Optogan Luminaires

transcript

RGB 0, 152, 95

LED Lamps

Luminaires&

Lighting the 21st Century

Core Technology

The crystal growth, InGaN epitaxy, is our core technology. Based on the principles of the Nobel Prize winner Professor Zhores I. Alferov, his scientists graduated from the Ioffe Institute in St. Petersburg and patented the crystal structures. epimaxxTM represents the benefits of our epitaxy.

• maximum brightness

• maximum output linearity

• maximum chip life time

• maximum cost efficiency

Chip technology developed by scientists and engineers from all over Europe and manufactured in Germany enables us to provide leading edge performance that is “made in Germany”.

Our company focuses on energy efficient and environment friendly general lighting. Optogan is one of the technology leaders when it comes to the development and production of high brightness light-emitting diodes (HB LEDs) for a large variety of solid state lighting applications.

The international team of LED professionals and experts clearly differentiate themselves through their strong customer orientation. The Optogan Group, with its 300 employees, has plants in Landshut (Germany), Dortmund (Germany), Helsinki (Finland) and St. Petersburg (Russia).

About us

RGB 0, 152, 95

LED Lamps and Luminaires

Optogan-equipped LED lamps can now replace their counter-parts from earlier technologies and generations. State-of-the-art technology that suits applications ranging from storage spaces the size of football fields to the comfort of domestic living areas means that LED light bulbs are now becoming true retrofit products.

LED lamps do not produce heat. This is a common myth. All LEDs produce heat but it is not the case that you are likely to burn your fingers on the lamps that we supply. They won’t burn a hole in your pocket either.

With fossil resources dwindling, the need to utilise the highly efficient conversion of electrical energy for lighting is becoming increasingly apparent. With conversion rates of up to 130 lu-men per watt, our LED-powered lamps and luminaires help to save energy from the instant they are turned on.

LEDs offer a multitude of benefits, for example in the case of technical luminaires using LEDs, which can be used to create ultra-thin sources of light. With LEDs, light guide technology can be no thicker than a sheet of paper. Small, white and tight: the dream of every luminaire designer is becoming reality.

LEBEDEv GEN 1Inspired by the trees that existed in bye-gone millenniums and today provide the energy this technological work of art requires to function, the “Lebedev” bulb combines state of the art technology with a design that deserves to be on the next list of any prize nomination. With the natural flow of its form and pleasing appearance the Lebedev is a bulb that offers not only illumination but also aesthetics, ecology, technology and economy all in one.

“Lebedev” proudly bears the insignia of its foundry, an unmistakably natural form that has become indicative of Optogan’s approach to its environment and the imperceptible integration of high-tech coupled with the artistry of its design and engineering teams. Lighting the 21st Century: Lebedev is not just a bulb, it’s a way of life!

Luminous flux 620 lm

CRI 80

Power consumption 12 W

Power supply voltage 100-240 vac

The Next Generation of Lamps

RGB 0, 152, 95

POINT-Lv MR16 4WSolid state, multi source luminant with polymeric lense. Standard GU5,3 base in a form that emulates a cool beam halogen lamp. Suitable for most transformer types and trailing edge dimmers.

Luminous flux 210 | 250 lm

CRI 80

Power supply voltage 12 vac/dc

Luminous flux 270 | 300 | 360 | 400 | 630 lm

CRI 70

Power consumption 4 | 5 | 9 W

Power supply voltage 100-240 v

RADIANT GLSSolid state luminant with glass cover. Standard e27 base in a form that closely emulates a general light source bulb (GLS).

RGB 0, 152, 95

POINT-Hv PAR38Solid state, multi source luminant with polymeric lense. Standard e27 base in a form that emulates a parabolic reflector lamp. Suitable for trailing edge dimmers.

CRI 80

Power supply voltage 110-240 vac

POINT-Hv PAR30Solid state, multi source luminant with polymeric lense. Standard e27 base in a form that emulates a parabolic reflector lamp. Suitable for trailing edge dimmers.

CRI 80

Power supply voltage 110-240 vac/dc

RGB 0, 152, 95

Optolux-Office-45Standard Led drop in panel designed for the installation into an imperial suspended ceiling.

Optolux-Trade-600/1200/1500Standard Led retrofit for fluorescent tubes – lighting fixture in the standard design version for G13 base designed for the illumination of retail shops, warehouses, malls, and other indoor application.

Luminous flux 800 | 1300 | 1900 lm

RGB 0, 152, 95

Optolux-Office-60Suspended Led lighting fixture designed for the illumination of offices, meeting rooms and other indoor applications.

Optolux-Standard-45Led luminaire designed for use in general internal applications.

RGB 0, 152, 95

Optolux-Street-40/80/120Led lighting fixture designed for external illumination of streets, squares, roads, backyards, access areas, parking lots.

Optolux-Hall-100Solid state surface-mounted commercial fitting of enhanced brightness designed for illumination of warehouses and industrial premises. The product utilises a high luminous efficiency; 7200lm, 3000K light source. It´s 120° optic allows it to find applications in areas where Led lighting excels.

RGB 0, 152, 95

CRI 80 (700 lm available as 98)

Power supply voltage 220 vac

Luminous flux 400 | 700 | 1000 | 1300 lm

CRI 80 (400-700 lm available as 98)

Power consumption 9 | 12 | 18 | 21 W

For use on one or three phase euro-Track systems. The products utilise light sources unsurpassed for their high colour stability. Their optics allow them to find applications in areas where Led lighting excels. The fittings are supplied complete with their associated drivers.

RGB 0, 152, 95

Iris Recessed For mounting in prefabricated ceiling cavities. The product utilises a light source unsurpassed for its high colour stability. It‘s optic allows it to find applications in areas where Led lighting excels. The fitting is supplied complete with associated driver.

Iris SurfaceFor mounting on virtually all ceilings, walls and other stable surfaces. The product utilises a light source unsurpassed for its high colour stability. It‘s optic allows it to find applications in areas where Led lighting excels. The fitting is supplied complete with associated driver.

RGB 0, 152, 95

Progression

RGB 0, 152, 95

Gyro LEDIII

Luminous flux 400 | 700 | 1000 | 1300 lm

Gyro Cube

Luminous flux 400 | 700 | 1000 | 1300 lm

For use in false ceilings of mineral fibre or plasterboard construction. The products utilise light sources unsurpassed for their high colour stability. Their optics allow them to find applications in areas where Led lighting excels. The fittings are supplied complete with their associated drivers.

RGB 0, 152, 95

Mini Washer

Luminous flux 400 | 700 | 1000 | 1300 lm

Pin Hole

RGB 0, 152, 95

Nimble

Luminous flux 400 | 1000 | 1300 | 2000 lm

Washer

Luminous flux 400 | 700 | 1000 | 1300 | 2000 lm

Power consumption 6 | 12 | 18 | 21 | 36 W

RGB 0, 152, 95

Luminous flux 700 | 1000 | 1300 | 2000 lm

Form SpotFor use on one or three phase euro-Track systems.

Form AdjustableFor use in false ceilings of mineral fibre or plasterboard construction. The products utilise light sources unsurpassed for their high colour stability. Their optics allow them to find applications in areas where Led lighting excels. The fittings are supplied complete with their associated drivers.

Luminous flux 700 | 1000 | 1300 | 2000 lm

RGB 0, 152, 95

Universal Adjustable

Luminous flux 400 | 700 | 1000 | 1300 lm

Universal Aqua

Luminous flux 400 | 700 | 1000 | 1300 lm

RGB 0, 152, 95

Universal Drop

Luminous flux 400 | 700 | 1000 | 1300 lm

Universal Clear

Luminous flux 400 | 700 | 1000 | 1300 lm

RGB 0, 152, 95

Universal Glass

Luminous flux 400 | 700 | 1000 | 1300 lm

Universal Halo

Luminous flux 400 | 700 | 1000 | 1300 lm

RGB 0, 152, 95

Universal Open

Luminous flux 400 | 700 | 1000 | 1300 lm

Imp 400For use in false ceilings of mineral fibre or plasterboard construction. The products utilise light sources unsurpassed for their high colour stability. Their optics allow them to find applications in areas where Led lighting excels. The fittings are supplied complete with their associated drivers.

CRI 80 (400 lm available as 98)

RGB 0, 152, 95

LED - BasicFor use in false ceilings of mineral fibre or plasterboard construction. The products utilise light sources unsurpassed for their high colour stability. Their optics allow them to find applications in areas where Led lighting excels. The fittings are supplied complete with their associated drivers.

AtriumSolid state recessed downlight for use in false ceilings of mineral fibre, plasterboard or metal sheet construction. The product utilises an Led light source unsurpassed for its high colour stability. It‘s 10°optic allows it to find applications in areas where ceilings are high and the illumination target is small.

Luminous flux 700 | 1000 | 1300 | 2000 lm

RGB 0, 152, 95

For further information please contact us. Data sheets upon request.

Specificationsandavailabilityofproductsarenotguaranteed.

Optogan GmbHJenaer Str. 1 | 84034 Landshut | Germany

phone +49 871 684808 | fax +49 871 684829

info@optogan.com | www.optogan.com

Optogan Luminaires

Documents