Kverneland Accord DG

Product Information 2016

Kverneland Accord DGHigh performance seed drill from 9 to 12m

Frame Concept

Transport

Folding process

Headland management

Depth adjustment

“Active on”

Coulter

Metering device

Hopper filling

Wheels

Track marker

Electronics

Technical data

Main advantages

DG 9.000 to 12.000 – Content

Main frame 100x180mm

Cross Shaft coupling CAT 3 N (3; 4 N)

Rear frame with coulter bar attachment

Independent Wing sections 2 x 4,5m (6m)

46cm Coulter offset

DG 9.000 to 12.000 – Frame concept

Central seeding depth adjustment

800mm flotation tyres

Flotation tyres for wing support

• Short and compact frame design

• Flotation tyres (800/45x26,5)

• Released for 40km/h Transport speed

• Double circuit air brakes as standard

• Lighting equipment

3m

DG 9.000 to 12.000 – Road transport

4m

DG 9.000 to 12.000 – Transport

Quick switch from transport to field position

1) Transport position

2) Folding of wing sections

3) Lowering of coulter bar and setting up of distribution heads

4) Ready to work

Complete sequence is controlled from the tractor cab!

DG 9.000 to 12.000 – Folding / Unfolding

321 4

Automatic transport lock

DG 9.000 to 12.000 – Folding / Unfolding

Quick switch from transport to field position

1) Transport position

2) Folding of wing sections

3) Lowering of coulter bar and setting up of distribution heads

4) Ready to work

Complete sequence is controlled from the

tractor cab!

• Complete coulter bar is lifted (high ground clearance for the coulters)

• Only main cylinder is acting whilst the coulter / wing pressure is released to the system

• Track markers changeover can be combined with the turning sequence easy operation

• Support wheels are just carrying (balancing) the weight of coulter bar wings

• For the next working pass all former settings are memorised

DG 9.000 to 12.000 – Head land position

• Central seeding depth adjustment at the main frame cylinder via stop valve

• Seeding depth is adjusted by lifting/lowering the coulter bar, the press wheel stays fix

• No additional adjustments on coulters / press wheels required

DG 9.000 to 12.000 – Seeding depth adjustment

Step less adjustable stop for valve

• Adjustment on one screw for 12m working width less risk of false adjustment!

DG 9.000 to 12.000 – Seeding depth adjustment

• Hydraulic adjustment of coulter pressure is linked to the side wing pressure

• Easy adaptation to changing soil conditions

• Step less adjustable up to 80 kg per coulter

• In combination with Focus 2 / Tellus it is adjustable via the terminal

DG 9.000 to 12.000 – “Active On”

• New design of coulter body weight reduction

• Up to 80kg coulter pressure good penetration

• Ø 410mm cutting disc

• Press wheel 330 x 50 as standard

• 460mm coulter clearance blockage free work

• Coulter distance 125mm

• Maintenance free bearings no greasing!

• No single adjustments at the coulter requested

DG 9.000 to 12.000 – CX Ultra coulter

Clod Board

• Hydraulic adjustable

• Optimum seed bed levelling

• Individual overload protected paddles

• Possible to set aside from operation

DG 9.000 to 12.000 – Combined seedbed preparation

• Precise Kverneland Accord metering devices

• Step less adjustable application rate from 2 – 330kg / ha

• Suitable for fine seeds as well as cereals

• Mechanical drive as standard; electric drive on ISOBUS 11783 as option

• Land wheel brake to avoid “overdosing” on head lands at high working speed

DG 9.000 to 12.000 – Metering devices

Mechanical drive

Electric drive

Radar equipment for machines with electrical driven metering device

• 6000 litre volume

• Loading step for save access to the hopper

• Easy hopper emptying device on each side

• Clear inside design: catwalk, sieves, steps…

• Control windows on different levels

DG 9.000 to 12.000 – Seed hopper

• Height adjustable low level sensors

• Easy access for refilling of seed

• Water and dust tight hopper cover

• 800mm flotation tyres on the carriage axle less tracks in the field

• Flotation tyres as well for single wing arms

DG 9.000 to 12.000 – Wheels

• Completely folded in for transport as well as for field operation

• Overload protection via shear bolt look and clamping 200 Nm

• Operation can be combined with head land turning sequence safes time and manual requirement

DG 9.000 / 12.000 – Track marker

• 90° headland turns possible even with twin tyres

• save and easy operation

DG 9.000 to 12.000 – Agility

• Clear machine overview from the tractor cab

• Visible working areas: Clod Board, Harrow section, metering devices, hopper, coulters…

DG 9.000 to 12.000 – Clearness

• All electronics are placed at the front of the machine water protected and good access

• Hydraulics, brakes and tramline distribution box in the rear between the wheels

• Safety lock and brake adjustment block at the left frame side in driving direction good access it will be used…

DG 9.000 to 12.000 – Clear control

SIGNUS IsoMatch Tellus

With mechanical metering device drive

DG - Seed drill control systems

IsoMatch Tellus Go

With electric metering device drive ISOBUS (ISO 11783)

DG – IsoMatch Tellus

The next generation universal ISOBUS Terminal – IsoMatch Tellus

• Two ISOBUS interfaces in one terminal• Multifunctional ergonomic design• ISOBUS Shortcut Button

The IsoMatch Tellus is the first ISOBUS terminal in

the world with the capability to operate different

machines on 2 screens through 1 terminal, without

the need to constantly toggle between screens.

Seed-flow monitoring

• For pneumatic seed-drills

• independent machine control system

• monitors the seed distribution tubes automatically

recognizing and reporting any blockages or errors

• easy localization and removing of troubles

Seed flow control system

General:

• Available in 9 and 12m working width

• 800mm flotation tires and double circuit air brake axle as standard

• 6.000 litres seed hopper volume

• Coupling with Cross Shaft Cat. 3 N

• Central seeding depth adjustment

• “Active on” for automatic pressure adjustment on coulters and side wings

• Possible to equip with Clod Board or double tine harrow section for optimum seed bed quality

• Seed rates from 2 – 330kg applicable

• Electric metering device drive on ISOBUS standard 11783 as option

Coulters:

• CX Ultra coulter with 12.5cm coulter distance and press wheel 330 x 50

• Up to 80kg coulter pressure

• New unique design

• Patented self cleaning CX disc pairing

DG 9.000 to 12.000 – Technical data

DG 9.000 to 12.000 – Main arguments

• High hectare performance

• Precise Metering

• Time and fuel saving

• High resale value

• Optimum coulter performance

• Easy setting of the machine

• Very good floating of the coulter bar wings

• Flexible in use of different conditions

• Different tramline systems for all needs

DG 9.000 to 12.000 – prepared for growth…

Kverneland Accord DG:High capacity seed drill !

 

 

 

See our

Machines

at work

on YouTube

www.kverneland.com

visit us at www.kvernelandgroup.com

The Future of Farming