipment Co., Ltd.

Address: No. 977 Tongpu Road, Shanghai 200333, ChinaTel/Fax: (86) 21 - 5270 2715Web Site: www.huamig.comE-mail: public@huaming.com export@huaming.com

2006.9