Post on 27-Dec-2015
transcript
Presentation
ATM Vision 3
Product Presentation
Overview
ATM Vision 3 Target Markets
Target Applications / Requirements
System Architecture
Features
In a nutshell
TheMa Service Management
ATM Vision - Target Markets
Telcoswant to offer end-to-end service to broadcasters incl. compression technology
Network providerswant to offer network access and their available bandwidth
Broadcasterswant to get a flexible, highly reliable and cost effective service
Cable operatorswant a reliable, cost effective, future prove service with scalable and efficient use of bandwidth
ATM Vision - Target Applications
Video/Audio Contribution
Video/Audio Distribution
DVB-T Multi Service
ATM Edge Routing
Video Contribution Requirements
Single Program MPEG stream
High quality (MPEG-2 4:2:2 @60Mbit/s)
Point-to-Point connection
Connection on demand
Fast clock recovery with high accuracy
High availability, flexibility and interoperability
Inter-Studio communication incl. Data, Telephony & Voice
Easy to use user front end
Accounting and billing information
Video Distribution Requirements
Multiple MPEG MPTSs
Medium to low quality (MPEG-2 4:2:0 @4 to 8 Mbit/s)
High stability of the recovered clock
Forward Error Correction (FEC)
Static point-multipoint connection configuration
High reliability
Redundancy
Centralized management for quality monitoring and fault handling
DVB-T Applications Requirements
Same requirements as for distribution
Additional:
Integration of Telephony and Internet Services
Synchronization for Single Frequency Networks (SFN)
ATM Edge Routing Requirements
E1/T1 Circuit Emulation
Unstructured and Structured mode
Ethernet Bridging
IP Routing
RIP2, OSPF, BGP,...
Integration of LAN services
CLIP/ATMARP, LANE, MPOA, FR,...
Security
Firewall, NAT, Proxy...
The Solution
The ATM Vision 3 is ATecoM’s solution for…
…Video/Audio Contribution
... Video/Audio Distribution
... DVB-T Multi Service
... ATM Edge Routing
ATM Vision 3
AV-1 and AV-3 Rear View
ATM Vision 3 – Base
Module slot for ATM network interface
Module slot for cascade interface
onboard SAR (Control & Data)
2 Ethernet ports (10BaseT + 10/100BaseT)
5 programmable contact closures
4 (AV-3) or single (AV-1) extension slot for Multiservice or AAL1-Function boards
Up to 4 (16) DVB-ASI / SDTI or
Up to 16 (64) E1/T1 CES Interfaces
System Controller
The System Controller
ATM Vision 3 - Network Interfaces
SDH interfacesSTM-1 single-mode (long and short haul)
STM-1 multimodeSTM-1 electricalSTM-1 UTP
PDH interfacesG.703 E3G.703 DS3
otherATM25
Line Interfaces
ATM Vision 3 - Service Interfaces
DVB interfacesDVB-SPI (LVDS, RS422, ECL)
DVB-ASI
SDTI Interface DVCPro 25/50
DV-CAM
MPEG TS/ES
Clear Channel interfacesG.703 E2
G.703 E3
G.703 DS3
Service Interfaces (cont.)
E1/T1 CESUnstructured mode
Structured mode
Ethernet Bridge
Multi-Service Carrier Board
DVB-ASI Service Interfaces
SDTI Service Interface
Firmware
Linux Operating System
SignalingUNI 3.1, UNI 4.0 and Q.2931
ILMI 3.1 and ILMI 4.0
IP RoutingRIP, BGP, OSPF, VRRP, ...
CLIP and LANE
IP FilteringFirewall
SNMP agent
ATM Vision 3 - In a nutshell
The ATM Vision 3 System
meets the requirements of high-quality broadcasting by
an outstanding quality of clock recovery andan efficient and powerful forward error correction
covers contribution and distribution servicesintegrates video, audio and data servicesease the migration from traditional SDH/PDH networks towards ATM networkssupports all common User- and Network interfaces andprovides all relevant software features
The complete picture
The Element Manager
Featuresdifferent access levels
full Configuration of all services via easy to use GUI
one click Operation (SVC and PVC)
online state reporting and extensive statistics gathering and display
powerful protocol debugging
platform independence