Post on 05-Feb-2021
transcript
HIGH BANDWIDTHHIGH BANDWIDTH
HIGH BANDWIDTHHIGH BANDWIDTH
Solving Interconnect Problems Quickly Since 1966
Design Through Manufacture of High-Performance-Interconnect Systems,Connectors & Cable Assemblies
Innovative-Interconnect Solutions
NX | Mini-SAS | QSFP+ | SFP+
Innovative-Interconnect Solutions
Command+Shift Click to Override Master Object> Edit QR Code… paste PDF URL from WordPress Media Panel. Override Product Name and PDF Document Type for each QR. Use Adobe PDF Preset “QR wName Layer” to export just that page number. High Bandwidth Brochure.pdf
Members
High Bandwidth
http://meritec.com/wp-content/uploads/2015/02/MERITEC-New-HBW-NX-Mini-SAS-QSFP-SFP-4-12XDataRates-1409.pdf
S2
S1
S16
S15P1
S2
S1
S16
S15P2
[14.2].56
[8.7].34
[24.7].97
[7.0].28
[46.6]1.84
[8.7].34
[9.7].38[14.3]
.56
[29.7]1.17
[6.7].26
[42.8]1.69
Latch Actuator
Length
M2.5 Thumbscrew
4X & 12XDirect
Attach
Direct Attach
Wafer-Based Design
Meritec’s 4X (SFF-8470) Direct AttachUL Listed Materials & RoHS Compliant
See page 7 for more configurations
Features & Benefits
• Available in 24, 26, 28 & 30 AWG• Optional connectors available• Supports data rates in excess of 6.0 Gb/s• Meets or exceeds SAS, InfiniBand,
Ethernet CX4 & SATA specs• Matched impedance design of
100 Ohm ± 10%
• Mated cycles: 250 Minimum• Fully electrically tested• Available lengths built to order• LSZH jacketed cable• Durable SFF-8470 design
Wiring DiagramPlug 1 Plug 2
S1 S16S2 S15S3 S14S4 S13S5 S12S6 S11S7 S10S8 S9S9 S8S10 S7S11 S6S12 S5S13 S4S14 S3S15 S2S16 S1
2 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com
888-MERITEC (637-4832)
S2
S1
S48
S47P1
S2
S1
S48
S47P2
[14.7].58
[8.7].34
[49.0]1.93
[6.9].27
[48.2]1.90
[8.7].34
[9.7].38
[14.3].56
[53.6]2.11
[6.9].27
[48.5]1.91
Latch Actuator
Length
M2.5 Thumbscrew
See page 7 for more configurations
Contact Meritec for more information about custom orders or to ask about your technical needs.
Specifications
• Contact Material: Copper Alloy• Standard Contact Finish: 30
micro" Au / 50 micro" Ni• Die-Cast Shell with Ni Plating• Durability: 250 cycles
Meritec’s 12X (SFF-8470) Direct AttachUL Listed Materials & RoHS Compliant
Environmental Specs
• UL Listed materials• Temperature rating:
–20 °C to +75 °C• RoHS Compliant
Wiring DiagramPlug 1 Plug 2
S1 S48S2 S47S3 S46S4 S45S5 S44S6 S43S7 S42S8 S41S9 S40S10 S39S11 S38S12 S37
Wiring DiagramPlug 1 Plug 2
S13 S36S14 S35S15 S34S16 S33S17 S32S18 S31S19 S30S20 S29S21 S28S22 S27S23 S26S24 S25
Wiring DiagramPlug 1 Plug 2
S25 S24S26 S23S27 S22S28 S21S29 S20S30 S19S31 S18S32 S17S33 S16S34 S15S35 S14S36 S13
Wiring DiagramPlug 1 Plug 2
S37 S12S38 S11S39 S10S40 S9S41 S8S42 S7S43 S6S44 S5S45 S4S46 S3S47 S2S48 S1
888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 3
www.meritec.com
4 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com
888-MERITEC (637-4832)
IB refers to InfiniBand™ Trade Association Specification / CX4 refers to the 10GBase Ethernet-CS4 Specification.
* The InfiniBand DDR lengths for each gauge are based on Meritec’s testing with a Qlogic/Silverstorm 24-Port Switch P/N 9024-CU24-ST2-DDR using the outermost (worst-case) mezzanine ports (top row, extreme left and right-hand)
MERITEC • 1359 WEST JACKSON STREET • PAINESVILLE, OHIO 44077 USAPHONE: (440) 354-2100 | FAX: (440) 354-5692© Meritec 101203
Length, Meters – > 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 19 20 21 18 19 20 2130 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
28 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
26 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
24 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
Meritec High Performance 4X (SFF-8470) Cable AssembliesData Rate – Wire Gauge vs. Performance Over Length
Length, Meters – > 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 19 20 21 18 19 20 2130 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
28 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
26 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
24 AWGIB SDR 2.5 Gb/sIB DDR* 5.0 Gb/sIB QDR 10.0 Gb/s
CX4 3.125 Gb/s
Meritec High Performance 4X (SFF-8470) Cable AssembliesData Rate – Wire Gauge vs. Performance Over Length
4X | 12XAssembly
Description
Retention Mechanism1 = Latch Retention2 = Thumbscrew Retention
Retention Mechanism1 = Latch Retention2 = Thumbscrew Retention
Connector 1 (left)6 = 4X7 = 12X (Not Available in Z Axis or angled configuration)
Cable Egress1 = Straight2 = Angled3 = Z Axis4 = Belly to Belly
Cable Egress1 = Straight2 = Angled3 = Z Axis4 = Belly to Belly
Wire Style and AWG1 = 24 AWG (LSZH)2 = 26 AWG (LSZH)3 = 28 AWG (LSZH)4 = 30 AWG (LSZH)5 = 24 AWG (PVC)6 = 26 AWG (PVC)7 = 28 AWG (PVC)
Connector 1 (left) Orientation(See “Mech.Orient” sheet)Select one: A,C,E,G,I,K,M,O,S,W,Y
Connector 2 (right) Orientation(See “Mech.Orient” sheet)Select one: B,D,F,H,J,L,N,P,T,X,Z
Length00.5 = .5 meters 01.0 = 1 meter 10.0 = 10 meters
Note: Assembly Description shown above to be used for RFQs and ordering purposes. For application specific assemblies not shown in the table, please contact factory. This is not a part number.
Connector 2 (right)6 = 4X7 = 12X (Not available in Z Axis or angled configuration)
Please show below any specific labeling requirements. Default labeling includes: Meritec, P/N, and Date Code.
7 3 A 2 4 7 5 D 1 10.0
888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 5
www.meritec.com
Z A
xis
Cab
le E
gres
s
Mechanical Orientation LettersLeft End Right End
Any available “Left End” can be paired with any available “Right End”
Inner edge of the backshell at the latch. See line drawing for details.
Note: Not Available with Printed Direct Attach (PDA) option
A B
C D
E F
G H
I J
K L
Z-A
xis
Cab
le E
gres
s
Z-A
xis
Cab
le E
gres
s
Z-A
xis
Cab
le E
gres
s
Z-A
xis
Cab
le E
gres
s
S T
Y Z
W X
M
P
Cable Assembly Nominal Length
Note: The broken line view is from the rear of the backshell and the solid line view is from the mating face of the connector.
Tolerance: 10 Meter, +/– 100mm
S1 Short Side Dn 4X/12X Straight Cable Egress Straight Cable Egress 4X/12X Short Side Up S1
Short Side Up S1 4X/12X Straight Cable Egress Straight Cable Egress 4X/12X S1 Short Side Dn
S1 Short Side Dn 4X
4X
4X
4X
Short Side Up S1
S1Short Side Up Short Side Dn S1
Angled Cable Egress
Angled Cable Egress
Angled Cable Egress
Angled Cable Egress
4X
4X
Short Side Up S1
Short Side Dn S1
Angled Cable Egress
Angled Cable Egress
4X
4X
Angled Cable Egress S1 Short Side Dn
Angled Cable Egress S1 Short Side Up
Short Side UpShort Side Dn
Short Side UpShort Side Dn
4X 4X
4X 4X
N
O
Cable Egress Cable Egress
No Termination No Termination
Outer Jacket Strip Outer Jacket Strip
Custom/Other Conn.Custom/Other Conn.
4X | 12XMechanical
Orientation
6 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com
888-MERITEC (637-4832)
HBWHyBrids
+ Options
12X Daisy Chains
Belly-to-Belly Configuration
(2) 4X Angled 4X – (3) eSATA
4X Z-Axis Configuration
12X – (3) 4X Connections
QSFP+
SFP+
888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 7
www.meritec.com
Meritec’s Feed-Thru Connectors are RoHS Compliant
P2P1
1.550
1.330
.281 .417
.600
1.000
(.030) (.035)
.775
2X 4-40 UNC .17
.575
4X 4-40 UNC .22
Receptacles
Board Receptacle & Feed-Through Mounts Available
Thumbscrew-to-Thumbscrew P/N 984001-004-T
RoHS Compliant
Also Available:Latch-to-Latch P/N 984001-004-L
Latch-to-Thumbscrew P/N 984001-004-LTS
Thumbscrew-to-Latch P/N 984001-004-TSL
4-Lane Feed-Thru Connector
Feed-Thru PinoutP1 P2S1 S16S2 S15S3 S14S4 S13S5 S12S6 S11S7 S10S8 S9S9 S8S10 S7S11 S6S12 S5S13 S4S14 S3S15 S2S16 S1
Panel-Mount Receptacle-Cable
Termination
New!New!
Consult factory.
8 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com
888-MERITEC (637-4832)
NX+ Board-Mount Receptacle SFF-84734X & 12X Available
12.7 RemovablePick-and-Place Tab
13.0
8.50.5
Shown with optional panel mountShown without optional panel mount
29.8
34.3
2X 2-56 UNC Thru
Shown with optional side panel mount
S1
S1
6.6
S1
6.4
M2X0.4 Thru
4.
9
12
.7
EMIGasket
(Optional)
24.9
6.0
11.3
13
.0
14
.9
2.5 10
.2
15
.4
Visit www.meritec.com to download the complete SFF-8473 Datasheet. E-mail: info@meritec.com
Board Mount
Features & Benefits• Improved crosstalk and insertion loss• Performance enhanced to 20 Gb/s
per differential pair or lane, in combination with Meritec enhanced NX-capable assemblies
• Die-cast housing for rugged application• Screw & solder post hold-down features• Top and/or side-panel mount(s) available
• Latch & thumbscrew options available• Removable tab for pick-&-place
applications• SMT configuration• Supports Ethernet CX4, Myrinet, RapidIO,
Aurora and other high-speed applications
Specifications / Visit www.meritec.com/catalog
888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 9
www.meritec.com
SFP+ & QSFP+SFF-8436, SFF-8470
SFF-8431, SFF8432
PAD 11
PAD 10
PAD 20Latch Pull
A
Detail A
Oprionl: Overmolded Plastic Nose Piece (Under Development)
PAD 018.55±0.15
13.55±0.25
57.50 Ref.
Length
Wiring DiagramP1 End P2 End
Pad Signal Pad Signal
01 GND 20 GND02 TX2n 21 RX2n03 TX2p 22 RX2p04 GND 23 GND05 TX4n 24 RX4n06 TX4p 25 RX4p07 GND 26 GND13 GND 32 GND14 RX3p 33 TX3p15 RX3n 34 TX3n16 GND 35 GND17 RX1p 36 TX1p18 RX1n 37 TX1n19 GND 38 GND20 GND 01 GND21 RX2n 02 TX2n22 RX2p 03 TX2p23 GND 04 GND24 RX4n 05 TX4n25 RX4p 06 TX4p26 GND 07 GND32 GND 13 GND33 TX3p 14 RX3p34 TX3n 15 RX3n35 GND 16 GND36 TX1p 17 RX1p37 TX1n 18 RX1n38 GND 19 GND
SFP+
Chart Suffix Wire Gauge (AWG)Length in Meters
at 10 Gb/sTolerance at
Maximum LengthA= 24 7 ± 70.0 mmB= 26 5 ± 70.0 mmC= 28 3 ± 70.0 mmD= 30 1 ± 70.0 mm
SFP+Passive Copper-Cable Assemblies are RoHS Compliant
Note: Tolerance of ± 40.0 mm for lengths of 0.5M to 1.0M consult factory for lengths less than 0.5M.
Part Number Ordering Specification:
9846 - Chart Suffix
(AWG)
– Length In Meters
•
10 High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ www.meritec.com
888-MERITEC (637-4832)
P1 P2PAD 20
PAD 19
PAD 38
PAD 01
18.35±0.1
8.5±0.1
86.05
Length
QSFP+
Features & Benefits• Enhanced EMI shielding for low emissions• Ultra low crosstalk for enhanced
performance• Mates with all standard SFP+/QSFP interfaces• Lower cost alternative to fiber optics• RoHS Compliant & EEPROM Programmable
Cable Specifications• Supports/Exceeds 40 Gb/s Ethernet
IEEE802.3ba• SFF-8431/SFF-8436 Compliant• Fully shielded assembly with drain wire• Die cast metal housings• Ergonomic pull style latch to de-latch with
positive locking mechanism
Environmental Specs• Material – UL flame rating: 94V – 0• Temperature rating: –10 °C to +70 °C
QSFP+Passive Copper-Cable Assemblies are RoHS Compliant
Part Number Ordering Specification:
9841 - Chart Suffix
(AWG)
N N – Length In Meters
•
888-MERITEC (637-4832) High Bandwidth NX | Mini -SAS | OSFP+ | SFP+ 11
www.meritec.com
HIGH BANDWIDTHHIGH BANDWIDTH
HIGH BANDWIDTHHIGH BANDWIDTH
Solving Interconnect Problems Quickly Since 1966
Design Through Manufacture of High-Performance-Interconnect Systems,Connectors & Cable Assemblies
Innovative-Interconnect Solutions
NX | Mini-SAS | QSFP+ | SFP+
Innovative-Interconnect Solutions
Visit us online!
1359 West Jackson Street • Painesville, Ohio 44077 USA 440-354-2100 • Fax: 440-354-5692 • 800-860-9014 • 888-MERITEC (637-4832) www.meritec.com • E-mail: info@meritec.com
© Meritec 061920 • All rights reserved. • Document Number 0145883 Connectors Unlimited (CUI) and Mold-Tech (MT) Divisions are now merged and DBA Meritec.
1020 Marauder Street Chico, California 95973 USA 530-891-3551, Fax: 530-891-3599 888-891-3551 (Toll Free) www.joysignal.com E-mail: customerservice@joysignal.com
www.connectorsunlimited.com ISO Certification 9001:2015
NAICS# 334417 • 334418 334419 • 335929 • 335999Cage CodesMeritec 0RAG4 Connectors Unlimited 49MH9 Joy Signal Technology 1SJC3 Mold-Tech 1BCG6
http://www.meritec.com
High Bandwidth from Meritec4X (SFF-8470) Direct Attach12X (SFF-8470) Direct AttachData Rate – Wire Gauge vs. Performance Over Length4X/12X Assembly Description4X/12X Mechanical OrientationHBW Hybrids +OptionsNX+ Receptacles4-Lane Feed-Thru ConnectorBoard Mount Features & BenefitsSFP+QSFP+Meritec Contact Information
Button 2: Page 1:
Button 3: Page 12: