Post on 11-Aug-2014
description
transcript
POWER TRANSMISSION
SYSTEM
M.M.Palitha Mahinda MunasingheFarm Mechanical Instructor
palithamahinda@yahoo.com
2
Power Transmission system 11/08/2010
mmpm
m
ENGINE
FLY WHEEL
CLUTCH
GEAR BOX
PROPPLER SHAFT
FINAL DRIVE
AXCLE
mmpm
m
3
11/08/2010ENGINE
Internal combustion gasoline engines run on a mixture of gasoline and air. The ideal mixture is 14.1 parts of air to one part of gasoline (by weight)
mmpm
m
4
11/08/2010FLY WHEEL Clutch Mounted
on Fly Wheel
Dual Mass Flywheels
A clutch is a mechanical device that provides for the transmission of power from one component to another when engaged, but can be disengaged
mmpm
m
5
CLUTCH
Clutch Plate Pressure Plate
Thrust Bearing
11/08/2010
mmpm
m
6
CLUTCH(Diaphragm Type)
Clutch Cover
11/08/2010
mmpm
m
7
MULTI-PLATE WET CLUTCH (Power Tiller) 11/08/2010
mmpm
m
8
MULTI-PLATE WET CLUTCH11/08/2010
mmpm
m
9
GEAR BOX 11/08/2010
The gearbox is the central component of the vehicle's transmission system. In this manner, a gearbox converts an engine's speed into torque, or thrust, which propels the vehicle forward or revers direction
mmpm
m
10
GEAR BOX CONNECTED WITH DUAL CLUTCH11/08/2010
mmpm
m
11
11/08/2010
AUTOMATIC GEAR BOX(Torque Converter)
This kind of gear boxe will automatically select the appropriate gear without involvement by the driver. For this reason it uses a torque converter rather than a clutch to engage the sliding gear. The torque converter is placed between the engine and the transmission
mmpm
m
12
PROPPLER SHAFT11/08/2010
An automobile may use a longitudinal shaft to deliver power from an transmission (Gear box) to the final drive
mmpm
m
13
FINAL DRIVE11/08/2010
To transmit the power to the wheels while allowing them to rotate at different speeds. Also as the final gear reduction in the vehicle, slowing the rotational speed of the transmission
mmpm
m
14
AXLES 11/08/2010
A pair of short drive shafts is commonly used to send power from a final drive (Differential unit) to the wheels
15
11/08/2010mmpm
mPOWER TRANSMISSION
SYSTEM