Kverneland Access

Product information 2014

Kverneland AccessS-tine harrow for seedbed preparation

• Seedbed preparation

• Strong frame and headstock

• Tines

• Quick tines change

• Depth control

• Side deflectors

• Accord Hitch/PTO transfer shaft

• Track eradicators

• Track marker arm holders

• Large rollers range

• Road signs

• Technical data

• Main arguments

Access – Content

Access – Seedbed combination

Access – Strong frame and headstock

• Strong power harrow headstock able to carry heavy drills with high hopper capacity like I-Drill (not compatible with CX Ultra), s-drill & s-drill pro, DA, DF, Optima, m-drill and m-drill pro

• Compact frame for a good integration of heavy drills with lower lifting capacity required

• 3 point linkage Cat II and Cat III

Straight tine 45x10 mm:

• Strong 45x10 mm straight tine for all conditions (light to heavy)

• Can be staggered on 2 or 3 rows• Avoid to bring wet clods on top• The average tine spacing is 150 mm (more

details in technical data)

Access – 2 types of tines

Levelling tine 45x10 mm:

• Strong 45x10 mm levelling tine for light conditions and residues

• Can be staggered only on 2 rows• For fast seedbed preparation• The average tine spacing is 150 mm (more

details in technical data)

• Strong 45x10 mm straight tine for all conditions (light to heavy)

• 2 rows of tines : the distance between the 2 rows is 200 mm

• 3 rows of tines : the distance between the first and the second row is 336 mm for a good material flow

• The average tine spacing is 150 mm (more details in technical data)

• Working depth up to 15 cm

Access – 2 or 3 rows of tines

336 mm 200 mm

• 3 rows of tines : the 1rst row is bolted in front of the frame. It is easy to add this additional row when the machine is equipped with 2 rows

• The tine supports are bolted to avoid any weaknesses on the main frame

Access – 2 or 3 rows of tines

• Good access for changing tine tips : the tines are fitted on a tine support that can be easily removed in few minutes for safe maintenance operations

Kverneland exclusivity – Tine quick change

• The tine support is only bolted by 2 bolts on one side. A cone and an anti-rotation stop are blocking the tines support in the middle

• For changing tips, the laterals deflectors must be removed (2 pins)

Kverneland exclusivity – Tine quick change

• Remove the lateral tine

• Remove the 2 bolts of the tines support

• Take away the tines support

Kverneland exclusivity – Tine quick change

• Safe and good Access to all maintenance operations : Tips can be changed on the workbench. It is not necessary to go underneath the machine

(dangerous and uncomfortable) Easy Access to the worn nut of the tips with a grinder (on the workbench).

• The customer can have a another set of tines in order to save maintenance time during the seeding season

• Roller is controlling the depth control• Easy and friendly adjustment• 2 different possibilities depending of the seeding coulter bars

Access – Depth control

Standard roller arms for combination with

precision seeders, mechanical drill carried by

hydraulic lift or mounted drill without coulter

bar connection onto the roller frame

Parallelogram in combination with i-drill or s-drill pro for a fix coulter bar position whatever the depth is.

Access – Side deflectors

• Mounted on a parallelogram to follow

ground curves

• Long deflector plate for a good soil

guidance and in order to avoid ridges

• The parallelogram is made with high

quality steel to allow flexibility with stones

• The deflectors are hold by 2 pin and

can be removed in few second to get

access to the tines

Accord hitch

• Same “A” triangle as power harrows which

is adapted to Access frame in order to fit all

Accord drills (with long parallelogram)

Straight levelling bar

• Adaptable with 2 rows of tines• Mechanical depth adjustment by pins• Spring loaded safety system• Combinable with track eradicators• Angle adjustment available

Clod Board levelling bar

• Adaptable with 2 rows of tines• For active crumbling effect • Hydraulic depth adjustment • Combinable with track eradicators• Agressivity can be adjusted

PTO transfer shaft

• The intermediate transfer shaft is available as an option• This kit includes the tractor PTO shaft, the transfer shaft

and supports

• The Access receives the Hydrolift

from the power harrow• Lifting capacity is 1,6 tones• It can carry high capacity drills

Hydrolift

Access – Track eradicators

Rigid track eradicators with shear bolt protection

• Track-eradicators are fitted on the main frame

• With 3 rows of tines, they are fitted in the line of the tine located at that place on the first row

Access – Track markers arm holders

I-Drill track marker arms can be fitted on the Access frame with the track marker holders for:- Better track marker stability,- Less strain on the coulter bar- Lower required lifting capacity

For a safe transport, the Access can be equipped with road signs- Front ones (2 units)- Lateral one and rear ones (4 units)

Access – Large roller offer

• Cage roller 550 mm or reinforced cage roller ø550mm (not compatible with I-Drill) – 10 bars

• Packer roller 500 mm & 585 mm

• Flexline roller 585 mm

Access – Heavy Actipack roller

Actipack roller ø 560mm

•The knives are cutting bigger clods coming in the disc spacing of 12,5cm leaving a ready seedbed

• Knives pressure can beadjustable as high as thedisc pressure to the groundto make equal pressurethrough the working width,and can also be put in a nonworking position to leave arough ground surface.

• Heat treated discs for better resistance.• Skid and knives between discs cleaning even in wet and sticky conditions (option)• Shaft diameter: 50 mm

Access – Technical dataWorking width (m) 3.00 3,5 4.00Maximum HP 180 200 220

Tine spacing with 2 rows of straight tines 162 155 163Number of tines 18 22 24Tine spacing with 2 rows of straight tines 302 296 289Number of tines 18 22 26Tine spacing with 3 rows 162 155 150Number of tines 20 22 26Front box sectionRear box sectionpacker roller Ø 500 mm 961 1054 1159packer roller Ø 585 mm 1088 1197 1319cage roller Ø 550 mm 810 882 963Flexline roller Ø 585 mm 1191 1316 1453Actipack roller Ø 560 mm with knifes 1186 1321 1533

Roller attachment

Seed drill combination possible

Accord triangle, Hydrolift, track- eradicators, PTO transfer shaft, track marker holders, CrossboardI-drill (w/o CX Ultra), DF- 1, s-drill, DA, m-drill/ m-drill Pro, Optima, Optima HD

Straight or leveling tine 45 x 10 mmStandard arms or parallelogramm for Pro connection

Type of tines

Accessories

2 rows

3 rows

frame

Weight (kg) für Access 3

rows

100 x60 x 6 mm120 x 80 x 8 mm

• 2 or 3 rows (straight tines) of tines• Levelling or straight tines• 3.00 to 4,00 m rigid• Quick tines change support for easy and safe

maintenance• Strong, light and compact (easy to lift)• Combination with all

Accord drills (except i-drill with CX ultra coulters)

• Perfectly adapted for operation in light to medium soil.• Can match with all heavy rollers in KV range• Large roller offer• With little wear and high output performance, the Access is a real alternative

Access – Main arguments

Kverneland Access S-tine combination:

Solo or in combination – a real alternative !

 

 

 

See ourMachines at workon YouTube

www.kverneland.com

visit us at www.kvernelandgroup.com

The Future of Farming