Kverneland Accord Monopill

Product information 2016

Kverneland Accord MonopillPrecision drill

Content

Monopill S Mechanical (chain) drive

Monopill e-drive II

Electric driven

MONOPILL

•Introduction

•Frames

•Sowing unit

•Zero deposit principle

•Equipment

•Electronic

•Additinonals

•Summery

For sowing of

• pelleted Sugar Beet and Fodder Beet with a standardised seed diameter of 3.5 – 5mm

• Rapeseed (TKG 4,5 - 5g)

• Pelleted Chicory (2.75-3.25mm or Minipill)

•Row widths 45 - 56cm

•Working widths 3.00 –12.00m (6–24 rows)

Monopill

Sug

arbeet

Chi

core

e

Rapeseed

6 row, rigid frame• Working width up to 3.0m

rigid

• Power requirement from 40 kW

• Low lifting requirements

• Spring loaded and adjustable drive wheels 5.00 x 15 AS

• Lever change gearbox with 7 steps (optional e-drive II)

• Working speed -7.5 km/h

Monopill – Frames

Monopill S 6 row

12 row, rigid frame• Working width 5.40m – 6.00m

• Power requirement from 70 kW

• Gull-wing track markers

• 2 lever change gearboxes (optional e-drive II)

• Lengthwise transport device as option

Monopill S 12 row;

with integrated lengthwise transport device for road

transport

Monopill– Frames

18 row, rigid frame• Working widths 8.10m – 9.30m

• Power requirement from 100 kW

• 2 floating wings section which follow the ground

• Connection by CAT 3 (optional CAT 3N)

• 2 lever change gearboxes (optional e-drive II)

• Integrated hydraulic lengthwise transport device with tow hitch and wheels

• Quick and easy conversion for road transport by hydraulic move

Monopill e-drive II 18 row; with integrated lengthwise transport device

Monopill – Frames

24 row, rigid

• Working widths 10.80m – 12.00m; Power requirement from 110 kW

• Floating wing section to have a perfect ground following; Connected via CAT 3 (option CAT 3N)

• Only with e-drive II

• Gull wing folding disc track marker with electro-hydraulic control boxes for double acting control valve

• Quick and easy conversion for road transport with the integrated hydraulic lengthwise transport device

Monopill e-drive II 24 row; with integrated lengthwise transport device

Monopill e-drive II – Frames

12 rows, Parallel Hydraulic (PH) folding –Frame• Working widths between 5.40m – 6.00m

• Power requirement from 75 kW; Connection by CAT 3 / CAT 3N / CAT 2

• Parallel hydraulic foldable wing sections with electro-hydraulic control

• 3 lever change gearboxes (optional with e-drive II)

• Gull wing folding disc track marker

Monopill e-drive II 12 rows; 6m parallel hydraulic folding frame with Microgranular applicator

Monopill – Frames

18 rows, Parallel Hydraulic (PH) folding –Frame• Working widths between 8.10 – 9.00m

• Power requirement from 115 kW

• Electric drive only (Controlled by ISOBUS IsoMatch Tellus Terminal 11783 compatible)

• Hydraulic folding gull wing disc track markers

• Hydraulic folding to a transport width of 3m with electro hydr. control box as standard

Monopill e-drive II 18 rows;

parallel hydraulic folding

Monopill – Frames

Tandem sowing unit

Monopill – Rows

Mulch sowing unit with Monoflex press wheel

Standard sowing unit with Finger press wheel

• The seed disc is rotating through the second patented seed chamber

• The disc picks only one seed at a time, additional seeds are wiped off

• Due to the centrifugal force, the seed remains in the seed cell throughout its rotation

• With the seeding heart positioned deep inside the seeding coulter, the seed drop height is only 3cm

3cm

Monopill – Sowing Heart

20 cm

• The seed disc rotates counter clockwise (U), in opposite to the driving direction (F)

• With a seed distance down the row of 20cm, the circumference speed of the disc = drive forward speed => Zero deposit

• Standard seed spacing of 18 - 24cm with seed disc A4

• Up & down movements of the parallelogram have no effect on the seed disc/spacing due to a specially designed chain guide

Zero deposit

Monopill – Sowing Heart

1 Parallelogram

2 Depth adjustment

3 Seed hopper

4 Front wheel

5 Seed coulter

6 Sowing heart

7 Intermediate press wheel

8 Coverer

9 Rear press wheel (Monoflex)

Monopill e-drive II – Standard Sowing Unit

689 7

13

4

2

5

1 Double cutting disc

2 Coulter extension

3 Spring loaded intermediate press wheel

4 Disc coverer - spring loaded

5 Rear press wheel (Monoflex)

6 Spring load for sowing row up to 50 kg

2 1345

Monopill e-drive II – Mulch Sowing Unit6

Monopill S – Mechanical Drive• Working widths between 3.00m - 9.00m

• The basic element with chain driven sowing heart for normal & mulch seeding

• Depth adjustment in steps of 0,5cm

• Integrated ball bearing drivelines into the parallelogram linkage for a consistent seed disc

turning

• Visus – Opto-electronic control

• Control of each unit by an Opto transmitter

• Tramlining

• Monitor seed/ha, total worked area

• Electronic hectare meter

• Working widths between 3.00m - 12.00m

• The enhanced element based on the same row concept

• Each sowing heart is driven by an electric motor

• Infinite adjustment of sowing distances for optimised seed population (from 12.5 – 25

cm)

Monopill e-drive II

Tandem sowing unit

Monopill – Equipment

Mulch sowing unit with Monoflex press wheel

Standard sowing unit with Finger press wheel

Monopill – Press WheelsRow setting = Coulter – intermediate press wheel – coverer – conical press wheel

1. V-shaped coulter opens the furrow

2. The intermediate press wheel firms seed into

the furrow

3. The coverers put some more earth on the

furrow

4. The conical press wheel consolidate the earth

at the side more than in the middle

=> The amount of covering soil (B) is similar to

that of the sowing depth (A)

Ideal for wet and loamy soils

Row setting = Coulter – coverer – finger press wheel

1. V-shaped coulter opens the furrow

2. The coverers put some more earth on the

furrow

3. The finger press wheel consolidate the earth

in the middle more than at the sides

=> The covering soil (B) is lower than the sowing

depth (A).

A "Micro climate" then protects the germinated plant

Monopill – Press Wheels

Monopill S/ e-drive II – Electronics

Introduction: tramlines in Sugar Beet Reasons for setting up tramlines:

• Opportunity to save sugar beet seeds (cost of 100.000 sugar beet seeds: 150 €)

• Ease follow-up operations e.g. fertilising and spraying with less crop damage

• Opportunity to drive over the sugar beet field without special cultivation tyres

=> reduce handling costs

• Reduction of losses at the edge of rows => uniform root size

• Possibility to reduce soil compaction and damage of the earth structure => use of floatation tyres possible

• Reduce the danger of erosion in the tractor wheel tracks

Visus – The Opto - Electronic Control

• Monitoring of seeds/ha

• Control of up to 24 sowing units

• Electric hectare meter

• Summary of worked total area

• Opto transmitter with plug connection

• Automatic tramlining system up to 4

clutches (set of 2 or set of 4 clutches)

• Service function

1.Seed coulter

2.Seed disc

3.Optosensor

Mechanical Shut-off via ClutchesMonopill S with Visus

• Opto-electronic control and tramlining

• Only for customers with a fixed tramline widths

• Maximum of 4 shut-off clutches

• Set of 2 or set of 4 shut-off clutches

• Spraying width:

– 10.8m; 16.2m; 27.0m; 21.6m; 32.4 m

(12r/45cm/1.80m)

– 12.0m; 18.0m; 24.0m; 32.0m; 36.0m

(12 r/50cm/2.00m)

Visus

Monopill with e-drive II Monopill e-drive II with IsoMatch Tellus / IM Tellus GO

• All standard tramlines are programmed in Monopill

e-drive II control box (also chaotic systems)

• Seed spacing adjustment during work

• The amount of seed at edge rows can be reduced or

increased stepwise

• Opto-electronic sensors counting the seeds and

advising of unit problems (e.g. empty hopper)

• Row by row shut-off Ready for GEOcontroll®

• On board diagnostic system to help locate failures

• Ready for GEOseed®

Monopill e-drive II – IsoMatch Tellus

The next generation universal ISOBUS Terminal – IsoMatch Tellus

• Two ISOBUS interfaces in one terminal• Multifunctional ergonomic design• ISOBUS Shortcut Button

The IsoMatch Tellus is the first ISOBUS with the

capability to operate different machines on 2 screens

through 1 terminal, without the need to constantly

toggle between screens.

27

GEOcontroll® - the automatically row switch-off, steered by GPS

• Steered by GPS one row after another is switched off at the heads land

• Saving seeds• No place in field with doubles or triples • No missings no free spots for weeds in

the field• Easy handling for driver• Full concentration of driver on field

conditions and turning process

28

GEOseed® - the intelligent way of precise placing of seeds

Seeding in parallel and diamond pattern

• The patented two-dimension placement control allows seeding in parallel or diamond patterns

• By adding a precise GPS signal (RTK) in combination the sowing heart extension synchronisation beyond machine width is ensured by GPS co-ordinates.

• Positive effects of GEOseed® can be reached with close row sowing (37,5 – 45 cm) and seed distances wider than 18-20 cm

• Further information about the possibilities and necessary needs for GEOseed you find in GEOseed presenation!

29

GEOseed® - the intelligent way of precise placing of seeds

sugarbeet with Monopill and GEOseed

Monopill – Additional Equipment

Option – Microgranular applicator• Hoppers, made out of special plastics

• Capacity per hopper of 35 litres

• Hoppers mounted according to the working width

• With 2 or 3 outlets per unit

• Metering wheels of different sizes and materials

application requirements of most types of micro-granule

Monopill - Technical Data FrameMonopill frame 6 rows rigid 12 rows rigid 18 rows rigid 24 rows rigid 12 rows PH 18 rows PH

mechanic drive with 7 gear lever gearbox X X X - X X

e-drive II X X X X X X

Tyres 5.00-15 X X X - X X

Tyres 26x12 STG - - - X - -

Manually operated Track marker X - - - - -

Hyraulic operated track marker arms O X X X X X

Pre Emergence markers O O* O* on request O O

Mechanic Hectaremeter O O O - O O

Lighting Equipment O O O O O O

Drift prevention disc O O O O O O

Microgranualar applicator O O O - O -

Row width 45/50 45/50 45/50 45/50 45/50 45/50

Total weight (kg) for basic version 400 910 1750 2800 1250 2180

* Possibility of collisions between PEM and Lengthwise transport device

X Standard equipment

O Optional Equipment

- Not Available

Monopill - Technical Data Sowing Unit

Monopill sowing unit Normal seeding Tandem row Mulch seeding

Parallelogramm hitch X X X

Clod deflector O O -

Parallel clod deflector - - O

Rotating coverer O - X

Rigid coverer X X O

Monoflex press wheel X X X

Finger press wheel O O O

Single hopper content (l) 9 9 9

Weight of one sowing unit (kg) 50 59 64

XStandard equipment

O Optional Equipment

- Not Available

• Proven, stable frame concept

• Clear design and good accessibility for easy operation

• Zero Deposit – for precise and very accurate seed placement

• Special chain control (no backlash) for a calm and constant run of the unit

• Electronic drive for enhanced performance (e-drive II)

• Additional tools for a perfect seed bed

• Exact tramlining control system to ease the follow up operations

• Precision Farming for cost efficiency and yield optimization

• Monopill with e-drive II is ready for GEOseed®

Monopill: Main advantages

 

 

 

See our

Machines

at work

on YouTube

visit us at www.kvernelandgroup.com

The Future of Farming