Post on 05-Dec-2021
transcript
installed.E-LINE by DIRAK –
A brand of
DIRAK GmbH
Königsfelder Straße 1
D-58256 Ennepetal
+49 (0) 2333 837-0
eline@dirak.de
elinebydirak.com
MLRMechatronic Locks for Racks
MLEMechatronic Locks for Enclosures
MLIMechatronic Locks for Industrial Applications
MLUMechatronic Locks for Universal Applications
MLM
Mechatronic Locks Management
50
25
100
40
308
2730
25
50
100
2730
3440
308
MLR Mechatronic Locks for Racks
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
36
4,5
5070
5
100
5025
6015
530
8
40 2730
862
36
4,5
5070
5
100
5025
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
OffsetOFFSET
Ready for operation
Unauthorized Access / “Blocking Period”
Alarm
Handle open
Door open
Access authorized
“Green Period”
Configurable LED
Temperature okay
Temperature alarm
SCOPE OF SUPPLY
Swinghandle black plastic recess, zinc diecast handle mat chromeplated
Control unit plastic enclosure, can be fixed with screws or selfadhesive pad
Connection Cable 8-pin; 350 cm; UL-approved, 26 AWG stranded wire; RJ45 connector molded onto one end; crimped JST ZHR-8 connector on other end
An external power unit is not included in the scope of supply, but can be ordered as an accessory.
MULTI-POINT CAMS ROD LATCH
The swinghandle can be combined with a multi- point cam. Optionally, a round rod system can contribute to multi-point locking.
In the rod latch system, the revolving pull handle drives the mechanism in the rod latch housing. Flat rods run vertically to the doorframe.
The revolving pull handle drives the locking slide on the side of the handle. The laterally operated rod system is typical for the offset version.
MLR5000 KP MLR3000 KP
LED handle status ó
Keypad with LED keypad status ó
LED temperature status ó
LED sabotage alarm/ready for opening ó
Conditional Relay ó
Reader 125 kHz ó
Reader 13,56 MHz ó
Relay output (via screw terminal) 2,5 mm², can be connected from the plug-in side ó
Door contact input (screw terminal on plug-in side), 2,5 mm², terminal 1 and 2 ó
Interface Ethernet RS 485Storage space for transponder 1.000
Storage space PIN 1.000Storage for 500 events and 30 time profiles ó
ntegrated real-time clock with buffering up to 60 min. at 25 °C ó
Temperature range –20 °C … +70 °C ó
Sheet thickness plus powder-coating 1,5–2 mmTorque mechanism screw connection (top) 1,0/1,2 Nm
Torque cap screw connection (bottom) 0,4 NmPower supply ±10 % (DC) / standby current (DC) / max. current consumption (DC) 12 V / 45 mA / 440 mA
Stand-alone possibleIlluminated info field –
Power over Ethernet capable ó —
2.441
0.984
1.96
9
0.177
1.9693.93
7
2.75
6
1.417
0.197
1.1831.183 1.183
1.0631.063 1.063
0.3151.3391.575
12.1
26
6.10
22.
362
We offer a variety of mechanical adapters for all major rack manufacturers or we can design a customized solution.
25
50
100
2730
40
252
OffsetOFFSET
MLR Mechatronic Locks for Racks
40
252
2730
25
50
100
5
5070
�4,5
100
25
50
36
2730
8
6015
525
2
4062,8
5
5070
�4,5
100
25
50
36
2730
8
6015
525
2
4062,8
36
4,5
5070
5
100
5025
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
36
4,5
5070
5
100
50
25
6015
530
8
40 2730
862
Ready for operation
Unauthorized Access / “Blocking Period”
Alarm
Handle open
Door open
Access authorized
“Green Period”
Temperature okay
Temperature alarm
MLR5000 MLR3000 MLR1000
LED handle status ó ó
LED temperature status ó —
LED sabotage alarm ó —
Conditional Relay ó —
Reader 125 kHz ó —
Reader 13,56 MHz ó —
Relay output (via screw terminal) 2,5 mm², can be connected from the plug-in side ó —
Door contact input (screw terminal on plug-in side), 2,5 mm², terminal 1 and 2 ó —
Interface Ethernet RS 485 —
Storage space for transponder 2.000 —
Stand-alone possible —
Storage for 500 events and 30 time profiles ó —
Integrated real-time clock with buffering up to 60 min. at 25 °C ó —
Temperature range –20 °C … +70 °C ó ó
Sheet thickness plus powder-coating 1,5–2 mmTorque mechanism screw connection (top) 1,0 /1,2 Nm
Torque cap screw connection (bottom) 0,4 NmPower supply ±10 % (DC) / standby current (DC) / max. current consumption (DC) 12 V / 40 mA / 440 mA
Illuminated info field Color configurablePower over Ethernet capable ó — —
2.472
0.984
1.96
9
0.177
1.9693.93
7
2.75
6
1.417
0.197
1.575
9.9
21
6.10
22.
362
1.1831.183 1.183
1.063 1.063 1.0630.315
The revolving pull handle drives the locking slide on the side of the handle. The laterally operated rod system is typical for the offset version.
SCOPE OF SUPPLY
Swinghandle black plastic recess, zinc diecast handle mat chromeplated
Control unit plastic enclosure, can be fixed with screws or selfadhesive pad
Connection Cable 8-pin; 350 cm; UL-approved, 26 AWG stranded wire; RJ45 connector molded onto one end; crimped JST ZHR-8 connector on other end
An external power unit is not included in the scope of supply, but can be ordered as an accessory.
We offer a variety of mechanical adapters for all major rack manufacturers or we can design a customized solution.
MULTI-POINT CAMS ROD LATCH
The swinghandle can be combined with a multi- point cam. Optionally, a round rod system can contribute to multi-point locking.
In the rod latch system, the revolving pull handle drives the mechanism in the rod latch housing. Flat rods run vertically to the doorframe.
MLR Mechatronic Locks for Racks
CAT
CAT
CAT
ETH
ER
NE
T•••
•••
•••
CAT
CAT
12 V DC
–
–
+
+
CNCN
CN
READER MLR
READER MLR
BOX MLR
GATEWAY
HANDLE
HANDLE
HANDLE
SWITCH
SWITCH
Administration MLM Suite
Administration MLM Suite
LAN
CN
LAN OUTP. CONF.
•••
MLR5000 (KP)
Designed to facilitate convenient
central monitoring and
administration of decentralized
server racks. The swinghandles
are assigned unique IP addresses.
MLR3000 (KP)
Particularly well suited for rooms
containing a large number of
server racks (central server rack
structure). With just one IP address
it is possible to manage up to 32
swinghandles in one E-LINE by
DIRAK gateway.
MLR1000
The MLR1000 offers a hardware
interface, to facilitate integration in
the existing management. Following
activation of the potential-free
contacts or an input voltage of
12–24V DC , the system switches
to readiness for opening. Only after
a manual prompt at the lever does
this open.
Mains unit power supply
External power supply
Opening: potential-free
Handle status
GN
DD
OO
RN
/ON
/C
CO
MM
ON
GN
DD
OO
RN
/ON
/C
CO
MM
ON
Opening: 12–24 V DC
Solenoid status
CONTROL LINE
CONTROL LINE
CONTROL LINEexisting
management system
MAX. 32 SYSTEMS
DOOR CONTACT
DOOR CONTACT
White (Basic setting)
Light Blue
Pink
Dark Blue
Yellow
Green
Red
Without lighting
COLOR/LIGHTING INFORMATION FIELD
5086,590
15,51,535
� 5,3
50
14
5086,590
15,51,535
� 5,3
50
145086
,590
15,51,535
� 5,3
50
14
MLE Mechatronic Locks for Enclosures
CAT
CAT
READER MLE
ANTENNA
SWITCH
LOCK
Administration MLM Suite
•••
LAN
50 90 86,5
15,51,535
50
14
Ø 5,3
ready for operation
ready to open
opened
Alarm/ no authorized transponder
YE
LLO
W
GR
EE
N
WH
ITE
BR
OW
N
SCOPE OF SUPPLY
Antenna enclosure: zinc diecast, light gray powder-coated, front: plastic)
Control unit plastic enclosure, can be fixed with screws or selfadhesive pad
Connection cable 7 m control line, tool-free configurable RJ 45 connector (control line can be indepen-dently shortened)
CONNECTION
MLE5000 RFID ANTENNA
Interface TCP/IP, Ethernet, RS 232
RS 232 line (RXD, TXD, GDN, reader present, PC present), 38,400 Baud
Storage space for transponder (125 kHz) 2,000; 13,56 MHz on request / with Key Pad on request 1 master
Storage space for 500 events (ring memory) + 30 time profilesStand-alone possible
Relay output and door contact inputStandby current (DC) 40 mA
Max. current consumption (DC), RJ 12/Lock 1.4 A
Max. current consumption (when engaging the coupling) 3.0 A (DC), terminal 10–11
Multicolored status LED can be deactivatedMaterial Zinc diecast powder-coated and plastic
Temperature range – 20 °C ... +70 °CIntegrated real-time clock with buffering up to 60 min. at 25 °C
Watertight and dust-tight IP65
Nominal input voltage 12 V / 24 V / 48 V (DC) ±10 % 120 mA, (depending on lock connected)
Power over Ethernet capable
RJ 45-PLUG
MLE5000 RFID ANTENNA
Communication with the
MLE5000 RFID Antenna takes
place via TCP/IP protocol.
Each antenna receives a static
IP address and is reachable
in the network at all times.
The advantage: No separate
bus system is required for
the MLE5000 RFID Antenna
because the existing Ethernet
LAN is used here. This system
is therefore quick and easy to
install.
CONTROL LINE
CONTROL LINE
GN
DD
OO
RN
/ON
/C
CO
MM
ON
Y
ELL
OW
STA
TUS
G
RE
EN
STA
TUS
W
HIT
E S
OLE
NO
ID (+
)B
RO
WN
SO
LEN
OID
(-)
1.3780.059 0.610
1.96
9
0.55
1
0.209
1.96
9
3.40
6
3.54
3
ALTERNATIVELY:
R
ED
STA
TUS
BLA
CK
STA
TUS
OR
AN
GE
SO
LEN
OID
(+)
BR
AU
N S
OLE
NO
ID (-
)
ASSIGNMENT RJ12
20oder
22,5
46
105
–+
+-
MLE Mechatronic Locks for Enclosures
46
WHITE SOLENOIDBROWN SOLENOID
GREEN HANDLE CONTACT YELLOW HANDLE CONTACT
MLE1102
LED handle status on requestClosing “Or”
Power supply (DC) 12/24/48 V + 10 % 250 mA/140 mA/100 mAOpening Key Cylinder
Status request Proximity switch (potential-free)
Color light gray/black, powder-coated (customer-specific colors on request)
Wall/sheet thickness (plus powder-coating) up to 10 mmFor electronic opening power supply established
One suitable cylinderWatertight and dust-tight IP65
Vandalism class RC2
SCOPE OF SUPPLY
swing handle zinc diecast
MLE1102
The MLE 1102 can be
connected to all existing
management systems for
lock control. The positive/
negative contacts for the
electronic opening function of
the swinghandle are therefore
connected with the control
module of the respective
system. Together with the
transferred status of the lever
positions (open/closed) this
can enable further evaluations.
Whilst the management
systems usually only display
whether the cabinet door is
“open” or “closed”, with the
MLE1102 you have further
possibilities.
4.13
4
7.08
7
0.787
0.886
1.81
1
2.244 1.575 1.024
1.252
1.811or
or
BROWN SOLENOIDORANGE SOLENOID
BLACK STATUSRED STATUS
ALTERNATIVELY:
MLE Mechatronic Locks for Enclosures
53 24,5
30,5
3416
6
20oder �
� 22,5
105
46� 46
�
105
53 24,5
30,5
34
166
20oder �
� 22,5
105
46� 46
�
105
–+–+
20oder
22,5
46
105
46
MLE2100 MLE1200 MLE2200
Closing “And” “Or” “And”LED handle status ó – –Power supply (DC) 24 V ±10 % / 120 mA 48 V ±10 % / 120 mA 24 V ±10 % / 120 mA
Opening – Key / Cylinder Key / Cylinderfor electronic opening Power supply interrupted established interrupted
Status request Inductive sensor Proximity switch (potential-free) Inductive sensorColor* black powder-coated black powder-coated
Wall/sheet thickness 2 mm 2 mminstallable cylinder 1 2
Watertight and dust-tight (IP65) ó ó
Vandalism class RC2 ó ó
*Customer-specific colors on request
SCOPE OF SUPPLY
swing handle zinc diecast
MLE2100 und 2200
Simply integrate the MLE
2100/2200 in an existing
management system.
Connect the positive
and negative contacts
for the electronic
opening function of
the swinghandle with
the control module
of your authorization/
monitoring system. The
lever position (open or
closed) is signaled by
means of data transfer
and enables further
evaluations. In this way
the MLE 2100/2200
expands the status
control of conventional
management systems.
MLE1200
Connect the positive
and negative contacts
for the electronic
opening function of
the swinghandle with
the control module of
your authorization or
monitoring system. For
evaluation purposes, use
the status issued by the
swinghandle (open or
closed).
WH
ITE S
OLE
NO
IDB
RO
WN
GN
D (–
) Y
ELL
OW
SO
LEN
OID
(+)
BR
OW
N S
OLE
NO
ID G
RE
EN
GN
D (–
)
GR
EE
N H
AN
DLE
CO
NTA
CT
WH
ITE S
EN
SO
R (+
)
YE
LLO
W H
AN
DLE
CO
NTA
CT
GR
EY N
OT
US
ED
RO
SE S
EN
SO
R C
ON
TAC
T
1.811
4.13
4
6.53
5
6.55
5
0.787
0.886
1.81
1
2.087 2.0871.339 1.3390.965 0.984
1.201 1.220
or
or
MLI Mechatronic Locks for Industrial Applications
34 12,521
34
157
100
25
50
0,8
34 12,521
34
157
100
25
50
0,8
–
+
34 3421
0,8
157
12,5
5050
50
25
SCOPE OF SUPPLY
Swinghandle zinc diecast, black
Illuminates: Ready to open
MLI1101
Black plastic (PA6) singlecolorLED Ready for opening
Power supply 24 V ±10 % (DC), 220 mAStatus request: Proximity switch (potentialfree)
Plate cylinder“Or” closing
for electronic opening power supply establishedWall/sheet thickness 2 mm (plus powder-coating)
MLI1101
Connect the positive and ne-
gative contacts for the elec-
tronic opening function of the
swinghandle with the control
module of your authorization
or monitoring system. For
evaluation purposes, use the
status issued by the swing-
handle (open or closed). You
can detect at any time whether
a fault is present or sabotage
took place.
WHITE SOLENOIDBROWN SOLENOID
YELLOW HANDLE CONTACT
1.96
91.
969
1.96
9
6.18
1
0.984 1.339 1.339 0.492
0.031
0.827
GREEN HANDLE CONTACT
MLU Mechatronic Locks for Universal Applications
4013
7,8
30
28,8
124
6,3
1275
3
21
50
2518
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
6,3
6,3
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
40
137,
8
30
28,8
124
6,3
1275
3
21
50
25
18
10Ø
6M 7,9
Unauthorized Access / “Blocking Period”
Alarm
Handle open
Door open
Ready for operation
Access authorized
“Green Period”
Temperature okay
Temperature alarm
SCOPE OF SUPPLY
MLU reader Black plastic
Reader unit plastic enclosure, can be fixed with screws or self-adhesive pad
Connection cable 8-pole, 350 cm, UL strand AWG 26, one end with molded RJ45 connector, one end with crimped JST ZH connector ZHR-8
MLU5000 MLU3000
Interface Ethernet RS 485Nominal input voltage (DC) 12/24/48 V ±10 % (resp. depending on lock connected)
Storage space for transponder 2.000Stand-alone possible
LED lock status ó
LED sabotage alarm/ready for opening ó
Illuminated info field ó
Reader 125 kHz ó
Reader 13,56 MHz on requestRelay output (via screw terminal) 2,5 mm², can be connected from the plug-in side Relay contact: 12 V, 3 A, 60 W, 120 VA, terminals 3–5
Door contact input ó
Integrated real-time clock with buffering up to 60 min. at 25 °C ó
Temperature range –20 °C … +70 °C ó
Storage for 500 events and 30 time profiles ó
Standby current (DC) 40 mAMax. current consumption (DC), RJ 12/Lock 1,5 A
Max. current consumption (DC) on relay terminals 3 A (terminals 10–11)current-free open/closed can be configured depending on connected
Power over Ethernet capable ó —
MLU1000
Proximity switch status
for electronic opening voltage supply
interrupted or connected
independend of wall/sheet metal thickness
Color mat chrome-platedPower supply
12/24/48 + 10% (DC) with 140/90/50 mA
locking pressure ca. 200 kg
SCOPE OF SUPPLY
Lock zinc diecast, mat chromeplated
Control line 4 m
Locking stub
1.96
9
0.24
8
0.24
8
0.24
8
2.95
3
2.95
3
0.47
2
0.984
1.575
0.827
0.118
0.394
0.70
9
0.236
0.311
5.42
5
4.88
2
1.181
MLU Mechatronic Locks for Universal Applications
CAT
CAT
ETH
ER
NE
T•••
•••
CAT
CNCN
CN
READER MLU
READER MLUGATEWAY
ANTENNA
SWITCH
SWITCH
CAT
ANTENNA
LOCK
LOCK
Administration MLM Suite
Administration MLM Suite
–
+
LAN
CN
•••
•••
LAN OUTP. CONF.
CAT
MLU5000
Communication with the MLU
5000 takes place via the TCP/IP
protocol. Each reader receives
a static IP address and is
reachable in the network at all
times. No separate bus system
is required for the MLU 5000.
The MLU5000 system with the
associated Administration Suite
Software guarantees convenient
and reliable access monitoring.
MLU3000
Communication with the MLU
3000 takes place via the ELINE
by DIRAK-Gateway. It forms an
interface between the RS485
bus and the Ethernet/LAN
and performs the transfer and
conversion of the information
in the RS485 bus. The nodes
always form the junction for a
further MLU3000 reader unit.
One gateway can manage
a maximum of 32 MLU3000
and MLU 1000. The MLU3000
system with the associated
Administration Suite Software
guarantees convenient and
reliable access monitoring.
MLU1000
The MLU1000 can be connected to existing
management systems for lock control and
is therefore optimally suited for combination
with the MLU 3000/5000. The positive/
negative contacts for the electronic opening
function of the MLU1000 are therefore
connected with the control module of the
respective system. This can enable further
evaluations with the transferred status
(open/closed).
MAX. 32 SYSTEMS
WHITE SOLENOIDBROWN SOLENOID
GREEN REED CONTACT YELLOW REED CONTACT
GN
DD
OO
RN
/ON
/C
CO
MM
ON
Y
ELL
OW
STA
TUS
G
RE
EN
STA
TUS
W
HIT
E S
OLE
NO
ID (+
)B
RO
WN
SO
LEN
OID
(-)
CONTROL LINE
CONTROL LINEGN
DD
OO
RN
/ON
/C
CO
MM
ON
Y
ELL
OW
STA
TUS
G
RE
EN
STA
TUS
W
HIT
E S
OLE
NO
ID (+
)B
RO
WN
SO
LEN
OID
(-)
CONTROL LINE
CONTROL LINE
DOOR CONTACT
DOOR CONTACT
MLM
SWITCH
Administration MLM Suite
• • • • • • • • • • • • • • •
Mechatronic Locks Management
SWITCH
MLM-Client MLM-Server
MLM Administration Suite
RS 485 BUSTCP/IP
CAT
CAT
CAT
CAT
••••••
•••
Locking systems
MLR, MLE, MLU
MLM ADMINISTRATION SUITE
Seamless documentationServer Client Application
Display of the handle status in real-timeAutomated task management
Release time (permanently ready to open) / Lock time (no accidental re-patching on
the server possible during ongoing data backup)
Comprehensive alarm managementActive directory integration
Interfaces for 3rd party systemsFour-eyes principle for higher security levels
Assignment of rights to different usersPlanned access
Super user card (always authorized)
Colored configuration of the information field simplifies the management of rack groups
Management of device groups for better overview
Temperature monitoring
Data communication between the hardware, server and client is encrypted
(See previous page)