Post on 19-Feb-2021
transcript
Architecture
Interior Design
Graphic Design
Facility Planning
Jeff Gillam
Charles Renz Mark Regier
Maggie Gillam
Chris Gillam
730 N. Ninth (67401) P.O. Box 2928 Salina, KS 67402-2928 (785) 827-0386 Fax (785) 827-0392
NOTICE TO ALL CONTRACTORS AND SUB-CONTRACTORS – May 6, 2020
Salina Educational Automotive Museum of America, Salina, KS – Project # 18-2946
ADDENDUM NO. 1 YOU ARE INSTRUCTED TO READ AND TO NOTE THE FOLLOWING DESCRIBED CHANGES, CORRECTIONS, CLARIFICATIONS, OMISSIONS, DELETIONS, ADDITIONS, APPROVALS AND STATEMENTS PERTINENT TO THE CONTRACT AND CONSTRUCTION DOCUMENTS. THIS ADDENDUM IS A PART OF THE CONTRACT AND CONSTRUCTION DOCUMENTS AND SHALL GOVERN IN THE PERFORMANCE OF THE WORK. Bid Date: Thursday, May 14, 2020 at 2:00 pm
GENERAL
1. Attached with this addendum is the Pre-Bid Sign-in Sheet from meeting held on 5/5/2020.
2. Bid Form – Due to addendum changes, a revised Bid Form will be issued to General Contractors prior to the bid date.
ARCHITECTURAL –Specifications
1. Section 01270 Unit Prices – Add the attached section in its entirety. 2. Section 07272 Fluid-Applied, Vapor-Permeable Membrane Air Barriers – Paragraph 2.01.A. – Include W.R. Meadows
Air-Shield LMP as an approved product for binding purposes. All products and installation must meet or exceed specifications.
3. Section 07611 Pre-Manufactured Sheet Metal Roofing – Part 2 Products – Include Firestone as an approved Manufacturer for roofing and soffit panel, along with associated trim.
4. Section 08111 Standard Steel Doors and Frames – Paragraph 2.1 – Include Mesker as an approved manufacturer for bidding purposes. All products must meet specification.
5. Section 09400 Resinous Flooring – Paragraph1.2 – Delete reference to Double Broadcast. System shall be Trowel Grade – Basis of Specification is Desco Quartz Cremona TG.
6. Section 09400 Resinous Flooring – 2.1.A.1. Manufacturers - include Stonhard as an approved manufacturer for bidding purposes. All products must meet or exceed specifications.
7. Section 09400 Resinous Flooring – 2.1.A.1. Manufacturers - Include Tennant as an approved manufacturer for bidding purposes. All products must meet or exceed specifications.
8. Section 09650 Resilient Flooring - Paragraph 3.03 Stair Coverings – Clarification – There are no rubber stair treads included in this project.
9. Section 09650 Resilient Flooring, Paragraph 3.05.F – Delete reference to basket weave installation. Vinyl plank flooring shall be laid with staggered end joints, random length.
10. Section 09900 – Painting, Interior paint schedule – Item 8, Steel and Wood Roof Structure and Components – Dryfall paint at all areas shall be alkyd dryfall, eg-shel finish. Intended color is to be dark gray/charcoal, final color to be selected.
11. Section 10431 – Signage – 1.02.A – The allowance amount should be $20,000, in lieu of $15,000. 12. Section 10850 – Building Specialties – 1.02.B – Delete this paragraph in its entirety. Signage allowance shall be as
identified in Section 10431 Signage.
ARCHITECTURAL – Drawings 1. Sheets A2.1 and A2.2 Floor Plans – Reference the attached revised sheets A2.1 and A2.2 showing the addition of stud
and drywall display walls located Kustom Kemps Expansion Gallery 107 and Gallery 137. 2. Sheets A4.1-A4.6, Wall Sections – At Area B, new construction clerestory windows shall be window units in lieu of
aluminum storefront. Reference specification section 08520 Aluminum Windows, for window types. 3. Sheets A4.5 and A4.6 Wall Sections – At clerestory roofs, delete reference to tongue and groove ceiling finish. Finished
ceiling is to be dryfall painted acoustical roof deck. Roof deck profile is shown on structural detail H/S3.1. 4. Sheet A5.1, Detail A Area A, B, and C Roof Plan – Contractor shall remove existing roof materials to original wood deck.
Perform all cleaning and prep as required to install new roof systems components. 5. Sheet A5.1, Detail A Area A, B, and C Roof Plan – Contractor shall provide tapered insulation crickets between all
building sections to ensure positive drainage to roof scuppers. 20 year warranty shall be maintained. 6. Sheet A5.1, Detail A Area A, B, and C Roof Plan – In lieu of retaining existing roof curbs, contractor shall remove all
existing skylight roof curbs in their entirety. Infilled roof areas shall be per the structural details. 7. Sheet A7.1, Detail a Reflected Ceiling Plan - Where Axion ceiling trim is indicated, the trim sections shall be 4” tall, run
in maximum permissible lengths. 8. Sheet A7.1, Detail a Reflected Ceiling Plan – Clarification. Where existing structure at gallery areas is to be exposed and
painted, the contractor shall thoroughly clean the existing components using compressed air to provide a clean surface suitable for final finish. Remove incidental dirt or debris by hand or other method as required to get rid of anything that will prevent the bonding of paint finish.
9. Sheet A8.1, Restroom Elevations – Restroom floors are to be Epoxy Resin system with 6” integral cove base. The wall tile shall begin just above the floor base. Install Schluter trim at bottom edge of tile, just above the resin base.
10. Sheet A8.2, Detail A – Snack Bar Elevations – Snack Bar floors are to be Epoxy Resin system with 6” integral base at all walls. Rubber base shall be located only at the toe-kick area of the base cabinets.
11. Sheet A9.1 and A9.3 Interior Elevations – Reference the attached revised sheets A9.1 and A9.3 identifying the stud and drywall display walls at Galleries 107 and 137.
12. Sheet A10.1, Interior Finish Schedule – Note the following Changes and/or Clarifications to the Finish Schedule: A. Gallery 137 – The stairs to the North Gallery area shall be polished concrete finish to match floors as
closely as possible. B. Women’s Restroom 126 – Base to be self-cove Epoxy in lieu of ceramic tile. C. Men’s Restroom 127 – Base to be self-cove Epoxy in lieu of ceramic tile.
13. Sheet A10.1, Glazing Schedule – A3 Glazing type, delete reference to diffused glass. Glass shall be insulated and tempered.
14. Sheet A10.1, Glazing Schedule – Clarification, All interior glazing shall be clear. All exterior glazing shall be tinted. 15. Section 10.1, Door Schedule – Door 136 shall be type A door with clear, tempered glazing.
MECHANICAL
1. Section 233100, HVAV Ducts and Casings – Replace section with attached.
MECHANICAL – Drawings 1. Sheet M1.4, Area A & B domestic Water Plan – Hot water pipe at Snack Bar 123 is incorrectly indicated as 2”. Provide a ¾” pipe in lieu of the
2” that is indicated. 2. Sheet M6.1, Gas Fired Rooftop Unit Schedule – Units are to be provided with ECM or variable speed motors. RTU01, 2, 3, 4, 6, and 7 are to be
capable of single zone VAV operation with staged compressors. ELECTRICAL – Specifications 1. Section 2.1.B, Manufacturers include Honeywell Fire-Lite as an approved manufacturer for bidding purposes. All products must meet or
exceed specifications. Receipt of this Addendum shall be noted on the Bid Form. END OF ADDENDUM NO. 1 Attachments Pre-Bid Meeting Attendees Section 01270 Unit Prices Section 233100 HVAC Ducts and Casings Revised Sheets A2.1 and A2.2 Revised Sheets A9.1 and A9.3
Salina Educational Automotive Museum of America 01270-1 Unit Prices Salina, KS JGR 18-2946
SECTION 01270
UNIT PRICES
PART 1 - GENERAL
1. GENERAL A. Work contemplated under various proposed Unit Prices shall include all labor, materials,
equipment and services necessary for, or incidental to, completion of all Work under each item. B. Unit Prices shall comply with similar conditions of the Drawings and Specifications provided
under the Base Bid. C. Furnish separate Bids for each Unit Price in the space provided on the Form of Bid stating the
amount to ADD to the Base Bid in the event of acceptance. D. Each Unit Price proposed shall include all ultimate costs for all omissions, additions, substitutions
and adjustments made by all trades involved.
2. UNIT PRICES
A. Unit Prices generally will not be considered in determining the lowest responsible Bidder for the Project. However, if the Owner feels the low Bidder has submitted an inordinately high unit price, it may factor in an estimated number of units and calculate the total unit prices. If this is done, the lowest responsible bidder will be determined by comparing the Base Bid, Alternates if any, and the Unit Price calculation.
B. Unit Prices shall be as listed below:
1. UNIT PRICE NO. 1 Remove unsuitable soil and replace with low volume change material. Existing unsuitable soil shall be excavated and removed from site. New material shall meet the requirements of the geotechnical report. New material shall be placed in lifts as required by the geotechnical report. The Base Bid shall include all removal, replacement, and conditioning as identified by the geotechnical report. The unit pricing is for incidental areas that are not identified, described, or could not be interpreted from the geotechnical investigation.
Add $ /C.Y.
END OF SECTION 01270
Salina Educational Automotive Museum of AmericaSalina, KS
233100 - 1 LST 19088HVAC DUCTS AND CASINGS
SECTION 233100HVAC DUCTS AND CASINGS
PART 1 GENERAL1.1 SECTION INCLUDES
A. Metal ductwork.B. Nonmetal ductwork.C. Duct cleaning.
1.2 RELATED REQUIREMENTSA. Section 230713 - Duct Insulation: External insulation and duct liner.B. Section 233300 - Air Duct Accessories.C. Section 233600 - Air Terminal Units.D. Section 233700 - Air Outlets and Inlets.E. Section 230593 - Testing, Adjusting, and Balancing for HVAC.
1.3 REFERENCE STANDARDSA. ASHRAE (FUND) - ASHRAE Handbook - Fundamentals; Most Recent Edition Cited by Referring
Code or Reference Standard.B. ASTM A36/A36M - Standard Specification for Carbon Structural Steel; 2014.C. ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process; 2017.D. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials; 2018.E. ICC-ES AC01 - Acceptance Criteria for Expansion Anchors in Masonry Elements; 2015.F. ICC-ES AC106 - Acceptance Criteria for Predrilled Fasteners (Screw Anchors) in Masonry Elements;
2015.G. ICC-ES AC193 - Acceptance Criteria for Mechanical Anchors in Concrete Elements; 2015.H. ICC-ES AC308 - Acceptance Criteria for Post-Installed Adhesive Anchors in Concrete Elements; 2016.I. NFPA 90A - Standard for the Installation of Air-Conditioning and Ventilating Systems; 2018.J. NFPA 96 - Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations;
2017.K. SMACNA (DCS) - HVAC Duct Construction Standards Metal and Flexible; 2005 (Revised 2009).L. SMACNA (KVS) - Kitchen Ventilation Systems and Food Service Equipment Fabrication and
Installation Guidelines; 2001.M. SMACNA (LEAK) - HVAC Air Duct Leakage Test Manual; 2012.
1.4 PERFORMANCE REQUIREMENTSA. No variation of duct configuration or sizes permitted except by written permission. Size round ducts
installed in place of rectangular ducts in accordance with ASHRAE table of equivalent rectangular andround ducts.
1.5 SUBMITTALSA. See Division 1 Section - Administrative Requirements, for submittal procedures.B. Product Data: Provide data for duct materials.C. Project Record Documents: Record actual locations of ducts and duct fittings. Record changes in
fitting location and type. Show additional fittings used.
Salina Educational Automotive Museum of AmericaSalina, KS
233100 - 2 LST 19088HVAC DUCTS AND CASINGS
1.6 FIELD CONDITIONSA. Do not install duct sealants when temperatures are less than those recommended by sealant
manufacturers.B. Maintain temperatures within acceptable range during and after installation of duct sealants.
PART 2 PRODUCTS2.1 DUCT ASSEMBLIES
A. Regulatory Requirements: Construct ductwork to NFPA 90A standards.2.2 MATERIALS
A. Galvanized Steel for Ducts: Hot-dipped galvanized steel sheet, ASTM A653/A653M FS Type B, withG60/Z180 coating.
B. Joint Sealers and Sealants: Non-hardening, water resistant, mildew and mold resistant.1. Type: Heavy mastic or liquid used alone or with tape, suitable for joint configuration and
compatible with substrates, and recommended by manufacturer for pressure class of ducts.2. Surface Burning Characteristics: Flame spread of zero, smoke developed of zero, when tested in
accordance with ASTM E84.3. For Use With Flexible Ducts: UL labeled.
C. Hanger Rod: ASTM A36/A36M; steel, galvanized; threaded both ends, threaded one end, orcontinuously threaded.
D. Hanger Fasteners: Attach hangers to structure using appropriate fasteners, as follows:1. Concrete Wedge Expansion Anchors: Complying with ICC-ES AC193.2. Masonry Wedge Expansion Anchors: Complying with ICC-ES AC01.3. Concrete Screw Type Anchors: Complying with ICC-ES AC193.4. Masonry Screw Type Anchors: Complying with ICC-ES AC106.5. Concrete Adhesive Type Anchors: Complying with ICC-ES AC308.
E. Insulated Flexible Ducts:1. Two ply vinyl film supported by helically wound spring steel wire; fiberglass insulation;
polyethylene vapor barrier film.a. Pressure Rating: 10 inches WG positive and 1.0 inches WG negative.b. Maximum Velocity: 4000 fpm.c. Temperature Range: -10 degrees F to 160 degrees F.
F. Joint Sealers and Sealants: Non-hardening, water resistant, mildew and mold resistant.2.3 DUCTWORK FABRICATION
A. Fabricate and support in accordance with SMACNA HVAC Duct Construction Standards - Metal andFlexible, and as indicated.
B. No variation of duct configuration or size permitted except by written permission. Size round ductinstalled in place of rectangular ducts in accordance with ASHRAE Handbook - Fundamentals.
C. Provide duct material, gages, reinforcing, and sealing for operating pressures indicated.D. Construct T's, bends, and elbows with radius of not less than 1-1/2 times width of duct on centerline.
Where not possible and where rectangular elbows must be used, provide air foil turning vanes ofperforated metal with glass fiber insulation.
E. Provide air foil turning vanes when rectangular elbows must be used.F. Increase duct sizes gradually, not exceeding 15 degrees divergence wherever possible; maximum 30
degrees divergence upstream of equipment and 45 degrees convergence downstream.G. Fabricate continuously welded round and oval duct fittings in accordance with SMACNA HVAC Duct
Construction Standards - Metal and Flexible.
Salina Educational Automotive Museum of AmericaSalina, KS
233100 - 3 LST 19088HVAC DUCTS AND CASINGS
H. Provide high efficiency 45 degree wye takeoffs for all branch ducts in medium and low pressuresystems.
I. Where ducts are connected to exterior wall louvers and duct outlet is smaller than louver frame, provideblank-out panels sealing louver area around duct. Use same material as duct, painted black on exteriorside; seal to louver frame and duct.
2.4 MANUFACTURED DUCTWORK AND FITTINGSA. Manufacture in accordance with SMACNA HVAC Duct Construction Standards - Metal and Flexible,
and as indicated. Provide duct material, gages,reinforcing, and sealing for operating pressuresindicated.
B. Flat Oval Ducts: Machine made from round spiral lockseam duct.1. Manufacture in accordance with SMACNA (DCS).2. Fittings: Manufacture at least two gages heavier metal than duct.3. Manufacturers:
a. Wesco.b. Wichita Sheet Metal.
C. Double Wall Insulated Flat Oval Ducts: Machine made from round spiral lockseam duct.1. Manufacture in accordance with SMACNA (DCS).2. Fittings: Manufacture with solid inner wall.3. Inner wall: Perforated galvanized steel.4. Insulation:
a. Thickness: 1 inch fiberglass.D. Spiral Ducts: Machine made from round spiral lockseam duct, steel with mill phosphatized finish.
1. Manufacturers:a. Wescob. Wichita Sheet Metal
E. Double Wall Insulated Spiral Ducts: Machine made from round spiral lockseam duct, steel outer wallwith mill phosphatized finish, 1 inch thick fiberglass insulation, perforated galvanized steel inner wall;fittings manufactured with solid inner wall.1. Manufacturers:
a. Wescob. Substitute approved by Engineer.
F. Flexible Ducts: Two ply vinyl film supported by helically wound spring steel wire.1. Insulation: Fiberglass insulation with polyethylene vapor barrier film.2. Pressure Rating: 10 inches WG positive and 1.0 inches WG negative.3. Maximum Velocity: 4000 fpm.4. Temperature Range: Minus 10 degrees F to 160 degrees F.
G. Transverse Duct Connection System: SMACNA "E" rated rigidly class connection, interlocking angleand duct edge connection system with sealant, gasket, cleats, and corner clips.1. Manufacturers:
a. Ductmate Industries, Inc, a DMI Company: www.ductmate.com/#sle.b. Substitutions: See Section 016000 - Product Requirements.
H. Round Duct Connection System: Interlocking duct connection system in accordance with SMACNA(DCS).1. Manufacturers:
a. Ductmate Industries, Inc, a DMI Company: www.ductmate.com/#sle.b. Substitutions: See Section 016000 - Product Requirements.
https://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTR
Salina Educational Automotive Museum of AmericaSalina, KS
233100 - 4 LST 19088HVAC DUCTS AND CASINGS
PART 3 EXECUTION3.1 INSTALLATION
A. Install, support, and seal ducts in accordance with SMACNA HVAC Duct Construction Standards -Metal and Flexible.
B. Install in accordance with manufacturer's instructions.C. During construction provide temporary closures of metal or taped polyethylene on open ductwork to
prevent construction dust from entering ductwork system.D. Duct sizes indicated are inside clear dimensions. For lined ducts, maintain sizes inside lining.E. Install and seal metal and flexible ducts in accordance with SMACNA HVAC Duct Construction
Standards - Metal and Flexible.F. Provide openings in ductwork where required to accommodate thermometers and controllers. Provide
pilot tube openings where required for testing of systems, complete with metal can with spring device orscrew to ensure against air leakage. Where openings are provided in insulated ductwork, installinsulation material inside a metal ring.
G. Locate ducts with sufficient space around equipment to allow normal operating and maintenanceactivities.
H. Use crimp joints with or without bead for joining round duct sizes 8 inch and smaller with crimp indirection of air flow.
I. Use double nuts and lock washers on threaded rod supports.J. Connect flexible ducts to metal ducts with draw bands and sealant plus sheet metal screws. Use a
maximum of 5' of flexible duct, at final connection to diffusers only, free of kinks. Do not install aboveinaccessible ceilings. Do not use flexible ductwork in exposed areas.
K. During construction provide temporary closures of metal or taped polyethylene on open ductwork toprevent construction dust from entering ductwork system.
L. Exposed spiral ductwork shall be supported from top chord of structural members, utilizing steel cablehangers and adjustable cable clamps.
3.2 CLEANINGA. Clean duct system and force air at high velocity through duct to remove accumulated dust. To obtain
sufficient air, clean half the system at a time. Protect equipment that could be harmed by excessive dirtwith temporary filters, or bypass during cleaning.
3.3 SCHEDULESA. Ductwork Material:
1. Low Pressure Supply: Steel.2. Return and Relief: Steel.3. General Exhaust: Steel.4. Outside Air Intake: Steel.5. At contractor's option, phenolic ductwork may be used for supply and return ductwork in medium
and low pressure systems.6. Dishwasher exhaust: aluminum or stainless steel7. Type II hood exhaust: stainless steel.
B. Ductwork Pressure Class:1. Low Pressure Supply: 1 inch.2. Return and Relief: 1 inch.3. General Exhaust: 1/2 inch.
C. Round and oval ductwork shall be double wall spiral where exposed. Provide a deduct alternate to usesingle wall spiral. Concealed ductwork may be spiral or fabricated.
https://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTR
Salina Educational Automotive Museum of AmericaSalina, KS
233100 - 5 LST 19088HVAC DUCTS AND CASINGS
D. Exposed ductwork shall utilize flanged connection system.END OF SECTION
https://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTRhttps://global.ihs.com/doc_detail.cfm?rid=BSD&document_name=SMACNA%20HVAC%20DUCT%20CONSTR
A2.1
SA
LIN
A E
DU
CA
TIO
NA
L A
UT
OM
OT
IV
E M
US
EU
M o
f A
ME
RIC
A
MU
SE
UM
A
DD
IT
IO
N &
R
EM
OD
EL
SA
LIN
A,
KA
NS
AS
Arch
ite
cts P
la
nn
ers D
esig
ne
rs
JO
NE
S G
IL
LA
M R
EN
Z
A
AREAS A & B FLOOR PLAN
B
COLUMN DETAIL
C
COLUMN DETAIL
D
COLUMN DETAIL
E
COLUMN DETAIL
F
COLUMN DETAIL
GENERAL NOTES
AutoCAD SHX TextBENCH
AutoCAD SHX TextESTCODE
AutoCAD SHX TextTICKETING GUEST SERVICES
AutoCAD SHX TextREAR PROJECTION SCREEN
AutoCAD SHX TextAUTO TURNTABLE
AutoCAD SHX TextPHOTO MURAL
AutoCAD SHX TextKUSTOM KEMPS WALL OF FAME
AutoCAD SHX TextPHOTO MURAL
AutoCAD SHX TextKUSTOM KEMPS MARQUEE
AutoCAD SHX TextKUSTOM KEMPS SIGNATURE CAR
AutoCAD SHX TextTEASER CAR #2
AutoCAD SHX TextRAIL
AutoCAD SHX TextRAIL
AutoCAD SHX TextREAR PROJECTION SCREEN
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextTEASER CAR #1
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextEXISTING BUILDING
AutoCAD SHX TextMATCHLINE
AutoCAD SHX TextMATCHLINE
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX Text3
AutoCAD SHX Text1
AutoCAD SHX Text5
AutoCAD SHX Text4
AutoCAD SHX TextEXISTING CURB & GUTTER TO REMAIN
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX TextALLEY
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX TextB
AutoCAD SHX TextC
AutoCAD SHX Text7
AutoCAD SHX Text9
AutoCAD SHX Text(E) RECESSED RAMP TO BE FILLED IN
AutoCAD SHX TextRAMP TO BE FILLED IN
AutoCAD SHX TextPIT TO BE FILLED IN
AutoCAD SHX Text2
AutoCAD SHX Text8
AutoCAD SHX TextD
AutoCAD SHX TextA
AutoCAD SHX Text1
AutoCAD SHX Text4
AutoCAD SHX Text9
AutoCAD SHX Text3
AutoCAD SHX Text6
AutoCAD SHX Text1'-6"
AutoCAD SHX Text1'-6"
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING @ EXTERIOR.
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextA-A8.1
AutoCAD SHX TextSLOPE UP 1:12
AutoCAD SHX TextRAMP UP
AutoCAD SHX TextSLOPE UP 1:12
AutoCAD SHX TextSLOPE UP 1:12
AutoCAD SHX TextSLOPE UP 1:12
AutoCAD SHX TextLANDSCAPE ROCK AREA
AutoCAD SHX TextEDGE OF EXISTING PAVEMENT
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextUP
AutoCAD SHX TextUP
AutoCAD SHX TextUP
AutoCAD SHX TextUP
AutoCAD SHX TextESTCODE
AutoCAD SHX TextESTCODE
AutoCAD SHX TextESTCODE
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX Text100'-0"
AutoCAD SHX Text100'-9"
AutoCAD SHX TextSLOPE UP 1:12
AutoCAD SHX Text100'-9"
AutoCAD SHX Text100'-0"
AutoCAD SHX TextREMOVEABLE RAIL
AutoCAD SHX TextNEW FACE BRICK TO MATCH EXIST. ON NEW CONC FOOTING
AutoCAD SHX TextNEW FACE BRICK TO MATCH EXIST. ON EXIST. LEDGE
AutoCAD SHX TextNEW FACE BRICK TO MATCH EXIST. ON EXIST. LEDGE
AutoCAD SHX TextRAMP UP
AutoCAD SHX TextB
AutoCAD SHX TextC
AutoCAD SHX TextD
AutoCAD SHX TextA
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextFLUME
AutoCAD SHX TextFLUME
AutoCAD SHX Text6" CONCRETE FILLED PIPE BOLLARDS REF. B-A1.1
AutoCAD SHX TextEXISTING PARKING LOT
AutoCAD SHX TextEXISTING PARKING LOT
AutoCAD SHX Text6" CONCRETE FILLED PIPE BOLLARDS REF. B-A1.1
AutoCAD SHX TextEXISTING CONCRETE
AutoCAD SHX TextFEC
AutoCAD SHX TextFEC
AutoCAD SHX TextFEC
AutoCAD SHX TextFEC
AutoCAD SHX TextNEW FACE BRICK TO MATCH EXIST. ON NEW CONC FOOTING
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT & PVC HUB REF. C-A5.1
AutoCAD SHX TextLAMBS TONGUE
AutoCAD SHX TextLAMBS TONGUES
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextLANDSCAPE ROCK AREA
AutoCAD SHX TextLAMBS TONGUES
AutoCAD SHX TextBENCH
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX Text26'-0"
AutoCAD SHX Text26'-0"
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX Text4
AutoCAD SHX TextA
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) BOTH SIDES OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) OVER 1 5/8" MTL STUDS
AutoCAD SHX TextSTEEL COLUMN REF. STRUCT.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING WHERE INDICATED ON PLAN
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) BOTH SIDES OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX TextB
AutoCAD SHX Text4
AutoCAD SHX TextSTEEL COLUMN REF. STRUCT., PAINTED
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) OVER 3 5/8" MTL STUDS @ 16"O.C.
AutoCAD SHX Text2 1/2" MTL STUDS
AutoCAD SHX Text1/4" JOINT & SEALANT
AutoCAD SHX Text1/4" JOINT & SEALANT
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING WHERE INDICATED ON PLAN
AutoCAD SHX TextALTERNATE - THIN - THIN BRICK FINISH OVER TILE BACKER BOARD. BASE BID - " - " 58" TYPE X G.B. OVER OVER 3 " MTL STUDS @ 58" MTL STUDS @ 16"O.C.
AutoCAD SHX TextB
AutoCAD SHX Text7
AutoCAD SHX Text3 1/2" BATT INSUL.
AutoCAD SHX TextSTEEL COLUMN REF. STRUCT.
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) OVER 3 5/8" MTL STUDS @ 16"O.C.
AutoCAD SHX TextFILL VOID W/ BATT INSUL.
AutoCAD SHX TextALTERNATE - THIN BRICK - THIN BRICK FINISH OVER TILE BACKER TILE BACKER BOARD. BASE BID - " TYPE X - " TYPE X 58" TYPE X G.B. OVER 3 " MTL STUDS OVER 3 " MTL STUDS 58" MTL STUDS @ 16"O.C.
AutoCAD SHX TextA
AutoCAD SHX TextSTEEL COLUMN REF. STRUCT.
AutoCAD SHX Text3
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) BOTH SIDES OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) BOTH SIDES OVER 3 1/2" MTL STUDS @ 16"O.C.
AutoCAD SHX Text3 1/2" BATT INSUL.
AutoCAD SHX Text5/8" TYPE X G.B. (M.R. @ WET AREAS) BOTH SIDES OVER 3 1/2" MTL STUDS @ 16"O.C.
AutoCAD SHX TextA
AutoCAD SHX Text9
AutoCAD SHX TextR21 BATT INSUL.
AutoCAD SHX TextFACE BRICK TO MATCH EXISTING W/ BRICK TIES @ 24" HORIZ & 16" VERT. & WEEP HOLES
AutoCAD SHX Text1 " CONT. RIGID 12" CONT. RIGID INSUL (R7.5)
AutoCAD SHX TextLIQUID APPLIED AIR/ VAPOR BARRIER OVER OVER 5/8" DENSGLASS SHEATHING
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX TextSTEEL COLUMN REF. STRUCT.
AutoCAD SHX Text5/8" TYPE X G.B. OVER 3 5/8" MTL STUDS @ 16"O.C.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING WHERE INDICATED ON PLAN
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text18-2946
AutoCAD SHX TextJOB:
AutoCAD SHX TextC
AutoCAD SHX TextCOPYRIGHTED
AutoCAD SHX TextDATE:
AutoCAD SHX TextSHEET:
AutoCAD SHX Text730 N. Ninth
AutoCAD SHX Text785.827.0386 jgr@jgrarchitects.com
AutoCAD SHX TextSalina, KS 67402
AutoCAD SHX Text1800 Wyandotte St.,
AutoCAD SHX TextKansas City, MO 64108
AutoCAD SHX TextP.O. BOX 2928
AutoCAD SHX TextSuite 102
AutoCAD SHX TextNorth
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX TextGALLERIES
AutoCAD SHX Text137
AutoCAD SHX TextSTORAGE
AutoCAD SHX Text141
AutoCAD SHX TextOFFICE
AutoCAD SHX Text139
AutoCAD SHX TextMAINT.
AutoCAD SHX TextGALLERY
AutoCAD SHX Text136
AutoCAD SHX TextINTRODUCTION
AutoCAD SHX TextRETAIL
AutoCAD SHX Text134
AutoCAD SHX TextROOM
AutoCAD SHX Text132
AutoCAD SHX TextCOAT
AutoCAD SHX TextVESTIBULE
AutoCAD SHX Text100
AutoCAD SHX TextVESTIBULE
AutoCAD SHX Text131
AutoCAD SHX TextLOBBY
AutoCAD SHX Text101
AutoCAD SHX TextMULTI-PURPOSE
AutoCAD SHX Text103
AutoCAD SHX TextSTORAGE
AutoCAD SHX Text108
AutoCAD SHX TextSNACK BAR
AutoCAD SHX Text123
AutoCAD SHX TextHALL OF FAME
AutoCAD SHX Text104
AutoCAD SHX TextKUSTOM KEMP'S
AutoCAD SHX TextMEN
AutoCAD SHX Text127
AutoCAD SHX TextWOMEN
AutoCAD SHX Text126
AutoCAD SHX TextJAN
AutoCAD SHX Text128
AutoCAD SHX TextROOM
AutoCAD SHX Text112
AutoCAD SHX TextCONFERENCE
AutoCAD SHX TextHALL
AutoCAD SHX Text117
AutoCAD SHX TextSTORAGE
AutoCAD SHX Text109
AutoCAD SHX TextELEC
AutoCAD SHX Text122
AutoCAD SHX TextWKRM
AutoCAD SHX Text119
AutoCAD SHX TextOFFICE
AutoCAD SHX Text118
AutoCAD SHX TextSTORAGE
AutoCAD SHX Text113
AutoCAD SHX TextSHOW GALLERY ONE
AutoCAD SHX Text106
AutoCAD SHX TextKUSTOM KEMP'S
AutoCAD SHX TextEXPANSION GALLERY
AutoCAD SHX Text107
AutoCAD SHX TextKUSTOM KEMP'S
AutoCAD SHX TextHALL
AutoCAD SHX Text124
AutoCAD SHX TextHALL
AutoCAD SHX Text129
AutoCAD SHX TextHALL
AutoCAD SHX Text102
AutoCAD SHX TextCHECK-IN
AutoCAD SHX Text133
AutoCAD SHX TextHALL
AutoCAD SHX Text111
AutoCAD SHX Text3
AutoCAD SHX TextB-A3.6
AutoCAD SHX TextA-A3.6
AutoCAD SHX TextB-A3.6
AutoCAD SHX TextA-A4.5
AutoCAD SHX TextB-A4.5
AutoCAD SHX TextA-A4.6
AutoCAD SHX TextB-A4.6
AutoCAD SHX TextB-A3.5
AutoCAD SHX TextB-A3.5
AutoCAD SHX TextA9.2
AutoCAD SHX TextB
AutoCAD SHX TextA9.2
AutoCAD SHX TextC
AutoCAD SHX TextA9.2
AutoCAD SHX TextA
AutoCAD SHX TextA9.2
AutoCAD SHX TextD
AutoCAD SHX TextB-A3.7
AutoCAD SHX TextB-A3.7
AutoCAD SHX TextA-A3.7
AutoCAD SHX TextA-A3.7
AutoCAD SHX Text100
AutoCAD SHX Text101
AutoCAD SHX Text102
AutoCAD SHX Text103
AutoCAD SHX Text107
AutoCAD SHX Text106
AutoCAD SHX Text132
AutoCAD SHX Text131
AutoCAD SHX Text129
AutoCAD SHX Text128
AutoCAD SHX Text119
AutoCAD SHX Text118
AutoCAD SHX Text114
AutoCAD SHX Text113
AutoCAD SHX Text112
AutoCAD SHX Text123
AutoCAD SHX Text117
AutoCAD SHX Text108
AutoCAD SHX Text109
AutoCAD SHX Text122
AutoCAD SHX Text124
AutoCAD SHX Text126
AutoCAD SHX Text127
AutoCAD SHX TextJ
AutoCAD SHX TextJ
AutoCAD SHX TextC
AutoCAD SHX TextB
AutoCAD SHX TextA
AutoCAD SHX TextA
AutoCAD SHX TextC
AutoCAD SHX TextB
AutoCAD SHX Text4X
AutoCAD SHX Text4
AutoCAD SHX Text4
AutoCAD SHX Text4X
AutoCAD SHX Text5X
AutoCAD SHX Text5X
AutoCAD SHX TextF1
AutoCAD SHX Text5
AutoCAD SHX Text4X
AutoCAD SHX Text3
AutoCAD SHX Text3
AutoCAD SHX Text2A
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text2XA
AutoCAD SHX Text3X
AutoCAD SHX Text3X
AutoCAD SHX Text3X
AutoCAD SHX Text3
AutoCAD SHX Text3
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX Text3
AutoCAD SHX Text3
AutoCAD SHX Text3
AutoCAD SHX Text4X
AutoCAD SHX TextF1
AutoCAD SHX Text3
AutoCAD SHX TextSIM
AutoCAD SHX TextC-A4.7
AutoCAD SHX TextA-A4.3
AutoCAD SHX TextSIM
AutoCAD SHX TextA-A4.3
AutoCAD SHX TextC-A4.3
AutoCAD SHX TextH
AutoCAD SHX TextA9.1
AutoCAD SHX TextF
AutoCAD SHX TextA9.1
AutoCAD SHX TextE
AutoCAD SHX TextA9.1
AutoCAD SHX TextC
AutoCAD SHX TextA9.1
AutoCAD SHX TextD
AutoCAD SHX TextA9.1
AutoCAD SHX TextB
AutoCAD SHX TextA9.1
AutoCAD SHX TextA
AutoCAD SHX TextA9.1
AutoCAD SHX TextC
AutoCAD SHX TextA9.1
AutoCAD SHX TextD
AutoCAD SHX TextB-A1.3
AutoCAD SHX TextC-A1.3
AutoCAD SHX TextD-A7.8
AutoCAD SHX TextF-A1.4
AutoCAD SHX TextG-A1.4
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX TextD
AutoCAD SHX TextD
AutoCAD SHX TextD-A2.1
AutoCAD SHX TextSIM
AutoCAD SHX TextD-A2.1
AutoCAD SHX TextD-A2.1
AutoCAD SHX TextF-A2.1
AutoCAD SHX TextSIM
AutoCAD SHX TextF-A2.1
AutoCAD SHX TextSIM
AutoCAD SHX TextB-A2.1
AutoCAD SHX TextSIM
AutoCAD SHX TextB-A2.1
AutoCAD SHX TextB-A2.1
AutoCAD SHX TextSIM
AutoCAD SHX TextB-A2.1
AutoCAD SHX TextE-A2.1
AutoCAD SHX TextE-A2.0
AutoCAD SHX TextSIM
AutoCAD SHX TextC-A2.1
AutoCAD SHX TextD-A2.1
AutoCAD SHX TextC-A2.1
AutoCAD SHX TextA-A4.8
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX TextC-A4.3
AutoCAD SHX Text130
AutoCAD SHX TextB-A4.4
AutoCAD SHX TextA-A3.6
AutoCAD SHX TextA-A3.5
AutoCAD SHX TextA-A4.1
AutoCAD SHX TextA-A3.5
AutoCAD SHX TextA-A4.2
AutoCAD SHX TextA-A4.4
AutoCAD SHX TextB-A4.3
AutoCAD SHX TextB-A4.3
AutoCAD SHX TextSIM
AutoCAD SHX Text2B
AutoCAD SHX Text2B
AutoCAD SHX TextF-A2.0
AutoCAD SHX TextSIM
AutoCAD SHX TextF-A2.0
AutoCAD SHX TextE-A7.8
AutoCAD SHX TextF1X
AutoCAD SHX TextF1X
AutoCAD SHX TextF1X
AutoCAD SHX Text4X
AutoCAD SHX Text1.REFERENCE SHEET A2.0 FOR GENERAL NOTES, REFERENCE SHEET A2.0 FOR GENERAL NOTES, PARTITION SCHEDULES & ASSEMBLIES
AutoCAD SHX TextF1X
AutoCAD SHX TextB-A2.2
AutoCAD SHX TextB-A2.2
AutoCAD SHX TextSIM
AutoCAD SHX TextD-A2.2
AutoCAD SHX TextC-A2.2
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX Text5502
AutoCAD SHX TextA
AutoCAD SHX TextL
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextF
AutoCAD SHX TextP
AutoCAD SHX TextR
AutoCAD SHX TextO
AutoCAD SHX TextE
AutoCAD SHX TextS
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextK
AutoCAD SHX TextO
AutoCAD SHX TextI
AutoCAD SHX TextA
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextI
AutoCAD SHX TextH
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextE
AutoCAD SHX TextA
AutoCAD SHX TextR
AutoCAD SHX Text.
AutoCAD SHX TextA
AutoCAD SHX TextS
AutoCAD SHX TextT
AutoCAD SHX TextR
AutoCAD SHX TextC
AutoCAD SHX TextH
AutoCAD SHX TextI
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX TextC
AutoCAD SHX TextE
AutoCAD SHX TextT
AutoCAD SHX TextE
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextZ
AutoCAD SHX TextR
AutoCAD SHX TextD
AutoCAD SHX Text4-22-2020
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
AutoCAD SHX TextE-A2.2
AutoCAD SHX TextE-A2.2
AutoCAD SHX TextSIM
AutoCAD SHX TextE-A2.2
AutoCAD SHX TextE-A2.2
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text5-1-2020
AutoCAD SHX TextDATE:
A2.2
SA
LIN
A E
DU
CA
TIO
NA
L A
UT
OM
OT
IV
E M
US
EU
M o
f A
ME
RIC
A
MU
SE
UM
A
DD
IT
IO
N &
R
EM
OD
EL
SA
LIN
A,
KA
NS
AS
Arch
ite
cts P
la
nn
ers D
esig
ne
rs
JO
NE
S G
IL
LA
M R
EN
Z
A
AREA C FLOOR PLAN
GENERAL NOTES
B
DETAIL
C
DETAIL
D
DETAIL
E
DETAIL
AutoCAD SHX TextESTCODE
AutoCAD SHX TextPHOTO MURAL WALL
AutoCAD SHX TextLEARNING PAVILION
AutoCAD SHX TextVEHICLE ENTRANCE
AutoCAD SHX TextAUTO MAINT
AutoCAD SHX TextAUTO LIFT
AutoCAD SHX TextAUTO RESTORATION LAB
AutoCAD SHX TextREAR PROJECTION SCREEN
AutoCAD SHX TextGALLERY SIGN
AutoCAD SHX TextGALLERY SIGN
AutoCAD SHX TextGALLERY SIGN
AutoCAD SHX TextGALLERY SIGN
AutoCAD SHX TextARTIFACT DISPLAY CASE
AutoCAD SHX TextPHOTO MURAL WALL
AutoCAD SHX TextPHOTO MURAL
AutoCAD SHX TextVEHICLE ENTRANCE
AutoCAD SHX TextPHOTO MURAL
AutoCAD SHX Text01
AutoCAD SHX Text02
AutoCAD SHX Text05
AutoCAD SHX Text06
AutoCAD SHX Text07
AutoCAD SHX Text13
AutoCAD SHX Text14
AutoCAD SHX Text15
AutoCAD SHX Text18
AutoCAD SHX Text17
AutoCAD SHX Text16
AutoCAD SHX Text12
AutoCAD SHX Text10
AutoCAD SHX Text03
AutoCAD SHX Text04
AutoCAD SHX Text08
AutoCAD SHX Text09
AutoCAD SHX Text21
AutoCAD SHX Text19
AutoCAD SHX Text20
AutoCAD SHX Text11
AutoCAD SHX Text22
AutoCAD SHX TextAUTO TURNTABLE
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextDISPLAY PLINTH
AutoCAD SHX TextGALLERY FOUR
AutoCAD SHX TextGALLERY THREE
AutoCAD SHX TextGALLERY TWO
AutoCAD SHX TextGALLERY ONE
AutoCAD SHX TextEXISTING BUILDING
AutoCAD SHX TextEXISTING BUILDING
AutoCAD SHX TextMATCHLINE
AutoCAD SHX TextMATCHLINE
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX TextRAMP UP 1:12 SLOPE
AutoCAD SHX TextUP
AutoCAD SHX TextUP
AutoCAD SHX TextRAMP UP 1:12 SLOPE
AutoCAD SHX TextEXISTING CURB & GUTTER TO REMAIN
AutoCAD SHX TextEXISTING RAILROAD TO REMAIN
AutoCAD SHX TextEXISTING CURB & GUTTER TO REMAIN
AutoCAD SHX Text(E) RECESSED RAMP TO BE FILLED IN
AutoCAD SHX TextNEW CONCRETE FLOOR
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextARTIFACT DISPLAY CASE
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextARTIFACT DISPLAY CASE
AutoCAD SHX TextVEHICLE ENTRANCE
AutoCAD SHX TextEXISTING CONCRETE
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX Text6" CONCRETE FILLED PIPE BOLLARDS REF. x-A1.1
AutoCAD SHX TextPATCH FLOOR @ REMOVED RAMP
AutoCAD SHX TextEXISTING TO REMAIN
AutoCAD SHX TextLANDSCAPE ROCK AREA
AutoCAD SHX Text(E) LIFT PIT TO BE FILLED IN
AutoCAD SHX Text(E) RECESSED RAMP TO BE FILLED IN
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING BOTH SIDES
AutoCAD SHX TextRAMP UP
AutoCAD SHX TextOUTLINE OF REMOVED DOCK
AutoCAD SHX TextOUTLINE OF REMOVED DOCK
AutoCAD SHX TextBUILT UP COLUMN, WAINSCOT & CROWN MOLDING
AutoCAD SHX TextWAINSCOT & CROWN MOLDING
AutoCAD SHX TextFLUME
AutoCAD SHX TextEXISTING TO REMAIN
AutoCAD SHX TextEXISTING TO REMAIN
AutoCAD SHX Text6" CONCRETE FILLED PIPE BOLLARDS REF. B-A1.1
AutoCAD SHX TextEXISTING CONCRETE
AutoCAD SHX TextALLEY
AutoCAD SHX TextALLEY
AutoCAD SHX TextLANDSCAPE ROCK AREA
AutoCAD SHX TextLANDSCAPE ROCK AREA
AutoCAD SHX TextL-A9.3
AutoCAD SHX TextL-A9.3
AutoCAD SHX TextSIM
AutoCAD SHX TextFEC
AutoCAD SHX TextFEC
AutoCAD SHX TextFEC
AutoCAD SHX TextCONCRETE SIDEWALK
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextNEW 8x8 DOWNSPOUT
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX TextLINE INDICATES PLYWOOD BLOCKING
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX TextEXIST. STEEL COLUMN
AutoCAD SHX TextEXIST. MASONRY WALL
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX Text6" MTL STUD
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text5/8" TYPE X G.B. OVER 1 5/8" MTL STUDS @ 16"O.C.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX TextEXIST. MASONRY WALL
AutoCAD SHX Text5/8" TYPE X G.B. OVER 6" MTL STUDS @ 16"O.C.
AutoCAD SHX Text6" BATT INSUL.
AutoCAD SHX Text1/2" PLYWOOD BLOCKING
AutoCAD SHX Text1 5/8" MTL STUDS
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text18-2946
AutoCAD SHX TextJOB:
AutoCAD SHX TextC
AutoCAD SHX TextCOPYRIGHTED
AutoCAD SHX TextDATE:
AutoCAD SHX TextSHEET:
AutoCAD SHX Text730 N. Ninth
AutoCAD SHX Text785.827.0386 jgr@jgrarchitects.com
AutoCAD SHX TextSalina, KS 67402
AutoCAD SHX Text1800 Wyandotte St.,
AutoCAD SHX TextKansas City, MO 64108
AutoCAD SHX TextP.O. BOX 2928
AutoCAD SHX TextSuite 102
AutoCAD SHX TextNorth
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX TextGALLERIES
AutoCAD SHX Text137
AutoCAD SHX TextOBSERVATION LAB
AutoCAD SHX Text138
AutoCAD SHX TextSTORAGE
AutoCAD SHX Text141
AutoCAD SHX TextOFFICE
AutoCAD SHX Text139
AutoCAD SHX TextMAINT.
AutoCAD SHX TextGALLERY
AutoCAD SHX Text136
AutoCAD SHX TextINTRODUCTION
AutoCAD SHX Text139
AutoCAD SHX Text138
AutoCAD SHX Text136
AutoCAD SHX Text137
AutoCAD SHX Text141
AutoCAD SHX Text142
AutoCAD SHX Text143
AutoCAD SHX TextK
AutoCAD SHX TextL
AutoCAD SHX TextM
AutoCAD SHX TextM
AutoCAD SHX Text144
AutoCAD SHX Text4
AutoCAD SHX Text5
AutoCAD SHX Text3
AutoCAD SHX Text4
AutoCAD SHX TextF1
AutoCAD SHX Text3
AutoCAD SHX TextB-A3.6
AutoCAD SHX TextB-A3.6
AutoCAD SHX TextB-A3.5
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX TextA3.4
AutoCAD SHX TextD
AutoCAD SHX TextA3.4
AutoCAD SHX TextC
AutoCAD SHX TextA3.4
AutoCAD SHX TextA
AutoCAD SHX TextA3.4
AutoCAD SHX TextB
AutoCAD SHX TextEXISTING
AutoCAD SHX TextA9.3
AutoCAD SHX TextD
AutoCAD SHX TextA9.3
AutoCAD SHX TextC
AutoCAD SHX TextA9.3
AutoCAD SHX TextA
AutoCAD SHX TextA9.3
AutoCAD SHX TextB
AutoCAD SHX TextNEW
AutoCAD SHX TextA9.2
AutoCAD SHX TextG
AutoCAD SHX TextH-A9.3
AutoCAD SHX TextF-A9.3
AutoCAD SHX TextF-A9.3
AutoCAD SHX TextA8.2
AutoCAD SHX TextK
AutoCAD SHX TextA8.2
AutoCAD SHX TextH
AutoCAD SHX TextA8.2
AutoCAD SHX TextM
AutoCAD SHX TextA8.2
AutoCAD SHX TextJ
AutoCAD SHX TextA8.2
AutoCAD SHX TextM
AutoCAD SHX TextA8.2
AutoCAD SHX TextL
AutoCAD SHX TextA-A4.7
AutoCAD SHX TextB-A4.7
AutoCAD SHX TextC-A4.7
AutoCAD SHX TextD-A4.7
AutoCAD SHX TextB-A3.7
AutoCAD SHX TextB-A3.7
AutoCAD SHX TextA-A4.8
AutoCAD SHX TextG-A9.3
AutoCAD SHX TextH-A9.3
AutoCAD SHX TextG-A9.3
AutoCAD SHX TextSIM
AutoCAD SHX TextJ-A9.3
AutoCAD SHX TextA-A3.5
AutoCAD SHX TextA-A4.1
AutoCAD SHX TextE
AutoCAD SHX TextE
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX TextF1
AutoCAD SHX Text1.REFERENCE SHEET A2.0 FOR GENERAL NOTES, REFERENCE SHEET A2.0 FOR GENERAL NOTES, PARTITION SCHEDULES & ASSEMBLIES
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX Text5502
AutoCAD SHX TextA
AutoCAD SHX TextL
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextF
AutoCAD SHX TextP
AutoCAD SHX TextR
AutoCAD SHX TextO
AutoCAD SHX TextE
AutoCAD SHX TextS
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextK
AutoCAD SHX TextO
AutoCAD SHX TextI
AutoCAD SHX TextA
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextI
AutoCAD SHX TextH
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextE
AutoCAD SHX TextA
AutoCAD SHX TextR
AutoCAD SHX Text.
AutoCAD SHX TextA
AutoCAD SHX TextS
AutoCAD SHX TextT
AutoCAD SHX TextR
AutoCAD SHX TextC
AutoCAD SHX TextH
AutoCAD SHX TextI
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX TextC
AutoCAD SHX TextE
AutoCAD SHX TextT
AutoCAD SHX TextE
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextZ
AutoCAD SHX TextR
AutoCAD SHX TextD
AutoCAD SHX Text4-22-2020
AutoCAD SHX TextE-A4.7
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text5-1-2020
AutoCAD SHX TextREVISED:
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX TextE-A2.2
AutoCAD SHX TextE-A2.2
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
AutoCAD SHX TextF1
AutoCAD SHX TextSIM
A9.1
SA
LIN
A E
DU
CA
TIO
NA
L A
UT
OM
OT
IV
E M
US
EU
M o
f A
ME
RIC
A
MU
SE
UM
A
DD
IT
IO
N &
R
EM
OD
EL
SA
LIN
A,
KA
NS
AS
Arch
ite
cts P
la
nn
ers D
esig
ne
rs
JO
NE
S G
IL
LA
M R
EN
Z
A
INTERIOR ELEVATION
KUSTOM KEMPS GALLERY #107
AREA C
B
INTERIOR ELEVATION
KUSTOM KEMPS GALLERY #107
AREA C
C
INTERIOR ELEVATION
KUSTOM KEMPS GALLERIES #106/107
AREA C
D
INTERIOR ELEVATION
KUSTOM KEMPS GALLERIES #106/107
AREA C
E
INTERIOR ELEVATION
KUSTOM KEMPS GALLERY #106
AREA C
F
INTERIOR ELEVATION
KUSTOM KEMPS GALLERY #106
AREA C
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING STEEL TRUSS
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING
AutoCAD SHX TextG.B. WALLS PAINT COLOR 1
AutoCAD SHX TextG.B. WALLS PAINT COLOR 1
AutoCAD SHX TextG.B. WALLS PAINT COLOR 1
AutoCAD SHX TextG.B. WALLS PAINT COLOR 1
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING SLIDING DOORS & MURAL
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX TextNEW GUARDRAIL REF. D/E-A7.8
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextNEW OFFICES
AutoCAD SHX TextNEW STEEL ANGLE LINTEL
AutoCAD SHX TextNEW OPENING
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextNEW OFFICES
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextNEW OPENING
AutoCAD SHX TextNEW STEEL ANGLE LINTEL
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextNEW STEEL ANGLE LINTEL
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX Text100'-9"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextNEW OPENING
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text18-2946
AutoCAD SHX TextJOB:
AutoCAD SHX TextC
AutoCAD SHX TextCOPYRIGHTED
AutoCAD SHX TextDATE:
AutoCAD SHX TextSHEET:
AutoCAD SHX Text730 N. Ninth
AutoCAD SHX Text785.827.0386 jgr@jgrarchitects.com
AutoCAD SHX TextSalina, KS 67402
AutoCAD SHX Text1800 Wyandotte St.,
AutoCAD SHX TextKansas City, MO 64108
AutoCAD SHX TextP.O. BOX 2928
AutoCAD SHX TextSuite 102
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX Text5502
AutoCAD SHX TextA
AutoCAD SHX TextL
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextF
AutoCAD SHX TextP
AutoCAD SHX TextR
AutoCAD SHX TextO
AutoCAD SHX TextE
AutoCAD SHX TextS
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextK
AutoCAD SHX TextO
AutoCAD SHX TextI
AutoCAD SHX TextA
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextI
AutoCAD SHX TextH
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextE
AutoCAD SHX TextA
AutoCAD SHX TextR
AutoCAD SHX Text.
AutoCAD SHX TextA
AutoCAD SHX TextS
AutoCAD SHX TextT
AutoCAD SHX TextR
AutoCAD SHX TextC
AutoCAD SHX TextH
AutoCAD SHX TextI
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX TextC
AutoCAD SHX TextE
AutoCAD SHX TextT
AutoCAD SHX TextE
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextZ
AutoCAD SHX TextR
AutoCAD SHX TextD
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text5-1-2020
AutoCAD SHX TextREVISED:
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
A9.3
SA
LIN
A E
DU
CA
TIO
NA
L A
UT
OM
OT
IV
E M
US
EU
M o
f A
ME
RIC
A
MU
SE
UM
A
DD
IT
IO
N &
R
EM
OD
EL
SA
LIN
A,
KA
NS
AS
Arch
ite
cts P
la
nn
ers D
esig
ne
rs
JO
NE
S G
IL
LA
M R
EN
Z
A
INTERIOR ELEVATIONS
AREA C
B
INTERIOR ELEVATIONS
AREA C
D
INTERIOR ELEVATIONS
AREA C
C
INTERIOR ELEVATIONS
AREA C
E
INTERIOR ELEVATIONS
AREA C
F
SECTION @ RAILING
AREA C
G
STAIR SECTION
AREA C
H
STAIR SECTION
AREA C
J
STAIR SECTION
AREA C
K
BULKHEAD SECTION
AREA C
L
STAIR PLAN
AREA C
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX Text98''-6"
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextPAINT COLOR 1
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextFURR EXISTING BRICK WALL
AutoCAD SHX Text100'-0"
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING. PAINTED
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextFILL IN OPENING (BEYOND) W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX TextBEADBOARD WALL PANEL, STAINED
AutoCAD SHX TextP.LAM WAINSCOT
AutoCAD SHX TextG.B. WALLS PAINTED BLACK
AutoCAD SHX TextB-A9.4
AutoCAD SHX TextG.B. BULKHEAD PAINTED BLACK
AutoCAD SHX TextG.B. BULKHEAD PAINTED COLOR 1
AutoCAD SHX TextFILL IN OPENING (BEYOND) W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextNEW G.B. WALL, PAINT COLOR 1
AutoCAD SHX TextNEW G.B. WALL, PAINT COLOR 1
AutoCAD SHX Text100'-0"
AutoCAD SHX Text98''-6"
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextPAINT COLOR 1
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextFURR EXISTING BRICK WALL
AutoCAD SHX TextFILL OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextEXISTING STEEL TRUSS. PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextFILL BELOW 100'-0" ELEV. W/ FACE BRICK
AutoCAD SHX TextNEW HI-LIFT OVERHEAD DOOR
AutoCAD SHX TextNEW ALUM WINDOW UNIT. SIMULATE OVERHEAD DOOR
AutoCAD SHX TextNEW ALUM WINDOW UNIT. SIMULATE OVERHEAD DOOR
AutoCAD SHX TextNEW ALUM WINDOW UNIT. SIMULATE OVERHEAD DOOR
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextFILL IN OPENING W/ FACE BRICK TO MATCH EXISTING
AutoCAD SHX TextG.B. BULKHEAD PAINTED BLACK
AutoCAD SHX TextG.B. BULKHEAD, PAINTED COLOR 1 REF. K-A9.3
AutoCAD SHX TextNEW G.B. WALL, PAINT COLOR 1
AutoCAD SHX Text100'-0"
AutoCAD SHX Text98'-6"
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextPAINT COLOR 1
AutoCAD SHX TextTHIN BRICK
AutoCAD SHX TextSOLDIER COURSE THIN BRICK
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING BRICK CHASE
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextEXISTING STEEL COLUMN BEYOND
AutoCAD SHX TextG.B. BULKHEAD PAINTED BLACK
AutoCAD SHX TextNEW H.M. DOOR & FRAME
AutoCAD SHX TextNEW ROLL-UP OVERHEAD DOOR
AutoCAD SHX TextG.B. BULKHEAD, PAINTED COLOR 1 REF. K-A9.3
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextNEW OPENING
AutoCAD SHX TextNEW STEEL ANGLE LINTEL
AutoCAD SHX TextPAINT BLACK
AutoCAD SHX TextEXISTING BRICK
AutoCAD SHX TextEXISTING STEEL TRUSS, PAINTED
AutoCAD SHX TextFILL IN RAMP W/ COMP. FILL & CONCRETE SLAB
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING. PAINTED
AutoCAD SHX TextBEADBOARD WALL PANEL, STAINED
AutoCAD SHX TextG.B. WALLS (FULL HEIGHT) PAINT COLOR 1
AutoCAD SHX TextG.B. WALLS PAINTED BLACK
AutoCAD SHX TextA-A9.4
AutoCAD SHX TextNEW G.B. WALL, PAINT COLOR 1
AutoCAD SHX Text98'-6"
AutoCAD SHX Text100'-0"
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextEXISTING WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX TextEXISTING CRICKET WOOD JOISTS & WOOD DECKING, PAINTED
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextFINISHED CONCRETE
AutoCAD SHX Text1/4
AutoCAD SHX Text12
AutoCAD SHX TextG.B. BULKHEAD, PAINTED COLOR 1 REF. K-A9.3
AutoCAD SHX TextPREFIN. MTL WALL PANEL (TYPE 1)
AutoCAD SHX TextNEW CAR PLATFORM
AutoCAD SHX TextNEW STEEL HANDRAIL REF. F-A9.3
AutoCAD SHX TextPREFIN. MTL WALL PANEL (TYPE 1)
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX Text98'-6"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXIST. CONC. SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextEXISTING FOUNDATION
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text#4 @ NOSING
AutoCAD SHX Text#4x12" @ 12"O.C.
AutoCAD SHX Text4
AutoCAD SHX Text#4x12" @ 12"O.C.
AutoCAD SHX Text#4x20" @ 12"O.C.
AutoCAD SHX Text8
AutoCAD SHX TextCOMP. FILL
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX Text98'-6"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextEXISTING FOUNDATION
AutoCAD SHX TextEXISTING STEEL COLUMN
AutoCAD SHX TextP.LAM " PLYWOOD 34" PLYWOOD TRIM OVER WOOD BLK'G
AutoCAD SHX TextPREFIN. MTL WALL PANEL (TYPE 1) OVER 3 " MTL 58" MTL STUDS @ 24"O.C.
AutoCAD SHX TextCONT. CAULK
AutoCAD SHX TextPREFIN. MTL FLASHING SET IN CAULK
AutoCAD SHX TextCORE DRILL (E) SLAB FOR NEW RAILING
AutoCAD SHX TextNEW 1 "sq. RAIL, 14"sq. RAIL, PAINTED COLOR 1
AutoCAD SHX TextNEW 2"sq. TOP RAIL & POST, PAINTED, COLOR 1
AutoCAD SHX Text38"x4" PLATE SANDED/ EASED EDGES PAINTED, COLOR 2
AutoCAD SHX Text98'-6"
AutoCAD SHX TextFIN FLR
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextEXISTING FOUNDATION
AutoCAD SHX Text(3) RISERS
AutoCAD SHX Text(3) RISERS
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text3'-0"
AutoCAD SHX Text#4x12" @ 12"O.C.
AutoCAD SHX Text#4x20" @ 12"O.C.
AutoCAD SHX Text#4 @ NOSING
AutoCAD SHX Text#4x12" @ 12"O.C.
AutoCAD SHX Text8
AutoCAD SHX Text4
AutoCAD SHX TextCOMP. FILL
AutoCAD SHX Text2 TREADS
AutoCAD SHX Text2 TREADS
AutoCAD SHX TextNEW 1 1/4"sq. HANDRAIL, PAINTED, COLOR 1
AutoCAD SHX TextRAILING SYSTEM REF. F-A9.3
AutoCAD SHX Text100'-0"
AutoCAD SHX TextFIN FLR
AutoCAD SHX Text98'-6"
AutoCAD SHX TextFIN FLR
AutoCAD SHX TextNEW 1 "sq. RAIL, 14"sq. RAIL, PAINTED COLOR 1
AutoCAD SHX TextEXISTING CONCRETE SLAB. PREP FOR NEW POLISH FINISH
AutoCAD SHX TextPREFIN. MTL WALL PANEL (TYPE 1) OVER 3 " MTL 58" MTL STUDS @ 24"O.C.
AutoCAD SHX TextCORE DRILL & SLEEVE
AutoCAD SHX TextCOMP. FILL
AutoCAD SHX TextNEW 2"sq. TOP RAIL & POST, PAINTED, COLOR 1
AutoCAD SHX Text38"x4" PLATE SANDED/ EASED EDGES PAINTED, COLOR 2
AutoCAD SHX Text4" CONC. SLAB REF STRUCT. FOR REINF. PREP FOR NEW FLOOR FINISH
AutoCAD SHX TextPAINTED
AutoCAD SHX TextPAINTED
AutoCAD SHX Text114'-0"
AutoCAD SHX TextEX. TRUSS
AutoCAD SHX Text112'-0"
AutoCAD SHX TextBULKHEAD
AutoCAD SHX TextPAINTED
AutoCAD SHX TextPAINTED
AutoCAD SHX Text58" TYPE X G.B. BOTH SIDES OVER 6" MTL STUDS @ 16"O.C.(RADIUS)
AutoCAD SHX Text3 " MTL STUD 58" MTL STUD BRACES @ EVERY OTHER STUD
AutoCAD SHX Text3 " MTL STUD 58" MTL STUD BRACES @ EVERY OTHER STUD
AutoCAD SHX TextNEW TPO ROOFING MEMBRANE OVER " COVER BOARD & 6" 12" COVER BOARD & 6" POLYISO RIGID INSULATION (in 1 " LAYERS)12" LAYERS)
AutoCAD SHX TextEXISTING MTL BARREL ROOF TRUSS
AutoCAD SHX TextEXISTING 2x WOOD ROOF JOISTS & 1x WOOD DECKING
AutoCAD SHX TextSUSP. ACOUS. CEILING
AutoCAD SHX Text2 TREADS
AutoCAD SHX Text2 TREADS
AutoCAD SHX TextWALL MOUNTED HANDRAIL
AutoCAD SHX TextWALL MOUNTED HANDRAIL
AutoCAD SHX Text1'-0"
AutoCAD SHX Text1'-0"
AutoCAD SHX Text1'-0"
AutoCAD SHX Text1'-0"
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text18-2946
AutoCAD SHX TextJOB:
AutoCAD SHX TextC
AutoCAD SHX TextCOPYRIGHTED
AutoCAD SHX TextDATE:
AutoCAD SHX TextSHEET:
AutoCAD SHX Text730 N. Ninth
AutoCAD SHX Text785.827.0386 jgr@jgrarchitects.com
AutoCAD SHX TextSalina, KS 67402
AutoCAD SHX Text1800 Wyandotte St.,
AutoCAD SHX TextKansas City, MO 64108
AutoCAD SHX TextP.O. BOX 2928
AutoCAD SHX TextSuite 102
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1/8"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX Text3/4"=1'-0"
AutoCAD SHX TextH-A9.3
AutoCAD SHX TextF-A9.3
AutoCAD SHX Text3/4"=1'-0"
AutoCAD SHX Text1 1/2"=1'-0"
AutoCAD SHX TextG-A9.3
AutoCAD SHX Text3/4"=1'-0"
AutoCAD SHX Text3/4"=1'-0"
AutoCAD SHX TextH-A9.3
AutoCAD SHX TextG-A9.3
AutoCAD SHX Text1 "sq. STEEL HANDRAIL W/ 14"sq. STEEL HANDRAIL W/ MTL MOUNTING BRACKET (MIN. OF 3 PER HANDRAIL. COMPLY W/ STRUCT. REQ'S OF APPLICABLE CODE), PAINTED COLOR 1
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX Text5502
AutoCAD SHX TextA
AutoCAD SHX TextL
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextF
AutoCAD SHX TextP
AutoCAD SHX TextR
AutoCAD SHX TextO
AutoCAD SHX TextE
AutoCAD SHX TextS
AutoCAD SHX TextN
AutoCAD SHX TextS
AutoCAD SHX TextK
AutoCAD SHX TextO
AutoCAD SHX TextI
AutoCAD SHX TextA
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextI
AutoCAD SHX TextH
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextC
AutoCAD SHX TextL
AutoCAD SHX TextE
AutoCAD SHX TextA
AutoCAD SHX TextR
AutoCAD SHX Text.
AutoCAD SHX TextA
AutoCAD SHX TextS
AutoCAD SHX TextT
AutoCAD SHX TextR
AutoCAD SHX TextC
AutoCAD SHX TextH
AutoCAD SHX TextI
AutoCAD SHX TextS
AutoCAD SHX TextA
AutoCAD SHX TextC
AutoCAD SHX TextE
AutoCAD SHX TextT
AutoCAD SHX TextE
AutoCAD SHX TextE
AutoCAD SHX TextN
AutoCAD SHX TextZ
AutoCAD SHX TextR
AutoCAD SHX TextD
AutoCAD SHX Text4-22-2020
AutoCAD SHX Text5-1-2020
AutoCAD SHX TextREVISED:
AutoCAD SHX Text1
AutoCAD SHX Text1
AutoCAD SHX Text1
Sheets and ViewsA2.1 Area A & B1Z1EX1
Sheets and ViewsA2.2 Area C1Z1EX1
Sheets and ViewsA9.11Z1EX1
Sheets and ViewsA9.31Z1EX1