Post on 16-Dec-2015
transcript
Kverneland Visio 200
Product Information 2015
Kverneland Visio 200Disc harrow
• Single beam• Setting & Control
• Parallel adjustment & weight transfer
• Variosystem
• Visio-Care
• Bearings
• Scrapers
• Rear Roller
• Optional equipment & accessories
• Transport position
• Technical data
• Main advantages
Content
• 30 to 54 discs (with 235 mm disc spacing)
• 3,60 m to 6,30m working width
• Disc spacing : 235 or 275 mm
• Disc 660x6 scalloped/plain alternated as standard,
Strong single beam up to 330hp
• Disc 660 x 7, 710 x 7 mm , lobed 660 x 6 mm as an option
• Variosystem• 4 rear rollers options• Parallel and positive lifting
Single beamSingle beam main frame box section : 300x200x10 mm• Easy access to all working parts for maintenance• Good visibility on the machine during work for perfect
control• Low centre of gravity for good stability in transport• Hydraulic suspension to protect the frame in transport
position
Disc gangsDisc gangs staggered in
front and symmetric at rear • All working width
completely cut through
• Stable pulling line
++
Positive liftingPositive lifting• Carrier acting to the front to reduce rolling forces when lifting
Strong single beam design
• Strong junction armsStrong junction arms between main frame and disc gangs : high high distancedistance of 325mm between bearings with 60mm shaft
• Steel bushes with ball bearing at the top of the junction arms pivot
• Disc gang box section of 160 X 90160 X 90 x 7 mm
• High quality disc shaft sq.40mmdisc shaft sq.40mm• ReinforcementReinforcement bolted arms from 38
discs
325 325 mm
Stability
• Strong carrier designStrong carrier design- Axle 70 mm from 30 to 42 discs (235 mm disc
spacing), 80 mm for 46, 50 and 54 discs (235 mm disc spacing)
- 3 different wheels size options: 400/60x15,5, 480/45 x 17 and 520/50 x 17
• Depth controlDepth control done by the wheels with safe and accessible setting on a stop valve
• Easy access to the different setting.Easy access to the different setting.• All machine settings have been simplified for ease of
adjustment and accurate control.
Setting & Control
• Parallel lifting as standardParallel lifting as standard
• Weight transferWeight transfer adjustment on front cylinder draw bar
• Always in parallel position despite the roller weight, the hitch height and the tractor hydraulic flow. The parallel lifting is always correctly controlled by a restrictor valve
• Quick lifting of the machine (5 to 6 seconds) for a quick turn in the headlands
Parallel adjustment & weight transfer
• Independent front and rear gang angle adjustmentIndependent front and rear gang angle adjustment to
suit all soil types and conditions • Perfect levelling is possible without ridging, for added security against ridging inner discs can be fitted to the rear
disc gang
• Hydraulic foldingHydraulic folding for transport (2.50 m)
• In cab remote controlIn cab remote control (joystick) with view on rear and front angle scales (option)
Variosystem
• All disc gangs are protected by safety system : if the disc gang hits a stone, tree, etc…the special safety pin breaks
• Available with Variosystem
• The safety pins have 2 grooves for positive shear when the discs are over loadedVariosystem
Visio-Care: disc gang safety system
• Variosystem and the main frame are well protected• A set of 2 pins is available as standard• For hard soil, a set of reinforced axles are available as service kit
Visio-Care: disc gang safety system
• High qualityHigh quality cast iron bearing housing
• Double taperDouble taper roller bearings
• 4 seals4 seals
• Spring loaded as option
Bearings
• New scraperNew scraper with curved shape insuring good and efficient cleaning also in wet conditions
• Ensuring optimum inversion of the soil for a good incorporationincorporation of the residues
• Centralised or individualCentralised or individual scraper adjustment is possible
• Special scraper shape when inner disc 450 mm
Scrapers
• Hydraulic lifting and foldingHydraulic lifting and folding
• Possibility to work without rollers in wet Possibility to work without rollers in wet conditionsconditions
• Set of extra weight on drawbar as standard with Set of extra weight on drawbar as standard with roller roller (170 kg) for the parallel lifting and load (170 kg) for the parallel lifting and load transfer on the draw bartransfer on the draw bar
Roller frame
• AccumulatorAccumulator -to keep good and equal pressure on
the soil-follow ground contours-allowing the roller to run smoothly over obstacles
• SpacersSpacers to make depth and pressure adjustment on cylinder rod
• Safety sequence valve when unfolding Safety sequence valve when unfolding the rollerthe rollerit is impossible to unfold the roller before it is impossible to unfold the roller before opening the rear disc gangopening the rear disc gang
Roller settings
Cage roller Cage roller 550 mm 550 mm
• 10 bars for a good loading capacity• Effective crumbling action• Economic roller• For light to medium soil• Shaft diameter : 50 mm• Maintenance free bearings with 5 lips labyrinth sealing system + steel protection cover
Wide roller offer
Actiflex roller ø 580mm
•Intensive mixing effect•Self-cleaning effect•Low sensibility to blockages and stony conditions•Good compromise between recompaction and cost (160kg/m)•For all soil types•Maintenance free bearings with 5 lips labyrinth sealing system + steel protection cover•Low sensibility to wearing soil•Shaft diameter: 50 mm
Actipack roller 560 mmMake it as aggressive as you want
• Skid and knives between discs clean even in wet conditions. The knives are cutting bigger clods coming in the disc spacing of 12,5cm leaving a ready seedbed
• Knives pressure can be adjusted as high as the disc pressure to the ground to make equal pressure through the working width to achieve a nice and firm seedbed, and can also be put in a non working position to leave a rough ground surface with more clods (weather protected)
• Maintenance free bearings with 5 lips labyrinth sealing system + steel protection cover
• 3 different positions of the knives aggressiveness are proposed + 1 “OFF” position. They are adjusted thanks to the long spanner
• Can work with or without knives• No limitation in stony conditions• Discs with aggressive notched shape to ensure good driving
Wide roller offer
Actiring roller ø 540mm
• Light and active due to the skids between the rings that avoid blockages. • The knives are cutting bigger clods coming in the disc spacing of 12,5cm leaving a ready seedbed• Ring made with L profile.• Light and strong construction• Good recompaction (160 kg/m)• Shaft diameter: 50 mm• Maintenance free bearings with 5 lips labyrinth sealing system + steel protection cover
Unique knives pressure adjustment
• Knife pressure can be adjustable to ensure a fine crumbled seedbed or rough surface•3 different positions for the knives pressure are available. They are adjusted thanks to the long spanner delivered with the machine
Wide roller offer
Spring loaded bearings• to protect the disc gang and bearings against shocks in heavy and stony conditions
• Improve the penetration in dry and heavy soil
NB : The action with disc spacing 275 mm is limited because of the important working depth
Cross shaftCross shaft for better maneuverability and easy control
Ball couplingBall couplingø 80 mmø 80 mm
Pivoting pullingPivoting pullingeye ø 50 mmeye ø 50 mm
Fix eye Fix eye ø 50 mmø 50 mm
Options
Side deflectorsSide deflectorsEfficient when speed >9 km/h Bearing protectionBearing protection
Extra large wheelsExtra large wheels 520/50 x 17
Recommended from 5.30 m upwards working width
Inner discs in front Inner discs in front and/or rearand/or rear
Wheels Wheels 400/60 x 15.5 Wheels Wheels 480/45 x 17
Options
Hectare counterHectare counter Ideal for group of farmers or contractors to know the worked surface
Transport
Technical data
Number of discs 30 34 38 42 46 50 54Working width (m) 3,60 4,05 4,50 4,95 5,40 5,85 6,30Weight (kg) 3750 3990 4230 4460 4700 4940 5170Number of bearings 8 8 12 12 16 16 16Number of discs 30 34 38 42 46Working width (m) 4,10 4,60 5,20 5,70 6,30Weight (kg) 3955 4195 4442 4672 4920Number of bearings 8 12 12 16 16
175 200 225 250 275 300 33090 115 130 145 160 185 200
Rollers Cage roller Ø 550 mm, Actipack Ø 560 mm,Actiring ø 540 mm, Actiflex roller ø 580mm
Specifications Models
Scalloped/Plain 660/6 - 660/7 - 710/7 or lobbed 660/6Levelling discs 2Wheel size 400/60x15.5, large 480/45x17, extra large 520/50x17Maximum (HP)Minimum HP required
Disc spacing 235 mm
Disc spacing 275 mm
Longitudinal folding VariosystemType of discs
Main advantages
• Strong single beam up to 330 hp• Working width 3.6 to 6.3m• Transport width 2.5m• Wide range of rear rollers• Early emergence of volunteer cereal and weed seeds• Stubble mixing from 5 cm to 20 cm deep• Interruption of capillaries• Promotion of straw decomposition• Low fuel consumption thanks to optimum adjustment options• Load on the drawbar in working position and the opposite in transport position• Perfect levelling for seedbed preparation• Perfect cutting quality even in the middle of the machine (overlapping)• High flexibility of use• High outputs per hectare
Kverneland Visio 200 disc harrow:performance times X ... !
See ourMachines at workon YouTube
www.kverneland.com
visit us at www.kvernelandgroup.com
The Future of Farming