Post on 17-Jul-2020
transcript
The latest generation of technology from Norton. With a laser-welded segment height of .590” and newly developed bond and diamond specification, this blade maximizes cutting performance and product life. The patent-pending silent steel-center has outstanding noise absorbing capabilities. Typical laser-cut steel-center blades provide a noise reduction of approximately 3 dB(A), and the laminated copper sandwich steel-center only slightly more at 6dB(A). The Silencio stands above the industry standard by reaching levels of up to 15 dB(A)!
Norton Silencio Diamond Blades
L E S S N O I S E
30XUP TO
FEATURES AND BENEFITS ❚ Specially developed patent pending silent
steel-center, cutting edge new vibration-absorbent material for noise reduction of up to 15 dB(A) than the traditional copper sandwich or laser-cut core blades
❚ Optimized sound-dampening geometry for elimination of the whistle-effect with a blade guard during operation
❚ A tall .590” laser welded segment results in longer blade life and faster cut
❚ Trapezoidal segment shape has lower impacts on materials improving quality of cut similar to a continuous rim blade cut.
❚ Smoother operating for less operator fatigue and better debris removal from cut improving blade life and free cutting
❚ New diamond and bond specification created for masonry, flat or high speed hand saw applications is extremely fast cutting in a large variety of materials
ALL THE MUSCLE YOU NEEDTM
SILENCIO... SILENCE IS GOLDEN!
DIAMOND BLADES
SAFER FOR HIGH TRAFFIC AREAS AND LESS DISRUPTIVE TO WORK LOCATIONSResidential areas, city centers, schools and hospitals are especially sensitive to noise with more and more local
regulations preventing excessive noise levels. The use of a quieter diamond blade is a perfect solution to drastically
reduce the sound generated directly at the job site. The new Norton Silencio provides an unprecedented noise-
dampening effect, reaching reductions of up to 15 dB(A).
Diamond blades generate noise due to the air flowing through the gullets while in operation. The Silencio has two
complementing patent pending dampening technologies. The oscillation absorbing steel-center and offset gullets
are designed to prevent airflow under the blade guard to cancel the whistling noise created by traditional blades. The
graph below shows the noise made by an idle running masonry saw, noise generated by a standard diamond blade and
then the exceptional performance of the new Norton Silencio!
UPC PART # SIZE MAX RPM SEGMENT SPECSILENCIO – MASONRY701846 84534 2 SILMBR14125 14 x .125 x 1 4365 .590"701846 84535 9 SILMBR20125 20 x .125 x 1 3055 .590"SILENCIO – FLAT SAW701846 84550 2 SILW14125 14 x .125 x 1 4365 / 35HP Saw .590"SILENCIO – HIGH SPEED701846 84520 5 SIL12125 12 x .125 x 1 6300 .590"701846 84521 2 SIL14125 14 x .125 x 1 5460 .590"
Sound levels are defined by their frequency in Hertz (Hz) and measured in decibels, dB(A) on sonometers. The scale to the right starts a 0 dB(A) level, which is the weakest level the human ear can perceive. A normal conversation is at a 50 dB(A) level and the harmful threshold starts at 85 dB(A). At 120 dB(A), noise can start to cause pain. Continuous exposure at lower levels may take longer but the results are the same, permanent irreversible hearing loss. Attending a rock concert with a 115 dB(A) noise level is the same as a standard diamond blade being used on a masonry, flat or hand held saw.
Example on a masonry saw cutting concrete
With a standard blade With Norton Silencio Machine running idle
SILENCIO
New offset gullet design reduces cutting noise by as much as 15 dB(A).
THE SILENCIO IS AVAILABLE IN MASONRY, FLAT SAW AND HIGH SPEED CUT-OFF SAW SPECIFICATIONS.
L E S S N O I S E
30XUP TO
USA CUSTOMER SERVICE:Toll Free Phone: 1 (800) 554-8003Toll Free Fax: 1 (800) 443-1092
CANADA CUSTOMER SERVICE:Toll Free Phone: 1 (800) 263-6565Toll Free Fax: 1 (800) 561-9490
FORM #8123 F REV. 02/14 © Saint-Gobain February 2014.Norton is a registered trademark; Silencio and All The Muscle You Need are trademarks of Saint-Gobain.
www.facebook.com/NortonConstruction | www.youtube.com/NortonConstruction | www.nortonconstructionproducts.comALL THE MUSCLE YOU NEEDTM
PRIMARY SPONSOR