Post on 05-Dec-2014
description
transcript
04/09/2023 1
Presented By: Pradeep KumarScholar No.: 13-22-212
Specialization: Design & ManufacturingDepartment of Mechanical Engineering
Green Manufacturing
2
Definitions Need Goals Benefits Process Different Aspects Example in the real world. Summary
Topic Overview
3
It is about implementing any kind of substitution in the manufacturing process which leads to a reduction in energy consumption, resource consumption, waste by-products, and water usage.
The design, processing and commercial use of materials processes and products, which are economical and sustainable while minimizing pollution and risk to human health and the environment.
What is green manufacturing ?
4
Need of green manufacturing Customers are environment conscious. Environmental protection is a top agenda for everyone. Reasons for environmental care
running out of fossil fuel supply (energy crisis) global warming
depletion of the ozone layer loss of trees and forest
Green manufacturing is a challenge for today but as Business opportunities for tomorrow
5
Green Manufacturing’s Goal
Its goal is to achieve sustainability. Every company when it comes to green
manufacturing should be conserving natural resources for future generations.
6
Fig no : 1
7
Benefits Of Green Manufacturing
Creates a great reputation to the public Saves useless cost. Promotes Research and Design
8
E-waste treatment in guangdong ,China
Fig no : 2
9
Process of Green Manufacturing Lead-Free Soldering for electronics Reduce Emission of Pollutants Use of environment-friendly chemicals Use the lead-free solders to manufacture the products and don’t
allow any intentionally added Pb in the products, then the products can be defined as lead-free products.
Packaging Materials – Disposal and Environment-friendly
No release of toxic substances in product life
End of Life Treatment – Recycling of Components, Collection of equipment .
Use of Biodegradable materials .
10
Different Aspects in green manufacturing
JIT Manufacturing Zero Emission Strategy ISO 9000 and ISO 14000
11
Green Recycling :
Doormat - Lakeland Limited(made from recycled rubber)
Caddies - CAT(Made from recycled plastic)
Chair - Blue Marmalade Ltd.(made from recyclable plastic)
Green Recycling
Coasters - Cutouts(made from recycled circuit boards)
Rain Saver - Blackwall (Even Greener)(Made from recycled plastic)
Leather Bound Journal – Natural History Museum
(made from reclaimed leather & recycled paper)
Green RecyclingGreen Recycling
Fig no :3
12
Fig no : 4
Some Green Products :
13Fig no : 5
14
Fig no : 6
E-Ticket : an IRCTC initiative
15
Example of Green Manufacturing
Murray Ohio Manufacturing Company Wanted to develop ways of reducing scrap metal.
Scrap metal was created because of the depth of the draw on the metal sheets and since the machines created severe deep draws it would tear and mar the metal sheets.
Murray Ohio Manufacturing Used a chlorinated oil with an additive of graphite to create heightened lubricity.
Oil was used as a stamping lubricant Looked at two different chemicals *Dry Coating Product *Coldkote
16
Products of Murray Ohio
Fig no : 7
17
Dry Coating Product Required machinery needed 400ft in length. Teflon coating that the product left made the sheets
more slippery. Cost of machinery was high. ColdKote System was 10ft in length. Non-oil lubricant Cost of machinery had a payback of six months. Coldkote the winner The benefits of Coldkote scrap metal went from 9% to 1/10 of 1%. Tool life increased 30-50%. Polish time went from 3-4days to once a day.
18
The removal of Coldkote was used with a warm alkaline bath. Coldkote becomes a solid compound once its applied therefore
reducing the amount of spilling and dripping. Non-oil lubricant reduces toxicity of company’s waste stream. A warm alkaline bath eliminates the need for any hazardous
cleaning agents. Decreased spilling and dripping allowed for cleaner facilities.
Coldkote Green Manufacturing
19
Summary
Green manufacturing is the elimination of waste through the production process
Companies must step up and take responsibility for their actions. Green manufacturing promotes innovative design. Processes such as JIT and zero emission should be exercised by
all companies.
20
Questions
21
THANK YOU !!!
22
References :
www.slideshare.comwww.wikipedia.comwww.google.comwww.seminartopics.com