Post on 03-Apr-2018
transcript
2
CORPORATE
2 GW VERTICAL INTEGRATION
GRID PARITY FORMULA
POLYSILICON
INGOTS
WAFERS
CELLS
MODULES
SYSTEMS
PROJECTS AND PRODUCTS
LDK PROJECTS AND SYSTEMS CASES
LDK MODULES: QUALITY AND GUARANTEES
FULL-BLACK MODULE
FRAMELESS MODULE
MONOCRYSTALLINE MODULES
POLYCRYSTALLINE MODULES
LDK SYSTEMS: RESIDENTIAL KITS
LDK SYSTEMS: FINANCIAL SOLUTIONS
ADVERTISING
4
7
8
9
10
11
12
13
14
19
20
21
22
26
32
34
35
CONTENTS
3
LDK SOLAR ISTHE WORLD’S LARGEST AND MOST COSTEFFECTIVE VERTICALLY INTEGRATEDMANUFACTURER,BEST IN CLASS TECHNOLOGY
Vertically integrated solar manufacturerCost leaderLeadership in PV modules and technologyStrong and diversified customer baseAttractive growth strategies
4
POLYSILICON
12.000 MT TODAY25.000 MT BY END OF 2011
TRULY VERTICA LLY INTEGRATED LEADER IN THE SOLAR INDUSTRY
INGOT/WAFER
IN HOUSE
3.6 GW TODAY4.2 GW BY END OF 2011
SILICON RECYCLING
IN HOUSE
6.000 / 8.000 MT PER YEAR
IN HOUSE & THIRD PARTY
5
TRULY VERTICA LLY INTEGRATED LEADER IN THE SOLAR INDUSTRY
MODULE
IN HOUSE
2 GW TODAY3.2 GW BY END OF 2011
PV FINANCINGSOLUTIONS
GLOBAL PRESENCE
CELL
IN HOUSE & THIRD PARTY
1 GW TODAY2 GW BY END OF 2011
7
GRID PARITY FORMULA
LDK Solar manufactures polysilicon, mono and multi crystalline ingots, wafers, cells and modules under one roof. An incredibly competitive cost structure with high quality and efficiency products that means the best formula to the real grid parity.
2 GWTHE BIGGEST FULLYINTEGRATED PRODUCTION IN THE WORLD
ECONOMIESOF SCALE & RAPIDGROWTH
+
COMPETITIVECOST STRUCTURE+
HIGH QUALITYHIGH EFFICIENCYPRODUCTS
+
GRID PARITYLDK SOLAR=
8
THE GLOBAL LEADINGPOLYSILICON PLANT SITE
LDK POLYSILICON 12.000
MTtoday
As a part of its vertical integration strategy, in 2008 LDK Solar constructed a polysilicon plant with two production facilities, near its wafer production facilities. With a total yearly production capacity of 12000 MT, this is the largest single polysilicon manufacturing plant site in the world.The installation of a closed loop polysilicon production process allows LDK Solar to produce and use on site many of the key chemicals and gases required to make silicon, while also recycling residual STC.
TECHNICAL SPECIFICATION 11N
SiliconGrade
Semi-conductorGrade
Solar Grade
N-TypeResistivity (Ω.cm)
> 300
> 50
P-TypeResistivity (Ω.cm)
> 3000
> 500
Carbon Content(atoms/cm3)
> 1,5 x 1 E16
> 2,5 x 1 E16
9
LARGER INGOT PRODUCTION MEANS COST REDUCTION
LDK INGOTS3.6
GWtoday
At LDK Solar, we produce larger monocrystalline and multicrystalline ingots. This innovation enables us to increase our yield of ingots and improve the utilization rates of our facilities thus reducing costs by reaching large scale economies. For example, LDK Solar produces 800-kg multicrystalline ingots which increase throughput production efficiencies by reducing manufacturing bottlenecks.
LARGER INGOT SIZE FURTHER LOWERS COST
G4 250-270 kg
G5 400-450 kg
G6 650-800 kg
G6 800 kgLDK CURRENTPRODUCTION
10
THE LARGEST MULTICRYSTALLINE WAFERPROVIDER IN THE WORLD
LDK WAFERS 3.6
GWtoday
As the largest multicrystalline wafer provider in the world, LDKSolar has an established track record of consistently deliveringhigh quality solar wafers to our valued customers. We take pride in providing technologically advanced and reliable solar wafers. At LDK Solar, we utilize state-of-the-art wafer processing equipment combined with proprietary know-how that enables us to make efficient use of polysilicon and therefore lower the costs.
Mono
Multi
11
PV CELL IN-HOUSEMANUFACTURING
LDK CELLS1GWtoday
Manufacturing in-house PV cells and increasing the efficiency of solar cells is one of the most effective ways to reduce the cost of PV modules. We completed our 1 GW manufacturing line and can now produce our own cells in-house. We also developed new high-efficiency monocrystalline and multicrystalline cell technology. Manufacturing our own cells in-house enables us to reduce the cost of modules and increase quality management.
Mono
Multi
12
MAKING SOLARMODULES ACCESSIBLEFOR EVERYONE
LDK MODULES2GWtoday
• Vertically integrated manufacturing• Large scale production facilities• Proven low-cost manufacturing• High-quality, high-efficiency products• Leading global wafer supplier• Diversified global customer base
CAPACITY:
600 MWApril 2010
2 GWToday
3.2 GWBy the end of 2011
Mono
Multi
13
THE FINAL DOWNSTREAM INTEGRATION
LDK SYSTEMS / PROJECTS
LDK Solar has reached our goal to become the most vertically integrated PV company by also providing systemintegration. With proven experience, know-how and passion to help our clients, LDK Solar can provide engineering and design support, ensure the quality of the products and monitor the efficiency of the system.
We can also offer financing solutions, thanks to a strategic agreement with China Development Bank that will provide up to $ 8.9 billion of credit facilities to LDK Solar over a five-year period.
Financial
solution
service
NEW
15
LDK SYSTEM CASES IN 2010
Country: ItalySite: Altamura (BA)Peak power: 1 MWTechnology: Ground mono axisModules: LDK 220WMonths since connection: 12PRODUCTION: 1.700.000 kWhPR: 81% (+ 6% COMPARED TO JRC)
Country: ItalySite: Palo del Colle (BA)Peak power: 1 MWTechnology: Ground fixModules: LDK 220WMonths since connection: 4PRODUCTION: 372.492 kWhPR: 86% (+ 11% COMPARED TO JRC)
SOLD
SOLD
16
LDK SYSTEM CASES IN 2010
Country: ItalySite: Roccaforzata (TA)Peak power: 1 MWTechnology: Ground fixModules: LDK 220WMonths since connection: 7PRODUCTION: 695.523 kWhPR: 83% (+8% COMPARED TO JRC)
Country: ItalySite: PugliaPeak power: 3 MWTechnology: Ground mono axisModules: LDK 220W
SOLD
FINANCED
BY CDB
17
LDK SYSTEM CASES IN 2011
Country: ItalySite: San Gregorio nelle Alpi (BL)Peak power: 857 kWTechnology: Greenhouses and parkingModules: LDK 240W
Country: ItalySite: Loria (TV)Peak power: 309 kWTechnology: GreenhousesModules: LDK 230W
CONNECTED
CONNECTED
18
LDK SYSTEM CASES IN 2011
42 MW PV project in Germany co-financed by LDK Solar and Q-Cells
Site: Finsterwalde, Germany
19
OUR MODULE QUALITY IS RELIABLEAND GUARANTEED
LDK SOLAR MODULES
MODULEQUALITY
MODULEWARRANTY
MODULERECYCLING
MANUFACTURED UNDER STRINGENT QUALITY CONTRACT STANDARDS:
• 0/+5 Wp power classification• high conversion efficiency• ability to withstand wind and snow load, and extreme temperature variations• rigorous quality control meeting the highest international standards• industry leading 25 year power warranty
ONE OF THE MOST COMPREHENSIVE WARRANTIES IN THE SOLAR INDUSTRY:
• materials and workmanship - covered for 10 years• power rating - tight power tolerances within +/- 3% of the module nameplate
rating• start date - from the date of sale, not the date of manufacture• transferability - transferable to future system owners unlike other standard
warranties
SINCE THE BEGINING OF 2010 LDK SOLAR IS A PROUD MEMBER OF PV CYCLE
LDK Solar is committed to finding new ways to make our solar modules even more environmentally friendly, from increasing both cell and production efficiencies, to proactively adopting recycling programs for end-of-life PV modules
20
185D-190D-195D-200D-24 (S)FULL-BLACK DESIGN
FULL-BLACK MODULE
PRODUCT HIGHLIGHTS
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
Cur
rent
[A]
Voltage [V]
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
DIMENSIONS
Tolerance of length and width dimensions is ± 2 mm
40
950
808770
800
50
50
30
30
140
390
808
1580
4-10×10Drainage holes
4 places
8-8x3Drainage holes
8 placesJunction box
8-14x9Mounting slots
8 places
2-Ø4Ground holes
2 places
1300
1580
• Best efficiency and reliability with a modern and attractive black look
• Designed to be the perfect module for roof-top and residential roof
• Based on strict demands to reach architectural appearance requirements
• Highlights: elegant, modern and attractive
ELECTRIC CHARACTERISTICS (STC*)
MECHANICAL CHARACTERISTICS
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
18536.95.0245.15.48
17.7714.49
72 (6x12) monocryst. silicon solar cells 125 x 125 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 950 mm / Section: 4.0 mm2
1580 x 808 x 40 mm / 62,2 x 31,8 x 1,6 (new dim.)15.6 kg / 34.4 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
19537.95.1645.35.54
18.7315.27
19037.75.0545.25.51
18.2514.88
20038.15.2745.45.57
19.2116.67
TYPE
TYPE
TYPE
185D-24(s)
185D-190D-195D-200D-24(s)
195D-24(s)
190D-24(s)
200D-24(s)
IEC: 1000V / UL: 600 V
IEC: 1000V / UL: 600 V
NEW
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
LDK Solar reserves the right to make specifications changes without any prior notice.This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited.All rights reserved. E.&O.E.
21
185D-190D-195D-200D-24 (S) FRAMELESS FOR BIPV AND ARCHITECTURE
FRAMELESS MODULE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
PRODUCT HIGHLIGHTS
Cur
rent
[A]
Voltage [V]
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
DIMENSIONS
Tolerance of length and width dimensions is ± 2 mm
950
802
1574
104,
24
Junction box
• Specially designed for BIPV and architectural applications
• Suitable for all standard building-integrated mounting systems
• Allows easy and flexible installation on roof-top use
• Options: standard or black appearance available
ELECTRIC CHARACTERISTICS (STC*)
MECHANICAL CHARACTERISTICS
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Solar CellsFront CoverBack CoverEncapsulantDiodesJunction BoxConnectorCablesDimensionWeight
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
18536.95.0245.15.48
17.7714.49
72 (6x12) monocryst. silicon solar cells 125 x 125 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 950 mm / Section: 4.0 mm2
1574 x 802 x 4,5 mm / 62 x 31.6 x 0,2 inches (new dim.)12.4 kg / 26,4 lbs
19537.95.1645.35.54
18.7315.27
19037.75.0545.25.51
18.2514.88
20038.15.2745.45.57
19.2116.67
TYPE
TYPE
TYPE
185D-24(s)
185D-190D-195D-200D-24(s)
195D-24(s)
190D-24(s)
200D-24(s)
IEC: 1000V / UL: 600 V
IEC: 1000V / UL: 600 V
NEW
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
LDK Solar reserves the right to make specifications changes without any prior notice.This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited.All rights reserved. E.&O.E.
22
18036.24.9844.95.46
17.2814.10
13032.83.9641.34.42
45±2°C-0.47% / °C-0.34% / °C0.06% / °C
20 A-40 to +85°C-40 to +60°C
25 pcs. / box 50 pcs. / pallet
700 pcs. / 40 ft (H)
72 (6x12) monocrystalline silicon solar cells 125 x 125 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 950 mm / Section: 4.0 mm2
1580 x 808 x 40 mm / 62,2 x 31,8 x 1,6 inches (new dimensions)15.6 kg / 34.4 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
18536.95.0245.15.48
17.7714.49
13433.63.9841.54.44
19037.75.0545.25.51
18.2514.88
13834.63.9941.64.46
19537.95.1645.35.54
18.7315.27
14235.54.0141.84.48
20038.15.2745.45.57
19.2116.67
14636.44.0342
4.50
ELECTRIC CHARACTERISTICS (STC*)
ELECTRICAL PERFORMANCE AT NOCT
TEMPERATURE CHARACTERISTICS
PACKING CONFIGURATION
MECHANICAL CHARACTERISTICS
TYPE
TYPE
TYPE
TYPE
TYPE
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp)Open Circuit Voltage (Voc)Short Circuit Current (Isc)
NOCT** Temperature Coefficient of PmaxTemperature Coefficient of VocTemperature Coefficient of IscMaximum Series Fuse RatingOperating TemperatureStorage Temperature
Packing ConfigurationQuantity/PalletLoading Capacity
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
NOCT: Irradiance 800 W/m2, Module Temperature 45± 2°C, Air Mass 1.5
NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20°C; wind speed 1m/s
LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited. All rights reserved. E.&O.E.
180D-24(s)
180D-24(s)
LDK-D-24 Series (s)
LDK-D-24 Series (s)
LDK-D-24 Series (s)
185D-24(s)
185D-24(s)
190D-24(s)
190D-24(s)
195D-24(s)
195D-24(s)
200D-24(s)
200D-24(s)
IEC: 1000V / UL: 600 V
MONOCRYSTALLINE MODULES
23
180D-185D-190D-195D-200D-24 (S)NEW DIMENSIONS
WHY LDK SOLAR MODULES
WARRANTIES
CERTIFICATES
• Industry leading module power output warranty• International quality, safety and performance certifications• Modules manufactured in ISO 9001 certified factories• High-reliability with guaranteed 0/+5W peak power
classification
• 10 years for product defects in materials & workmanship• 12 years for 90% of warranted minimum power• 25 years for 80% of warranted minimum power
• IEC: IEC 61215, IEC 61730 (1&2), conformity to CE• UL1703 2002/03/15 Ed:3 Rev: 2004/06/30• ULC/ORD-C1703-01 second edition 2001/01/01• UL and Canadian standard for safety flat-plate• ISO9001:2008 Quality Management System• CEC Listed: modules are eligible for California rebates• PV Cycle: voluntary module take back and recycling program
PERFORMANCE AT LOW IRRADIANCE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
DIMENSIONS
1.05
1
0.95
0.9
0.85
0.8200 300 400 500 600 700 800 900 1000
Rel
ativ
e Ef
ficie
ncy
Cur
rent
[A
]
Irradiance [W/m2]
Voltage [V]
The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 1000W/m² (both at 25°C and AM 1.5 spectrum) is less than 6%
Above graphics according to LDK-180D-24(s)
Tolerance of length and width dimensions is ± 2 mm
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
40
950
808770
800
50
50
30
30
140
390
808
1580
4-10×10Drainage holes
4 places
8-8x3Drainage holes
8 placesJunction box
8-14x9Mounting slots
8 places
2-Ø4Ground holes
2 places
1300
1580
24
22531.57.1537.08.11
16.1813.79
22031.27.0536.98.01
15.8113.48
16326.86.0934.16.57
15926.56.0134.06.48
45±2°C-0.47% / °C-0.34% / °C0.06% / °C
20-40 to +85°C-40 to +60°C
25 pcs. / box 50 pcs. / pallet
700 pcs. / 40 ft (H)
60 (6x10) monocrystalline silicon solar cells 156 x 156 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 1000 mm / Section: 4.0 mm2
1642 x 994 x 40 mm / 64.2 x 39.1 x 1.6 inches20 kg / 44.1 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
23031.87.2337.28.21
16.5614.09
16727.16.1634.36.65
23532.07.3537.28.30
16.9014.40
17027.36.2334.36.72
24032.27.4537.38.39
17.2514.70
24532.47.5637.48.48
17.5115.01
17427.76.2834.36.79
17828.06.3634.46.87
25032.67.6737.58.57
17.9315.32
25532.87.7837.68.66
18.3416.03
26033.07.8837.88.76
18.7016.34
18128.26.4134.56.94
18528.56.4934.67.00
18828.76.5534.77.06
ELECTRIC CHARACTERISTICS (STC*)
ELECTRICAL PERFORMANCE AT NOCT
TEMPERATURE CHARACTERISTICS
PACKING CONFIGURATION
MECHANICAL CHARACTERISTICS
TYPE
TYPE
TYPE
TYPE
TYPE
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp)Open Circuit Voltage (Voc)Short Circuit Current (Isc)
NOCT** Temperature Coefficient of PmaxTemperature Coefficient of VocTemperature Coefficient of IscMaximum Series Fuse RatingOperating TemperatureStorage Temperature
Packing ConfigurationQuantity/PalletLoading Capacity
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
NOCT: Irradiance 800 W/m2, Module Temperature 45± 2°C, Air Mass 1.5
NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20°C; wind speed 1m/s
LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited. All rights reserved. E.&O.E.
225D-20220D-20
225D-20220D-20
LDK-D-20 Series
LDK-D-20 Series
LDK-D-20 Series
230D-20
230D-20
235D-20
235D-20
240D-20 245D-20
240D-20 245D-20
250D-20 255D-20 260D-20
250D-20 255D-20 260D-20
IEC: 1000V / UL: 600 V
MONOCRYSTALLINE MODULES
25
220D-225D-230D-235D-240D-245D-250D-255D-260D-20
WHY LDK SOLAR MODULES
WARRANTIES
CERTIFICATES
• Industry leading module power output warranty• International quality, safety and performance certifications• Modules manufactured in ISO 9001 certified factories• High-reliability with guaranteed 0/+5W peak power
classification
• 10 years for product defects in materials & workmanship• 12 years for 90% of warranted minimum power• 25 years for 80% of warranted minimum power
• IEC: IEC 61215, IEC 61730 (1&2), conformity to CE• UL1703 2002/03/15 Ed:3 Rev: 2004/06/30• ULC/ORD-C1703-01 second edition 2001/01/01• UL and Canadian standard for safety flat-plate• ISO9001:2008 Quality Management System• CEC Listed: modules are eligible for California rebates• PV Cycle: voluntary module take back and recycling program
PERFORMANCE AT LOW IRRADIANCE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
DIMENSIONS
Rel
ativ
e Ef
ficie
ncy
The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 1000W/m² (both at 25°C and AM 1.5 spectrum) is less than 6%
Above graphics according to LDK-220D-20
Tolerance of length and width dimensions is ± 2 mm
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
4-10×10Drainage holes
4 places
8-8x3Drainage holes
8 places
Junction box
8-14x9Mounting slots
8 places
2-Ø4Ground holes
2 places
1000
800
1300
1642
1642
30 50
171
421
994 40994
3050
9561.05
1
0.95
0.9
0.85
0.8200 300 400 500 600 700 800 900 1000
Cur
rent
[A
]
Irradiance [W/m2]
Voltage [V]
26
17035.94.7644.05.13
15.5813.32
12332.63.7740.54.15
17536.14.8744.35.21
16.0413.71
12733.13.8340.84.22
18036.44.9644.65.28
16.4914.10
13033.63.8741.14.27
45±2°C-0.47% / °C-0.34% / °C0.06% / °C
20 A-40 to +85°C-40 to +60°C
25 pcs. / box 50 pcs. / pallet
700 pcs. / 40 ft (H)
72 (6x12) polycrystalline silicon solar cells 125 x 125 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 950 mm / Section: 4.0 mm2
1580 x 808 x 40 mm / 62.4 x 31.8 x 1.6 inches (new dimensions)15.6 kg / 34.4 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
18536.85.0244.95.51
16.9514.49
13433.63.9941.34.46
19037.25.1
45.15.6
17.4114.88
13834.14.0541.54.53
19537.55.2
45.35.69
17.8715.27
14134.64.1
41.74.6
20037.85.3
45.55.78
18.3315.67
14535
4.1641.94.67
ELECTRIC CHARACTERISTICS (STC*)
ELECTRICAL PERFORMANCE AT NOCT
TEMPERATURE CHARACTERISTICS
PACKING CONFIGURATION
MECHANICAL CHARACTERISTICS
TYPE
TYPE
TYPE
TYPE
TYPE
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp)Open Circuit Voltage (Voc)Short Circuit Current (Isc)
NOCT** Temperature Coefficient of PmaxTemperature Coefficient of VocTemperature Coefficient of IscMaximum Series Fuse RatingOperating TemperatureStorage Temperature
Packing ConfigurationQuantity/PalletLoading Capacity
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
NOCT: Irradiance 800 W/m2, Module Temperature 45± 2°C, Air Mass 1.5
NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20°C; wind speed 1m/s
LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited. All rights reserved. E.&O.E.
170P-24(s)
170P-24(s)
175P-24(s)
175P-24(s)
180P-24(s)
180P-24(s)
LDK-P-24 Series (s)
LDK-P-24 Series (s)
LDK-P-24 Series (s)
185P-24(s)
185P-24(s)
190P-24(s)
190P-24(s)
195P-24(s)
195P-24(s)
200P-24(s)
200P-24(s)
IEC: 1000V / UL: 600 V
POLYCRYSTALLINE MODULES
27
170P-175P-180P-185P-190P-195P-200P-24 (S)NEW DIMENSIONS
WHY LDK SOLAR MODULES
WARRANTIES
CERTIFICATES
• Industry leading module power output warranty• International quality, safety and performance certifications• Modules manufactured in ISO 9001 certified factories• High-reliability with guaranteed 0/+5W peak power
classification
• 10 years for product defects in materials & workmanship• 12 years for 90% of warranted minimum power• 25 years for 80% of warranted minimum power
• IEC: IEC 61215, IEC 61730 (1&2), conformity to CE• UL1703 2002/03/15 Ed:3 Rev: 2004/06/30• ULC/ORD-C1703-01 second edition 2001/01/01• UL and Canadian standard for safety flat-plate• ISO9001:2008 Quality Management System• CEC Listed: modules are eligible for California rebates• PV Cycle: voluntary module take back and recycling program
PERFORMANCE AT LOW IRRADIANCE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
DIMENSIONS
Rel
ativ
e Ef
ficie
ncy
The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 1000W/m² (both at 25°C and AM 1.5 spectrum) is less than 6%
Above graphics according to LDK-175P-24(s)
Tolerance of length and width dimensions is ± 2 mm
40808
1580
4-10×10Drainage holes
4 places
8-8x3Drainage holes
8 placesJunction box
8-14x9Mounting slots
8 places
2-Ø4Ground holes
2 places
950
808770
1580
1300
800
50
50303014
039
0
1.05
1
0.95
0.9
0.85
0.8200 300 400 500 600 700 800 900 1000
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
Cur
rent
[A
]
Irradiance [W/m2]
Voltage [V]
28
21529.87.2336.37.98
15.1813.17
15626.35.9333.46.46
22529.97.5336.78.24
15.8913.79
22029.87.4036.58.14
15.5313.48
16326.76.1233.86.67
15926.46.0433.66.59
45±2°C-0.47 % / °C-0.34 % / °C0.06 % / °C
20 A-40 to +85°C-40 to +60°C
25 pcs. / box 50 pcs. / pallet
700 pcs. / 40 ft (H)
60 (6x10) polycrystalline silicon solar cells 156 x 156 mm3.2 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 1000 mm / Section: 4.0 mm2
1642 x 994 x 40 mm / 64.6 x 39.1 x 1.6 inches20 kg / 44.1 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
23029.97.6836.88.34
16.2414.09
16727.16.1933.96.75
23530.07.8436.88.35
16.5914.40
17027.46.2233.96.76
24030.07.9836.98.35
16.9414.70
24530.18.1437.28.48
17.2915.01
17428.06.2334.06.76
17828.16.3334.36.87
25030.28.2837.58.59
17.6415.32
18128.26.4234.56.95
ELECTRIC CHARACTERISTICS (STC*)
ELECTRICAL PERFORMANCE AT NOCT
TEMPERATURE CHARACTERISTICS
PACKING CONFIGURATION
MECHANICAL CHARACTERISTICS
TYPE
TYPE
TYPE
TYPE
TYPE
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp)Open Circuit Voltage (Voc)Short Circuit Current (Isc)
NOCT** Temperature Coefficient of PmaxTemperature Coefficient of VocTemperature Coefficient of IscMaximum Series Fuse RatingOperating TemperatureStorage Temperature
Packing ConfigurationQuantity/PalletLoading Capacity
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
NOCT: Irradiance 800 W/m2, Module Temperature 45± 2°C, Air Mass 1.5
NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20°C; wind speed 1m/s
LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited. All rights reserved. E.&O.E.
215P-20
215P-20
225P-20220P-20
225P-20220P-20
LDK-P-20 Series
LDK-P-20 Series
LDK-P-20 Series
230P-20
230P-20
235P-20
235P-20
240P-20 245P-20
240P-20 245P-20
250P-20
250P-20
IEC: 1000V / UL: 600 V
POLYCRYSTALLINE MODULES
29
215P-220P-225P-230P-235P-240P-245P-250P-20
WHY LDK SOLAR MODULES
WARRANTIES
CERTIFICATES
• Industry leading module power output warranty• International quality, safety and performance certifications• Modules manufactured in ISO 9001 certified factories• High-reliability with guaranteed 0/+5W peak power
classification
• 10 years for product defects in materials & workmanship• 12 years for 90% of warranted minimum power• 25 years for 80% of warranted minimum power
• IEC: IEC 61215, IEC 61730 (1&2), conformity to CE• UL1703 2002/03/15 Ed:3 Rev: 2004/06/30• ULC/ORD-C1703-01 second edition 2001/01/01• UL and Canadian standard for safety flat-plate• ISO9001:2008 Quality Management System• CEC Listed: modules are eligible for California rebates• PV Cycle: voluntary module take back and recycling program• MCS The Microgeneration Certification Scheme UK
PERFORMANCE AT LOW IRRADIANCE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
DIMENSIONS
Rel
ativ
e Ef
ficie
ncy
The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 1000W/m² (both at 25°C and AM 1.5 spectrum) is less than 6%
Above graphics according to LDK-220P-20
Tolerance of length and width dimensions is ± 2 mm
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
4-10×10Drainage holes
4 places
8-8x3Drainage holes
8 places
8-14x9Mounting slots
8 places
2-Ø4Ground holes
2 places
40
421
171
50
1642
1000
800
1300
1642
994994956
30 50
Junction box
1.05
1
0.95
0.9
0.85
0.8200 300 400 500 600 700 800 900 1000
Cur
rent
[A
]
Irradiance [W/m2]
Voltage [V]
30
45±2°C-0.47 % / °C-0.34 % / °C0.06 % / °C
20 A-40 to +85°C-40 to +60°C
20 pcs. / box 40 pcs. / pallet
440 pcs. / 40 ft (H)
72 (6x12) polycrystalline silicon solar cells 156 x 156 mm4 mm thick, tempered glass / AR coating glass
TPT (Tedlar-PET-Tedlar) / BBFEVA (ethylene vinyl acetate)
Anodized aluminium alloy, double wall6 Bypass diodes serviceable
IP65 ratedMC4 or compatible connector
Lentgh: 1200 mm / Section: 4.0 mm2
1946 x 976 x 50 mm / 76.6 x 38.4 x 2.0 inches27.3 kg / 60.2 lbs
Wind Load: 2400Pa / Snow Load: 5400 Pa
27036.27.4744.28.21
16.0513.87
19631.86.1540.76.65
27536.27.6044.38.28
16.3514.13
19932.16.2140.86.70
28036.37.7244.38.36
16.6614.39
28536.47.8344.48.44
16.9615.00
20332.46.2740.86.77
20732.86.3140.96.81
29036.57.9544.48.52
17.2715.27
21033
6.3940.96.91
ELECTRIC CHARACTERISTICS (STC*)
ELECTRICAL PERFORMANCE AT NOCT
TEMPERATURE CHARACTERISTICS
PACKING CONFIGURATION
MECHANICAL CHARACTERISTICS
TYPE
TYPE
TYPE
TYPE
TYPE
Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V]Current at Pmax (Imp) [A]Open Circuit Voltage (Voc) [V]Short Circuit Current (Isc)The power tolerance is +/- 3% referred to the Nominal OutputMaximum System VoltageCell EfficiencyModule Efficiency
Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp)Open Circuit Voltage (Voc)Short Circuit Current (Isc)
NOCT** Temperature Coefficient of PmaxTemperature Coefficient of VocTemperature Coefficient of IscMaximum Series Fuse RatingOperating TemperatureStorage Temperature
Packing ConfigurationQuantity/PalletLoading Capacity
Solar CellsFront CoverBack CoverEncapsulantFrameDiodesJunction BoxConnectorCablesDimensionWeightMax. Load
STC* (Standard Test Conditions): Irradiance 1000W/m2, Module Temperature 25°C, Air Mass 1.5
NOCT: Irradiance 800 W/m2, Module Temperature 45± 2°C, Air Mass 1.5
NOCT**: Nominal Operation Cell Temperature Sun 800 W/m2; Air 20°C; wind speed 1m/s
LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 50380 requirement. May 2011/V3/ ©LDK Solar Limited. All rights reserved. E.&O.E.
LDK-P-24 Series (s)
LDK-P-24 Series (s)
LDK-P-24 Series (s)
270P-24(s)
270P-24(s)
275P-24(s)
275P-24(s)
280P-24(s) 285P-24(s)
280P-24(s) 285P-24(s)
290P-24(s)
290P-24(s)
IEC: 1000V / UL: 600 V
POLYCRYSTALLINE MODULES
31
270P-275P-280P-285P-290P-24 (S)NEW DIMENSIONS
WHY LDK SOLAR MODULES
WARRANTIES
CERTIFICATES
• Industry leading module power output warranty• International quality, safety and performance certifications• Modules manufactured in ISO 9001 certified factories• High-reliability with guaranteed 0/+5W peak power
classification
• 10 years for product defects in materials & workmanship• 12 years for 90% of warranted minimum power• 25 years for 80% of warranted minimum power
• IEC: IEC 61215, IEC 61730 (1&2), conformity to CE• UL1703 2002/03/15 Ed:3 Rev: 2004/06/30• ULC/ORD-C1703-01 second edition 2001/01/01• UL and Canadian standard for safety flat-plate• ISO9001:2008 Quality Management System• CEC Listed: modules are eligible for California rebates• PV Cycle: voluntary module take back and recycling program
PERFORMANCE AT LOW IRRADIANCE
IV CURVE AT DIFFERENT IRRADIANCE LEVELS
DIMENSIONS
Rel
ativ
e Ef
ficie
ncy
The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 1000W/m² (both at 25°C and AM 1.5 spectrum) is less than 6%
Above graphics according to LDK-270P-24(s)
Tolerance of length and width dimensions is ± 2 mm
2-Ø4
1200
50
Ground holes2 places
8-8×3Drainage holes
8 places
8-14×9Mounting slots
8 places
Junction box
976924
1946
±113
00±1
800±
152
52
40
40
323
573
4-10×10Drainage holes
4 places
976
1946
1.05
1
0.95
0.9
0.85
0.8200 300 400 500 600 700 800 900 1000
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45 50
Cur
rent
[A
]
Irradiance [W/m2]
Voltage [V]
32
• Designed to meet French certification for 2012• Possible to integrated inpitched roofs with a slope as low
as 4°• Solar tiles - simple and fast installation• Reliable production and monitoring• European quality• First-class after sales service based in Europe
• High-quality mounting system• Excellent adaptability to all kind of roofs• Black anodized module clamps• Longevity of system• Reliable production and monitoring• European quality• First-class after sales service based in Europe
• Full black laminated modules with CSTB approved system• Suitable to cover almost all types of coverage• Roof slope > 4° (within the specifications if < 20°)• Landscape oriented modules• Support profiles in extruded aluminum alloy (6060 T6)• Custom Flashing System galvanized lacquered 75/100ths• EPDM rubber seals dual hardness• Cooling polymer glass fiber reinforced PP• Anti tearing polymer PA
• Full Black framed modules• Suitable for most types of roof covering• Roof slope up to 60°• Wind load Up to 50 m/s• Snow load Up to 1,4 kN/m• Portrait or landscape oriented modules• Roof hooks and fasteners Stainless steel (V2A)• System support rail in extruded aluminium (6063 T6)
RESIDENTIAL KITS
LDK SYSTEMS
As the photovoltaic sector moves towards grid parity economies must be made along the entire value chain. That’s why a large integrated company like LDK now offers a complete kit for residential, agricultural and small commercial installations.LDK offers both an in roof, architectural solution for new build and BIPV applications and a high quality on roof solution. LDK’s in roof solution fullfils the French criteria of integration of CEIAB (Comité d’Evaluation l’Intégration au Bâti). LDK will provide attractive full-black laminates and full-black modules to ensure an attractive look to our installations.
GENERAL CHARACTERISTICS FOR ON ROOF INSTALLATION:
BIPV ARCHITECTURAL SOLUTIONS ON ROOF QUALITY SOLUTIONS
GENERAL CHARACTERISTICS FOR IN ROOF INTEGRATION:
33
Every kit consists of the following components:
• High performance full black monocrystalline modules
• High quality LDK Inverter for standard configurations
• LDK mounting system for both BIPV or on roof applications
• DC cable set• All other accessories: data logger and
display, system documentation
SYSTEM SPECIFICATIONS
ELECTRICAL CHARACTERISTICS:
185
36.9
5.02
45.1
5.48
187.5
37.3
5.04
45.2
5.50
190
37.7
5.05
45.2
5.51
TYPE
Nominal Output (Pmax) [W]
Voltage at Pmax (Vmp) [V]
Current at Pmax (Imp) [A]
Open Circuit Voltage (Voc) [V]
Short Circuit Current (Isc)
The power tolerance is +/- 3% referred to the Nominal Output
Maximum System Voltage
185D-24(s) 187D-24(s) 190D-24(s)
IEC: 1000V / UL: 600 V
NEW
34
FINANCIAL SOLUTIONS
SYSTEMS AND PV PROJECTS
LDK IS BUILDING A STRONG PV PROJECTS BUSINESSES BY LEVERAGING A STRONG FINANCING SOLUTION BACKED BY THE CHINA DEVELOPMENT BANK.
FINANCED BY CDB 42 MW PV PROJECT IN GERMANYCO-FINANCED BY LDK SOLARAND Q-CELLS
• Strong financing support from China Development Bank: ¥ 60 bilion credit line• High quality, large volume, low-cost and bankable solar products• Offer financial support to customer in different markets• Local customer support from local teams• Provide one-stop-shop solar energy solutions and services, which is especially important in less sophisticated emerging markets• Proven business model and track record• Increasing PV projects pipeline
LDK NORTH AMERICA
LDKEUROPE
LDK CHINA
Financial
solution
service from
1 to 500 MW
WE WILL MANAGEEVEN WITHOUT HELP
© U
li Wies
meie
r/Cor
bis |
mela
niaz
ilio.co
m
www.ldksolar.com
SILICON INGOTS WAFERS CELLS MODULES PV SYSTEMS
2 GW fully vertically integrated leading Company from silicon to PV systems
www.ldksolar.com
HEADQUARTERSJIANGxI LDK SOLAR HI-TECH CO., LTDLDK Avenue, Economic Development Zone, Xinyu, Jiangxi, 338032 P.R. ChinaPh. +86.790.6669000
LDK SOLAR HI-TECH (SUZHOU) CO., LTD 6th Floor 1368 Wuzhong Avenue, Wuzhong District, Suzhou City, P.R. China
LDK SOLAR HI-TECH (NANCHANG) SO., LTD.No. 999 Torch Boulevard, Nanchang City, Jiangxi Province, P.R. China
LDK SOLAR USA, INC. 1290 Oakmead Parkway, Suite 306, Sunnyvale, CA 94085 - USAPh. +1.408.2450858 - info.usa@ldksolar.com
LDK SOLAR EUROPE HOLDING S.A12F Rue Guillame Kroll, L-1882 Luxembourg
LDK SOLAR ITALYVia S. Martino, 25 31020 San Zenone degli Ezzelini, Treviso - ItalyPh. +39.0423.948833
Via Giulio Cesare Procaccini, 4820154 Milano - ItalyPh. +39 02 87242050 info.it@ldksolar.com
LDK SOLAR GERMANY Landsberger Strasse 302 80687 Munich - GermanyPh. +49.90405.276 - info.de@ldksolar.com
LDK SOLAR UKPh. +44.787.5685085 - info.uk@ldksolar.com
LDK SOLAR FRANCEPh. +33.619.606288 - info.fr@ldksolar.com
LDK SOLAR SPAINPh. +34.672.074200 - info.es@ldksolar.com