2
Equipment for central heating systems BIO-CK P Unit (nominal heat output from 25 to 100 kW) is designed for burning wood chips. It consists of a hot water boiler BIO-CK P, a burner with the fuel transporter and digital boiler control. A fuel tank with a transporter and mixer should be added to the BIO-CK P Unit. This equipment is designed for small and medium sized premises, as a main or, nowadays more often, as an alternative heat source. Contact phone: +371 28818088, +371 29149923 E-mail: [email protected] Homepage: www.centrometal.lv HEATING TECHNIQUE CENTROMETAL BIO-CK P Unit 25-100kW It is distinguished by a successful combination of modern technologies and quality construction materials s well as simplicity of installation and use. Proven technical solutions make it safe and reliable in operation. It is manufactured in accordance with the standards EN 303-5 and ISO 9001; ISO 14001. • Central heating equipment designed for wood chips and wood shavings burning sized P16A-P45A (G30-G50) and with nominal heat output from 25 to 100 kW. • Maximum permitted fuel moisture content is 35% (M35). • A fuel tank with a transporter and mixer should be added to the BIO-CK P Unit. • Available as additional equipment is woodchips storage to be installed indoors or outdoors as well as a wood chips mixer with a transporter to be installed inside into existing storage/room. • Optionally the boiler can be ordered with burner mounted on left or right side. • The fan and electrical heater positioned in the burner, operated by the controller, ignite automatically and maintain the flame. • A carefully sized combustion chamber with triple pass flue gas flow assure boiler operation at high efficiency. This makes the boiler very economical in use. • The combustion chamber is made out of a high quality sheet metal (5 mm thickness). • Thermal safety system can be connected in through pre-prepared apertures. • The body of the boiler is delivered separately from the casing with thermal insulation, the burner with fuel feeder and the boiler digital controller which enables easier transportation and assembly with minimum risk. • Basic boiler delivery includes a thermometer and cleaning set. • Required power supplies: 380/400 V. • BIO-CK P Unit can be installed directly to heating system or through accumulation tank (CAS) with a minimum volume of 12 l/kW and 3-way thermal valve on 60°C. • Option of additional installation of flue gas extraction fan to boiler’s flue gas exhaust. PRODUCT CHARACTERISTICS HIGH QUALITY A successful blend of modern technology and high quality construction materials with easy installation and use. EFFICIENT Keeping the combustion gases in the three passages ensures a high degree of boiler utilization, making it “economical”.nd high quality construction materials with easy installation and use. AUTOMATION The fan and electric heater located in the burner, driven by regulation, automatically burn off fuel and maintain flame. INSTALLATION Delivered in parts that allows easy transportation and installation and reduces the risk of damage
