GUJARAT WATER SUPPLY SEWERAGE BOARD …parthvalves.com 31/01/2019 4 M/s. Reliance Industries Ltd.,...

transcript

GUJARAT WATER SUPPLY & SEWERAGE BOARD

Govt. PSUs as Approved Vendors of GWSSB for Civil Materials

All the products (related to water supply & Sewerage schemes) manufactured by Government PSUs shall be accepted as Approved Vendors.

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

PE- 80 up to 315 mm up to PN -10

PE-100 up to 315 mm up to PN -10

90 to 315 mm & 355 to 1000 mm

PN - 2.5

50 to 315 mm & 355 to 1000 mm

PN - 4

40 to 315 mm & 355 to 1000 mm

PN - 6

32 to 110 mm & 125 to 180 mm &

200 to 710 mmPN -8

32 to 110 mm & 125 to 315 mm &

355 to 630 mmPN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 1650 to 315 mm & 355 to 1000 mm

PN - 6

40 to 180 mm & 200 to 900 mm

32 to 315 mm & 355 to 800 mm

PN -10

25 to 110 mm & 200 to 315 mm

PN -12.5

20 to 110 mm PN - 16

90 to 1000 mm PN - 2.550 to 1000 mm PN - 432 to 1000 mm PN - 632 to 180 mm PN -820 to 450 mm PN -1020 to 180 mm PN -12.5

50 to 1000 mm PN - 640 to 315 mm PN -8

32 to 500 mm & 800 mm

PN -10

20 to 180 mm & 200 to 500 mm

PN - 16

PE-80 20 to 400 mmPN - 2.5 to PN

PE-100 20 to 400 mmPN - 6 to

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE-80 & 100) Pipes (IS-4984) with ISI mark as per

Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval

Valid up to Date

Remarks

2M/s. Purma Plast Pvt.

Ltd., Bhiwadi

B-494, RICCO Industrial Area, Bhiwadi, Dist. Alwar, Rajasthan-301019

works@purmapipes.com

31/01/2019

PE-100

1M/s. Aerochem Piping Pvt. Ltd., Ahmedabad

Plot No. 258, Road No. 1/B, Phase-I, Kathwada, GIDC, Ahmedabad-382430

info@aeropipes.insales@parthvalves.com

31/01/2019

4M/s. Reliance Industries

Ltd., Hazira

Reliance Industries Ltd, Relpipe Plant, Village-Mora, Post-Bhatha, Hazira,

Surat-394510pravin.gupta@ril.com

31/01/2019

M/s. Emtelle India Limited, Sanand

(Formerly known as M/s. Parixit Industries LTd.,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,

Ahmedabad - 382 170ho@emtelleindia.com

joshi@emtelleindia.com

31/01/2019

Name changed

vide letter no. 28

dtd.12-2-2016

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16

50 to 1000 mm PN - 640 to 800 mm PN -832 to 800 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 110 mm PN -12.590 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 180 mm PN -12.520 to 180 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 180 mm PN -12.520 to 180 mm PN - 16

90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 710 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16

50 to 1000 mm PN - 640 to 900 mm PN -832 to 800 mm PN -1025 to 630 mm PN -12.520 to 500 mm PN - 16

PE- 80 40 to 140 mm PN - 6PE-100 50 to 180 mm PN - 6PE-100 32 to 160 mm PN -10

6M/s Krishna Plastics,

Rajkot

Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,

Rajkotsumopoly@rediffmail.comkrishna_mit5@yahoo.co.in

31/01/2019

PE-100

5M/s Time technoplast

Ltd. Silvasa

Survey No. 326/1/1 (Part) & 328, Unit-2, Dhodharoada, Village-Velugam,

Silavassa- U.T. of D & N. H. -396230

santosh.d@timetechnoplast.com

31/01/2019

9M/s. Mayfair Polymers Pvt. Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

smayfair50@yahoo.com31/12/2019 -

PE-100

7M/s kelvin Plastics Private Ltd.,Rajkot

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27

(Old-8B), Bhunava, Gondal, Rajkot-360311

mail@kelvinpipe.com

31/01/2019

PE-100

8M/s. Jain Irrigation

Systems Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,

Maharastrapipes@jains.com

pemktgws@jains.com

31/01/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 315 mm (Except 125 mm)

PN - 2.5

PN - 4

PN - 6

PN -10

PN - 6

PN -10

200 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1020 to 180 mm PN -12.5

110 to 180 mm PN - 1650 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1025 to 250 mm PN -12.5110 to 180 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 500 mm PN - 640 to 315 mm PN -825 to 315 mm PN -1025 to 200 mm PN -12.550 to 630 mm PN - 640 to 315 mm PN -832 to 630 mm PN -1025 to 200 mm PN -12.5

125 to 200 mm PN - 2.5125 to 200 mm PN - 440 to 200 mm PN - 632 to 200 mm PN -825 to 200 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 200 mm PN - 640 to 200 mm PN -832 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

PE-100

11M/s. Nimbus Pipes Ltd.,

Jaipur

SP2-123/123A, RIICO Industrial Area, Manda Near Kaladera, Chomu, Jaipur-

302023, Rajasthanadmin@nimbuspipes.com

31/12/2019 -

PE-100

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-

413 213, Maharastraujwal@kotharipipes.co.insales@kotharipipes.co.in

31/12/2019

PE-100

13M/s. Dutron Polymers

Ltd., Kheda

Bolck No. 642, N.H. 8, At-Hariyala, Kheda

sales@dutronindia.com

31/12/2019 -

PE-100

12M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,

Silvassa-396230kapil.thaker@kisangroup.com

kapil.pvc@gmail.comajit.dandekar@kisangroup.com

31/12/2019

PE-100

14M/s. Dolphin Poly Plast

pvt. Ltd., Rajkot

Plot No. G/1/C, Near Gate no. 2, Ta:- Lodhika, GIDC Metoda, Rajkot-360021

dolphinpipe31100@yahoo.cominfo@dolphinpipe.com

PE- 80

31/12/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 140 mm & 160 to 400 mm

PN - 2.5

50 to 140 mm & 160 to 400 mm

PN - 4

40 to 400 mm PN - 632 to 400 mm PN -825 to 400 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 400 mm PN - 640 to 400 mm PN -832 to 400 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1050 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1040 to 200 mm PN - 632 to 110 mm PN -832 to 110 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16

50 to 200 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1032 to 90 mm PN -12.5

50 to 90 mm PN - 16

500, 630 & 710 mm

PN - 2.5

50 to 110 mm, 355 to 400 mm, 500, 630 & 710

PN - 4

40 to 400 mm, 450, 500, 630 &

710 mm PN - 6

32 to 110 mm, 355 to 400 mm, 450, 500, & 630

25, 32 to 200 mm (Except 125 mm), 450, 500, & 630

PN -10

20 to 180 mm PN -12.550 to 500 mm &

630, 710 mmPN - 6

40 to 500 mm & 630, 710 mm

32 to 500 mm & 630, 710 mm

PN -10

25 to 400 mm PN -12.5

15M/s. Kisan Irrigation &

Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775rajesh.sharma@kisanirrigation.com

rajsharma_kisan@yahoo.comcustomercare@kisanirrigation.com

PE- 80

31/12/2019 -

PE-100

18M/s. Kriti Industries (India) Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP

pparmar@kritiindia.com

PE- 80

31/12/2019 -

PE-100

16M/s. Meghdoot Polypipes, Jaipur

G-1-198, Road No. 10, Bindayaka Industrial Area, Phase-II, Jaipur-302012

meghdootjaipur@gmail.com

PE- 80

31/12/2019

17M/s. Nataraj Polyplast

Pvt. Ltd., Rajkot(DELETED)

Survey no-168, Plot no. -23, Near Railway Over Bridge, Dhebar Road (South), Kothariya , Rajkot-360002

natrajpolyplast@yahoo.com

31-12-2017

DELETED due to

shifting of plant at different

location as informed by Agency vide letter dtd. 15-5-2017

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 450 mm PN - 2.550 to 450 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 450 mm PN -12.520 to 450 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 400 mm PN -12.520 to 315 mm PN - 1650 to 630 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 400 mm PN -12.520 to 315 mm PN - 1640 to 315 mm PN - 6

125 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1090 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1063 to 110 mm PN - 2.563 to 110 mm PN - 463 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 1663 to 125 mm PN - 6

125 mm PN -8125 mm PN -10

20 to 125 mm PN -12.520 to 125 mm PN - 16

20M/s. Noble Polymers,

Silvassa

Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :- Athal,

Silvassa-396230, UT of Dadra & Nagar Haveli.

noblepolymers@gmail.com

31/12/2019

PE -100

19M/s. Rungta Irrigation

Ltd., Ghaziabad

C-165, Bulandshahar Road, Industrial Area, Ghaziabad (U.P.)

Works@rungtairrigation.ininfo@rungtairrigation.in

31-12-2017

PE-100

21M/s. Elegant Polymers,

Rajkot

Elegant Polymers, At-Navagam (Bamanbore), Taluka:- Chotila,

Surendranagar.jkpatelkisan@hotmail.com

PE- 80

31/12/2018 -

PE-100

22M/s. Signet Industries

Ltd., Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar,

Madhya Pradeshumesh@groupsignet.com

ashish.butani@groupsignet.com

31/12/2018 -

PE-100

23M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,

Talod, Sabarkanthavinayakpolypipes@gmail.com

31/12/2018 -

PE-100

24M/s. Vishakha Irrigation

Pvt. Ltd., Ahmedabad

Block No. 792, Nr. Monik Ind. Sadaspur Road, Village:- Moti Bhoyan,

Kalol, Gandhinagarrajivraval@vishakhairrigation.com

prdn@vishakhairrigation.com

31/12/2018 -

PE-100

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 180 mm PN -12.550 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 180 mm PN -12.540 to 315 mm PN - 632 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN -1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 315 mm PN - 2.5125 to 315 mm PN - 6125 to 315 mm PN -8125 to 315 mm PN -1020 to 315 mm PN -12.520 to 315 mm PN -16200 to 315 mm PN - 6200 to 315 mm PN -8200 to 315 mm PN -10125 to 315 mm PN -12.520 to 315 mm PN -1690 to 400 mm PN - 2.550 to 315 mm PN - 440 to 400 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 400 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10

125 to 450 mm PN - 2.550 to 450 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 450 mm PN -12.520 to 400 mm PN - 1690 to 180 mm PN - 2.540 to 180 mm PN - 432 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -10

50 to 110 mm & 200 to 400 mm

PN - 6

40 to 110 mm & 200 to 400 mm

32 to 110 mm & 200 to 400 mm

PN -10

20 to 50 mm PN -12.520 to 50 mm PN - 16

30/06/2019

PE-100

PE-80 Survey no.3, Plot no. 76-79, B/h Kisan Dhydration, NH-27, Village-Bhojpara,

Taluka- Gondal, Rajkot-360311info@capitalpolyplast.com

M/s. Capital Polyplast (Guj.) Pvt. Ltd., Rajkot

PE-100

Plot no. G-922, Lodhika GIDC, Gate no.3, Kishan Gate Main Road, Kalavad

Road, Metoda, Rajkot-360 021

khyatipolymers@rediffmail.com

M/s. Khyati Polymers, Rajkot

PE-100

39-44 A, Industrial Area, Ratlam-457001, Madhya Pradeshjeetan.kipl@gmail.com

M/s. Kataria Plastics Pvt. Ltd., Ratlam

PE-100

30M/s. Miraj Pipes &

Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

jitender.singhal@mirajgroup.in

27M/s Krishna Plastics,

Rajkot

Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,

Rajkotsumopoly@rediffmail.comkrishna_mit5@yahoo.co.in

30/06/2019 -

PE-100

30/11/2019

28M/s. Jet Fibre India Pvt.

Ltd., Ahmedabad

Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm, (Bhudarpura) Mahij,

Kheda-387 120jetfibre@hotmail.com,contact@jetfibre.com

30/11/2019

PE-100

30/11/2019

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

90 to 315 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 500 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 180 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -10125 to 200 mm PN -12.5125 to 200 mm PN - 1650 to 315 mm PN - 6

125 to 200 mm PN -8125 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16

125 to 180 mm PN - 2.540 to 110 mm PN - 632 to 180 mm PN -825 to 110 mm PN -1020 to 110 mm PN -12.5

125 to 180 mm PN - 640 to 180 mm PN -832 to 110 mm PN -10

PE-100

R.S. No. 13/2P1, Plot no. 4, NH 27, Opp. Sadak Pipaliya Gate, Village:- Sadak Pipaliya, Ta. Gondal, Rajkotbalsonpolyplastfac@yahoo.co.in

M/s. Balson Polyplast Pvt. Ltd., Rajkot

36 06/03/2021

PE-100

30/06/202032M/s. Dinesh Irrigation

Pvt. Ltd., Jaipur

86B & 86B-II, Jhotwara Industrial Area, Jaipur-302012

dineshirrigation@gmail.comsales@dineshirrigation.com

30/11/2019

PE-100

31M/s. Mohit Polytech Pvt.

Ltd., Jaipur

F-139, Road no. 6, RIICO Industrial Area, Bindayaka, Jaipur-302012mohitpolytech112@yahoo.comsharwank@mohitpolytech.commarketing@mohitpolytech.com

PE-100

30/06/202098, Bahadarpur Road, Burhanpur,

Madhya Pradesh-450331vijay.prasad@texmopipe.com

M/s. Texmo Pipes & Products Ltd., Burhanpur

(MP)35

PE-100

30/06/2020

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-302022

shravan@tijaria-pipes.cominfo@tijaria-pipes.com

vikash@tijaria-pipes.com

M/s. Tijaria Polypipes Limited, Jaipur

34M/s. Sagar Polytechnik

Ltd., Chotila (Surendranagar)

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,

Surendranagarbalbhadra.jadeja@sagarpolymers.co

mdenish@sagarpolymers.com

PE-100

30/06/2020

Material Grade

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

Remarks

25 to 110 mm PN -12.520 to 110 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 450 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 800 mm PN - 2.550 to 800 mm PN - 440 to 800 mm PN - 6

32 to 500 mm & 630 mm

25 to 500 mm PN -1020 to 315 mm PN -12.550 to 800 mm PN - 640 to 800 mm PN -8

32 to 500 mm, 630 mm & 710

mmPN -10

25 to 315 mm PN -12.520 to 315 mm PN - 16

110 mm PN - 2.5110 mm PN - 4

40 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1090 to 315 mm PN - 2.550 to 315 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1640 to 315 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 16

06/03/2021

PE-100

41M/s. Sarovar Polymers

Pvt. Ltd., Rajkot

27/28, Atul Industrial Estate, Opp. Jyoti CNC & Pathak School, B/h. Akshar

Weight Bridge, Kalawad Road, Metoda GIDC, Rajkot-360021

info@sarovarpolymers.com

06/03/2021

PE-100

39M/s. Duke Pipes Pvt. Ltd.,

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,

Banaskanthadkpatel@dukeplasto.comprojects@dukepipes.com

40M/s. Polysil Irrigation

Systems Pvt. Ltd., Silvassa

Survey No. 137/1, Madhuban Road, Village:- Karad, Silvassa-396 230,

D & NHjjain@turfropes.com

polysilgujarat@polysilpipes.comramkumar_silvpipe@yahoo.com

06/03/2021

PE-100

06/03/2021

PE-100

Survey no. 146/P2, Behind Raymond Ltd., At & Po. Motiwada, Taluka:-

Killapardi, District:- Valsad -396125, Gujarat

bipin.modi@sangir.comproduction2@sangir.in

M/s. Sangir Plastics Pvt. Ltd., Valsad

PE-100

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,

Maharshtrainfo@parvatiudyog.com

M/s. Parvati Agro Plast, Sangli (Maharashtra)

37 06/03/2021

Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.

Size (mm) Class1 2 3 5 6 7 8

75 to 500 mm SN : 4 & 8

600 to 1000 mm SN: 2, 4, 6 & 8

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of DWC (HDPE) Pipes (IS-16098 Part -2) with ISI mark as per

Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)Sr. No.

Valid up to Remarks

1M/s. Alom Poly

Extrusions Ltd., Kolkata

Banganagar, Falta, 24 Parganas (South), West Bengal

mktg@alom.inalom@alom.in

dwc.admin@alom.in

30/06/2020

Size (mm) Class1 2 3 4 5 6 7

63 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 110 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm263 to 110 mm Class II- 4.0 kg/cm263 to 250 mm Class III- 6.0 kg/cm263 to 250 mm Class IV- 8.0 kg/cm263 to 250 mm Class V- 10.0 kg/cm2

M/s. Emtelle India Limited, Sanand (Formerly known as M/s. Parixit Industries LTd.,

Sanand)

Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand, Ahmedabad - 382 170ho@emtelleindia.com

joshi@emtelleindia.com

63 to 315 mm Class III- 6.0 kg/cm2 31/01/2019

Name changed

vide letter no. 28

dtd.12-2-2016

63 to 315 mm Class II- 4.0 kg/cm2

40 to 315 mm Class III- 6.0 kg/cm2

25 to 315 mm Class IV- 8.0 kg/cm2

63 to 315 mm Class V- 10.0 kg/cm2

6M/s. Jain Irrigation Systems

Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001, Maharastra

pipes@jains.compemktgws@jains.com

63 to 630 mm Class II to VI

( 4.0 to 12.5 kg/cm2)31/01/2019

Class II- 4.0 kg/cm2

Class III- 6.0 kg/cm2

Class V- 10.0 kg/cm2

7M/s. Mayfair Polymers Pvt.

Ltd., Himmatnagar

Mayfair Compound, N.H.No.8, Himmatnagar - 383 001

smayfair50@yahoo.comsmayfair50@gmai.com

31/12/2019 -

8M/s. Kisan Moulding Ltd.,

Silavasa

108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli, Silvassa-396230

kapil.thaker@kisangroup.comkapil.pvc@gmail.com

ajit.dandekar@kisangroup.com

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS-4985) with ISI mark as per Vendor Selection

Report submitted by Different TPI (As on dt. 4-4-2018)Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval

Valid up to Remarks

1The supreme Industries Ltd.,

At: Gadegaon, PO: Neri. Dist: Jalgaongk_saxena@supreme.co.in

31/01/2019M/s. The Supreme

Industries Ltd., Jalgaon

4 M/s. Polysil Pipes, Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D & N.H.

rohit@turfropes.comqcpp@tufropes.com

31/01/2019

2M/s. Super Industrial Corp.,

PatialaC-67, Focal Point, Patiala-147004

super67@ymail.com31/01/2019

5 M/s Sumo Polyplast Pvt.Ltd.Plot no. G-925, GIDC Lodhika, Kishan Gate,

Kalawad Road, At. Metoda, Rajkotsumopoly@rediffmail.com

31/01/2019

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

9M/s. Dutron Polymers Ltd.,

KhedaBolck No. 642, N.H. 8, At-Hariyala, Kheda

sales@dutronindia.com63 to 315 mm Class III- 6.0 kg/cm2 31/12/2019 -

Class I- 2.5 kg/cm2

63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm2

Class IV- 8.0 kg/cm2

63 to 315 mm Class V- 10.0 kg/cm2140 to 315 mm Class VI- 12.5 kg/cm2

13M/s. AKG Extrusion Pvt. Ltd.,

NoidaB-39, Sector-80, Noida, Uttar Pradesh-201305

akgextrusiions@gmail.com40 to 315 mm Class III- 6.0 kg/cm2 31-12-2017 -

15M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:- Sabarkantha-

383205stutipipes@gmail.com

Class III- 6.0 kg/cm2 31/12/2018 -

14M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215

vasanipvc@yahoo.com31/12/2019 -

16M/s. Signet Industries Ltd.,

Dhar (MP)

Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar, Madhya

Pradeshumesh@groupsignet.com

ashish.butani@groupsignet.com

31/12/2018 -

12M/s. Kriti Industries (India)

Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MPpparmar@kritiindia.com

31/12/2019 -

10M/s. Kothari Agritech Pvt.

Ltd., Solapur

Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-413 213,

Maharastraujwal@kotharipipes.co.insales@kotharipipes.co.in

31/12/2019 -

Infrastructure ltd., Mumbai

Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775

rajesh.sharma@kisanirrigation.comrajsharma_kisan@yahoo.com

customercare@kisanirrigation.com

31/12/2019 -

17M/s. Vinayak Polypipes Pvt.

Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol, Talod, Sabarkantha

vinayakpolypipes@gmail.com31/12/2018 -

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

18M/s. Swastik Krushi Polypipes Pvt. LTD.,

Dahegam

Plot No. 314, Zak Industrial Area, Vahelal Road, Village- Zak, Post- Paradhol, Dahegam,

Gandhingar-382330swastikpipe@yahoo.commail@swastikkrushi.com

Class III- 6.0 kg/cm2 31/12/2018 -

63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2

90 to 315 mm Class I- 2.5 kg/cm2125 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm2

125 to 180 mm Class IV- 8.0 kg/cm290 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2

30/06/2019Survey no.257, Plot No.23 to 28, NH-27,

Shapar (Veraval), Rajkotinfo@captainpipes.com

M/s. Captain Pipes Ltd., Rajkot

22M/s. Kataria Plastics Pvt.

Ltd., Ratlam

39-44 A, Industrial Area, Ratlam-457001, Madhya Pradesh

jeetan.kipl@gmail.com30/11/2019

M/s. Miraj Pipes & Fittings Pvt. Ltd., Udaipur

Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan

jitender.singhal@mirajgroup.in

30/06/2019 -

Survey No.149/1, Dholka-Kheda Road, Opp. GIDC Estate, Dholka-382225, Dist. Ahmedabad

amnawaz@astralcpvc.cominfo@astralcpvc.com

dixit.pandya@astralpipes.com

M/s. Astral Polytechnik Ltd., Ahmedabad

20M/s. Godavari Pipes Pvt.

Ltd., Rajkot

Survey No. 26 & 27, Plot no.6 To 10, N.H.8-B, Shapar (Veraval), Dist. Rajkot.

godavari@waterflo.in30/06/2019 -

30/11/201924M/s. Borana Industries,

Jodhpur

E-39, M.I.A. Basni 2nd Phase, Jodhpur, Rajasthan

sales@boranaindustries.com

30/11/2019

25M/s. Duke Plasto Tech.Pvt.

Ltd., Palanpur

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat

pppatel@dukeplasto.com30/06/2020

30/06/2020

Rajkot Ahmedabad N.H. No. 8-B, Wankaner Chowkdi, Survey no.552, Opp. Kuvadava High

School, Kuvadava, Rajkot-360 023info@idolpipe.com

M/s. Idol Plasto Pvt. Ltd., Rajkot

30/06/202027 M/s. Kamdhenu Pipe, Rajkot

Near Murakhda's Patiya, At- Murakhda, Taluka:- Upleta, Rajkot

kamdhenupipe2011@gmail.cominfo@kamdhenupipe.com

28M/s. Prince Pipes & Fittings

Pvt. Ltd., Dadra & Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D & N.H. -

396 191hrp@princepipes.cominfo@princepipes.com

30/06/2020

30/06/202029M/s. Elegant Polymers,

Rajkot

6, Rajputpara, Lohana Boarding, Rajkot-360 001

jkpatelkisan@hotmail.comamipatel.mit@gmail.com

Size (mm) Class1 2 3 4 5 6 7

Sr. No.

Valid up to Remarks

25 to 180 mm Class VI- 12.5 kg/cm2

90 to 180 mm Class I- 2.5 kg/cm263 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm2

90 to 315 mm Class I- 2.5 kg/cm2

36M/s. Apollo Pipes Ltd., Uttar

Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar,

Uttar Pradeshjyotikaul@apollopipes.com

63 to 315 mm Class III- 6.0 kg/cm2 06/03/2021

Class VI- 12.5 kg/cm2

90 to 250 mm Class II- 4.0 kg/cm290 to 200 mm (Excluding 180

mm)Class III- 6.0 kg/cm2

06/03/2021

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila, Surendranagarbalbhadra.jadeja@sagarpolymers.com

denish@sagarpolymers.com

M/s. Sagar Polytechnik Ltd., Rajkot

Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti Bhoyan, Tal. Kalol,

Dist. Gandhinagar.info@vishakhairrigation.comprdn@vishakhairrigation.com

M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad

39M/s. Guru Polyplast,

Palanpur

4/11 & 4/12, GIDC Chandisar, Palanpur, Banaskantha-385510

sahebpipe@gmail.com06/03/2021

37M/s. Parvati Agro Plast,

Sangli (Maharashtra)

UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli, Maharshtra

info@parvatiudyog.com06/03/2021

06/03/2021

Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27 (Old-8B),

Bhunava, Gondal, Rajkot-360311mail@kelvinpipe.com

M/s kelvin Plastics Private Ltd.,Rajkot

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001, Banaskantha

dkpatel@dukeplasto.comprojects@dukepipes.com

06/03/2021

30/06/202030M/s. Skipper Limited,

Ahmedabad

Survey No. 823, Village: Rajoda, Ahmedabad-Rajkot Highway, Taluka: Bavla, Ahmedabad-

382220pvcgujarat@skipperlimited.comvishal.shah@skipperlimited.com

33M/s. Aron Pipes Pvt. Ltd.,

Block No. 187, Plot No. 1 to 21, Kim-Mandvi Highway, Kim, Surat-394110purchase.aron@gmail.com

info@aronpipes.com

30/06/2020

31M/s. Tijaria Polypipes

Limited, Jaipur

SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-302022shravan@tijaria-pipes.com

info@tijaria-pipes.comvikash@tijaria-pipes.com

30/06/2020

32M/s. Texmo Pipes &

Products Ltd., Burhanpur (MP)

98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331

vijay.prasad@texmopipe.com30/06/2020

Size (mm) (NM) Class

1 2 3 4 5 6 740 to 200 mm RMS40 to 200 mm CM

150 to 200 mm CS200 to 400 mm CD

40 to 250 mm CM

150 to 250 mm CS

150 to 400 mm CS 40 to 400 mm CM40 to 400 mm RMS

250 to 400 mm PMS115 to 400 mm CD115 to 175 mm RDS

125, 175, 200, 250 mm

175, 200, 250 mm CS

100 to 150 mm , 175 mm & 200 mm

150 mm, 175 mm & 200 mm

125 mm, 150 mm & 200 mm

100, 125, 150, 175, 200 & 250 mm

150 , 175, 200 & 250 mm

125, 150, 175, 200 mm

150, 175, 200, 250 mm

100, 115, 125, 150, 175, 200, 250 mm

150, 175, 200, 250 mm

150 mm to 250 mm CS40 mm to 300 mm CM

100 mm to 300 mm CD40 mm to 200 mm RMS

150 mm to 400 mm CS

40 mm to 400 mm CM

7M/s. Stuti Pipes Pvt. Ltd.,

Sabarkantha

Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:-

Sabarkantha-383205stutipipes@gmail.com

31/12/2018 -

6M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)

Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215

vasanipvc@yahoo.com31/12/2019 -

5M/s. Kriti Industries (India) Ltd., Indore

13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP

pparmar@kritiindia.com31/12/2019 -

4M/s. Dutron Polymers

Ltd., Kheda

Bolck No. 642, N.H. 8, At-Hariyala, Kheda

sales@dutronindia.com31/12/2019 -

3M/s. Jain Irrigation

Systems Ltd., Jalgaon

Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,

Maharastrapipes@jains.com

pemktgws@jains.com

31/01/2019

1M/s. Super Industrial

Corp., PatialaC-67, Focal Point, Patiala-147004

super67@ymail.com31/01/2019

2M/s. Polysil Pipes,

Silvassa

Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D &

N.H.rohit@turfropes.com

31/01/2019

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS-12818) with ISI

mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address

Approved Size & Class Approval Valid up to

Date Remarks

8M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar

Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,

Talod, Sabarkanthavinayakpolypipes@gmail.com

31/12/2018 -

9M/s. Skipper Limited,

Kolkata

Ububeria Unit, N.H. No.-6, Village:- Madhabpur, PO:- Mahishrekha, PS:-

Uluberia, Howrah-711 303ujjal.bhattacharyya@skipperlimited.c

30/06/2019 -

30/06/2019Survey no.257, Plot No.23 to 28, NH-27,

Shapar (Veraval), Rajkotinfo@captainpipes.com

M/s. Captain Pipes Ltd., Rajkot

Size (mm) (NM) Class

1 2 3 4 5 6 7

Sr. No.

Date Remarks

150 to 350 mm CS

100 to 350 mm CM

150 to 300 mm CS40 to 300 mm CM

100 to 400 mm CD250 to 300 mm PMS100 to 300 mm RMS

40 to 250 mm CM

150 to 250 mm CS

40 to 250 mm RS

150 to 200 mm CS

100 to 250 mm CM

100 to 250 mm RS

150 to 250 mm CS

40 to 250 mm CM

175 to 300 mm CS100 to 300 mm CM100 to 300 mm CD200 to 300 mm PMS200 to 300 mm PDS100 to 175 mm RMS100 to 175 mm RDS150 to 250 mm CS40 to 250 mm

(Except 115 mm)CM

17M/s. Apollo Pipes Ltd.,

Uttar Pradesh

Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam

Budh Nagar, Uttar Pradeshjyotikaul@apollopipes.com

06/03/2021

Palanpur

Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,

Banaskanthadkpatel@dukeplasto.comprojects@dukepipes.com

06/03/2021

11M/s. Sagar Polytechnik

Ltd., Rajkot

Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,

Surendranagarbalbhadra.jadeja@sagarpolymers.com

denish@sagarpolymers.com

30/11/2019

12M/s. Duke Plasto

Tech.Pvt. Ltd., Palanpur

N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat

pppatel@dukeplasto.com30/06/2020

M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra

& Nagar Haveli

Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D &

N.H. - 396 191hrp@princepipes.cominfo@princepipes.com

30/06/202013

M/s. Texmo Pipes & Products Ltd., Burhanpur

98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331

vijay.prasad@texmopipe.com30/06/202014

Infrastructure Ltd., Dhar (MP)

Factory:- Unit II, Plot No. 91-110, Sector no. 3, Pithampur, Dhar, Madhya

Pradeshrajesh.sharma@kisanirrigation.com

rajsharma_kisan@yahoo.comcustomercare@kisanirrigation.com

30/06/2020

1 2 3 4 5 6

1M/s. Samshi Pipe

Industries Ltd., Vadodara

Plot No. E-9, Savli GIDC Estate, Manjusar, Savli, Vadodara-391165

hitesh patel@samshico.com

MS Helical Seam Submerge Arc Welded Pipe :-Size range 18' (457 mm) to 100" (2540 mm) and thickness 5 mm to 20 mm in length 6 mtr to 12 mtr.

31/01/2017

2M/s. Bhushan Steel Ltd.,

Raigadh

Nigan-savroli, Isamba Phata khopoli, Tal;- Khalapur, Dist:- Raigad, Maharastra-

410203kumar.ajit@bhusansteel.com

ERW Pipes of range:- Dia- 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.

31/01/2019

3M/s. Ratnamani Metals &

Tubes Ltd., Chhatral

Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV, Ahmedabad-Mehasana

Highway, Chhatral, kadi, Mehasana-382729

info.sp@ratnamani.com

OD:- 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:- 5 mm to 28 mm

31/01/2019

4M/s. Ratnamani Metals &

Tubes Ltd., Kutch

Survey No. 474, Bhimasar road, Vill. Bhimasar, Tal. Anjar, Dist. Kutch -370201

info.kutch@ratnamani.com

OD:- 457 mm to 2540 mm (18" to 100" )Wall thickness:- 5 mm to 20 mm

31/01/2019

5M/s. Jindal Saw Limited,

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road,

Tal: Mundra, Dist: Kutch-370415

jayesh.thakkar@jindalsaw.comsanjeev.chaudhary@jindalsaw.com

OD:- 457.2 mm to 2540 mm (18" to 100" )Wall thickness:- 6 mm to 25 mm

31/01/2019

6M/s. Asian Mills Pvt. Ltd.,

Ahmedabad

Asian Mills PVt. Ltd., Plot NO. 1, Phase-1, GIDC Chhatral, Kalol, Mehsana

info@asiansteels.com

(1) IS: 1239 (Part-1)2004:- 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589-2001:- 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270-2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410

31/01/2019

7M/s. Welspun corp ltd.,

Dahej (Bharuch)

Unit-I (Dahej Plant), Welspun Corp. Ltd., Village: Jolva & vadadla, Tal: Vagra, Dahej

Road, Bharuch, Gujarat-392 130

sourav_das@welspun.com

(1) M.S. Pipe from size :-457 mm to 1930 mm & thickness 5 mm to 14 mm(2) 3LPE/LPP coating for pipe size:- 4 inch to 64 inch OD(3) External coating FBE/CFBE for pipe size:- 4 inch to 64 inch OD(4) Internal liquid Epoxy for pipe size:- 20 inch to 64 inch ID

31/01/2019

8 M/s. PSL Ltd., Anjar

Village varsana, Survey no. 39,40,42, Bhachau - Bhimasha road/ Nr.

Gandhidham Varsana, taluka- Anjar, Kutch-370240

pslvarsana2@pslltd.co.in

(1) Helical Seam Submerged Arc Welded Pipes:- ( IS 3589; Grade 330 & 410 IS 5504);-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 5 mm to 25 mm(2) 3LPE, 3LPP, CWC, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, ICP, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 2 mm to 50 mm

31/01/2019

Approved Size & Thickness

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark as per Vendor

Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproval

Valid up to Date

Remarks

1 2 3 4 5 6

Approved Size & Thickness Sr. No.

Name of Agency Adress/E-mail AddressApproval

Valid up to Date

Remarks

9M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar,

Kutch-370110(1) sourav_das@welspun.com

(2) Sanjay_raghavan @ welspun.com

(1) Helical Seam Submerged Arc Welded Pipes:- (a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 4 mm to 25 mm(2) 3LPE, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 0.1 mm to 50 mm

31/01/2019

10M/s. Essar Steel India Ltd.,

Hazira

Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira road, Surat, Gujarat-

394270ameher@essar.com

gaurav.sharma1@essar.com

406 mm to 2540 mm in thickness 6 to 25.4 mm WT. 31/12/2019 -

M/s. Surya Roshni Limited, Kutch

(Formerly Known as M/s. Surya Global steel tubes

Survey No.188, Anjar-Mundra highway, Village:-Bhuvad, Kutch-370130

rajeshmittal@ho.surya.insurya_roshni@satyam.com

suryaglobalpipes@gmail.com

(A) MS ERW pipe:- 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:- From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410

31/12/2019

Name Changed

vide letter No.218

dtd. 4-4-2018

12 M/s. SAIL Bokaro Steel City, Bokaro, Jharkhand

M.S. pipe of IS 3589:-2001 (ISI mark) 406 mm to 1626mm in thickness 6 to 25.4 mm WT.

31/12/2019Recommended by

13M/s. Riddhi Steel &

Tubes (P) Ltd., Ahmedabad

83-84, Village- Piplaj, Pirana Road, Ahmedabad-382 427

info@riddhitubes.org

(1) M.S. ERW Steel Pipe conforms IS :1239: Part-1:2004- (Black & Galvanised) With ISI Mark - Size :- 15 to 150 mm NB(2) M.S. ERW Steel Pipe conforms IS :3589:2001- (Black ) With ISI Mark - Size :- 150 to 300 mm NB

30/06/2019 -

14M/s. Surindra Engineering Company Limited, Gandhinagar

Factory;- Block No.1517, Village;- Moti Bhoyan, Kalol-Khatraj Road, Kalol,

Gandhinagar-383721surindra@vsnl.com

Secoahd@yahoo.com

M.S. Pipe as per IS 3589-2001(1) Spiral Saw Pipes:- OD 16 inch to 100 inch with pipe thickness from 5 mm to 16 mm(2) L Saw Pipes:- OD 36 inch to 100 inch with pipe thickness from 6 mm to 16 mm

30/06/2020

1 2 3 4 5 6

1M/s. Welspun Corp Ltd, Anjar

Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar, Kutch-370110(1) sourav_das@welspun.com(2) Sanjay_raghavan @ welspun.com

(1) Hot Rolled Plates:- 8 mm to 140 mm thickness in all national & international Grades.(2) Hot Rolled Coils:- 6 mm to 25 mm thickness in all national & international Grades

31/01/2019

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Mild Steel Hot Rolled Plates & Coils as per Vendor Selection

Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & Thickness Approval

Valid up to date

Remarks

Size (mm) Class

1 2 3 4 5 6 7

1M/s. Jai Balaji Industries,

Burdwan (W.B)

Unit-3, Vill. Banskopa, P.O. Rajbandh, Dist. Bardwan, West Bengal-713212info@jaibalajigroup.com

80 to 1200 mm (Except 125 & 750

mm)K-7 & K-9 31/01/2019

2M/s. Jindal Saw Limited,

Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road, Tal: Mundra, Dist: Kutch-370415jayesh.thakkar@jindalsaw.comsanjeev.chaudhary@jindalsaw.com

80 to 1000 mm K-7 & K-9 31/01/2019

M/s. Srikalahasthi Pipes Ltd., A.P.

( Formerly known as M/s. Lanco Industries Ltd., AP)

Rachagunneri-517641, Srikalahasthi Mandal, Chittor District, APsplamd@srikalahasthipipes.comhomarketing@srikalahasthipipes.com

100 to 1100 mm ( Except 125 mm)

K-7 & K-9 31/01/2019

Name changed vide letter no. 299 dtd.17-10-2015

4M/s. Electrotherm (I) Ltd.,

Survey no. 325, 310 KM Stone, Nr. Tollnaka, Village:- Samakhiyali, Ta:-

Bhachau, Kutch-370140ho@electrotherm.com

pipe@electrotherm.com

80 to 1200 mm K-7 & K-9 31/12/2019 -

80 to 1000 mmK-7 , K-8, K-10 &

80 to 1100 mm K-9

M/s. Tata Metaliks Limited, Medinapur

(WB)(Formerly known as Tata Metaliks DI Pipes Ltd.,)

P.O.- Samraipur, Kharagpur, Dist.: Medinapur(West) -721301, West

Bengaljitendra.mishra@tmdipl.com

80 mm to 800 mm (Except 125 & 750

mm) K-7 & K-9 31/12/2019

Name changed vide letter no. 217 dtd.4-4-2018

7M/s. Rashmi Metaliks Ltd., Medinipore (WB)

Village:- Gokulpur, P.O. Shyamraipur, Dist. Paschim Medinipore, Pin-721 304, West Bengaldrk.prasad@rashmigroup.comsanjay.jolly@rashmigroup.com

80 to 1000 mm (Except 125 & 750

mm) K-7 & K-9 31/12/2019 -

5M/s. Electrosteel Castings

Ltd., Kolakatta

30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas (North)

jayesh.shah@electrosteel.comdpswaminarayan@electrosteel.com

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR

List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class Approval Valid

up to DateRemarks

Size (mm) Class

1 2 3 4 5 6 780 to 150 mm

(Except 125 mm)Class-10

Class-15

80 to 150 mm (Except 125 mm) & 200 to 600 mm &

700 mm

Class-20

80 to 150 mm (Except 125 mm) & 200 to 350 mm, 400 to 600 mm & 700

Class-25

80 to 150 mm , Class -1080 to 700 mm, & 800mm, 900mm,

1000 mmClass -15

80 to 700 mm & 900mm,

Class -20

80 to 700 mm & 800mm

Class -25

1M/s. Apurva Vinimaya Pvt.

Ltd., Ahmedabad

P.O. Digvijay nagar, Ranip, Ahmedabad-382470

avplmazza.sales@gmail.com31/12/2019 -

2A Infrastructure Ltd., Bhilwara (Rajsthan)

P.O. Hamirgarh-311025, Dist:- Bhilwara, Rajasthan

ail_ahd@yahoo.co.injaipur@kanoria.org

31/12/2019 -

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of A.C. Pressure Pipes (IS 1592-2003) with ISI mark

(Mazza Process) as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Valid up to Date

Remarks

Size (mm) Class Type

1 2 3 4 5 6 7 8

1M/s. Navkar Builders Ltd.,

Village- Sandhana, Block C.K.no:- 1160 & 1161A, Taluka-Matar, Khedanblrcchumepipe@gmail.com

300, 450, 500, 600, 900, 1000, 1200 &

1400 mmNP-3 & NP-4

Vertical Vibrated cast

31-12-2017 -

List of Approved Vendors of GWSSB for supply of RCC pipe (IS:- 458:1989) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Valid up to Date

Remarks

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Remarks

1 2 3 4 6 7

Ordinary Portland cement

53 grade

Portland Pozzolana cement

53 grade

Portland Pozzolana cement (Fly ash

based -15 to 35%)-

53 grade

43 GradeAs per IS 8112-

2013With ISI mark

Portland Pozzolana cement (Fly ash

based -15 to 35%)-

53 grade

Portland Slag cement -As per IS 455:1989

With ISI mark

4 M/s. Ultratech Ultratech cement, B-wing, 2nd floor, Ahura centre, Mahakali Caves road,

Andheri east, Mumbai-40009331/12/2019

Recommended by TCEL

2 M/s. ACC Ltd. ACC ltd., Cement House, 121,

Maharishi karve road, Mumbai-400020

31/12/2019

3 M/s. AmbujaElegant Business park, MIDC Cross

road-B, Off Andheri-Kurla road, Andheri East , Mumbai-400059

31/12/2019

List of Approved Vendors of GWSSB for supply of Cement (as per IS 269-2015) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt.4-4-2018)

1M/s. Saurastra Cement

Ltd., Porbandar

Saurashtra Cement Ltd., Nr. Railway Station, Ranavav- 360 560, Porbandarmanishsarupria@mehtagroup.com

dbjagetiya@mehtagroup.com

31/12/2019 -

5M/s. J. K. Laxmi Cement

Ltd., Kalol

Village:- Moti Bhoyan, Taluka:- Kalol, Gandhinagar-382721

lakshmi_cement@lc.jkmail.com31/12/2018 -

6M/s. Gujarat Sidhee Cement Ltd., Veraval

Gujarat Sidhee cement ltd., opp. Veraval Kodinar Highway, Veraval,

Junagadhmanishsarupria@mehtagroup.com

31/12/2018

7M/s. Hi-Bond Cement (India) Pvt. Ltd., Rajkot

Survey no. 315,316,317, Patidad Gomta Chowkdi, Village Patidad,

Taluka:- Gondal, Rajkotmgjadeja@hibondcement.commanager@hibondcement.comdymgr.bd@hibondcement.com

info@hibondcement.com

31/12/2018

Sr. No.

Name of Agency Adress/E-mail Address Type GradeApproval

Valid up to Remarks

1 2 3 4 6 7Ordinary Portland

cement 53 grade

43 Grade

9M/s. Tata Chemicals Limited, Devbhumi

DwarkaMithapur, Devbhumi Dwarka-361345

53 Grade 06/03/2021

30/06/20208M/s. Wonder Cement

Ltd., Chittorgarh (Rajasthan)

R.K. Nagar, Taluka- Nimbahera, District;- Chittorgarh, Rajasthanplant.nbh@wondecement.com

Approved Size & Class

Size (mm)

1 2 3 4 6 7

1M/s. Aashiana Rolling Mills Ltd., Ahmedabad

Survey No.136, Nr. Friends Ispat, Kerala GIDC, Bavla, Ahmedabad-

382220friendstmt@gmail.com

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 31/12/2019 -

2M/s. Electrotherm (I) Ltd.,

Survey No. 325, N.H.No. 8A, 310 KM stone, Nr. Toll Naka, Village:-

Samakhiyali, Ta.: Bhachchau, Kutch-370140

kush.paliwal@electrotherm.com

Fe 415, Fe 500 & Fe 550

8 mm to 36 mm 31/12/2019 -

3M/s. Vinayak TMT bars Pvt. Ltd., Dahegam

Survey No. 25/1, 25/2, 24/P, Barot na Mosampur, Bayad Road, Post. Sampa,

Dahegam-382305, Gandhinagarvinayak.tmtbars@gmail.com

Fe 415 & Fe 500 8 mm to 36 mm 31/12/2019 -

4M/s. Shree Parmeshwar

Steel Pvt. Ltd., Ahmedabad

220/E, Gujarat Vepari Maha Mandal, A.V. Ltd., Odhav, Ahmedabadsahil@parmeshwarsteel.com

Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D

8 mm to 32 mm 31/12/2019 -

5 M/s. TATA Steel Tata nagar, Jamshedpur, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

6 M/s. ESSARFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

7 M/s. SAIL Bokaro Steel City, Bokaro, JharkhandFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

8 M/s. JINDALFe 415, Fe 500 & Fe

5508 mm to 36 mm 31/12/2019

9M/s. Utkarsh Bars Pvt.

Ltd., Surendranagar

Plot no. 725, Bamanbore GIDC, Bamanbore, Taluka:- Chotila, Dist.

Surendranagarmarketing@aryagroup.co.innawal.m@aryagroup.co.in

Fe 415, Fe 500 8 mm to 32 mm (Except 22 mm)

31/12/2018 -

10M/s. Gallantt Metal

Limited, Kutch

Nr. Toll Gate, Village:- Samakhyali, Bhachau, Kutch.

gml@gallantt.com

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm (Except 18 mm & 22

mm)30/06/2019 -

11M/s. Akshar Ispat Ltd.,

Himmatnagar

Block No. 158, Nr. GEB Sub-Station, Nikoda Chokdi, At PO Bavsar,

Himmatnagarakshar_ispat@yahoo.in

Fe 415, Fe 500 & Fe 500 D

8 mm to 32 mm 30/06/2019 -

Fe 415, Fe 500 8 mm to 32 mm

Fe 415D, Fe 500D & Fe 550 D

8 mm to 32 mm (Except 18 mm )

List of Approved Vendors of GWSSB for supply of TMT/HSD Bars (IS 1786:2008) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

Recommended by

12M/s. Shreeyam Power and

Steel Industries ltd., Gandhidham (Kutch)

Plot no. 332, GIDC, Industrial Estate, Phase-2, Village;- Mithirahar, Taluka:-

Gandhidham, Kutch-370201ak_singh@spsil.in

30/11/2019

Approved Size & Class

Size (mm)

1 2 3 4 6 7

Sr. No.

Name of Agency Adress/E-mail Address Material GradeApproval

Valid up to Date

Remarks

13M/s. M.D. Inducto Cast Ltd.,Bhavnagar

survey no.144, Paiki 1 & 2, Nesada, Sihor, Bhavnagar

info@rudratmx.comvivek.tyagi@rudratmx.com

Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,

Fe 550 D, Fe 600

8 mm to 32 mm 30/06/2020

14M/s. Diamond TMT & Procon Pvt. Ltd., Bhavnagar

468 & 469-1/2, Village:- Sanodar, Talaja highway, Taluka"- Ghogha,

Bhavnagarmarketing@diamondgroup.co.in

info@diamondgroup.co.in

Fe 415, Fe 500 8 mm to 32 mm 30/06/2020

Size (mm) Class

1 2 3 4 5 6 7 8

1M/s. Kartar Valves Pvt.

Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013

rsj@kartarvalves.comtilak@kartarvalves.com

50 to 600 mmPN 1.0 &

1.6With ISI

mark31/01/2019

50 to 1200 mm PN 1.050 to 600 mm PN 1.6

50 to 1000 mm (SGI)

PN 1.0

50 to 600 mm (SGI)

PN 1.6

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

4M/s. Bharat Engineering

Works, Dhrangadhra

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-363310, Gujaratbharatengiworks@yahoo.com

50 to 600 mmPN 1.0 &

1.6With ISI

mark31/01/2019

5M/s. VAG Valves India Pvt. Ltd., Hyderabad

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,

Medak District-502307saleshyderabad@vag-group.com

50 to 600 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

31/01/2019

6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.

rdmulpardi@gmail.com50 to 1600 mm

PN 0.6 to 3.0

Without ISI mark

31/12/2019 -

7M/s. Hawa Engineering

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabad

hawaengineers@gmail.com25 to 1200 mm

PN 1.0, 1.6, 2.0 &

Without ISI mark

31/12/2019

Cast steel/S.G. Iron/ DI

(Without ISI Mark)

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

2M/s. Sachdeva Metal

works, Jalandhar

C-33, Focal Point Extension, Jalandhar City-144001

smw@rgindustriessachdeva.com31/01/2019

With ISI mark

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS-14846) as per Vendor Selection Report

submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Valid up to Date

RemarksISI Mark

31/01/2019Balitikuri, Bakultala, via Dasnagar,

Howrah-711113hsblt09@gmail.com

M/s. H.Sarker & Company, Howrah

3With ISI

-8M/s. Calsens Pvt. Ltd.,

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-

711101ho@calsens.com

With ISI Mark

31/12/2019

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

Up to 600 mm PN 1.0 Up to 300 mm PN 1.6Up to 1200 mm PN 0.6Up to 1500 mm PN 1.0 Up to 1300 mm PN 1.6

Up to 500 mm PN 2.0

50 to 900 mm PN 1.0

50 to 600 mm PN 1.6

11M/s. Bikaner Engineering

Works , Jaipur

F-445, Road No. 12, V.K.I. Area, Jaipur-302013

bewfoundries@hotmail.com50 to 300 mm 1.0 & 1.6

With ISI Mark

31/12/2019 -

50 to 600 mmPN 1.0 &

1.6With ISI

Mark31/12/2019 -

700 mmPN 1.0 &

1.6Without ISI

Mark30/06/2020

PD type Short Body

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

14M/s. Zoloto Industries,

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-

144026mktg@zolotovalves.com

50 to 400 mm -With ISI

mark31/12/2018 -

15M/s. Joshijampala

Engineering Pvt. Ltd., Satara

M-64, Additional M.I.D.C., Satara-415 004, Maharashtra

sales@joshijampala.comup to 400 mm

up to PN 1.6

Without ISI mark

31/12/2018

16M/s. Perfect valves Pvt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, Jalandhar-144013jasbir@perfectvalve.com

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

Mark31/12/2018

Pressure Rating

ammended vide letter no. 301 dt. 19-10-2015

17M/s. Fouress Engineering

(I) Ltd., Aurangabad

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148

ssk@fouressindia.comfeilbaroda@fouressind.com

Up to 750 mmUp to PN

1.6Without ISI

Mark31/12/2018 -

Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021

valve@gmengg.com

With ISI Mark

31/12/2019 -

10M/s. Upadhaya Valves

Manufacturers Pvt. Ltd., Kolkatta

P 280 Benaras road, Howrah-711108upadhayavalvesworks@gmail.com

sales@upadhayavalves.netinfo@upadhayavalves.net

With ISI Mark

31/12/2019

12M/s. Shiva Industries,

Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo

Road, Jhotawara, Jaipur-302012navinebus@yahoo.co.in

9M/s. Kirloskar Brothers

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,

Taluka-Shirpur, Dist. Pune, Maharastradevansu.makwana@kbl.co.in

kblin@kbl.co.inrajesh.nair@kbl.co.in

With ISI Mark

31-12-2017

SG Iron/ Cast steel

(without ISI Mark)

Without ISI Mark

13M/s. G.M. Engineering

Pvt. Ltd., Rajkot

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

18M/s. S & M Industrial Valves Ltd., Kolkata

Sadananda Industrial Estate, Balitikuri, Bakultala,

Howrah-711 113info@steammining.com

Up to 1000 mmup to PN

1.6Without ISI

Mark30/06/2019 -

19M/s. Sondhi

Industries,Jalandhar

C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab

sirvalve@gmail.com50 to 600 mm

up to PN 1.6

With ISI Mark

30/06/2019 -

20M/s. Shree Krishna Industries, Howrah

P-261/1, Benaras Road, Belgachia, Howrah-711 108

skivalves@gmail.com50 to 1200 mm

PN 1.0 & PN 1.6

With ISI mark

30/11/2019 -

Ltd., Ahmedabad

hawaengineers@gmail.comzafar@hawaengltd.com

1300 to 1600 mm

PN 0.6, PN 1.0, PN 1.6, PN 2.0, PN

2.5 & PN 3.0

Without ISI Mark

30/11/2019 -

Up to 900 mm PN 1.0With ISI

Up to 1200 mm PN 1.0Without ISI

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

2.5Without ISI

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

mark06/03/2021

300 to 1200 mm PN 1.0 &

PN 1.6 Without ISI

Mark06/03/2021

50 to 300 mmUp to PN

1.6With ISI

1.6Without ISI

50 to 1200 mmPN 1.0 &

PN 1.6 With ISI

2.0Without ISI

up to 800 mmUp to PN

1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.050 to 600 mm PN 1.6

With ISI mark

MH-6 Chamrail Near Kona Express

06/03/2021

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402

nkdalui@gmail.comnkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah

06/03/2021

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004

info@nvrfittings.commarketing@nvrfittings.com

M/s. Mac International, Jalandhar

22M/s. Kalpana valves

Manufacturing co. (P) Ltd., Howrah

Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113

kalpanavalves@yahoo.co.in30/06/2020 D/F

23M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105

balajivalveskol@gmail.com30/06/2020

30/06/2020Kashi pur, Das nagar, Howrah-711105

(WB)jupitervalve@gmail.com,

M/s. Jupiter Engineering Co., Howrah

24 C.I /D.I.

With ISI Mark

M/s. Sigma Flow Control India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403

stcworks@sigmaflow.in25

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

1.6Without ISI

MarkResilient Seated

50 to 1200 mm PN 1.0

50 to 600 mm PN 1.6

1.6Without ISI

30M/s. McWane Services Pvt. Ltd., Coimbatore

143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062

Sales@mcwaneservices.comUp to 1000 mm

PN 1.0 & PN 1.6

Without ISI Mark

06/03/2021 DI

1.6With ISI

1.6Without ISI

1.6With ISI

1.0Without ISI

50 to 300 mmPN 1.0 &

PN 1.6 With ISI

350 to 600 mmPN 1.0 &

PN 1.6 Without ISI

50 to 1200 mm PN 1.0With ISI

50 to 600 mm PN 1.6With ISI

600 mm Up to PN

2.5Without ISI

06/03/2021P-261/1, Benaras Road, Belgachia,

Howrah-711108skivalves@gmail.com

M/s. Shree Krishna Industries, Howrah

06/03/2021 G.T. Road, Bye Pass, Maqsoodan,

Jalandhar-144008industries.bir@gmail.com

M/s. Bir Industries, Jalandhar

06/03/2021

41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal

kamalavalves@rediffmail.comkamala1@vsnl.net

M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah32

06/03/202169A, Balitikuri Industrial Estate,

Howrah-711113sales@ivivalves.com

M/s. Indian Valve International, Howrah

With ISI mark

06/03/2021

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West

Bengalkolkata@durgavalves.com,

info@durgavalves.com

M/s. Durga Valves PVt. Ltd., Howrah

06/03/2021MH-6 Chamrail, Near Kona Express

Highway, Howrah-711323info@kejriwalcastings.com

M/s. Kejriwal Castings Ltd., Howrah

Size (mm) Class

1 2 3 4 5 6 7 8

Ltd., Jalandhar

50 to 600 mmPN 1.0 &

1.6With ISI Mark 31/01/2019

works, Jalandhar

smw@rgindustriessachdeva.com50 to 350 mm

PN 1.0 & 1.6

Without ISI Mark

31/01/2019

3M/s. H.Sarker &

Company, Howrah

Balitikuri, Bakultala, via Dasnagar, Howrah-711113

hsblt09@gmail.com50 to 600 mm

PN 1.0 & 1.6

With ISI Mark 31/01/2019

Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal, Medak District-502307saleshyderabad@vag-group.com

50 to 1000 mm (DI)

PN 1.0 & 1.6

Without ISI Mark

31/01/2019

Valsad (Plant -2)

PN 0.6 to 3.0

Without ISI Mark

31/12/2019As per IS 5312

(part 1 )

Ltd., Ahmedabad

hawaengineers@gmail.com50 to 600 mm

PN 1.0 & 1.6

Cast steel/S.G. Iron/ DI

(without ISI Mark)

50 to 300 mm PN 1.0

50 to 600 mm PN 1.6

Upto 800 mm PN 0.6

Upto 1500 mm PN 1.0

Upto 1500 mm PN 1.6

Upto 900 mm PN 2.0

Upto 1200 mm PN 3.0

9M/s. Bikaner

Engineering Works, Jaipur

bewfoundries@hotmail.com50 to 300 mm

PN 1.0 & 1.6

Without ISI mark

31/12/2019As per IS 5312

(part 1 )

50 to 300 mmPN 1.0 &

1.6Without ISI

mark31/12/2019

As per IS 5312 (part 1 )

350 to 600 mmPN 1.0 &

1.6Without ISI

mark30/06/2020

As per IS 5312 (part 1 )

Jaipur

Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo

Road, Jhotawara, Jaipur-302012navinebus@yahoo.co.in

S.G. Iron/ Cast Iron

7M/s. Calsens Pvt. Ltd.,

Howrah

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor

Selection Report submitted by Different TPI (As on dt.4-4-2018)

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Pune

Without ISI Mark

31-12-2017

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

Pvt. Ltd., Rajkot

valve@gmengg.com50 to 600 mm

PN 1.0 & PN 1.6

Without ISI mark

31/12/2019As per IS 5312

(part 1 )

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026

mktg@zolotovalves.com50 to 300 mm

Without ISI Mark

31/12/2018

13M/s. Joshijampala

sales@joshijampala.comUp to 250 mm

up to PN 1.6

Without ISI Mark

31/12/2018

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather

Complex, Jalandhar-144013jasbir@perfectvalve.com

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark 31/12/2018 -

15M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-560058info@fouressindia.com

mohanram@fouressindia.com

450 to 1800 mm

Up to PN 16 (16 bar)

Without ISI Mark

31/12/2018Single Door &

Multi door

16M/s. Flownix valves Pvt.

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114

flownixvalves@gmail.comUp to 600 mm

up to 24 kg/sqcm

Without ISI Mark

31/12/2018 -

up to 1200 mm

up to PN 1.6

Without ISI Mark

Dual plate check valve

up to 500 mmup to PN

1.6Without ISI

MarkSwing Type check valve

30/06/201917M/s. S & M Industrial Valves Ltd., Kolkata

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

150 to 300 mm PN 1.0

50 to 125 mm PN 1.6

350 to 400 mm Up to PN

1.6 Without ISI

PN 1.0 & PN 1.6

Without ISI Mark

30/11/2019

Ltd., Ahmedabad

650 to 1200 mm

PN 2.0, PN 2.5 & PN

Without ISI Mark

30/11/2019

1.6With ISI Mark

CI D/F Swing Check

Up o 1000 mm PN 1.0Without ISI

CI D/F Multi door Swing

22M/s. Shree Balaji

Industries, Howrah

balajivalveskol@gmail.comUp to 600 mm

Up to PN 1.6

With ISI Mark 30/06/2020CI D/F Swing

Up to 600 mm PN 1.0 &

PN 1.6With ISI Mark

up to 1200 mm

PN 1.6Without ISI

50 to 900 mmPN 1.0 &

PN 1.6Without ISI

40 to 300 mm -Without ISI

MarkDI Resilient

Seated

1.6With ISI Mark

1.6Without ISI

Up to 600 mm As per IS 5312

(part 1 ) Up to 1400

mm As per IS 5312

(part 2)

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark Single Door

Up to 1500 mm

UP to PN 1.6

Without ISI mark

Single/ Multi Door

Up to 600 mm PN 1.0 With ISI Mark

1.6Without ISI

50 to 300 mmPN 1.0 &

PN 1.6With ISI Mark

350 to 500 mmPN 1.0 &

PN 1.6Without ISI

50 to 600 mm UP to PN

1.6With ISI Mark

500 to 1000 mm

UP to PN 1.6

Without ISI mark

Sales@mcwaneservices.com06/03/2021

DISwing Check

69A, Balitikuri Industrial Estate, Howrah-711113

sales@ivivalves.com06/03/2021 Swing Check

Swing Check06/03/202128

MH-6 Chamrail, Near Kona Express Highway, Howrah-711323

info@kejriwalcastings.com27 06/03/2021

nkdalui@gmail.comnkdalui@cal2.vsnl.net.in

Up to PN 1.6

Without ISI Mark

06/03/2021

Swing Check 06/03/202125

Swing Check type

30/06/2020

23M/s. Jupiter Engineering

Co., Howrah

Kashi pur, Das nagar, Howrah-711105 (WB)

jupitervalve@gmail.com, 30/06/2020

M/s. Sigma Flow Control India Ltd., Kolkata

stcworks@sigmaflow.in24 06/03/2021

M/s. Mac International, Jalandhar

kalpanavalves@yahoo.co.in

Swing Check type

sirvalve@gmail.com

M/s. Sondhi Industries,Jalandhar

18 30/06/2019With ISI Mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

31M/s. Kamala Valves & Engineering Pvt. Ltd.,

Howrah

50 to 800 mmUP to PN

1.6Without ISI

mark06/03/2021 Swing Check

32M/s. Bir Industries,

Jalandhar

G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008

industries.bir@gmail.com50 to 300 mm

PN 1.0 & PN 1.6

With ISI Mark 06/03/2021 Swing Check

50 to 600 mm PN 1.0 &

PN 1.6With ISI Mark

06/03/202133M/s. Shree Krishna Industries, Howrah

P-261/1, Benaras Road, Belgachia, Howrah-711108

skivalves@gmail.com

Size (mm) Class

1 2 3 4 5 6 7 8

40 to 600 mm PN 1.0

40 to 300 mm PN 1.6

works, Jalandhar

smw@rgindustriessachdeva.com40 to 450 mm

PN 1.0 & 1.6

Without ISI mark

31/01/2019

40 to 2600 mm 150#Without ISI

mark31/01/2019

Class as per API Standard

40 to 2000 mmPN 1.0 &

PN 1.6With ISI Mark 31/12/2019 -

200 to 4000 mm (DI)

PN 1.0 & 1.6

Without ISI mark

31/01/2019 -

5M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka Khandala, District-

Satara-412801salesindia@deltechcontrols.com

apatil@deltechcontrols.com

80 to 2200 mm PN 10

Without ISI mark

(As per BS EN 593/API 609

Specification)

31/12/2019 -

Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujarat

rdmulpardi@gmail.comrdmultiples@gmail.com

50 to 1000 mmPN 0.6 to

3.0Without ISI

Mark31/12/2019

As per IS 13095/ BS 5155-593 / AWWA C 504

Valsad (Plant -2)

PN 0.6 to 3.0

Without ISI Mark

31/12/2019As per IS 13095/

BS 5155-593 / AWWA C 504

3M/s. GM Engineering ,

Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021

valve@gmengg.com

List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Jalandhar

31/01/2019With ISI mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

40 to 600 mm PN 1.0 With ISI Mark

Wafer Short, Double flangedCS/S.G. Iron/M.S. Fabricated/DI

40 to 300 mm PN 1.6 With ISI Mark

CS/S.G. Iron/M.S. Fabricated/DI Wafer Short

650 to 2000 mmPN 1.0 &

PN 1.6

Without ISI Mark

2100 to 2600 mmPN 1.0 &

PN 1.6

Without ISI Mark

( As per AWWA C504 )

40 to 300 mmPN 1.0 &

1.6Wafer Type

40 to 1200 mmPN 1.0 &

1.6Double Flange

upto 3800 mm PN 0.6

upto 3000 mm PN 1.0

upto 2700 mm PN 1.6

upto 2600 mm PN 2.0

upto 800 mm PN 2.5

upto 1200 mm PN 3.0

upto 650 mm PN 4.0

50 to 300 mmPN 1.0 to

Wafer Short (resilient Seated)

200 to 1200 mmPN 1.0 to

Double flange short, (resilient

Seated)

12M/s. Intervalve (India)

Ltd., Pune

94/1 Manjari, Off Soli, Poonawalla Road, Pune-412307

baroda@poonawallagroup.com40 to 2400 mm

PN 0.6, PN 1.0, PN 1.6

Without ISI mark

(As per IS 13095/ BSEN

593/API -609 / AWWA C 504)

31/12/2018CI, SGI (DI), M.S.

Fabricated

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-

144026mktg@zolotovalves.com

40 to 600 mm -Without ISI

Mark31/12/2018 -

14M/s. Joshijampala

sales@joshijampala.comup to 2800 mm

up to PN 1.6

Without ISI Mark

31/12/2018

SG Iron/ Cast steel

Without ISI Mark

31-12-2017

11M/s. Upadhaya valves

Ltd., Pune

31/12/2019

Ltd., Ahmedabad

hawaengineers@gmail.com31/12/2019

Howrah

CS/S.G. Iron/M.S.

Fabricated/DI Double flange

With ISI Mark

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather

Complex, Jalandhar-144013jasbir@perfectvalve.com

40 to 300 mm & 350 to 600 mm

PN 1.0 & PN 1.6

(I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-560058info@fouressindia.com

40 (40 Bar)

Without ISI Mark

31/12/2018

up to 900 mmup to PN

1.6Without ISI

Mark30/06/2019 -

40 to 300 mmup to PN

1.6With ISI Mark

350 to 700 mmup to PN

1.6Without ISI

19M/s. Dynamic Valves Pvt.

Ltd., Mumbai

R-353, Rabale MIDC, Navi Mumbai-400701

info@dynamicvalves.comUp to 1800 mm

up to PN 1.6

Without ISI Mark

30/06/2019 -

PN 1.0 & PN 1.6

Without ISI Mark

30/11/2019 -

350 to 600 mm PN 1.6

40 to 1200 mmPN 2.0, PN 2.5 & PN

2700 to 3000 mmPN 1.0 &

PN 1.6

Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

Jaipur-302012navinebus@yahoo.co.in

50 to 700 mmPN 1.0 &

PN 1.6Without ISI

mark30/06/2020

Up to 900 mm PN 1.0 With ISI mark

2.5Without ISI

1.6With ISI mark

1.6Without ISI

M/s. Rotex Manufacturers &

Engineering Pvt. Ltd., Thane (Maharashtra)

Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

sales-bby@rotexindia.comrotexdbl@rotexindia.com

16Without ISI

mark30/06/2020

40 to 1200 mm PN 1.040 to 2000 mm PN 1.6

2.5Without ISI

27M/s. Sigma Flow Control

India Ltd., Kolkata

stcworks@sigmaflow.in50 to 1500 mm

PN 1.0 & PN 1.6

Without ISI mark

06/03/2021

Co., Howrah

jupitervalve@gmail.com,

With ISI mark C.I./ D.I.30/06/2020

30/06/2020

30/06/202024M/s. Shree Balaji

Industries, Howrah

balajivalveskol@gmail.com

M/s. Kalpana valves Manufacturing co. (P)

Ltd., Howrah

kalpanavalves@yahoo.co.in23

M/s. Sondhi Industries, Jalandhar

sirvalve@gmail.com30/06/2019 -18

Ltd., Ahmedabad

Without ISI mark

-30/11/2019

Size (mm) Class

1 2 3 4 5 6 7 8

Sr. No.

Valid up to Date

RemarksISI Mark

1.6With ISI mark

1.6Without ISI

350 to 2000 mm PN 1.0 &

PN 1.6 With ISI mark CL-125/ CL-150

2.0Without ISI

80 to 1200 mmPN 1.0 &

PN 1.6With ISI mark

1.6Without ISI

markDouble Flange

40 to 1200 mmPN 1.0 &

PN 1.6

1400 to 2000 mm PN 1.6

2.0Without ISI

40 to 600 mmPN 1.0 &

PN 1.6 With ISI mark

700 to 2000 mmPN 1.0, PN 1.6 & PN

Without ISI mark

1.6With ISI mark

1.6Without ISI

1.6With ISI mark

1.6Without ISI

Jalandhar

PN 1.0 & PN 1.6

Without ISI mark

06/03/2021

50 to 1200 mm PN 1.0 With ISI mark50 to 600 mm PN 1.6 With ISI mark

2.5Without ISI

skivalves@gmail.com36

Howrah

06/03/202134

sales@ivivalves.com33 06/03/2021

M/s. McWane Services Pvt. Ltd., Coimbatore

32143/2A, Anna Nagar Road,

Neelambur, Coimbatore-641062Sales@mcwaneservices.com

06/03/2021 DI

info@kejriwalcastings.com

06/03/2021

With ISI mark06/03/2021

28M/s. Mac International,

Jalandhar

06/03/2021

06/03/202129

Size (mm) Class

1 2 3 4 5 6 7 8 9

15 to 50 mmPN 1.0 &

1.6With ISI mark

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

15 to 50 mmPN 1.0 &

1.6Without ISI

50 to 200 mmPN 1.0 &

1.6Kinetic Air

valveWithout ISI

32 to 200 mm (D.I.)

PN 1.0 & 1.6

Without ISI mark

31/01/2019

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

20 to 200 mmPN 0.6 to

Without ISI mark

20 to 300 mmPN 0.6 to

3.0Kinetic

Without ISI mark

As per AWWA C-

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report submitted by

Different TPI (As on dt.4-4-2018)

Sr. No.

Valid up to Date

RemarksISI MarkType

Ltd., Jalandhar

31/01/2019

31/01/2019C-33, Focal Point Extension, Jalandhar

City-144001smw@rgindustriessachdeva.com

M/s. Sachdeva Metal works, Jalandhar

31/12/2019

31/01/2019

Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-

363310, Gujaratbharatengiworks@yahoo.com

M/s. Bharat Engineering Works, Dhrangadhra

Valsad (Plant -2)

rdmulpardi@gmail.com

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

15 to 50 mmPN 1.0,

1.6, 2.0 & 2.5

S-1 & S-2Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

DS-2 Without ISI

markCS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Kinetic DK Type

Without ISI mark

CS/S.G. Iron/DI

25 to 200 mmPN 1.0,

1.6, 2.0 & 2.5

Double Acting

Temper Proof

Without ISI mark

As per AWWA C-

512-92CS/S.G. Iron/DI

Howrah

Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101

ho@calsens.com40 to 200 mm

PN 1.0 & 1.6

DS1, DS2 & DK

Without ISI mark

31/12/2019 -

upto 200 mmPN 16, PN

20 , PN 30

upto 250 mm PN 10

upto 200 mm PN 4.0

upto 40 mmPN 1.0 &

upto 50 mmPN 1.0 &

50 to 200 mmPN 1.0 &

1.6DS2 & DK

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

As per AWWA C -

Ltd., Pune

KineticWithout ISI

mark31-12-2017

9M/s. Upadhaya valves

With ISI mark

31/12/2019

10M/s. Bikaner Engineering

Works, Jaipur

bewfoundries@hotmail.com31/12/2019

Resilient Seated

SG iron/ Cast steel

Ltd., Ahmedabad

hawaengineers@gmail.com31/12/2019

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

15 to 80 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Temper

ProofWithout ISI

As per AWWA C -

25 to 50 mmPN 1.0 &

1.6Single Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Double Acting

Without ISI mark

40 to 200 mmPN 1.0 &

1.6Kinetic

Without ISI mark

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148

ssk@fouressindia.comfeilbaroda@fouressind.com

up to 300 mmUp to PN

Without ISI mark

31/12/2018 -

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114

flownixvalves@gmail.comup to 400 mm

Up to 24 kg/sqcm

-Without ISI

mark31/12/2018 -

Without ISI mark

30/06/2019 -

16M/s. Sondhi

sirvalve@gmail.comUp to 200 mm

Up to PN 1.6

-Without ISI

mark30/06/2019 -

skivalves@gmail.com25 to 200 mm - -

Without ISI mark

30/11/2019 -

15 to 40 mmPN 1.0 &

PN 1.6S1

25 to 50 mmPN 1.0 &

PN 1.6S2

40 to 200 mmPN 1.0 &

PN 1.6DK Type

40 to 200 mmPN 1.0 &

PN 1.6DS1

40 to 200 mmPN 1.0 &

PN 1.6DS2

15 to 200 mmPN 2.0 &

PN 2.5-

Without ISI mark

kalpanavalves@yahoo.co.inUp to 150 mm PN 1.0 -

Without ISI mark

30/06/2020

20M/s. Shree Balaji

Industries, Howrah

balajivalveskol@gmail.comUp to 200 mm

Up to PN 1.6

- With ISI mark 30/06/2020

Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra

sales-bby@rotexindia.comrotexdbl@rotexindia.com

Without ISI mark

30/06/2020

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,

Jaipur-302012navinebus@yahoo.co.in

31/12/2019

Pvt. Ltd., Rajkot

valve@gmengg.com31/12/2019

30/11/2019 -With ISI mark

Ltd., Ahmedabad

Jaipur

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

40 to 200 mmPN 1.0 &

PN 1.6S1, S2, DS1, DS2 & DK

With ISI mark -

2.5Temper

ProofWithout ISI

As per AWWA C -

India Ltd., Kolkata

stcworks@sigmaflow.in40 to 200 mm -

Temper Proof

Without ISI mark

06/03/2021As per

AWWA C -512

Jalandhar

Without ISI mark

06/03/2021

50 to 200 mmPN 1.0 &

PN 1.6- With ISI Mark

25 to 40 mmPN 1.0 &

PN 1.6-

Without ISI mark

50 to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

As per AWWA C -512

15 to 40 mmPN 1.0 &

PN 1.6S-1

25 to 50 mmPN 1.0 &

PN 1.6S-2

40 to 200 mmPN 1.0 &

PN 1.6DS-1, DS-2 ,

Temper Proof

(Kinetic Type)

Without ISI mark

As per AWWA C -

40 to 200 mmPN 1.0 &

PN 1.6DK Type With ISI mark

Without ISI mark

40 to 300 mm PN 1.0Temper

ProofWithout ISI

As per AWWA C -

Up to 200 mmPN 1.0 &

PN 1.6-

Without ISI mark

Up to 200 mmPN 1.0 &

PN 1.6Temper

ProofWithout ISI

DI (As per AWWA C -

15 to 25 mm PN 1.0 Single ActingWithout ISI

1.6DS1, DS2 &

KineticWithout ISI

Temper Proof

(kinetic)

Without ISI mark

1.6DS 1, DS 2 &

DKWith ISI mark

1.6Single & Double

Without ISI mark

1.6Temper

Proof Without ISI

06/03/2021As per

AWWA C -512

Howrah

M/s. McWane Services Pvt. Ltd., Coimbatore

Sales@mcwaneservices.com06/03/2021

06/03/2021

Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal

kolkata@durgavalves.com, info@durgavalves.com

27 06/03/2021

-69A, Balitikuri Industrial Estate,

Howrah-711113sales@ivivalves.com

26M/s. Kejriwal Castings

Ltd., Howrah

info@kejriwalcastings.com06/03/2021

With ISI mark

06/03/2021

30/06/202022M/s. Jupiter Engineering

Co., Howrah

Size (mm) Class

1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to Date

RemarksISI MarkType

Jalandhar

PN 1.0 & PN 1.6

Temper Proof

Without ISI mark

06/03/2021As per

AWWA C -512

15 to 200 mmPN 1.0 &

PN 1.6- With ISI mark 06/03/2021

2.5Temper

Proof Without ISI

mark06/03/2021

As per AWWA C -

M/s. Shree Krishna Industries, Howrah

skivalves@gmail.com32

Size (mm) Class1 2 3 4 5 6 7 8 9

15 mm to 600 mm

150# to 2500#

SluiceWithout ISI

15 mm to 600 mm

150# to 2500#

ConduitWithout ISI

upto 700 mm 150# -

Up to 500 mm

300# & 600#

Up to 100 mm

900# -

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road,

Jalandhar-144026mktg@zolotovalves.com

50 to 300 mm

- SluiceWithout ISI

mark31/12/2018 -

4M/s. Fouress

Engineering (I) Ltd., Banglore

Plot-2, Phase-II, Peanga Industrial Area, Banglore-

560058info@fouressindia.com

50 to 3600 mm

Up to PN 16 (16

bar)Knife Edge

Without ISI mark

31/12/2018 -

Up to 300 mm

Up To PN 1.6

Knife EdgeWithout ISI

mark30/06/2019 -

6M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

021india@orbinox.com

bonsae.india@orbinox.commarketingmanager.india@orbi

nox.com

50 to 1200 mm

- Knife EdgeWithout ISI

mark30/06/2019 -

Ltd., Ahmedabad

40 to 1000 mm

PN 1.0 & PN 1.6

mark30/11/2019 -

Co., Howrah

Up to 800 mm

PN 1.0 Knife EdgeWithout ISI

mark30/06/2020

as per MSS SP -81 / AWWA C520

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Gate Valves as per Vendor Selection Report submitted by

Different TPI (As on dt.4-4-2018)Sr. No.

Valid up to RemarksType ISI Mark

Class AS per API Standard1

M/s. GM Engineering , Rajkot

valve@gmengg.com31/01/2019

31-12-2017As per API 600(SG Iron/ Cast

steel)2

M/s. Kirloskar Brothers Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no.

252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune, Maharastradevansu.makwana@kbl.co.in

Without ISI mark

Size (mm) Class1 2 3 4 5 6 7 8 9

Sr. No.

Valid up to RemarksType ISI Mark

India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-

711 403stcworks@sigmaflow.in

40 to 1000 mm

-Resilient Seated

Without ISI mark

06/03/2021 -

Ltd., Howrah

MH-6 Chamrail, Near Kona Express Highway, Howrah-

711323info@kejriwalcastings.com

50 to 1200 mm

Up to PN 1.6

mark06/03/2021 -

11M/s. Durga Valves PVt.

Ltd., Howrah

Ichhapur road, Canal Side, Santragachi, Howrah-711 104,

W t B l

Up to 900 mm

PN 1.6 Knife EdgeWithout ISI

mark06/03/2021 as per MSS SP -81

Size Class1 2 3 4 5 6 7 8 9

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,

Gujarat.rdmulpardi@gmail.com

Up to 1500 x 1500 mm

PN 0.6 to 3.0

Sluice (Single faced

circular/Rectangular

Without ISI mark

31/12/2019

As per BS 5155-593/ AWWA C

2M/s. Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

info@jashindia.com

150 x 150 mm to 3000 x 5000 mm

- -Without ISI

mark31/12/2019 As per IS 13349

Up to 1200 x 1200 mm

- Sluice Without ISI

mark30/06/2019 -

4M/s. Bharat Industrial corporation, Ghaziabad (UP)

D-131, Industrial Area, Bulandshahr Road, Ghaziabad-

201 009, Uttar Pradeshbicghaziabad@gmail.com

Up to 2500 x 3000 mm

- SluiceWithout ISI

mark30/06/2019 As per IS 13349

Co., Howrah

Up to 2000 mm

III SluiceWithout ISI

mark30/06/2020 As per IS 13349

Ltd., Howrah

150 x 150 mm to 1500 x 1500 mm

Up to PN 1.6

SluiceWithout ISI

mark06/03/2021

Ltd., Howrah

West Bengalkolkata@durgavalves.com,

2400 mm x 2800 mm

- SluiceWithout ISI

mark06/03/2021 As per IS 13349

8M/s. Indian Valve

International, Howrah

sales@ivivalves.com

Up to 1200 mm x 1200

mm- Sluice

Without ISI mark

06/03/2021 As per IS 13349

Howrah

800 mm x 800 mm

- SluiceWithout ISI

mark06/03/2021 As per IS 13349

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Sluice Gate as per Vendor Selection Report submitted by TPI (As

on dt. 4-4-2018) Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Class

Type ISI MarkApproval

Valid up to Remarks

Size (mm) Class

1 2 3 4 5 6 7 8

6 mm to 700 mm

150# to 900#

Without ISI mark

31/01/2019Class AS per API

Standard

50 to 1500 mm

PN 1.6Without ISI

mark31/12/2019

Dual plateAs per API 594

Valsad (Plant-I)

Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujaratrdmulpardi@gmail.comrdmultiples@gmail.com

50 to 1000 mm

PN 0.6 to 3.0

Without ISI mark

31/12/2019Dual plate

As per API 594

1000 to 2400 mm

PN 0.6 to 3.0

Without ISI mark

Dual plateAs per API 594

600 to 1200 mm

PN 0.6 to 3.0

Without ISI mark

Multi Door

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road, Ahmedabadhawaengineers@gmail.com

50 to 2000 mm

PN 1.0, 1.6, 2.0 &

Without ISI mark

31/12/2019Dual plate

(Double Flange)As per API 594

upto 1500 mm

upto 1100 mm

upto 1500 mm

upto 900 mm

upto 600 mm

upto 750 mm

150# & 300#

upto 300 mm

upto 100 mm

Dual plateAs per API 594 (SG Iron/ Cast

steel)

Without ISI mark

Check valveBS:-1868

Rajkot

valve@gmengg.com

Valsad (Plant -2)

Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,

Gujarat.rdmulpardi@gmail.com

31/12/2019

Ltd., Pune

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253,

Kondhapuri, Taluka-Shirpur, Dist. Pune, Maharastra

devansu.makwana@kbl.co.inkblin@kbl.co.in

rajesh.nair@kbl.co.in

Without ISI mark

31-12-2017

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report

Sr. No.

Name of Agency Adress/E-mail AddressApproved Size & Approval

Valid up to Date

RemarksISI Mark

50 to 500 mm

PN 1.0 & PN 1.6

Without ISI mark

31/12/2019Dual Plate

As per API 594

600 to 700 mm

PN 1.0 & PN 1.6

Without ISI mark

As per API 594

up to 800 mm

up to PN 1.6

Without ISI mark

Swing Type

up to 1300 mm

up to PN 1.6

Without ISI mark

Dual plate

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar Road,

Jalandhar-144026mktg@zolotovalves.com

15 to 100 mm

-with ISI

mark31/12/2018 As per IS 778

9M/s. Sondhi

C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-

144004, Punjabsirvalve@gmail.com

Up to 400 mm

-Without ISI

mark30/06/2019

Dual Plate AS per API 594 &

10M/s. Orbinox India Pvt.

Ltd., Coimbatore

S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641

021india@orbinox.com

bonsae.india@orbinox.commarketingmanager.india@orbi

nox.com

50 to 800 mm

-Without ISI

mark30/06/2019 -

skivalves@gmail.com

50 to 700 mm

-Without ISI

mark30/11/2019

Dual Plate AS per API 594

Ltd., Ahmedabad

2100 to 2400 mm

PN 1.0 & PN 1.6

Without ISI mark

kalpanavalves@yahoo.co.in

Up to 600 mm

up to PN 1.6

Without ISI mark

AS per API 594 & 598

14M/s. Shree Balaji

Industries, Howrah

Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105balajivalveskol@gmail.com

Up to 600 mm

up to PN 1.6

Without ISI mark

AS per API 594 & 598

Co., Howrah

Up to 1400 mm

Up to PN 2.5

Without ISI mark

AS per API 594

India Ltd., Kolkata

Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-

711 403stcworks@sigmaflow.in

50 to 300 mm

-Without ISI

mark06/03/2021

Dual Plate AS per API 594

Jalandhar

Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-

144004info@nvrfittings.com

marketing@nvrfittings.com

50 to 450 mm

Up to PN 1.6

Without ISI mark

AS per API 594

18M/s. G.M. Dalui & Sons

(Pvt.) Ltd., Howrah

Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-

711402 nkdalui@gmail.com

nkdalui@cal2.vsnl.net.indaluisuman@gmail.com,

Up to 3000 mm

Up to PN 1.6

Without ISI mark

AS per API 594

Jaipur

Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara, Jaipur-302012navinebus@yahoo.co.in

C-2, MIDC industrial Area, Paithan, Dist. Aurangabad-

431148ssk@fouressindia.com

31/12/2018

Ltd., Howrah

50 to 1200 mm

Up to PN 1.6

Without ISI mark

AS per API 594

Ltd., Howrah

50 to 1400 mm

Up to PN 2.0

Without ISI mark

AS per API 594

Sales@mcwaneservices.com

50 to 700 mm

PN 1.0, PN 1.6 &

PN 2.5

Without ISI mark

06/03/2021DI Dual Plate

AS per API 594

22M/s. Indian Valve

International, Howrah

sales@ivivalves.com

50 to 1200 mm

Up to PN 1.6

Without ISI mark

06/03/2021 Dual Plate

AS per API 594

Howrah

50 to 800 mm

Up to PN 1.6

Without ISI mark

AS per API 594

skivalves@gmail.com

Up to 900 mm

Up to PN 2.5

Without ISI mark

AS per API 594

Approved Size

Size (mm)

1 2 3 4 5 7 8 9

Zero Velocity100 mm to 2400

Air cushion valve 100 to 300 mm -

Zero velocity valve (PSLC)

500 to 2350 mm -

Air Cushion valves (QRDA)

100 to 400 mm -

Zero Velocity Up to 2700 mmup to 30 kg./sqcm

Air cushion valve up to 400 mmup to 30 kg./sqcm

Zero Velocity Up to 1000 mm up to 2.5

Air cushion valve up to 300 mm up to 1.6

Zero Velocity Up to 1400 mm up to PN 1.6

Air cushion valve up to 300 mm up to PN 1.6

Zero Velocity Up to 1000 mm up to PN 2.5

Air cushion valve up to 200 mm up to PN 2.5

skivalves@gmail.com

06/03/20215M/s. Durga Valves PVt.

Ltd., Howrah

Co., Howrah

jupitervalve@gmail.com, 30/06/2020

M/s. Megha Engineering & Infrastructure Ltd.,

Hyderabad

Plot No. 34/B, IDA Jeedimetla, Hyderabad-500055, AP

rajgopal@meilgroup.cominfo@meil.in

31-12-2017 -

Ltd., Pune

Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,

Pune-412114flownixvalves@gmail.com

31/12/2018 -

List of Approved Vendors of GWSSB for supply of Water Hammer Devices (Zero Velocity Valves & Air cushion valves) as per Vendor Selection Report submitted by TPI (As on dt. 4-4-2018)

Sr. No.

Name of Agency Adress/E-mail Address Type of Valves ISI MarkApproval

Valid up to Date

Remarks

1M/s Jash Engineering Ltd., Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo

Hospital, sanwer Road, Indore-453111 (MP)

info@jashindia.com

31/12/2019 -

Sr. No.

Name of Agency Adress/E-mail Address Approved Size & ClassApproval

Valid up to Date

Remarks

1 2 3 4 5 6

1M/s. Cair Euromatic

Automation Pvt. Ltd., Ahmedabad

Plot No. 178/179, Shiv Shakti Estate, Nr. V-Trans, Narol Road, Ahmedabad-

382 405info@cairindia.in

cairvalve@gmail.com

(A) Rotary Electrical Actuators:- Rotary Electrical Actuator for AWWA Butterfly Valve Double flanged, High-Performance Butterfly valve, Ball vale, 2-way ball valve, 3-way ball valve, and rotary Electrical Actuator for 4-way ball valve, fire safe design ball valve, fabricated butterfly valve

(B) Multi-turn Electrical Actuators:- Multi turn actuator operated sluice valve double flanged, gate valve double flanged, knife-gate valve, globe valve, control valve

Item Range:- (i) Three phase, single phase electrical actuators quarter turn (WP & Ex proof) Torque range:- 35 NM to 5000 NM (ii) Multi turn electrical actuators (WP & Flame proof) torque range;- 100 NM to 24000 NM(iii) Single phase electrical actuators (Linear) torque range:-150 kgf to 2500 kgf

31/01/2019

2M/s. Rotork Control (I)

Pvt. Ltd., Chennai

28-B, Ambattur Industrial Estate (North) Chennai-

600098amit.galphade@rotork.co

mkumar.mahalingam@rotor

(A) Single Phase Actuator with electrically operated and remotely controlled quarter turn & multi turnCapacity:- 30 Nm to 300 Nm (3 kgm to 30 kgm)(B) Three Phase Actuators with electrically operated and remotely controlled quarter turn & multi turn Capacity:- 30 Nm to 1000 Nm (3 kgm to 102 kgm)

31/12/2019 -

3M/s. Auma India Pvt.

Ltd., Banglore

Plot no. 39-B Phase, Pennya Industrial Area,

Banglore-560058balachandramn@auma.co.

inncpatil@aumaindia.com

Electric Actuators:-(a) Range From 30 Nm to 1000 Nm(b) 2000 Nm to 16000 Nm with electronic control. (Optional)

31/12/2018 -

4M/s. Marsh Automation

Pvt. Ltd., Pune

98A/25A, Hadapsar Industrial Estate, Pune-411

013rsdeshpande@marshauto

mation.commarshautomation@gmail.c

omvikrant.sec@hotmail.com

Three Phase Electrical Actuators of Torque Output Upto:- 1000 NM

06/03/2021

GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Motorized Valve Actuators as per Vendor Selection Report

Size (mm) Class

1 2 3 4 5 6 7 8 9

Ltd., Jalandhar

Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-

144013rsj@kartarvalves.com

tilak@kartarvalves.com

Ball Valve15 to 100

mmCL-125 &

CL-250With ISI mark 31/01/2019

Ball Valve6 mm to 300

mm150# to 2500#

Ball Valve6 mm to 600

mm150# to

Globe Valve15 mm to 300 mm

150# to 900#

Strainer Valve15 mm to 300 mm

Plug valve15 mm to 200 mm

Needle Valve6 mm to 50

mm150# to

Floating Ball Valve 15 to 300

mm600#

Without ISI mark

AS per API 609

Trunnion Mounted Ball

up to 400 mm

600#Without ISI

AS per API 609

upto 600 mm

PN 0.2

up to 400 mm

PN 1.0

upto 200 mm125#

upto 500 mm150#

upto 200 mm300#

Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,

Maharastradevansu.makwana@kbl.co.

inkblin@kbl.co.in

rajesh.nair@kbl.co.in

Foot valveWithout ISI

mark31-12-2017

CI/ S.G. Iron / Cast steel As per IS:

Globe valveWithout ISI

mark31-12-2017

As per BS: 1873 ( CI/ SG Iron /

Cast Steel)

List of Approved Vendors of GWSSB for supply of Other Valves as per Vendor Selection Report submitted by Different TPI (As on dt. 4-4-2018)

Sr. No.

Date Remarks Type of Valves ISI Mark

Rajkot

Plot No.2632, GIDC, Lodhika, village- Metoda,

Rajkot-360021valve@gmengg.com

31/01/2019AS per API Standard

Without ISI mark

3M/s. Delval Flow

Controls Pvt. Ltd., Pune

GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka

Khandala, District-Satara-412801

salesindia@deltechcontrols.com

apatil@deltechcontrols.com

31/12/2019

Ltd., Pune

Pressure Relief valves/ Safety

Valves

Up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Pressure Reducing valve

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Float Valvesup to 600

mmPN 0.6 to

PN 3.0Without ISI

Pressure Sustaining Valves

up to 600 mm

PN 0.6 to PN 3.0

Without ISI mark

Ball valve15 to 100

mmWithout ISI

mark31/12/2018

Gun metal Gate valve, Globe valve

15 to 100 mm

With ISI mark 31/12/2018As per IS

7M/s. Perfect Valves PVt.

Ltd., Jalandhar

Waryana Industrial Complex, Sangal Sohal

Road, Adjoining Leather Complex, Jalandhar-144013jasbir@perfectvalve.com

Ball valve 1/2" to 4" Class 125 With ISI mark 31/12/2018AS per IS

9890:1981

Ltd., Ahmedabad

129, B/h. Kashiram Textile mill, Narol road,

Ahmedabadhawaengineers@gmail.com

zafar@hawaengltd.com

Foot valve15 to 600

PN 1.0. PN 1.6 &

PN 2.0

Without ISI mark

30/11/2019 -

Manpada Road, Near Bhopar Village, Dombivli (E),

Dist. Thane, Maharshtrasales-bby@rotexindia.comrotexdbl@rotexindia.com

Ball ValveUp to 600

mmUp to PN

21Without ISI

mark30/06/2020 -

Ltd., Howrah

Foot valve50 to 1200

mmup to PN

1.6Without ISI

mark06/03/2021

Pressure RElief valves

up to 200 mm

up to PN 1.6

Without ISI mark

Float Valvesup to 200

Without ISI mark

143/2A, Anna Nagar Road, Neelambur, Coimbatore-

641062Sales@mcwaneservices.co

Pressure RElief valves (Flow

Control Valve)

Up to 300 mm

PN 1.0 & PN 1.6

Without ISI mark

06/03/2021 DI

Ichhapur road, Canal Side, Santragachi, Howrah-711

104, West Bengalkolkata@durgavalves.com,

06/03/202111

5M/s. Aira Euro

Automation Pvt. Ltd., Ahmedabad

Plot no. 123-124, Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad-

380 028airaeuroautomation@gmail

31/12/2018

Jalandhar

Zoloto house, 11th Milestone, Lambra, Nakodar

Road, Jalandhar-144026mktg@zolotovalves.com

Howrah

41/2. "Q" Road, Belgachia, Howrah-711108, West

Bengalkamalavalves@rediffmail.c

omkamala1@vsnl.net

Float ValvesUp to 300

Without ISI mark

06/03/2021

Size (mm) Class

1 2 3 4 5 6 7 8

1 to 100 MLD -Fine & Course

Multi Rake Course Bar

As per customers Requirement

- Track rack screen

1M/s Jash Engineering Ltd.,

Indore (Unit-II)

Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo Hospital, sanwer

Road, Indore-453111 (MP)info@jashindia.com

List of Approved Vendors of GWSSB for supply of Different STP Items as per Vendor Selection Report submitted by TPI (As on dt. 4-4-2018)

Sr. No.

Approved Size & Class Approval Valid

up to Date Remarks

Name of Sub Items

Screen 31/12/2019

GUJARAT WATER SUPPLY SEWERAGE BOARD …parthvalves.com 31/01/2019 4 M/s. Reliance Industries Ltd.,...

Documents