Post on 02-Apr-2018
transcript
Medium FrequencyInduction Furnaces
TECHNICAL CHARACTERISTICS
Flexible melting operation
Rapid start up
Rugged construction
Magnetically screened
Digital control
ECONOMIC CHARACTERISTICS
High power consumption efficiency
Low capital investment
High power densities
Reduced operational costs
Medium frequency furnace equipment for iron,
steel and non ferrous metals.
Induction melting offers the modern foundry a
clean, efficient, cost-effective melting facility with
all the advantages of state-of-the-art technology
and environmental protection.
The equipment is of proven
technical design, with high
performance, versatile to install
and user friendly to operate.
Melting Solutions Limited furnace installations are
designed to meet applicable statutory regulations
and safety requirements including electromagnetic
compatibility (EMC) and noise requirements
Medium Frequency Furnace Equipment
TECHNICAL CHARACTERISTICS
Flexible melting operation
Rapid start up
Rugged construction
Magnetically screened
Digital control
ECONOMIC CHARACTERISTICS
High power consumption efficiency
Low capital investment
High power densities
Reduced operational costs
Medium frequency furnace equipment for iron,
steel and non ferrous metals.
Induction melting offers the modern foundry a
clean, efficient, cost-effective melting facility with
all the advantages of state-of-the-art technology
and environmental protection.
The equipment is of proven
technical design, with high
performance, versatile to install
and user friendly to operate.
Melting Solutions Limited furnace installations are
designed to meet applicable statutory regulations
and safety requirements including electromagnetic
compatibility (EMC) and noise requirements
Medium Frequency Furnace Equipment
Melting Solutions Limited’s range of frequency converters include the latest IGBT
technology as well as conventional thyristor and are purpose built for use with
induction melting furnaces, which ensures full operating stability even under
extreme load conditions.
CHARACTERISTICS INCLUDE:
High electrical efficiency
Converter only loaded throughactive current
Fully controlled inverter andrectifier circuits
Water-cooled high powerdevices
Digital control with automaticmaximum power control
Solid smoothing reactor in DCintermediary circuit
Constant Power input throughoutthe whole melt cycle
1 kHz MFT Ge/St Furnace
Capacity kg Power kW Melt Rate Iron Melt Rate Steel
50 50 80 kg/h 65 kg/h
75 75 125 kg/h 110 kg/h
100 100 175 kg/h 150 kg/h
150 150 265 kg/h 230 kg/h
250 250 465 kg/h 400 kg/h
350 350 660 kg/h 575 kg/h
500 500 955 kg/h 830 kg/h
750 750 1430 kg/h 1260 kg/h
1000 1000 1930 kg/h 1710 kg/h
1500 1500 2940 kg/h 2630 kg/h
1 kHz MFT Cu/Ms Furnace
Capacity kg Power kW Melt Rate Cu Melt Rate Brass
60 50 80 kg/h 115 kg/h
90 50 75 kg/h 110 kg/h
120 75 120 kg/h 175 kg/h
180 100 185 kg/h 270 kg/h
300 200 440 kg/h 630 kg/h
400 250 540 kg/h 775 kg/h
600 400 900 kg/h 1290 kg/h
900 500 1110 kg/h 1590 kg/h
1200 750 1690 kg/h 2420 kg/h
1800 1000 2285 kg/h 3270 kg/h
3 dimensional layout drawing of CompactDual Furnace Melting Installation.
Let us help you optimise your plant layoutand potentialy increase your profit with a 3 dimensional proposal drawing.
1. Furnace
2. Converter & Capacitor Cubicle
3. Operator Control Desk
4. Hydaulic Pump Unit
5. Water Cooler Pump Set
6. Cooling Water Distribution & Monitoring Panel
Medium Frequency CorelessFurnace Plant
1
1
3
2 6
5
Melting Solutions LimitedUnit E, Dunton ParkKingsbury RoadCurdworthSutton Coldfield B76 9EBUnited Kingdom
Phone: +44 (0)1675 470 551 Fax: +44 (0)1675 470 645
E-Mail: sales@meltingsolutions.co.ukWeb: www.meltingsolutions.co.uk