Post on 13-Apr-2015
description
transcript
LAB-ID
Water Tap
SocketsElectrical
Gas Valve
Sink
- 'C' SystemCABIN ET
Table
ItemCustomize
Balance
Shower &Eyewash
Fume-cupboard
Emergency Wall Storage
Free StandingStanding Storage
- 'A' System- 'M' System- 'P' System
Worktop
COMPLETE SYSTEM
STORAGEFITTIN GS
INSTALL
Under Bench
LABORATORY FURNITURE SYSTEM
FABRICATE
DESIGN
LAB-ID
WORKTOP
Description Cast EpoxyDURCON
Phenolic Resin
StainlessSteel
MelamineLaminate
Poly-propylene
SolidSurface
ChemicalResistance
High Low Low Low High Low
Monolithic Yes No No No High NoNon Porous Yes Yes Yes Yes Yes YesFlameResistance
Yes No Yes No No No
MoistureResistance
Yes No Yes No Yes No
Use inFume-cupboards
Recommen-ded
NotRecommen-ded
Recommen-ded
NotRecommen-ded
NotRecommen-ded
NotRecommen-ded
Type ofsinksrecomm-ended to usewith
Epoxy, Poly-propylene &Stainlesssteel
Poly-propylene &Stainlesssteel
Stainlesssteel
Poly-propylene &Stainlesssteel
Poly-propylene &Stainlesssteel
Poly-propylene &Stainlesssteel
Application All areaswhere highmoisture,heat, harshchemicalenvironmentand ease ofdecontamination isnecessary
Wet andcommonchemicalresistantareas.
Suitable inwetenvironmentand ease ofcleaning.
Dry areas forinstrumentand writingarea.
Wet andcommonchemicalresistantareas.
Morecommercialthanindustrialuse.
CostEvaluation
Costeffective as itgives valueandperformance
Economic asperformancenotcompetitiveto Epoxy.
Expensivethan Phenolicresin top as itrequirespacking ply.Conductorfor electricity
Cheap due itslimitedperformance.Not populardue presenceof phenolictops
Expensive asit requires apacking plysheet.
Valued atcommercialrate.Expensivethan epoxytop.
FITTINGS
LAB-ID
- WATER TAP -
- SINK & DRIP CUP -
FITTINGS
LAB-ID
- ELECTRICAL SOCKET-
- GAS VALVE -
“C” SYSTEM
LAB-ID
The “C” System based on easy assembles and dissemble concept has 4 main element; Worktop,steel frame structure, underbench cabinet and utility fittings. The basic structure has a verticaland horizontal support structure. Vertical supports are laid at a span of maximum 1m apart. Thesystem creates a service void area at the rear part of the bench covered with removable backpanels.
Underbench cabinets are suspended within the bench structure, creating a maintenance space of200mm below the cabinet from the floor level. The suspended cabinet from the bench structure isusing a fixed mechanism under the bench top.
The worktop supported by vertical and horizontal steel frame structure makes the worktopindependent from the underbench cabinet. The leveling of the bench made easy with the heightadjustable leg from vertical steel frame
“A” SYSTEM
LAB-ID
The “A” System based on easy assembles and dissemble concept has 4 main element; Worktop,steel frame structure, underbench cabinet and utility fittings. The basic structure has a verticaland horizontal support structure. Vertical supports are laid at a span of maximum 1m apart. Thesystem creates a service void area at the rear part of the bench covered with removable backpanels.
Underbench cabinets are elevated within the bench structure, creating a maintenance space of200mm below the cabinet from the floor level. The shelved like positioned cabinet between thevertical steel frames comes with support mechanism
The worktop supported by vertical and horizontal steel frame structure makes the worktopindependent from the underbench cabinet. The leveling of the bench made easy with the heightadjustable leg from vertical steel frame
“M” SYSTEM
LAB-ID
The “M” System based on easy assembles and dissemble concept has 4 main element; Worktop,steel frame structure, underbench cabinet and utility fittings. The basic structure has a verticaland horizontal support structure. Vertical supports are laid at a span of maximum 1m apart. Thesystem creates a service void area at the rear part of the bench covered with removable backpanels.
Underbench cabinets are on wheel castors creates a maintenance mobility. Mobility mechanismare from heavy duty nylon wheel swivel castors with brakes. The worktop supported by vertical and horizontal steel frame structure makes the worktopindependent from the underbench cabinet. The leveling of the bench made easy with the heightadjustable leg from vertical steel frame
“P” SYSTEM
LAB-ID
The “P” System based on easy assembles and dissemble concept has 3 main element; Worktop,underbench cabinet and utility fittings
Underbench cabinets are floor based, supportive with PVC adjustable legs and removabletoekick panels. The worktop supported directly by underbench cabinet system
UNDER BENCH CABINET – “C” SYSTEM
LAB-ID
UNDER BENCH CABINET – “A” SYSTEM
LAB-ID
UNDER BENCH CABINET – “M” SYSTEM
LAB-ID
UNDER BENCH CABINET – “P” SYSTEM
LAB-ID
WALL STORAGE CABINET
LAB-ID
- WALL MOUNTED CABINET -
- WALL SHELVE -
FREE STANDING CABINET
LAB-ID
- TALL STORAGE CABINET -
- OPEN STEEL RACK –
BALANCE TABLE & EMERGENCY UTILITIES
LAB-ID
- BALANCE TABLE -
- EMERGENCY SHOWER & EYEWASH –
FREE STANDING CABINET
LAB-ID
-FUMECUPBOARD -
“LAB ID” SAMPLE DRAWINGS
LAB-ID
“C” SYSTEM
LAB-ID
easy assemble and disassemble easy access to services area with removable back panels under bench cabinets are suspended within the frame structure height adjustable for leveling bench with adjustable stud fully concealed services area cabinet comes in the option of metal or chipboard material
“A” SYSTEM
LAB-ID
easy assemble and disassemble easy access to services area with removable back panels easy maintenance floor area with elevated under bench cabinets height adjustable for leveling bench with adjustable stud fully concealed services area cabinet comes in the option of metal or chipboard material
“M” SYSTEM
LAB-ID
easy assemble and disassemble easy access to services area with removable back panels under bench cabinet independent from worktop height adjustable for leveling bench with adjustable stud extra flexibility with mobile under bench cabinets cabinet comes in the option of metal or chipboard materials
“P” SYSTEM
LAB-ID
easy assemble and disassemble easy access to services area with removable back panels minimize dust trap area with floor based pedestal front removable toe kick panel fully concealed services area cabinet comes in the option of metal or chipboard material worktop supported by under bench cabinet
LAB-ID
LABORATORY FURNITURE SYSTEM
DESIGN↓
FABRICATE↓
INSTALL
MAIN COMPONENTS: -
• Worktops → Cast epoxyDurcon
Phenolic resin Stainless steel Melamine(MFC)
Polypropylene Solidsurface
• Frame Structure → “C” System “A” System “M” System Without metal frame
• Storage Cabinets → Under benchsystems
Wall mountedcabinets
Tall cabinets Non standardcabinets
• Fittings → Water taps Gas valve Electrical sockets Sinks and drip cups
• Fume Cupboard → General purpose Perchloricwith scrubber
Walk in type Fume hood Articulated arm suction hood
• Safety Equipment → Emergency shower Eyewash
• Balance Table → Single stone Double stone
• Reagent Rack → 2 tier with service channel 3 tier
• Customize Items → Dilution tank Pegboard Lab stools
LAB ID SUPPLIES SDN BHD