Miko Marine Company Presentation

transcript

Company Presentation2014

Miko Marine ASinfo@miko.nowww.miko.no

Diving & Subsea Operations | In-Water Survey

Oil Spill Prevention | Marine Salvage

Tools & Services forDiving & Subsea Operations

In-Water SurveyOil Spill Prevention

Marine Salvage

Miko Plaster®

Keeping water on the outside and oil on the inside

Miko Plaster®

Outer layerPolyester-reinforced PVC matting

Inner layer Magnetic nitrile rubber

Lifting lugs

Miko Plaster®

Installed by divers or ROV

Miko Plaster®

Resistant to sea water, oil and most chemicals

Large variety of sizes and shapes

Qualified by DNV GL

Miko Plaster® Flexi-Shape

For groundings and collisions

Flexible patch for uneven surfaces and protrusions

Aramid-reinforced inner layer

Stapled in place with underwater fastenerCan penetrate hull plating up to 1 inch

Miko Plaster® Flexi-Shape

Anchor Magnets

Underwater tool for hanging off equipmentCan be customized for unique requirementsSafe & simple release mechanism

Anchor Magnets

• MAM-Light– 90 kg / 200 lb

• MAM-001– 150 kg / 330 lb

• MAM-003– 450 kg / 990 lb

• MAM-005– 1000 kg / 2 200 lb

Anchor Magnets

New Anchor Magnet

MAM-00X

Holding force2000 kg / 4 400 lb

Miko Plaster® Kits

• Emergency Response Bag– Oil Spill Prevention

• Tanker Kit– In-Water Survey

• Salvage Kit– Marine Salvage,

Wreck Removal

Patentpending

New Hot Tap Tool - Mosquito

Integrated drill- and pump functionMagnetic tripodOperated by diver or ROV

New Hot Tap Tool - Mosquito

Light weight, compact designLow costFlexibleEfficient handling

New ROV Magnet

Switchable magnetROV interfaceNo electric or hydraulic componentsHolding force 600-800 kg (1300-1800 lb)

Grab Handle – Magnet switched offRelease Handle – Magnet switched on

A unique system for recovering an abandonded vesselHelicopter-deployed connectorSea anchor and tow line integrated

Reduces drift rateReduces roll motionProvides pickup point for tug on unmanned vessel

MS Hundvåkøy, March 2010

00:00 00:00 00:0006:00 06:00 06:0012:00 12:00 12:0018:00 18:00

07:50 – Collision rips a 5.5 x 1 meter hole in engine room below the water line

07:55 – Vessel grounded to avoid total loss

12:00 – Coast guard arrives with Miko Salvage Kit

15:30 – Miko personnel arrives on site

21:15 – Vessel patched and ready to refloat

Vessel refloated

Vessel towed to quay and

secured

Miko Marine Company Presentation

Engineering