Post on 02-Aug-2020
transcript
LED LIGHTING POWER CONVERTER
LED LIGHTING POWER
CONVERTER UNIVERSAL
LED LIGHTING POWER CONVERTER
Product Features
· Active power-factor compensation circuits is built-in · Excellent quality and durability · Prevent the risk of fire by avoiding use of explosive components · Unused cooling fan (reduce noise, extend product life cycle) · Capacity of maintaining low temperature due to best heat dissipating system · Replacement cost saving due to excellent durability (50,000hours) · Designed as IP67 to use for indoor and outdoor · Over 90% of high efficiency products · Qualified to Industrial LED lighting and LED street lighting
LED LIGHTING POWER CONVERTER
Appearance
Product Specifications
MODEL INPUT OUTPUT [48V / 36V / 30V] SHAPE
1
60w LPS-FUIN60WXXV-V1
100-277Vac~
1.12A / 1.50A / 1.80A
172*67*39mm 70w LPS-FUIN70WXXV-V1 1.31A / 1.75A / 2.10A
80w LPS-FUIN80WXXV-V1 1.50A / 2.00A / 2.40A
2
90w LPS-FUIN90WXXV-V1 1.69A / 2.25A / 2.70A
223*67*39mm
100w LPS-FUIN100WXXV-V1 1.87A / 2.50A / 3.00A
120w LPS-FUIN120WXXV-V1 2.25A / 3.00A / 3.60A
150w LPS-FUIN150WXXV-V1 2.81A / 3.75A / 4.50A
3 200w LPS-FUIN200WXXV-V1 3.75A / 5.00A / 6.00A 226*67*39mm
1 2 3
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (60W)
Model LPS-FUIN60W48V-V1 LPS-FUIN60W36V-V1 LPS-FUIN60W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 1.12A 1.50A 1.80A
Rated Power 54W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load,
>0.98/115VAC @100% Load
Efficiency(Typ.) 90% / 230VAC 88% / 115VAC
AC Current 0.27A/230VAC 0.53A/115VAC
Rated Power 60W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 2.0A 3.0A 3.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 Class B
Harmonic Current Compliance to EN6100-3.2 Class C,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Highlights (70W)
Model LPS-FUIN70W48V-V1 LPS-FUIN70W36V-V1 LPS-FUIN70W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 1.31A 1.75A 2.10A
Rated Power 63W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 90% /230VAC 88% /115VAC
AC Current 0.31A/230VAC 0.62A/115VAC
Rated Power 70W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 2.0A 3.0A 3.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
Electrical and Photometric Data
LED LIGHTING POWER CONVERTER
Highlights (80W)
Model LPS-FUIN80W48V-V1 LPS-FUIN80W36V-V1 LPS-FUIN80W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 1.50A 2.00A 2.40A
Rated Power 72W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 90% /230VAC 88% /115VAC
AC Current 0.36A/230VAC 0.71A/115VAC
Rated Power 80W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 2.0A 3.0A 3.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
Electrical and Photometric Data
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (90W)
Model LPS-FUIN90W48V-V1 LPS-FUIN90W36V-V1 LPS-FUIN90W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 1.69A 2.25A 2.70A
Rated Power 81W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 90% /230VAC 88% /115VAC
AC Current 0.40A/230VAC 0.80A/115VAC
Rated Power 90W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 2.5A 3.5A 4.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (100W)
Model LPS-FUIN100W48V-V1 LPS-FUIN100W36V-V1 LPS-FUIN100W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 1.87A 2.50A 3.00A
Rated Power 90W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 90% /230VAC 88% /115VAC
AC Current 0.45A/230VAC 0.89A/115VAC
Rated Power 100W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 2.5A 3.5A 4.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (120W)
Model LPS-FUIN120W48V-V1 LPS-FUIN120W36V-V1 LPS-FUIN120W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 2.25A 3.00A 3.60A
Rated Power 108W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 91% /230VAC 88% /115VAC
AC Current 0.54A/230VAC 1.06A/115VAC
Rated Power 120W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 3.0A 4.0A 5.0A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (150W)
Model LPS-FUIN150W48V-V1 LPS-FUIN150W36V-V1 LPS-FUIN150W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 2.81A 3.75A 4.5A
Rated Power 135W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 91% /230VAC 88% /115VAC
AC Current 0.67A/230VAC 1.33A/115VAC
Rated Power 150W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 3.5A 4.5A 5.5A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Electrical and Photometric Data
Highlights (200W)
Model LPS-FUIN200W48V-V1 LPS-FUIN200W36V-V1 LPS-FUIN200W30V-V1
POWER
Output Voltage 48V 36V 30V
Rated Current 3.75A 5A 6A
Rated Power 180W
Line Regulation ±2%
Load Regulation ±1%
INPUT
Voltage Range 100 ~ 277VAC
Frequency Range 47 ~ 63Hz
Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load
Efficiency(Typ.) 91% /230VAC 88% /115VAC
AC Current 0.90/230VAC 1.78A/115VAC
Rated Power 200W ±5%
Inrush Current 25A/230VAC
Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC
PROTECTION
Over Current 4.5A 6A 7A
Short Circuit Hiccup mode, recovers automatically after fault condition is remove
Over Voltage 54~60V 41~46V 41~46V
ENVIROMENT
Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)
Operating Humidity 20 ~ 90% RH
Storage Temperature ,
Humidity -40 ~ 80℃, 10 ~ 95% RH
SAFETY &
EMC
Safety Standards EN61347-1, EN61347-2-13, IP67 approved
EMI Compliance to EN55015, EN55022 ClassB
Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3
EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547
ETC
LED LIGHTING POWER CONVERTER
Pre-Installation Checklist products
Identification of Input Power
- Verify ballasts and input power
- Verify if input power is supplied constantly
Check for leakage of electricity and grounded
- Check for short circuit in case of rainfall and snowfall
- Check grounding of lighting fixture and ballast
Ambient Temperature
- Recommended Service Temperature: ordinary temperature
- Ordinary temperature : -20 ℃ ~ 60 ℃
Condition of Lighting Fixture
- Do not use sealed lighting equipment
- Confirm product contents and use specified products only
- Do not use if short circuit occurs caused by crack near socket connection (welding & coupling) or lampshade
※ Products that are damaged as a result of external causes, conditions demonstrating misuse, improper
installation, not following instructions, improper or inadequate maintenance, accident, or tampering are
excluded under the warranty.
LED LIGHTING POWER CONVERTER
Precautions
Please follow above installation instruction and install accurately -Products that are damaged due to improper installation is excluded under the warranty. Do not use in power supply other than a frequency tolerance and the rated power – It may result in fire and equipment damage. Do not operate at lighting fixture or circuit which has dimming function – It may result in fire and equipment damage. Avoid unstable locations when installing the equipment – It may result in failure from falling Do not operate the equipment outside -20 ~ 50℃ range of ambient temperatures – It may result in fire and failure If the equipment is installed when the ambient temperature is high, pay attention to ventilation of the equipment – It may result in fire and shortening product life cycle Do not repair, remodel, disassemble arbitrarily without following instructions – It may result in safety accident and failure Do not drop, giving a shock, applying force, and scratch. – It may result in failure Do not touch a lamp while it is on, and after lights-out within the next few minutes – It may result in burns and injuries Do not use surrounding a wet or humid environment – It may cause injuries by defective insulation, fall, etc. It may cause noise when lights-on near audio and video devices, such as Radio, TV – When noise occurs, move electric device over 1m (3ft) from the lighting equipment Do not spray chemical on the lamp – It may result in discoloration and deterioration Do not seal the lighting equipment or covered by a painting – It may cause of overheating, and it can lead to fire and injuries Do not use it near combustible/inflammable material, such as gasoline, acid, etc. – It may cause corrosion, shortening product life cycle, and it may leads to fire and explosion Making frequent flickering may result in shortening product life cycle
LED LIGHTING POWER CONVERTER
Certification
Conduction Noise : CE CLASS (B) -3dB
Radiation Noise : CE CLASS (B) -3dB
Vibration Resistant : Power supply normally operated without breakage after Vibration test
1) FREQUENCE :5 => 60 => 5 Hz
2) ACCELERATION : 0.5 G
3) Direction : X, Y, Z
4) Operating Time : 3 minutes
POWER ON/OFF TEST :
Power supply requires On/Off switching test over a 1,000 times on minimum input, normal load, and maximum
output
SURGE TEST
Do not have any breakage, ignition and fuming when it is applied 5 times of ±3KV to between L1-L2
Do not have any breakage, ignition and fuming when it is applied 5 times of ±6KV to between L1(L2)-F.G
ESD TEST
There should be no problem when following electrostatic noise is applied by condenser emission method
Condition : ⓐ Applied Voltage : Air ±15KV, Contact ±8KV
ⓑ Applied number : 10
ⓒ Capacitance: 150pF
ⓓ Discharge Resistance: 330Ω
ⓔ Interval : 1 sec 1 second
Leakage Current
When measuring between Live and 2nd GND, between Neutral and 2nd GND with input impedance meter of
1KΩ with rated Input and no load condition, it requires below 0.5mA
Insulation Resistance
The product requires above 100MΩ of insulation resistance of input and output sides when it applied DC500V.
At this time, measure input and output terminal, each tied separately
High Pot or Withstand Voltage
The product should be no problem when it is applied 3KV AC power (Cutoff Current 10mA) to input and
output sides for 1 minute [3.7KV/1sec.]
LED LIGHTING POWER CONVERTER
Certification