Post on 15-Apr-2017
transcript
hyperMILL Taiwan News
New hyperMILL 2016.1
© OPEN MIND Technologies AG. All rights reserved.
Long Chapter Title3X、 5X 等高精加工
3
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
4
© OPEN MIND Technologies AG. All rights reserved.
3X、 5X 等高精加工 : 由下而上加工
04.12.2015
5
© OPEN MIND Technologies AG. All rights reserved.
3X、 5X 等高精加工 : 由下而上加工
Long Chapter Title自由刀柄幾何
6
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
7
© OPEN MIND Technologies AG. All rights reserved.
自由刀柄幾何
04.12.2015
8
© OPEN MIND Technologies AG. All rights reserved.
自由刀柄幾何
04.12.2015
9
© OPEN MIND Technologies AG. All rights reserved.
自由刀柄幾何
04.12.2015
10
© OPEN MIND Technologies AG. All rights reserved.
自由刀柄幾何
Long Chapter Title3D 等高外型精加工 ：傾面加工規劃
11
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
12
© OPEN MIND Technologies AG. All rights reserved.
3D 等高外型精加工 ：傾面加工規劃
Long Chapter Title3D顏面等距精加工 ：環繞模式使用驅動面
13
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
14
© OPEN MIND Technologies AG. All rights reserved.
3D顏面等距精加工 ：環繞模式使用驅動面
Long Chapter TitleMAXX Machining
15
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
16
© OPEN MIND Technologies AG. All rights reserved.
MAXX Machining
■ 自動螺旋開槽 ■ 平面開粗
04.12.2015
17
© OPEN MIND Technologies AG. All rights reserved.
MAXX Machining
Long Chapter TitleMAXX Machining
18
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015新的刀具類型19
© OPEN MIND Technologies AG. All rights reserved.
桶型刀具 :
外型類似桶型的刀具 , 外型可以是一個很大的 R.(例如： R500 mm)
一般桶刀 切線桶刀
錐形桶刀
鏡形桶刀
04.12.2015Performance20
© OPEN MIND Technologies AG. All rights reserved.
Machining with a ball mill in hyperMILL®
■ Line-by-line milling
■ Low step over ratio
04.12.2015Performance21
© OPEN MIND Technologies AG. All rights reserved.
Machining with a conical barrel cutter in hyperMILL® ■ Line-by-line milling
■ High step over ratio with the same scallop height!
■ Increased tool life Time savings of up to
90% during finishing
04.12.2015
22
© OPEN MIND Technologies AG. All rights reserved.
5X切線平面加工
Long Chapter TitleCAD For CAM
23
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015
24
© OPEN MIND Technologies AG. All rights reserved.
經由 CAD坐標系直接轉 CAM坐標系
Long Chapter TitleCAD For CAM
25
© OPEN MIND Technologies AG. All rights reserved.
04.12.2015Analysis
© OPEN MIND Technologies AG. All rights reserved.
■ 分析 單一訊息 兩物件訊息
■ 2015.1 ■ 2016.1
www.facebook.com/CAM.software.hyperMILL
www.openmind-tech.com