Post on 05-Feb-2021
transcript
Heavy Duty Sealed Bearing Hinges and Commercial Hardware
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
www.nationwideindustries.com
Contact Customer Service at: info@nationwideindustries.com1
For each side of the hinge, you choose: 4Aluminum or Steel material 4Bolt-on or Weld-on application 4Black or Mill (unpainted) finish
** On this type of hinge, the mounting bracket is the weak point (not the bearings). Nationwide Industries steel yoke is 15% thicker than competitive products reviewed.
Hinge Features: 4Each hinge contains 2 sealed roller bearings
(no grease required) 4All hinges slotted for horizontal adjustability 4Rating: 2,500 lbs. per hinge based on factory dynamic
rating of bearings** 4Assembled in the U.S. 4Warranty: Lifetime on components and 5 years on bearings 4Unpainted steel hinges are zinc plated. 4Steel weld-on body fits round or square profiles 4All hinges sold individually but packaged 8/case.
HDBY-ABB-ABB 4Body: Alum, Bolt-on, Blk 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.5 lbs each
HDBY-ABB-AWM 4Body: Alum, Bolt-on, Blk 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 1.4 lbs each
HDBY-ABB-SBB 4Body: Alum, Bolt-on, Blk 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 3.0" 4Gap Max: 3.5" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each
HDBY-ABB-SWM 4Body: Alum, Bolt-on, Blk 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 1.9 lbs each
Body - the portion of the hinge (with bearings) that rotates
Yoke - the bracket portion which holds the body
* Black finish on aluminum and steel is e-coated.
Understanding the Part Number
Material: A = Aluminum S = SteelApplication: B = Bolt-on W = Weld-onFinish: M = Mill B = Black*
Body(Gate)
Yoke(Post)
HDBY-ABB-SWM
Alum Bolt-on Black Steel Weld-on Mill
Heavy Duty Body Yoke
Heavy Duty Sealed Bearing Hinges All Hinges have Horizontal Adjustability of approximately 1/2"
Contact Customer Service at: info@nationwideindustries.com
Heavy Duty Sealed Bearing Hinges
HDBY-ABM-ABM 4Body: Alum, Bolt-on, Mill 4 Yoke: Alum, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.5 lbs each
HDBY-ABM-AWM 4Body: Alum, Bolt-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 1.4 lbs each
HDBY-ABM-SBM 4Body: Alum, Bolt-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 3.0" 4Gap Max: 3.5" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each
HDBY-ABM-SWM 4Body: Alum, Bolt-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 1.9 lbs each
HDBY-AWM-ABB 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.4" 4Gap Max: 2.9" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.3 lbs each
HDBY-AWM-ABM 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Mill 4Gap Min: 2.4" 4Gap Max: 2.9" 4 Vertical Adjustability: 0.75" 4Height: 7.2" 4Weight: 1.2 lbs each
HDBY-AWM-AWM 4Body: Alum, Weld-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.4" 4Gap Max: 2.9" 4Hinge Height: 4.1" 4Weight: 1.1 lbs each
HDBY-AWM-SBB 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.3 lbs each
All Hinges have Horizontal Adjustability of approximately 1/2"
2
Contact Customer Service at: info@nationwideindustries.com
Heavy Duty Sealed Bearing Hinges
HDBY-AWM-SWM 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.5" 4Gap Max: 3.0" 4Hinge Height: 4.1" 4Weight: 1.6 lbs each
HDBY-SBB-ABB 4Body: Steel, Bolt-on, Blk 4 Yoke: Alum, Bolt-on, Blk 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.7 lbs each
HDBY-SBB-AWM 4Body: Steel, Bolt-on, Blk 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each
HDBY-SBB-SBB 4Body: Steel, Bolt-on, Blk 4 Yoke: Steel, Bolt-on, Blk 4Gap Min: 3.0" 4Gap Max: 3.5" 4Height: 6.5" 4Weight: 3.7 lbs each
HDBY-SBB-SWM 4Body: Steel, Bolt-on, Blk 4 Yoke:Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each
HDBY-SBM-ABM 4Body: Steel, Bolt-on, Mill 4 Yoke: Aluml, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.7 lbs each
HDBY-SBM-AWM 4Body: Steel, Bolt-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.5 lbs each
HDBY-AWM-SBM 4Body: Alum, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 2.7" 4Gap Max: 3.2" 4Hinge Height: 6.5" 4Weight: 2.3 lbs each
All Hinges have Horizontal Adjustability of approximately 1/2"
3
Contact Customer Service at: info@nationwideindustries.com
Heavy Duty Sealed Bearing Hinges
HDBY-SBM-SBM 4Body: Steel, Bolt-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Gap Min: 3.1" 4Gap Max: 3.5" 4Height: 6.5" 4Weight: 3.7 lbs each
HDBY-SBM-SWM 4Body: Steel, Bolt-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each
HDBY-SWM-ABB 4Body: Steel, Weld-on, Mill 4 Yoke: Alum, Bolt-on, Blk 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.0 lbs each
HDBY-SWM-ABM 4Body: Steel, Weld-on, Mil 4 Yoke: Alum, Bolt-on, Mill 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4 Vertical Adjustability: 0.75" 4Hinge Height: 7.2" 4Weight: 2.0 lbs each
HDBY-SWM-AWM 4Body: Steel, Weld-on, Mill 4 Yoke: Alum, Weld-on, Mill 4Body fits round or square profile 4Gap Min: 2.5" 4Gap Max: 3.0" 4Height: 4.1" 4Weight: 1.8 lbs each
HDBY-SWM-SBB 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Blk 4Body fits round or square profile 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each
HDBY-SWM-SBM 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Bolt-on, Mill 4Body fits round or square profile 4Gap Min: 2.8" 4Gap Max: 3.3" 4Hinge Height: 6.5" 4Weight: 3.0 lbs each
HDBY-SWM-SWM 4Body: Steel, Weld-on, Mill 4 Yoke: Steel, Weld-on, Mill 4Body fits round or square profile 4Gap Min: 2.6" 4Gap Max: 3.0" 4Hinge Height: 4.1" 4Weight: 2.3 lbs each
All Hinges have Horizontal Adjustability of approximately 1/2"
4
Contact Customer Service at: info@nationwideindustries.com
Heavy Duty Gate Hinges
Right Hinge
Left Hinge
NW6218 Mill (2")NW6218-BK Black (2")NW6218-25 Mill (2 1/2")
NW6189 4Aluminum 4Beveled corners, designed to be welded 4Brass bushings and heavy duty stainless
steel pin 4No grease required
Heavy Duty Steel Barrel Hinge
4 Zinc plated steel mounting plate. 4 Fits 2"or 2 1/2" size gate frame. 4Ships unassembled (weld block
to gate, then assemble) 4 12 each per case @ 40lbs
4Horizontal adjustability 4Has an aluminum block
for welding 4Acetal bushing 4Stainless steel hinge pin
Heavy Duty Block Hinge for Aluminum Gate
Heavy Duty Estate Gate HingeHeavy Duty Non Self-Closing Aluminum Hinge
NW6215R Black NW6215L Black
4Contains grease fitting 4Steel power coated 4 6 each per case @ 22lbs
NW6229 4 Zinc plated steel 4Sealed ball barrings 4No grease required
Large Heavy Duty Ball Bearing Hinge
4 4" tall 4 8 each per case @ 44lbs
Heavy Duty Estate Gate Hinge with Adjustability
NW6242-B-BK Black Bolt-on (bolts not included) NW6242-W-BK Black Weld-on (Special Order)
4 Fits 2" gate frames and posts 4" or larger 4Aluminum and stainless steel construction 4Great strength, and horizontal adjustability 4 8 each per case @ 28lbs
Rotating Nut DesignNW6318-20 (2") NW6318-20H (2") w/mounting holes NW6318-25 (2 1/2") NW6318-25H (2 1/2) w/mounting holes
2.003.25
1.36
3.25
.74
2.00
1.772.55
4.32
2.00
1.221.47.38
1.38
1.47
2.25
1.501.50
1.50
2.49
.852.01 1.05
max 6.50min 3.25
2.04 4.00
4 18 each per case @ 45lbs
2.672.022.00
.3752.50
4.00.25
1.63
NW216-26 Black NW216-36 Bronze NW216-56 White
4 Post flange: 5"(H) x 3 1/4"(W) x 3 1/4"(D) 4Gate flange: 2 3/8"(H) x 1 5/16"(W) x 2"(D) 4Gate flange will accommodate both 2" and 1" gate frame 4 20 each per case @ 34lbs
5
Contact Customer Service at: info@nationwideindustries.com
Commercial Drop Rods 24" NW6270-24BK Black NW6270-24HDG Hot Dip Galvanized 10/Case @ 46lbs
36" NW6270-36BK Black NW6270-36HDG Hot Dip Galvanized 10/Case @ 55lbs
48" NW6270-48BK Black NW6270-48HDG Hot Dip Galvanized 5/Case @ 36lbs
4Heavy duty 1” O.D. drop rod 4 Zinc plated, powder coated steel 4 Through bolt design 4Can be used on vinyl, wood, aluminum
or chain link gates
Flip LatchGreat for Dumpster Use!
NW6169 Black 4Commercial grade 4 Pad-lockable 4 Zinc plate steel with
black powder coated finish 4Stainless steel through-bolts 4 10 per case @ 37lbs
2.49
.50 max 2.75min .75
4.50
3.75 3.75
1.754.50
1.08
.50
Also available in a Pad Lockable version!NW6270L 4Padlocks not included
Latches, Keyless Locks, Drop Rods, Closers
Keystone® Panic LatchReplaces Panic Bar Applications
KPL-P2-BK Black 4Heavy duty commercial design 4Anti-tamper design 4Secure entry with 6 pin 4 Easy exit with large button 4 6 per case @ 18lbs
Meets Egress codes and specs. Check with your local codes to meet requirements.
Patent Pending
Shotgun™ Gate CloserControlled Closing Power to Avoid Gate SlammingSHOTGUN-BK BlackSHOTGUN-SC Satin Chrome
4One SKU closes any gate up to 250 lbs* 4Anti-slam technology 4Adjustable closing speed 4No oil therefore no leaks 4 10 per case @ 67lbs
* Tested on a 6' high, 6' wide gate. Needs a gate stop to stop at 90 degrees
Patented
Double barrel closing power
6
Keyless Locks 4Mechanical Combination Locks -
No electronics 4 Locks fit gate frames 1-3/8" to 2-3/8"
Two Sided Keypad KYPD-2D-BK Black KYPD-2D-SC Satin Chrome
1 Side Keypad & 1 Side Blank KYPD-2B-BK Black KYPD-2B-SC Satin Chrome
CornerStone® The Million Cycle Self-Closing Nylon Hinges
Keystone® Heavy Duty Key-Lockable Latches
Keystone® XeXternal Mount Key-Lockable Latches
AquaLatch®Magnetic Pool Safety Latches
OrnaMAG™Magnetic Metal Latches
V-Notch™Hinges and Latches
Manta™Magnetic Nylon Latches
Trident™Magnetic Gate Safety Latches
ArmorLatch™Magnetic Lever Latches
LockThru™Wood Gate Swing Latches
Nautilus™ Self-ClosingHinges
Shotgun™Gate Closers
GateShare™Multi-Lock Latch
Wood Fence Hardware
www.nationwideindustries.com
Hinges
Latches
Drop Rods
Handles
Accessories
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
Wood Fence Hardware
www.nationwideindustries.com
Hinges
Latches
Drop Rods
Handles
Accessories
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
Vinyl Fence & Railing HardwareHinges
LatchesMagnetic Pool Latches
Drop RodsHandlesBraces
Accessories
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
www.nationwideindustries.com
Vinyl Fence & Railing HardwareHinges
LatchesMagnetic Pool Latches
Drop RodsHandlesBraces
Accessories
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
www.nationwideindustries.com
www.nationwideindustries.com
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
HingesLatches
Magnetic Safety Locks Wheels and Trolleys
Cantilever Gate RollersFittings
Chain Link Gate Hardware
www.nationwideindustries.com
Phone: (813) 988-2628 • Fax: (866) 988-3465 • Email: info@nationwideindustries.com
HingesLatches
Magnetic Safety Locks Wheels and Trolleys
Cantilever Gate RollersFittings
Chain Link Gate Hardware
Keyless Gate Locks
» Mechanical Combination Locks - No Electronics » Passage Function May Be Set for Exiting Without Code » Easy Code Change » Codes Can be Set with Any Amount of Numbers » Dead Locking Spring Latch » Marine Grade Finish » Slip Clutch Design - No Damage to Lock if Handle
is Pushed Down too Hard » Our Lock Boxes Provide a Perfect Fit » Locks Fit Gate Frames 1-3/8" to 2-3/8" » Locks Never Need Lubrication
KYPD Style
Phone: (813) 988-2628 • Fax (866) 988-3465www.nationwideindustries.com • info@nationwideindustries.com
Two Sided Heavy DutyOrder in Left or Right, Black or Satin ChromeNW-1150DCL-BK LeftNW-1150DCR-BK RightNW-1150DCL-SC LeftNW-1150DCR-SC Right » Special Order » Requires Matching
Lockbox Below
Two Sided KeypadKYPD-2D-BK (Black) KYPD-2D-SC (Satin Chrome)
Two Sided1 Side Keypad/1 Side Blank KYPD-2B-BK (Black) KYPD-2B-SC (Satin Chrome)
Round Knob Styles Available NW-2230DC-BK (Black) or NW-2230DC-SC (Satin Chrome) » Double Sided Combo Locks
with Knobs
NW-2230DC-KO » Same as Above with Key Option
on One Side
One SidedNW-285-P-SC (Satin Chrome) » For use with Panic Bar
Panic BarNW-PB1100-SC (Satin Chrome)
Lock BoxesLockbox2C (Steel)Lockbox2C-AL (Aluminum) » For Use with KYPD Models
Lockbox3 (Steel)Lockbox3-AL (Aluminum) » For Use with NW-1150 Models
LIFETIMEMechanical Warranty
Keyless Gate Locks
» Mechanical Combination Locks - No Electronics » Passage Function May Be Set for Exiting Without Code » Easy Code Change » Codes Can be Set with Any Amount of Numbers » Dead Locking Spring Latch » Marine Grade Finish » Slip Clutch Design - No Damage to Lock if Handle
is Pushed Down too Hard » Our Lock Boxes Provide a Perfect Fit » Locks Fit Gate Frames 1-3/8" to 2-3/8" » Locks Never Need Lubrication
KYPD Style
Phone: (813) 988-2628 • Fax (866) 988-3465www.nationwideindustries.com • info@nationwideindustries.com
Two Sided Heavy DutyOrder in Left or Right, Black or Satin ChromeNW-1150DCL-BK LeftNW-1150DCR-BK RightNW-1150DCL-SC LeftNW-1150DCR-SC Right » Special Order » Requires Matching
Lockbox Below
Two Sided KeypadKYPD-2D-BK (Black) KYPD-2D-SC (Satin Chrome)
Two Sided1 Side Keypad/1 Side Blank KYPD-2B-BK (Black) KYPD-2B-SC (Satin Chrome)
Round Knob Styles Available NW-2230DC-BK (Black) or NW-2230DC-SC (Satin Chrome) » Double Sided Combo Locks
with Knobs
NW-2230DC-KO » Same as Above with Key Option
on One Side
One SidedNW-285-P-SC (Satin Chrome) » For use with Panic Bar
Panic BarNW-PB1100-SC (Satin Chrome)
Lock BoxesLockbox2C (Steel)Lockbox2C-AL (Aluminum) » For Use with KYPD Models
Lockbox3 (Steel)Lockbox3-AL (Aluminum) » For Use with NW-1150 Models
LIFETIMEMechanical Warranty
HDBY 05/17
Ask about our other Fence Hardware Catalogs
Wood Fence HardwareVinyl Fence Hardware
Chain Link Gate HardwareKeyless Gate Locks
Controlled Closing Power to Avoid Gate Slamming
Easy to Install &
Cost Effective
Hydraulic Gate Closers
GC4-BK (Powder Coated Steel - Black)GC4-SC (Stainless Steel - Satin Chrome Look)
GC3-BK (Powder Coated Steel - Black)GC3-SC (Stainless Steel - Satin Chrome Look)
GC3LD-BK (Powder Coated Steel - Black)GC3LD-SC (Stainless Steel - Satin Chrome Look)
» Hinge Arrangements In-line & Offset
» Maximum Opening of 110°
» GC4 Works with Gates 150-250 lbs. and 44" to 72" wide
» GC3 Works with Gates up to 75-175 lbs. and 40" to 64" wide
» GC3LD Works with Gates up to 50-125 lbs. and 36" to 52" wide
» Hydraulically Controlled Closing Speed
» 4 Tension Setting Options
Phone: (813) 988-2628 • Fax (866) 988-3465www.nationwideindustries.com • fence@nationwideindustries.com
GC2-BK (Black)
GC2-WH (White)
» Works with Gates up to 125 lbs.
» Works with Gates Widths up to 54"
» Adjustable Closing Speed and Adjustable Latching Speed
» 90° Hold Open Feature
» Maximum Opening of 90°
» Powder Coated Steel
GC1-BK (Black)
» Works with Gates up to 150 lbs.
» Works with Gates Widths up to 54"
» Adjustable Closing Speed
» Hold Open Feature
» Powder Coated Steel
Controlled Closing Power to Avoid Gate Slamming
Easy to Install &
Cost Effective
Hydraulic Gate Closers
GC4-BK (Powder Coated Steel - Black)GC4-SC (Stainless Steel - Satin Chrome Look)
GC3-BK (Powder Coated Steel - Black)GC3-SC (Stainless Steel - Satin Chrome Look)
GC3LD-BK (Powder Coated Steel - Black)GC3LD-SC (Stainless Steel - Satin Chrome Look)
» Hinge Arrangements In-line & Offset
» Maximum Opening of 110°
» GC4 Works with Gates 150-250 lbs. and 44" to 72" wide
» GC3 Works with Gates up to 75-175 lbs. and 40" to 64" wide
» GC3LD Works with Gates up to 50-125 lbs. and 36" to 52" wide
» Hydraulically Controlled Closing Speed
» 4 Tension Setting Options
Phone: (813) 988-2628 • Fax (866) 988-3465www.nationwideindustries.com • fence@nationwideindustries.com
GC2-BK (Black)
GC2-WH (White)
» Works with Gates up to 125 lbs.
» Works with Gates Widths up to 54"
» Adjustable Closing Speed and Adjustable Latching Speed
» 90° Hold Open Feature
» Maximum Opening of 90°
» Powder Coated Steel
GC1-BK (Black)
» Works with Gates up to 150 lbs.
» Works with Gates Widths up to 54"
» Adjustable Closing Speed
» Hold Open Feature
» Powder Coated Steel
Hydraulic Gate Closers
Innovative
Fence and Railing HardwareFor Vinyl, Metal and Wood Systems
HingesLatchesHandlesPost MountsChain Link Accessoriesand more…
Innovative
Fence and Railing HardwareFor Vinyl, Metal and Wood Systems
HingesLatchesHandlesPost MountsChain Link Accessoriesand more…
Innovative Fence and Railing Hardware
© 2017 Nationwide Industries, Inc. All Rights Reserved.Phone: (813) 988-2628 • Fax (866) 988-3465
www.nationwideindustries.com • info@nationwideindustries.com