NEXTIVA CLARITYNETWORK DIAGRAMS

support@nextiva.com

Leveraging aWireless Access PointThis network configuration is commonly used with the Nextiva Clarity™ NA250B device. Implementing a wireless connection using a secondary router is configured easily. Simply disable DHCP to modify the secondary router into a wireless access point.

Cable Modem/DSL Gateway

(Gateways require an IP Passthrough)

Nextiva Clarity Device(Modem – DHCP)

(Gateway – Static IP)LAN – 192.168.1.1

Network Switch(Required)

Internet(ISP)

DHCP DHCP

Wireless Access Point RouterConnect Switch to LAN port on device

Disable DHCPWi-Fi SSID Enabled

(Wireless)DHCP

(Wireless)DHCP