Post on 27-Nov-2014
transcript
engineering
Organisational AwarenessOrganisational Awareness
Aviation LegislationAviation Legislation
Chapter 1Chapter 1
engineering
OBJECTIVES
At the end of this chapter, you will be able to:
1. Explain the role of the International Civil Aviation Organisation (ICAO)
2. Explain the role of the Joint Aviation Authority (JAA)
3. Explain the role of JAA full member Authorities
4. Explain the role of JAA candidate member Authorities
5. Explain what information and the structure of Joint Aviation Requirements (JAR)
6. Explain the relationship between JAR-OPS, JAR 145, JAR 147, JAR 66 and JARMaintenance
engineering
In addition, you will be able to:
1. Identify those parts of the Air Navigation Order (ANO) that are of mostsignificance to a Licensed Aircraft Maintenance Engineer (LAME)
2. Explain what information is contained within British Civil AviationRequirements (BCAR)
3. State which public authority certifies the airworthiness of aircraft
4. State the purpose of Airworthiness Notices (AWN)
5. Explain what information is contained within Civil Aircraft AirworthinessInformation and Procedures (CAAIP)
engineering
Legislation is the term generally used to define the process through which the laws relating to all areas of the civil aviation industry, in the United Kingdom, are enacted.
engineering
Aviation LegislationEngineeringModule 10
Chicago Convention of 1944
Air Navigation Order (ANO)Arranged in
Parts, Articles and Schedules
Civil Aviation Act 1949
United Kingdom Legislation
Air Navigation Regulations (ANR)Sponsored by the
Secretary of State for Transport
International Civil Aviation Organisation (ICAO) Convention of 1944
Similar organisation of ICAO
recommendations by other contracting
states
engineering• Act of Parliament is the authority for the implementation of the Air Navigation Order (ANO)
- a statutory instrument that sets out, in detail the law of the land concerning civil aviation
The Role of the International Civil The Role of the International Civil Aviation Organisation (ICAO)Aviation Organisation (ICAO)
• On 7th December 1944 55 countries from around the world, including the United Kingdom, signed an international agreement on the regulation of civil aviation. This is sometimes referred to as ‘The Chicago Convention’‘The Chicago Convention’
• Effect to the ‘Chicago Convention’ was made in the Civil Aviation Act of 1949
• The ICAO has NO EXECUTIVE POWERS to incorporate or introduce legislation into a National Authority’s national standard
engineering
The Air Navigation Order (ANO)The Air Navigation Order (ANO)
• Civil Aviation Act of 1949
• The current ANO is dated July 19th 2000. The amendment state is included in the title reference given in the opening pages of the ANO.
• The ANO applies to all aircraft registered in the United Kingdom
engineering
The ANO is arranged as:
• Parts
• Articles
• Schedules
engineering
SECTION 1 THE AIR NAVIGATION ORDER 2000
Made 14th June 2000Laid before Parliament 26th June 2000Coming into force 9th July 2000
ARRANGEMENT OF ORDER
CITATION, COMME\CEMENT AND REVOCATION
Article1 Citation and commencement2 Revocation
PART 1 REGISTRATION AND MARKING OF AIRCRAFT
3 Aircraft to be registered4 Registration of aircraft in the United Kingdom5. Nationality and registration marks
PART I I AIR OPERATORS'CERTIFICATES
6 issue of air operators' certificates7 Issue of police air operators' certificates
The ANO
engineering
ANO (Cont…..)
PART Ill AIRWORTHINESS AND EQUIPMENT OF AIRCRAFT8 Certificate of airworthiness to be in force9 Issue. renewal, etc., of certificates of airworthiness10 Certificate of maintenance review11 Technical log12 Inspection, overhaul, repair, replacement and modification 13 licensing of maintenance engineers14 Equipment of aircraft15 Radio equipment of aircraft16 Minimum equipment requirements17 Aircraft, engine and propeller log books18 Aircraft weight schedule19 Access and inspection for airworthiness purposes
PART IV AIRCRAFT CREW.A.ND LICENSING20 Composition of crew of aircraft21 Members of flight crew - requirement for licence22 Grant, renewal and effect of flight crew licences27 Validation of licences28 Personal flying log book 29 Instruction in flying30 Glider pilot - minimum age
engineering
PART V OPERATION OF AIRCRAFT
31 Operations Manual32 Police operations manual33 Training Manual34 Public transport - operator's responsibilities35 Loading - public transport aircraft and suspended loads36 Public transport - operating conditions38 Aircraft registered in the United Kingdom - aerodrome operating minima39 Public transport aircraft not registered in the United Kingdom - aerodrome operating minima40 Non-public transport aircraft - aerodrome operating minima41 Pilots to remain at controls42 Wearing of survival suits by crew43 Pre-flight action by commander of aircraft44 Passenger briefing by commander45 Public transport of passengers - additional duties of commander
ANO (Cont…..)
engineering
ANO (Cont…..)45 Public transport of passengers - additional duties of commander 46 Operation of radio in aircraft47 Minimum Navigation Performance50 Area navigation equipment - aircraft registered in the United Kingdom. 51 Area navigation equipment ~ aircraft not registered in the United Kingdom 53 Use of flight recording systems and preservation of records 54 Towing of gliders55 Towing, picking up and raising of persons or articles r56 Dropping of articles and animals57 Dropping of persons58 Issue of Aerial Application Certificates59 Carriage of weapons and of munitions of war60 Carriage of dangerous goods61 Method of carriage of persons62 Exits and break-in markings63 Endangering safety of an aircraft64 Endangering safety of any person or property65 Drunkenness in aircraft66 Smoking in aircraft67 Authority of commander of aircraft
engineering
PART VII DOCUMENTS AND RECORDS
76 Documents to be carried77 Records to be kept78 Production of documents and records79 Power to inspect and copy documents and records80 Preservation of documents. etc.81 Revocation, suspension and variation of certificates, licences and other documents82 Revocation, suspension and variation of permissions, etc. granted under article 102 or article 10483 Offences in relation to documents and records
PART XI GEXERAL
113 Restriction with respect to carriage for valuable consideration in aircraft registered outside the United Kingdom114 Filing and approval of tariffs115 Restriction with respect to aerial photography, aerial survey and aerial work in aircraft registered outside the United Kingdom116 Flights over any foreign country117 Mandatory reporting118 Power to prevent aircraft flying119 Right of access to aerodromes and other places120 Obstruction of persons121 Enforcement of directions
ANO (Cont…..)
engineering
ANO (Cont…..)122 Penalties123 Extra-territorial effect of the Order124 Aircraft in transit over certain United Kingdom territorial waters125 Application of Order to British-controlled aircraft not registered in the United Kingdom126 Application of Order to the Crown and visiting forces, etc.127 Exemption from Order128 Appeal to County Court or Sheriff Court129 Interpretation130 Public transport and aerial work131 Saving132 Small aircraft133 Approval of persons to furnish reports134 Competent authority
SCHEDULES
Schedule 1 Part A Table of General Classification of AircraftSchedule2 A and B ConditionsSchedule3 Categories of aircraftSchedule4 Aircraft EquipmentSchedule6 Aircraft, Engine and Propeller Log BooksSchedule11 Documents to be carried by Aircraft Registered in the United KingdomSchedule12 Penalties
engineeringSec of State for Transport Air Navigation Regulation
Air Navigation Order Order in Council
Civil Aviation Act Act of Parliament
Parliamentary Readings
Parliamentary Bill
Parliamentary Approval & Royal Assent
3rd Reading
Parliamentary White Paper
Parliamentary CommitteeStage
2nd Reading1st Reading
engineering
OTHERGOVERNMENTS
BRITISHGOVERNMENT
USAGOVERNMENT
LAWS PASSEDRATIFYING
ICAO
CIVIL AVIATION ACTPASSED 1949
RATIFIED ICAO
LAWS PASSED RATIFYING
ICAO
JOINTAIRWORTHINESSREQUIREMENTS
AIRNAVIGATION
ORDER
CIVIL AVIATION AUTHORITY
BRITISH CIVILAIRWORTHINESSREQUIREMENTS
OTHERS UK USA
CHICAGO DECEMBER 1944INTERNATIONAL CIVIL AVIATION ORGANISATION (ICAO)
***********
***********
***********
F.A.A.
FEDERALAIRWORTHINESSREQUIREMENTS
engineering
The Civil Aviation Authority (CAA)The Civil Aviation Authority (CAA)
• Set up under the Civil Aviation Act of 1971
• Assumed responsibility and full authority for civil aviation matters on 1st April 1972
engineering
The Civil Aviation Authority (CAA)The Civil Aviation Authority (CAA)
• The affairs of the CAA are presided over by an executive committee consisting of a:
• Chairman and Deputy Chairman • Controller of National Air Traffic Services • Controller of SafetyController of Safety• Head of Air Transport Licensing• Controller of Finance and Planning
engineering
‘ ‘ In the field of aviation engineering and In the field of aviation engineering and maintenance, the prime concern of every maintenance, the prime concern of every engineer must always be the upholding of engineer must always be the upholding of
airworthiness and safety standards’airworthiness and safety standards’
Under the direction of the Controller of Safety’s direction, there are two main divisions each, in turn, under the control of a Director-General. These divisions are known as the ‘Safety Regulation Group’ (SRG)‘Safety Regulation Group’ (SRG) and ‘Operations’‘Operations’
engineering
The SRG is based at Aviation House, Gatwick, Surrey.
• delegated functions of SRG are primarily of a technical nature
• functions are implemented by staff known as ‘Surveyors’
• Aircraft engineers, whether working in design, manufacturing or maintenance, are all accountable to the CAA via the SRG
engineering
SRG currently comprises of the following divisions SRG currently comprises of the following divisions and departments:and departments:
Design and Manufacturing Standards Division which includes departments such as Structures & Materials and Powerplant Departments
Licensing Standards Division, includes the Engineer License Department, as well as Crew and Aerodrome licensing.
Medical Division, responsible for medical examination and certification
Support Services Division which includes the Airworthiness Requirements Section and the Safety Data and Analysis Unit
Operating Standards Division which includes, amongst many others, the Maintenance Standards Department,
engineering
The CAA publishes reference materials based on The CAA publishes reference materials based on the requirements of legislation, standards and the requirements of legislation, standards and procedures Some examples are as follows:procedures Some examples are as follows:
Navigation – The Order and The Regulation - CAP393
Airworthiness Notices - CAP 455
CAA Approved Organisations - CAP 475
Civil Aircraft Airworthiness Information and Procedures- CAP 562
Mandatory Aircraft Modifications and Inspections Summary- CAP 476
Mandatory Aircraft Reporting Scheme: Information &Guidance - CAP 382
engineering
Reference: CAA Document No 13 - Publication List
Log Books: > 2730kg Aircraft - CAP 408Engines - CAP 391VP Propellers - CAP 388
< 2730kg Aircraft - CAP 398Engines - CAP 399VP Propellers - CAP 400
British Civil Airworthiness Requirements
Section A - Airworthiness Procedures where CAA has PrimeResponsibility for Type Approval of the Product - CAP 553
Section B - Airworthiness Procedures where CAA does not have PrimeResponsibility for Type Approval of the Product - CAP 554
engineering
• The CAA maintains a close liaison with many other National Aviation Authorities (NAA). The aim of these liaisons is to share information related to aviation matters, thus ensuring airworthiness issues from across the world are reviewed and assessed for potential impact or applicability to the UK aviation industry and vice versa.
• The CAA, is a full member of the Joint Aviation Authority (JAA),
engineering
Examples of Other NAA’s Both Within Examples of Other NAA’s Both Within and Outside of the JAA Organisation.and Outside of the JAA Organisation.
• Europe Joint Aviation AuthorityJoint Aviation Authority (JAA)
• USA Federal Aviation AdministrationFederal Aviation Administration (FAA)
• France Bureau Veritas (BV) Direction Generale de L’Aviation Civile (DGAC)
• Germany Luftfahrt Bundesamt (LBA)
• Netherlands Civil Aviation Authority Netherlands (CAA)
• Italy Regio Aeronautico Italiano (RAI)
• Austria Ministry of Transport – Dept. of Civil Aviation (MT)
• Norway Civil Aviation Administration (CAA)
• Sweden Board of Civil Aviation (BCA)
• Canada Ministry of Transport (MT)
• Australia Department of Transport (DT)
• Finland National Board of Aviation (NBA)
• Belgium Administration de L’Aeronautique (ADLA)
engineering
British Civil Airworthiness British Civil Airworthiness Requirements (BCAR)Requirements (BCAR)
• BCAR’s are published by the SRG
• Relay the minimum airworthiness standards necessary to meet the ANO
and ANR
engineering
• BCAR are constructed in sequential alphabetical Sections. In these sections the material is supported by Appendices that are, in essence, acceptable interpretations or supplementary information related to the BCAR.
• This is similar to the Acceptable Means of Compliance (AMC), used in the JAR system, which will be covered in a later chapter. These sections are also published as Civil Aircraft Publications (CAP).
engineering
• A* AIRWORTHINESS PROCEDURES WHERE THE CAA HAS
PRIMARY RESPONSIBILITY FOR TYPE APPROVAL OF THE PRODUCT. CAP 553
• B* AIRWORTHINESS PROCEDURES WHERE THE CAA DOES NOT HAVE PRIMARY RESPONSIBILITY FOR TYPE APPROVAL OF THE PRODUCT. CAP 554
• G ROTORCRAFT CAP 465
• J ELECTRICAL CAP 466
• K LIGHT AEROPLANES CAP 467
• M EMISSION CERTIFICATION CAP 514
• N NOISE CAP 469
• Q NON-RIGID AIRSHIPSCAP 471
• R RADIO CAP 472
• S SMALL LIGHT AEROPLANES CAP482
engineering
Civil Aircraft Airworthiness Civil Aircraft Airworthiness Information and Procedures Information and Procedures
(CAAIP)(CAAIP)
• CAAIP are published by the CAA• 14 sequentially numbered Parts and individual
Leaflets • Contains information on a variety of matters
concerned with the manufacture, overhaul, repair, maintenance, operation and procedures of civil aircraft.
• Information not specific to any particular type of aircraft, engine, equipment or component part fitted to civil aircraft
engineering
WarningWarning
It is essential that where specific It is essential that where specific information or guidance is information or guidance is required, the appropriate required, the appropriate manufacturer's manual is referred manufacturer's manual is referred to at all times!to at all times!
CAAIP’s must NOT be used as reference material
engineering
Leaflet Number Title Issue/Revision Date
Part 1 Airworthiness Procedures
1-2 Legislation and Requirements Rev 30 June 1997
1-3 Occurrence Reporting and the Engineer Iss 1July 1990
1-4 Weight & Balance of Aircraft Iss 1 July 1990
1-5 Aircraft Engine and Propeller Log Books Iss 1 July 1990
1-6 Maintenance of Aircraft not Exceeding 2730 kg, including Star Inspection Rev 17 June 1991
1-7 Condition Monitored Maintenance Iss 1 July 1990
1-8 Storage Conditions of Aeronautical Supplies Iss 1 July 1990
1-9 Concessions during manufacture Iss 18 Dec 1990
engineering
Part 2 Engineering Practices and Procedures
2-1 Engineering Drawings Iss 1 July 19902-2 Clean Rooms Iss 1 July 19902-3 Timber Conversion – Spruce Iss 1 July 19902-4 Synthetic Resin Adhesives Iss 1 July 19902-5 Locking and Retaining Devices Iss 1 July 19902-6 Cleanliness of Aircraft Iss 1 July 19902-7 Paint Finishing of Metal Aircraft Iss 1 July 19902-8 Fabric Covering Iss 1 July 1992-9 Doping Iss 1 July 19902-10 Thread Inserts Iss 1 July 19902-11 Torque Loading Iss 1 July 19902-12 Cable – Splicing and Swaging Iss 1 July 19902-13 Control Systems Iss 1 July 1990 2-14 Measurement and Calibration Systems Rev 30 June 1997
engineering
Part 4 Non Destructive Examinations
4-1 Oil and Chalk Process Iss 1 July 1990
4-2 Penetrant Dye Processes Iss 1 July 1990
4-3 Fluorescent Penetrant Processes Iss 1 July 1990
4-4 Performance Testing of Penetrant Testing Matls. Rev 11 June 1993
4-5 Ultrasonic Flaw Detection/Thickness Measurement Iss 1 July 1990
4-6 Radiological Examination of Aircraft Structures Iss 1 July 1990
4-7 Magnetic Flaw Detection Iss 1 July 1990
4-8 Eddy Current Method Iss 1 July 1990
4-9 Endoscope Inspections Iss 1 July 1990
engineering
Airworthiness Notices (AWN) - Airworthiness Notices (AWN) - CAP 455CAP 455
AWN’s are the means by which the CAA, via the SRG, publishes information at short notice on technical, mandatory and administrative matters concerning airworthiness.
engineering
ContentsIssue 127
23 October 2000AIRWORTHINESS NOTICE
CIVIL AVIATION AUTHORITY
engineering
Notice No. Subject
* 1 Issue 13 30 Sept 1996 FOREWORD
†† 33 IIssssuuee 1166 2233 OOcctt 22000000 LLIICCEENNSSEEDD AAIIRRCCRRAAFFTT MMAAIINNTTEENNAANNCCEE PPEERRSSOONNNNEELL––CCEERRTTIIFFIICCAATTIIOONN RREESSPPOONNSSIIBBIILLIITTIIEESS OOFF TTYYPPEE RRAATTEEDD//AAUUTTHHOORRIISSEEDD PPEERRSSOONNNNEELL IINN RREELLAATTIIOONN TTOO AARRTTIICCLLEESS1100 && 1122 OOFF TTHHEE AAIIRR NNAAVVIIGGAATTIIOONN OORRDDEERR AANNDD JJOOIINNTTAAVVIIAATTIIOONN RREEQQUUIIRREEMMEENNTT JJAARR 114455..5500..
* 4 Issue 15 20 March 2000 PROPELLERS APPROVED FOR USE ON CIVILAIRCRAFT CONSTRUCTED IN THE UNITED KINGDOM.
20 March 2000 * APPENDIX
§ 5 Issue 1 1 April 1972 TYRE WEAR LIMITATIONS.
* 6 Issue 46 23 Oct 2000 AIRWORTHINESS PUBLICATIONS - GENERALINFORMATION.
23 Oct 2000 *APPENDIX NO 1.23 Oct 2000 *APPENDIX NO 2.23 Oct 2000 *APPENDIX NO 3.
§ 7 Issue 2 18 March 1999 THE POTENTIAL RESETTING OF GLOBAL POSITIONINGSYSTEM (GPS) RECEIVER INTERNAL CLOCKS.
engineering
† 10 Issue 2023 Oct 2000 AIRCRAFT MAINTENANCE AIRCRAFT MAINTENANCE ENGINEERS ENGINEERS LICENCES - TYPE LICENCES - TYPE RATINGS.RATINGS.
§ 12 Issue 5020 March 2000 EXPERIENCE FROM INCIDENTS. EXPERIENCE FROM INCIDENTS. § APPENDICES NOS 7, 16, 17, 39§ APPENDICES NOS 7, 16, 17, 39§ APPENDICES NOS 52-60§ APPENDICES NOS 52-60
† 14 Issue 1123 Oct 2000 APPROVAL OF ORGANISATIONS APPROVAL OF ORGANISATIONS FOR MAINTENANCE OF AIRCRAFT FOR MAINTENANCE OF AIRCRAFT AND COMPONENTS, AND CAA AND COMPONENTS, AND CAA JAR-145 IMPLEMENTATION.JAR-145 IMPLEMENTATION.
† 46 Issue 1423 Oct 2000 AIRCRAFT MAINTENANCE AIRCRAFT MAINTENANCE ENGINEERS ENGINEERS LICENSING - LICENSING - GENERAL LICENSING GENERAL LICENSING INFORMATION.INFORMATION.
engineering
AWN are issued to:AWN are issued to:
• All owners of civil aircraft on the UK register
• All holders of an Aircraft Maintenance Engineers License issued by the CAA
• All Organisations approved by the CAA under the ANO
engineering
NOTE:NOTE:
It is the responsibility of the It is the responsibility of the individuals or individuals or organisationsorganisations holding copies of AWN’s to holding copies of AWN’s to insert and or amend the Notices promptly. insert and or amend the Notices promptly. Ignorance of the contents of an AWN is Ignorance of the contents of an AWN is no defence in lawno defence in law..
engineering
Frequently Referenced AWN’s
AWN No 3AWN No 3 - Type Rated Licensed Aircraft Engineers and Members of Approved Organisations – Certified Responsibilities (in relation to ANO Art 9 & 11)
AWN No 6AWN No 6 - General Information on CAA Publications
AWN No 10AWN No 10 - Aircraft Engineers Licenses – Categories and Ratings
engineering
AWN No 47AWN No 47 - Licensed Aircraft Maintenance EngineersLicensed Aircraft Maintenance Engineers Personal Responsibilities when Personal Responsibilities when Medically Medically
Unfit or Under Influence of Drink or Unfit or Under Influence of Drink or DrugsDrugs
AWN No 71AWN No 71 - Maintenance Error Management SystemsMaintenance Error Management Systems
AWN No 72AWN No 72 - Safety Critical Maintenance TasksSafety Critical Maintenance Tasks
engineering
When produced in hard copy by the CAA as a CAP, AWN’s are published on White, Yellow and Pink paper depending on their priority. These colours signify the following:
White Paper – General Administrative Matters
Yellow Paper – Administrative and Technical Procedures
Pink Paper – Matters having a direct effect on airworthiness
engineering
To assist those with colour deficiencies, the three different sheet colours are identified in the contents sheets by three symbols. WhiteWhite paper is identified by an asterisk (*), Yellow by a dagger ( ) and Pink by a double ‘S’ ( ).§
†
engineering
The Role of the Joint Aviation The Role of the Joint Aviation Authority (Authority (JAAJAA).).
• National Aviation Authorities (National Aviation Authorities (NAANAA))
agreement to use common and detailed aviation requirements with a particular view to minimising Type Certification on joint ventures. The agreement also facilitated easier export and import procedures for aviation products and allowed for easier maintenance across the member states
What is the purpose of the JAA ?What is the purpose of the JAA ?
engineering
As a consequence aircraft certified, As a consequence aircraft certified, operated and maintained in any JAA operated and maintained in any JAA State will be accepted in any other State will be accepted in any other JAA state. JAA state.
It should be noted that not all regulations It should be noted that not all regulations have been harmonisedhave been harmonised
engineering
Composition of the JAAComposition of the JAA
The JAA is made up of 33 member states of which 21 are Full Members and 12 are what are termed, Candidate Members.
engineering
Current Full Member Authorities Current Full Member Authorities of the JAAof the JAA
AUSTRIAAUSTRIA GREECEGREECE POLANDPOLANDBELGIUMBELGIUM ICELANDICELAND PORTUGALPORTUGALCZECH REPUBLICCZECH REPUBLIC IRELANDIRELAND SPAINSPAINDENMARKDENMARK ITALYITALY SWEDENSWEDENFINLANDFINLAND LUXEMBOURGLUXEMBOURG SWITZERLANDSWITZERLANDFRANCEFRANCE NETHERLANDSNETHERLANDS TURKEYTURKEYGERMANYGERMANY NORWAYNORWAY UNITED KINGDOMUNITED KINGDOM
engineering
Current Candidate Member Current Candidate Member Authorities of the JAAAuthorities of the JAA
BULGARIABULGARIA HUNGARYHUNGARY MOLDOVAMOLDOVACYPRUSCYPRUS LATVIALATVIA MONACOMONACOESTONIAESTONIA ROMANIAROMANIA SLOVAKIASLOVAKIAMACEDONIAMACEDONIA MALTAMALTA SLOVENIASLOVENIA
engineering
What is the Aim of the JAA?What is the Aim of the JAA?
The aim of the JAA is to make recommendationsrecommendations, on civil aviation matters, to member Authorities. Member Authorities then have the option of deciding whether or not to adopt a particular requirement as their ‘Sole’‘Sole’ or ‘‘Optional’Optional’ code.
engineering
Joint Aviation RequirementsJoint Aviation Requirements (JAR)(JAR)
Joint Airworthiness Requirements are titled using numerical and alphabetical suffixes to the letters ‘JAR’.
For example:For example:
JAR-145, JAR-145,
JAR-OPS 1 JAR-OPS 2 or,JAR-OPS 1 JAR-OPS 2 or,
JAR-APU (Auxiliary Power Unit).JAR-APU (Auxiliary Power Unit).
engineering
ANO / ANRANO / ANR
BCARBCAR
Acceptable Means of Compliance (AMC)
Interpretative Explanatory Material (IEM).
JAR
Similar to
JARJARSimilar to
engineering
Example JAR’sExample JAR’s
Airworthiness StandardsAirworthiness Standards
JAR 1 Abbreviations & DefinitionsAbbreviations & DefinitionsJAR 21 Certification of Aircraft and Products Certification of Aircraft and Products
& Parts& PartsJAR 22 Sailplanes & Powered SailplanesJAR 23 Small AeroplanesJAR 25 Large AeroplanesLarge AeroplanesJAR 27 Small HelicoptersJAR 29 Large HelicoptersJAR APU Auxiliary Power UnitsJAR AWO All Weather OperationsJAR E EnginesJAR P PropellersJAR TSO Technical Standing OrdersJAR VLA Very Light Aircraft
engineering
Example JAR’sExample JAR’s
Maintenance ApprovalsMaintenance Approvals
JAR 66 Certifying Staff MaintenanceCertifying Staff Maintenance
JAR 145 Approved Maintenance OrganisationApproved Maintenance Organisation
JAR 147 JAR 147 Approved Maintenance Training / Approved Maintenance Training / ExaminationExamination
engineering
Example JAR’sExample JAR’s
JAR OPSJAR OPS Operations (in 4 Parts) :
1 - CAT Aeroplanes,1 - CAT Aeroplanes, 3 – CAT Helicopters3 – CAT Helicopters
JAR 26 Additional Airworthiness requirements for Operations
engineering
Role of JAA Role of JAA Full Member AuthoritiesFull Member Authorities
Full member Authorities, JAA/NAA are responsible for Full member Authorities, JAA/NAA are responsible for the maintenance of JAR’s in accordance with the the maintenance of JAR’s in accordance with the ‘Arrangements’ document.‘Arrangements’ document.
• Full member Authorities are represented on JAA committees and sub-committees.
• Committees monitor and make recommendations for amendment to JAR’s.
• Once accepted in principle these amendments are circulated in the form of a proposal (known as Notice of Proposed Amendment - NPA), for comment by the NAA and the aviation industry in general.
• What may be relevant and workable in the UK may
engineering
Role of JAA Role of JAA Full Member AuthoritiesFull Member Authorities
JAA/NAA who are full members will issue, on behalf of JAA/NAA who are full members will issue, on behalf of the JAA (in line with JAA / JAR requirements):the JAA (in line with JAA / JAR requirements):
ApprovalsApprovals
Aircraft Type CertificatesAircraft Type Certificates
Engineers Licences etc.Engineers Licences etc.
NOTENOTE
A Full member Authority may also carry out certification and approval within a JAA candidate states when invited
to do so.
engineering
The Role of JAA Candidate The Role of JAA Candidate Member AuthoritiesMember Authorities
Candidate Member Authorities are states in the Candidate Member Authorities are states in the process of developing full member statusprocess of developing full member status
Candidate members have authority to issue Approval Candidate members have authority to issue Approval certificates or Licences under JAA / JAR legislation. certificates or Licences under JAA / JAR legislation. Such Approvals or Licences so issued, under JAA / Such Approvals or Licences so issued, under JAA / JAR procedures, HOWEVER !!!! These may not be JAR procedures, HOWEVER !!!! These may not be recognised or accepted by other JAA full member recognised or accepted by other JAA full member Authorities.Authorities.
engineering
JARs – Relationship Between JAR–OPS, JAR-145, JAR-147, JAR-66,
and, when approved, JAR-Maintenance
JAR-OPS and JAR-145 are linked by the requirement for a JAR-OPS organisation being required to maintain its aircraft using a JAR-145 approved company
Similarly, for a company to issue engineers licences or approvals under JAR-66, that company needs to be JAR 147 approved
• A JAR 145 company must have sufficient Licenced Aircraft Maintenance Engineers (LAME)Licenced Aircraft Maintenance Engineers (LAME) to sign Release to Service documentation
engineering
JAR-OPSJAR-OPSJAR-OPS is currently divided into 4 Parts, they are:
JAR-OPS 1 - Commercial Air Transport (CAT), JAR-OPS 1 - Commercial Air Transport (CAT),
JAR-OPS 2 - General Aviation, JAR-OPS 2 - General Aviation,
JAR-OPS 3 - Commercial Air Transport JAR-OPS 3 - Commercial Air Transport (Helicopters) (Helicopters)
JAR-OPS 4 for General Aviation (Helicopters).JAR-OPS 4 for General Aviation (Helicopters).
engineering
JAR OPSJAR OPS
JAR-OPS 1, prescribes the operation of any civil aircraft in the CAT category by an operator whose principal place of business is within a JAA member state.
It does not apply to military, customs or police aircraft.
JAR-OPS 1 is also applicable to aircraft >10 Tonnes>10 Tonnes take off mass or aircraft with a maximum approved passenger approved passenger capability of 20capability of 20 or more.
engineering
“an operator shall not operate an aeroplane for the purpose of commercial air transportation other than in accordance with JAR-OPS Part 1JAR-OPS Part 1”.
The relationship to JAR-145 can be found at paragraph 1.875 of sub-part M to JAR-OPS 1. Here it clearly states that an operator cannot operate an aircraft unless it is maintained and released to service by an organisation approved or organisation approved or accepted in accordance with JAR 145accepted in accordance with JAR 145
engineering
JAR-145JAR-145- Approved Maintenance Approved Maintenance OrganisationOrganisation.
No aircraft of the CAT category may fly unless a Certificate of Certificate of Release to Service (CRS)Release to Service (CRS) has been issued by an approved maintenance organisation.
No organisation may issue a CRS unless it is a JAR-145 approved organisation, (or is working under the authority of a 145 approved organisation).
These rules also apply to aircraft componentsThese rules also apply to aircraft components.
engineering
JAR-66 - Certifying Staff MaintenanceJAR-66 - Certifying Staff Maintenance
JAR-66 was first issued on 3JAR-66 was first issued on 3rdrd April 1998 April 1998 and became effective on and became effective on 11stst June 1998 June 1998. .
Any person requiring to be approved to Any person requiring to be approved to issue a certificate of CRS after issue a certificate of CRS after 11stst June June 20012001 must comply with the requirements must comply with the requirements of JAR-66of JAR-66
However……personnel who qualified However……personnel who qualified under under BCAR Section LBCAR Section L requirements may requirements may continue to exercise their privileges for a continue to exercise their privileges for a period of period of 10 years, (until 2011). 10 years, (until 2011).
engineering
JAR-147 - Approved Maintenance JAR-147 - Approved Maintenance Training OrganisationsTraining Organisations
Any organisation wishing to Any organisation wishing to conduct training and/or conduct training and/or
examination to the JAR-66 examination to the JAR-66 requirements must be approved requirements must be approved
to to JAR-147 standardsJAR-147 standards
engineering
JAR-MaintenanceJAR-Maintenance
JAR-Maintenance, at the time of writing is on its fourth draft version
and is awaiting formal issue.
engineering