Post on 14-Mar-2018
transcript
1
How to Navigate to Ford Workshop Manual Information:
• From the PTS
Homepage, click on
the “Vehicle ID” tab
October, 2015
2
Once “Vehicle ID” is selected, there
are two ways to locate specific
vehicle information on PTS:
• Entering a VIN # (preferred
method)
• Manually identify a vehicle
by year and model
• Note: A subscription may
be required to access
vehicles older then the
current model year
How to Navigate to Ford Workshop Manual Information:
October, 2015
3
To lookup information utilizing a
VIN, enter the VIN # in the box
shown in step 1.
Once the VIN is entered click on
“Go” in step 3.
How to Navigate to Ford Workshop Manual Information:
October, 2015
4
How to Navigate to Ford Workshop Manual Information:
From the OASIS page, click on the
“Workshop” tab
October, 2015
WJ(8
Slide 4
WJ(8 need to put red boxes around each information point on this slideWillis, Jeff (J.E.), 7/13/2015
5
To lookup information by
manually by entering a model
year and model, click on the
“By Year & Model” button
How to Navigate to Ford Workshop Manual Information:
October, 2015
6
In Step 2, select the year and
model on the LH side.
Once the VIN is entered click
on “Go” in step 3.
How to Navigate to Ford Workshop Manual Information:
October, 2015
7
Once the screen loads, click on
the “Workshop Tab”
How to Navigate to Ford Workshop Manual Information:
October, 2015
8
After clicking on the “Workshop”
tab, the workshop manual will load
the specified vehicle information.
The workshop manual is organized
by:
• System
• Group
• Section
• Subsection
Navigate by clicking on the section
names on the LH side of the screen
How to Navigate to Ford Workshop Manual Information:
October, 2015