2
Leveraging aWireless Access PointThis network configuration is commonly used with the Nextiva Clarity™ NA250B device. Implementing a wireless connection using a secondary router is configured easily. Simply disable DHCP to modify the secondary router into a wireless access point.
Cable Modem/DSL Gateway
(Gateways require an IP Passthrough)
Nextiva Clarity Device(Modem – DHCP)
(Gateway – Static IP)LAN – 192.168.1.1
Network Switch(Required)
Internet(ISP)
DHCP DHCP
Wireless Access Point RouterConnect Switch to LAN port on device
Disable DHCPWi-Fi SSID Enabled
(Wireless)DHCP
(Wireless)DHCP
