n Current toroid located in control, with easy access for connectionn No shunt resistor requiredn Current adjustment via potentiometer, 1 to 20 Ampsn Universal input 24-240VAC and 24VDCn Monitored current must not exceed 100 Ampsn Relay output form: SPDT – 8 Ampsn Output indicator: Red LED n Single-phase applications n DIN rail mountingn UL and CE approvals, RoHS compliant

function

fEAtuRES

SPEcificAtionS

Peltec 332 current sensor is designed for single-phase overcurrent monitoring.

Set point is determined by adjustable potentiometer from 1 to 20 Amps.

Relay transfers on sensed overcurrent.

10/15/08

input terminals . . . . . . . . . . . . A1–A2

input voltage . . . . . . . . . . . . . . 24–240VAC (AC 50/60Hz), 24VDC

input voltage tolerance . . . -15% to +10%

Power consumption (max) . . 1.5VA

current range. . . . . . . . . . . . . . 1–20 Amps

time settings by . . . . . . . . . . . Potentiometer

Setting accuracy . . . . . . . . . . . 5%

Repeatability . . . . . . . . . . . . . . <1%

Limit values tolerance . . . . . 5%

overload capacity (max) . . 100A/10s

Relay output form . . . . . . . . . SPDT

Rated current . . . . . . . . . . . . . . 8 Amps

Switching capacity . . . . . . . . 2500 VA/ AC, 240 W/ DC

output indicator . . . . . . . . . . Red LED

operating temperature . . . -20°C to +55°C

Storage temperature . . . . . . -30°C to +70°C

Dielectric strength . . . . . . . . 4 kV

operating position . . . . . . . . any

Mounting . . . . . . . . . . . . . . . . . . DIN rail EN 60715

Protection degree . . . . . . . . . IP 40 from front panel

Wire size (max) . . . . . . . . . . . . 10AWG

Standards . . . . . . . . . . . . . . . . . EN 60255-6, EN 61010-1, UL, CE, RoHS

315-655-8476 n www.peltectimers.com

332cuRREnt

SEnSoR

15-18LED

Imax

IHysteresis

Input Voltage

300 Series

fEAtuRES WiRing DiAgRAM

2747 Route 20 East, Cazenovia, NY 13035315-655-8476 n www.peltectimers.com 10/15/08

15

16 18 A1

A2

A1 A2

15 18

16

Peltec332 cuRREnt SEnSoR

InputVoltage

Input terminals

Current setting

Output indicator

Sensed wire10AWG max

Output terminals

Input indicator

16

15 18

A1 A2