2
Pel-Tec - high quality steel pellet boilers. Boiler built-in pellet burner with automatic ignition and automatic self-cleaning function for excellent boiler operation. The automatic flue gas heat exchanger cleaning function ensures even heat exchange and higher boiler efficiency. Built-in automatic ash cleaning. The multifunctional boiler control unit in the standard package ensures uninterrupted operation of the boiler as well as controls the amount of pellets in the bunker. The built-in backflow protection ensures the proper operation. Characteristics of Pel-Tec boilers: • Pel-Tec central heating pellet boiler with built-in burner and nominal heat capacity of • 12, 18, 24, 36, 48, 69 and 96kW. • High boiler efficiency and low maintenance requirements • Low emissions and harmful emissions • Modulating boiler operation • Automatic self-cleaning for burner grille and flue gas channels • Flue gas temperature sensor and level sensor for pellet bunker • Built-in backflow protection with 4-way valve • Multifunctional digital controller with touch-screen panel • Accessories: room thermostat, GSM alarm module for the boiler and pellet bunker, automatic pellet filling from another pellet storage (additional equipment) • Lambda probe • WiFi module. PelTec *The internal diameter and height of the chimney must be strictly in line with the boiler's nominal capacity. It must comply with all national regulatory documents and manufacturer's recommendations. Tehniskie parametri G H Nominal heat output Heat power range *Flue gas outlet diameter Inlet / outlet diameter Discharge diameter Maximum operating temperature Maximum working pressure Pellet tank capacity Total boiler length A Total boiler width B Total boiler height C Boiler block length D Boiler block width E Boiler block height F Size G Size H Contact phone: +371 28818088, +371 29149923 E-mail: [email protected] Homepage: www.centrometal.lv HEATING TECHNIQUE CENTROMETAL PelTec Heating pellet boiler 12-96kW 12 18 24 36 48 12 3,6-12 130 1” 1/2” 90 2,5 340 1105 1200 1560 765 650 1560 1235 1515 kW kW f(mm) R R °C bar lit. mm mm mm mm mm mm mm mm 18 5,4-18 130 1” 1/2” 90 2,5 340 1105 1420 1560 765 880 1275 765 1040 24 7,2-24 130 5/4” 1/2” 90 2,5 340 1080 1420 1560 736 880 1345 855 1140 36 10,8-36 150 5/4” 1/2” 90 2,5 340 1160 1485 1560 765 965 1345 855 1160 48 14,4-48 150 5/4” 1/2” 90 2,5 340 1175 1485 1560 765 965 1495 995 1310 69 96 69 20,7-69 200 2” 1/2” 90 2,5 530 1240 1940 1560 765 - 1345 1275 1345 96 28,8-96 200 2” 1/2” 90 2,5 530 1310 1965 1560 765 - 1495 1275 1345
