Post on 05-Jul-2018
transcript
8/16/2019 Product Guide_Power Generation Applications.pdf
1/28
PRODUCTGUIDE
Electronic edition – Power generation applications
8/16/2019 Product Guide_Power Generation Applications.pdf
2/28
The interactive simulator provides a
taste of the new InteliVision 8, with
demo and preview options illustrating
screen information and function.
s i m u l a t o r
O N L I N E
8/16/2019 Product Guide_Power Generation Applications.pdf
3/28
InteliVision 8 is a new generation colour display unit for
InteliGenNT, InteliSysNT, InteliMainsNT and InteliDrive
controllers. It is designed as a simple, easy to use
Plug and Play solution, which also features our
unique TRENDS monitoring as a standard feature.
It is the first colour display
in the Power Generation field.More info on page 54.
www.comap.cz/intelivision8
http://-/?-http://-/?-
8/16/2019 Product Guide_Power Generation Applications.pdf
4/28
The InteliDrive Mobile is a highly flexible sophisticated mobile electronic
controller, which features outstanding control, monitoring and protection for
diesel and gas engines as well as driven technology.
The new controller offers range of specific functions suitable for mobileapplications as hydraulic system control, communication with sensors and
operational devices control.
Most commonly, these tailored applications meet the specific control
requirements of mobile hydraulics, engine driven compressors and pumps.
InteliDrive® Mobile
SWITCHED ONTO INNO
InteliCompactNT
InteliCompactNT models are new integrated
controllers for gen-sets operating in both
standby and parallel modes. Functionality,
optimized for ease of use, installation and
configuration, includes built-in synchronizer
and digital isochronous load sharer.
… more on page 14
more on page 40
8/16/2019 Product Guide_Power Generation Applications.pdf
5/28
ATION
The new InteliATSNT controllers are
designed to monitor the incoming AC
mains supply (1 or 3 phases) for under
voltage, over voltage, under frequency,
over frequency and voltage unbalance.
… more on page 8
InteliATSNT
8/16/2019 Product Guide_Power Generation Applications.pdf
6/28
WELCOME TO OUR
PRODUCT GUIDE
Following the positive feedback
from our first Product Guide we
have updated the second issue
with more information on an ever-
growing range of control products.
In the meantime, our design and
development teams have worked
very hard to create exciting new
control solutions to meet customers’
application needs – all of which aredetailed in the new guide.
We hope you find it just as useful and
practical as before. Inside you will
find technical information, product
features and functions, alongside
customer feedback on how the
products have performed in the
field. Hearing what you think is very
important to us, so if you would like
to share you experience of using
our products please let us know byemailing your story to info@comap.cz
Overall, it offers a comprehensive
guide to our entire range of products
and accessories. I hope you find it
both helpful and invaluable.
Regards
Libor Mertl – Managing Director
Power Generation Controllers 7
ATS controllers 8
Gen-set controllers 10
Generator controllers 28
Drive Power Controllers 33
Engine controllers 34
Off-road machinery controllers 40
Associated Control Products 43
Accessories 44
PC tools 58
Mains protections 62
Electronic potentiometers 64
Applications 65
Power generation applications 66
Drive power applications 80
About ComAp 91
CONTENT
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-
8/16/2019 Product Guide_Power Generation Applications.pdf
7/28
This section demonstrates the flexibility and capability of ComAp power
generation control solutions by illustrating a wide range of applicationsincluding single gen-sets, multiple sets operating in parallel and complex
CHP (cogeneration) applications. Each example shows how ComAp control
products integrate seamlessly to deliver a complete and effective control and
monitoring package for both typical and complex power applications.
Power generation applications 66
ComAp drive power control products are suitable for a wide range of diesel
engine powered plant and equipment. The following applications are just a
small selection to demonstrate the versatility of ComAp drive power products
and accessories for use in this demanding market.
Drive power applications 80
Applications
A P P L I C
A T I O N S
65
http://-/?-http://-/?-
8/16/2019 Product Guide_Power Generation Applications.pdf
8/28
A P P L I C A T I O N S / A U T O M A T I C T R A N S F E R S W I T C H
M A I N S
I A - N T
I L - N T M R S 1 0
S t a r t / S t o p
R e a d y t o l o a d
T r a n s f e r d e m a
n d
E N G I N E R
O O M
MA R K E T
O F F I C E
SUPERMARKET
Open / delayed transition – auto/manual transfer
z Stand-by gen-set. InteliATSNT continuously monitors mains supply for under voltage,
over voltage, under frequency, over frequency and voltage unbalance. In the case of
mains failure it sends a remote start command to the standby gen-set.
z InteliATSNT waits for “Ready To Load” signal or standby gen-set voltage – configurable
- and switches load to the standby generator.
z After the mains returns the InteliATSNT switches load back to mains and sends remote
stop command to the standby gen-set.
z Different delay intervals can be set for individual changeover phases.
z The changeover can take place also on explicit demand, not only after mains failure.
z ATS function works with backup battery or in reduced mode without backup battery.
z 1× InteliATSNT STD
z 1× arbitrary gen-set controller (e.g. InteliLiteNT MRS 10) or key start box
Description:
Scope of supply:
66
8/16/2019 Product Guide_Power Generation Applications.pdf
9/28
A P P L I C A T I O N S / S I N G L E G E N S E T
Prime mover system – remote monitoring via GSM
z Manual and remote start of gen-set with electronic engine.
InteliLiteNT MRS 16 starts, controls and monitors the gen-set and
controls the circuit breaker to supply the load.
z Service provider can monitor and control gen-set operation
remotely via GSM modem.
z Controller sends active SMS or Emails upon alarm event.
z Generator is protected by built in over/under voltage and
frequency protections and IDMT overcurrent protection.
z Controller communicates with engine management unit by CAN
J1939 bus. Engine values and alarms are visible on graphical
LCD screen in plain language – no need to learn cryptic flashing
or numeric error codes.
z 1× InteliLiteNT MRS 16
z 1× IL-NT RS232
z 1× GSM modem (not delivered by ComAp)
Description:
Scope of supply:
A P P L I C
A T I O N S
67
8/16/2019 Product Guide_Power Generation Applications.pdf
10/28
A P P L I C A T I O N S / S I N G L E G E N S E T
I L - N T A M F
2 5
G S M M O D E
M
M A I N S
TV
TR ANSMITT
ER J1939
S E R V I C E P
R O V I D E R
G S M M O D E
M # I L - N T :A
L = ( ! F l s
O i l P r e s s u r e, ! W
r n
F u e l L e v e l )
Standby system – remote monitoring via GSM
z Stand-by gen-set with electronic engine. InteliLiteNT
AMF 25 continuously monitors a mains supply and
automatically starts an engine and switches load to a
standby generator set in case of mains failure.
z Service provider can monitor gen-set operation
remotely via GSM modem.
z Generator is protected by built in over/under voltage
and frequency protections and IDMT overcurrentprotection.
z Controller communicates with engine management unit
by CAN J1939 bus. Engine values and alarms are visible
on graphical LCD screen in plain language – no need to
learn cryptic flashing or numeric error codes.
z 1× InteliLiteNT AMF 25
z 1× IL-NT RS232
z 1× GSM modem (not delivered by ComAp)
Scope of supply:
Description:
68
8/16/2019 Product Guide_Power Generation Applications.pdf
11/28
I G L - R A 1 5
I C - N T S P t M
S E R V I C E
P R O V I D E R
F I R E W A L L
I N T E R N E T
ENGINE ROO
M
M A I N S
DISTRIBUTI
ON POINT
SURGERY
I B - L i t e
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
Standby system with soft return– remote monitoring and control via Internet
z Stand-by emergency gen-set accomplishes power supply to essential load during power drop. z Controller automatically starts the gen-set in case of mains failure and switches load to generator.
When mains returns, it synchronizes the generator back, softly unloads it and stops the engine.
z Generator automatically synchronizes to mains in Test mode. Test mode can be used to check the
gen-set condition and to provide uninterrupted power supply in case of expected mains failure.
z Status of the gen-set is displayed in the distribution point.
z InteliMonitor is used for remote monitoring and control.
z History file with performance log stored in InteliCompactNT SPtM allows easy backtracking and
problem solving.
z Seamless communication with engine’s electronic injection control unit, all important values and
alarms are visible on screen of InteliCompactNT and stored to the history file in plain language.
z 1× InteliCompactNT SPtM
z 1× IG-AVRi
z 1× IG-AVRi-TRANS/LV
z 1× IB-Lite
Scope of supply:
Description:
A P P L I C
A T I O N S
69
8/16/2019 Product Guide_Power Generation Applications.pdf
12/28
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
R E M O T E
C O N T R O L
R O O M
I G - I B
F I R E W A L L
I N T E R N E T
M C - N T
M A I N S
C A N 2
L O A D
I C - N T M I N T
I C - N T M I N T
I C - N T M I N T
L O C A L
C O N T R O L
R O O M
Multiple gensets in parallel to grid – remote monitoring and control via Internet
z Fully automatic system reduces electric energy bill by keeping the mains power below high tariff level during peak hours.
z At the same time it accomplishes emergency standby power in case of mains failure.
z Remote control and monitoring uses available factory LAN for connection between a Power house and a Control room. z InteliMonitor is used for remote monitoring and control.
z Wide range of engine and generator protections, including vector-shift protection.
z Automatic forward and reverse synchronization with soft load ramp-up and ramp-down during changeover.
z Active and reactive load import/export control and load-sharing.
z Automatic optimization of number of running sets according to load.
z Peak loping controlled by built in Scheduler, engines automatically run during peak period.
z History file with performance log stored in InteliCompactNT MINT allows easy backtracking and problem solving.
z Seamless communication with engine’s electronic injection control unit, all important values and alarms are visible on
screen of InteliCompactNT and stored to the history file in plain language.
z 3× InteliCompactNT MINT
z 3× IG-AVRi
z 3× IG-AVRi-TRANS/LV
z 1× MainsCompactNT
z 1× IG-IB
z 1× IG-IB3 dongle
Description:
Scope of supply:
70
8/16/2019 Product Guide_Power Generation Applications.pdf
13/28
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
Rental sets
I G - N T
I M - N T
I G - N T
I G - N T
L O A D
z Containerized rental gen-sets can be used for maintenance of power lines without interruption of power delivery
to end consumer.
z Gen-sets are connected one-by-one to mains at the consumer’s end and manually loaded. Power line is then
manually disconnected and consumer is powered from generators running in parallel.
z The group of gen-sets is reverse synchronized to mains after finalization of maintenance on power line.
InteliMainsNT keeps generators and mains in synchronism enabling manual reconnection to power line.
z InteliMainsNT is built in a small shock proof suitcase.
z Interconnection of containers is done by color coded not-interchangeable connectors.
z Each gen-set can be used in Stand-by, Single parallel to mains and Multiple parallel modes according to the
position of Mode selector switch.
z Frequency selector enables switching between 50Hz / 230V and 60Hz / 277V mains.
z 3× InteliGenNT
z 3× IGS-NT-LSM+PMS dongle
z 3× IG-AVRi
z 3× IG-AVRi-TRANS/LV
z 1× InteliMainsNT
Description:
Scope of supply:
A P P L I C
A T I O N S
71
8/16/2019 Product Guide_Power Generation Applications.pdf
14/28
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
I M - N T
I G - N T
I M - N T
J 1 9 3 9
I G - N T
J 1 9 3 9
J 1 9 3 9 B T B
C A N 2
I M - N T
P L C
I G - N T
I G - N T
E N G I N E R
O O M 1
P R O D U C T I O
N HA L L 1
M A I N S
Complex installation – multiple grids
z Essential load is fed by two mains feeders during normal
operation to achieve maximum reliability of the power delivery.
Bus-tie breaker (BTB) is closed.
z Complex switching algorithm running in external PLC defines
which breakers are opened and which are closed independent
on availability of two mains and gen-sets.
z Reverse synchronizing on both feeders and on bus-tie breakeris accomplished by 5 InteliMainsNT modules controlled by
external PLC.
z Active and reactive load-sharing can operate in two modes:
– Sharing the load between all running gen-sets – if BTB is
closed
– Sharing the load in two independent groups – if BTB is
opened
z Automatic power dependant start/stop can operate in two
modes as well:
– Running on all gen-sets – if BTB is closed
– Running in two independent groups – if BTB is opened
z All controllers are interconnected by one CAN bus all thetime, disregarded if BTB is closed or open, no need for relays
reconnecting the CAN bus.
z Complete system is remotely controlled and supervised from
Control room connected via company LAN and IG-IB to all
controllers.
Description:
72
8/16/2019 Product Guide_Power Generation Applications.pdf
15/28
I N T E R N E T
I M - N T
I G - N T
I M - N T
J 1 9 3 9
I G - N T
J 1 9 3 9
J 1 9 3 9
C A N
2
L A N / W
A N
I G - N T
I G - N T
I G - I B
G I N E R O O
M 2
P R O D U C T I O
N HA L L 2
C O N T R O L R
O O M
M A I N S
GA T E
FACTOR Y
Ltd.F
z 6× InteliGenNT
z 6× IGS-NT-LSM+PMS dongle
z 6× IG-AVRi
z 6× IG-AVRi-TRANS/LV
z 5× InteliMainsNT
z 1× IG-IB
z 1× IG-IB 15 dongle
z 1× optional PLC
(not delivered by ComAp)
Scope of supply:
A P P L I C
A T I O N S
73
8/16/2019 Product Guide_Power Generation Applications.pdf
16/28
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
R E C E P T I O N
K I T C H E N
R O O M S
LIFT
E N G I N E R
O O M
C O N T R O L R
O O M
I M - N T
M A I N S
I S - N T
J 1 9 3 9
J 1 9 3 9
C A N 2
I S - N T
I N T E L I V I S I O
N 8
I N T E L I V I S I O
N 8
Standby system with load shedding – advanced displays
z The system guarantees emergency standby power in case of mains failure.
z InteliMainsNT provides AMF function and activates mains to gen-sets changeover in the case of mains failure no break return to mains.
z Load shedding can take place during the changeover to trip the unessential load when gen-set goes to island.
z Gen-set starts, the power is ramped-up, load is reconnected. The second gen-set is started if needed (more load requires more gen-
set power).
z Automatic forward and reverse synchronisation with soft load ramp-up and ramp-down during changeover is available.
z Wide range of engine and generator protections, including vector shift protection are standard features.
z Automatic optimization of number of running sets according to load can be selected.
z Automatic equalization of running hours of particular engines is available.
z The second gen-set can be used as a backup set.
z History file with performance log stored in InteliSysNT allows easy backtracking and problem solving.
z 2× InteliSysNT
z 2× IGS-NT-LSM+PMS dongle
z 2× InteliVision 8
z 1× InteliMainsNT z 2× IG-AVRi
z 2× IG-AVRi-TRANS/LV
Description:
Scope of supply:
74
8/16/2019 Product Guide_Power Generation Applications.pdf
17/28
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
Multiple loads – several mains supplies
G C B # 3
C G C B
J 1 9 3 9
G C B # 1
M A I N S # 1
M A S T E R
S E L E C T O R
F E E D B A C K
M A S T E R
S E L E C T O R
M C B # 1
M A N 1, 2, 3
G C B # 2
M A I N S # 2
M C B # 2
M A I N S # 3
M C B # 3
I S - N T
M a i n s P r o
M a i n s P r o
M a i n s P r o
M C B
G C B
1, 2, 3
P L C
P O W E R C O
N T R O L
C E N T E R
z In case of manipulation, the system switches from one branch to another by turning of the Master Selector Switch (MSS): BO
MSS turn is used to turn the MSS.
z The mains voltage measurement, generator current measurement, MCB and GCB feedbacks, MCB and GCB control signals and
Mains Failure (MF) signals (MainsPro outputs) are switched by the MSS, so that the system continuously “sees” only the selected
branch.
z MCB and GCB are operated by pulse signal (GCB open/close, MCB close). The pulse is issued as a request for CB operation and
terminated at the moment of corresponding feedback receipt.
z The MainsPro relays monitor mains on all 3 branches. In case of any MF, the gen-set is started.
z In case of MF on any branch, the proper MainsPro opens MCB, MSS switches to the failed branch and closes GCB.
z If a MF occurs on a different branch at the same moment, the controller finishes manipulation of GCB, MSS switches to a
different branch and closes the other GCB.
z After an existing MF state terminates on any branch, the MSS turns to this branch, InteliSys NT reverse-synchronizes and closes
MCB and opens GCB. Short-time parallel is allowed on the current branch.
z The MSS is blocked from moving away from a branch, where:
– parallel operation is in effect
– GCB open/close or MCB close signals are active
– MF signal is in effect and GCB is open
z In case that all existing MF are solved and all GCB’s are open, the gen-set stops.
z 1× InteliSysNT
z 3× MainsPro
z 1× IG-AVRi
z 1× IG-AVRi-TRANS/LV
z 1× PLC (not delivered by ComAp)
z 1× Motorized rotary switch with 3 × 16 contacts (not delivered by ComAp)
Description:
Scope of supply:
A P P L I C
A T I O N S
75
8/16/2019 Product Guide_Power Generation Applications.pdf
18/28
R E C E P T I O
N
O F F I C E
E N G I N E R O
O M
P O O L
Heat exchanger/boiler Exhaust
Heating water
Fuel line
Engine
Generator Electrical supply
Electrical
panel
P r e s s u r e
T e m p e r a t u r
e
T e
m p e r a t u r e
Temperature
Pressure
T e m p e r a t u r e
P r e s s u r e
T e m p e r a t u r e
P r e s s u r e
Pressure
Temperature
Temperature
T e m p e r a t u r e
T e m p e r a t u r e
T e m p e r a t u r e
P u m p
P u m p
V e n t i l a t i o n
H e a t ( J o u l e )
2009
2009
A P P L I C A T I O N S / P A R A L L E L I N G G E N S E T S
Combined heat and power (CHP) – cogeneration
76
8/16/2019 Product Guide_Power Generation Applications.pdf
19/28
8/16/2019 Product Guide_Power Generation Applications.pdf
20/28
S H A F T G
P R O P U L
S I O N
E N G I N E
A U X G E N
1
A U X G E N
2
B O W T H R
U S T E R
A U X G E N E R
A T O R 1
A U X G E N E R
A T O R 2
E N G I N E
C O N T R O L L
E R
E N G I N E
C O N T R O L L
E R
A U X G E N E R
A T O R
C O N T R O L L
E R
A U X G E N E R
A T O R
C O N T R O L L
E R
S H A F T G E N
E R A T O R
C O N T R O L L
E R
S H A F T G E N
E R A T O R
P R O T E C T I O
N
E S S E N T I A L
C O N S U M E R
S
H E A V Y
C O N S U M E R
B L O C K I N G
N O N E S S E N
T I A L
C O N S U M E R
S
A U X G E N E R
A T O R
P R O T E C T I O
N
A U X G E N E R
A T O R
P R O T E C T I O
N
G E N E R A T O
R 1
G E
A P P L I C A T I O N S / P A R A L L E L I N G G E N E R A T O R S
Ship power management system
78
8/16/2019 Product Guide_Power Generation Applications.pdf
21/28
HA F T
A T O R
2
S H A F T G E N
E R A T O R
z Two auxiliary generators and one shaft generator deliver electricity for systems of the ship.
Generators are controlled by GeCon controllers in MINT (Master) configurations.
z PMS can work in three basic operational modes:
– MANUAL – complete manual control
– SEMI-AUTO – synchronizing and load-sharing is automatic; genset start/stop and loadtransfer between aux and shaft generators in manual
– AUTO – complete automatic control
z PMS continuously evaluates load reserve on the bus and blocks start of the bow thruster if
the load reserve is insufficient.
z PMS automatically trips the non-essential consumers, if the power system is overloaded.
z PMS can control up to 10 independent circuits of non-essential consumers.
z Freely programmable built-in PLC functions are used to accomplish load transfer between
shaft and auxiliary generators.
z 6× InteliGenNT GeCon
z 2× InteliDrive DCU Marine
z 3× InteliVision 8
z 6× IG-AVRi
z 6× IG-AVRi-TRANS/LV
Description:
Scope of supply:
A P P L I C
A T I O N S
79
8/16/2019 Product Guide_Power Generation Applications.pdf
22/28
USA
Netherlands Slovakia
Canada
“We admire ComAp products because of their innovative features.
These include forward looking technological development
of monitoring; the ability to solve non-standard customers’
requirements and the huge spectrum of opportunities for running
of power supplies.”
Peter ŠiškaChief of Application and costing
estimation department
www.elteco.sk
“ComAp’s compressor and engine control panel solution optimizes
natural gas production on Boss’s booster units by providing
accurate process control using digital pressure transducers.
Our customers are very happy with its event history capabilities
as well as its compressor and engine protective features. We also
value the fact that the ComAp ID-DCU panel is fully compatible with
future electronic emission certified engines
and control capabilities. BOSS Industries has
standardized on the ComAp panel for our gas
well booster compressor units.“
Ed KetchamVP Sales
www.bossair.com
“All our generator sets and propulsion engines are equipped with
a ComAp engine controller, ID-DCU Marine. They are approved by
all major Ship Classification Companies. The units fulfill our high
quality standards, have many applications and are widely used.
Remote monitoring is one of them, which Sandfirden Technics is
using in some cases.“
Harry JasperService Manager
www.sandfirden.nl
”When I first saw InteliVision, I immediately recognized its
potential for our power generation systems. The large easy to read
color display and customer-friendly interactivity is precisely what
our customers have been looking for. We have already installed
systems with InteliVision and received very positive feedback from
our customers on the units performance.“
Santokh SahotaEngineering Manager
www.simson-maxwell.com
Boss Industries
Sandfirden Technics ELTECO
Simson-Maxwell
Satisfied CustomersWorldwide
90
8/16/2019 Product Guide_Power Generation Applications.pdf
23/28
About ComAp
91
8/16/2019 Product Guide_Power Generation Applications.pdf
24/28
Excellent and reliable product solutions
ComAp specializes in creating electronic control andmanagement solutions for use in the power generation
industries and drive power markets. Our portfolio of
products, software and accessories is designed to support
emergency power, standby power generation and engine
driven applications all over the world. We also work closely
with our customers to develop unique customized and turn
key solutions for ordinary and extraordinary applications
delivering high standards of excellence on every project.
ComAp products
represent some of the
most reliable solutions
on the market today.
Every component and
product undergoes the
most rigorous standards
during manufacture,
with every stage being
undertaken in accordance
with international ISO
9001 certification. Our
products are backed
with the approvals from
92
ComAp
ComAp is a dynamic international company
with a solid reputation for delivering
innovative electronic solutions to the power
generation, industrial engine and equipment
markets. By providing customers withstate-of-the-art products, ComAp has built
a name for delivering excellent reliability
and good value.
major Marine Certification Societies. Accreditation at the
highest-level breeds confidence, and every ComAp product
is supplied with an appropriate warranty and after-sales
support for complete peace of mind.
People make the difference
ComAp‘s key strengths are flexibility, experience,
knowledge and enthusiasm. This blend of values defines
our personality and gives you the assurance of a truly
honest and positive relationship. By supporting our
people, investing in their development and encouraging
creativity, our teams work hard to find new opportunities,
technologies and solutions that enable us to successfully
help our customers solve their problems effectively.
At ComAp, we believe passionately in the importance
of continuously developing new technology along with
forward thinking software and hardware to maintain the
enviable position as worldwide leader in communicationand control for power generation and drive power
applications.
8/16/2019 Product Guide_Power Generation Applications.pdf
25/28
At the heart of this process
is a strong desire to
exceed our customers’expectations by finding
outstanding solutions for
them and drawing upon the
company’s most valuable
asset – people. Over 80 %
of ComAp employees are
graduates with specialized
electronic and programming
knowledge appropriate to
the innovative development
of market-orientated
engine management
systems. This unique
know-how is matched
by ComAp’s significant
investment at every stage of the research and development
process, resulting in the creation of leading edge modern
development facilities. ComAp consistently set high
standards, reflected by our achievement in the ‘Best
Employers Study in the Czech Republic‘ (conducted by
Hewitt Associates), where we were awarded first place in
2008 following our consecutive third places in both 2006
and 2007.
ComAp Systems
ComAp’s expertise extends beyond innovative controllers
to include a range of subsidiary businesses specializing
in related services including bi-fuel conversions, power
energy systems solutions and gas engine management.
These subsidiaries are located in key strategic regions
around the world ensuring our customers benefit f rom
local capability coupled with global reach. Most of them are
named ComAp Systems and more information is availableon each business at www.comapsystems.com.
93
Key Milestones
1991
Establishment of ComAp.
1993
Successful commissioning of four
Gen-set Control Systems made by ComAp on
Mediterranean islands.
1994MX controller, the second generation of
ComAp’s gen-set control systems, was
launched.
1996PX, the revolutionary gen-set controller
with configurable input and outputs, was
developed.
1999The strategic co-operation with HuegliTech
Company significantly increased our
distribution network.
2000
InteliGen, the first member of the Inteli family
and flagship of our gen-set control systems,
was released.
2001ComAp Ltd. – 100 % UK based ComAp
subsidiary was established close to Bristol.
2002InteliSys, our top end product dedicated to
CHP and large engine control applications, was
released. New mid-range product InteliLite was
launched for AMF and MRS applications.
2004InteliDrive controller for non gen-set, engine
driven applications was released.
2006ComAp LLC – ComAp subsidiary to promote
products in the USA and Canada.
2007InteliVision – the first color display unit in
power generation field.
2008InteliCompact – controller for simple
paralleling gensets.
8/16/2019 Product Guide_Power Generation Applications.pdf
26/2894
Professional partnerships
ComAp products are directly available in more than 60 countries, spanning almost every continent in the world. Through our
professional and highly dedicated global distributor network we can satisfy customers’ needs, however challenging.
Each ComAp distributor is carefully selected for their professionalism, product exper tise and recognized quality standards and
accreditation, and as such can advise customers on any matter relating to ComAp products and their applications.
For detail information about the distributors, p lease visit www.comap.cz/distributors
AlgeriaH-T-Fwww.h-t-f.fr
ArgentinaSERVINTEL INTERNATIONAL S.A.www.servintel.com
AustraliaGREENBIRD TECHNOLOGYwww.greenbird.com.au
AustriaHUEGLI TECH AG (LTD)www.huegli-tech.com
BangladeshCOMAPwww.comap.cz
Bosnia andHerzegovina
KOCH D.O.O.www.koch.ba
BrazilSERVINTEL INTERNATIONAL S.Awww.servintel.com
BulgariaCOMAPwww.comap.cz
CanadaCOMAP LLCwww.comapllc.com
ChileSERVINTEL INTERNATIONAL S.A.www.servintel.com
ChinaJONES ENGINEERING CO., LTD.www.jones.com.hk
ColombiaSOLUCIONES PRODUCTIVASwww.powergen.com.co
Costa RicaPROPACE INGENIERIA, S.Awww.propace.net
CroatiaKOCH D.O.O.www.koch.ba
DenmarkPTECHwww.ptech.dk
East TimorGREENBIRD TECHNOLOGY www.greenbird.com.au
EcuadorSVF ECUADOR S.A.www.svf-international.com
EgyptPOWER FOR CONTRACTING & ELECTRO.www.elmotahdagroup.com
EstoniaTAPIMEC OY www.tapimec.fi
Faroe IslandsPTECHwww.ptech.dk
FinlandTAPIMEC OY www.tapimec.fi
FranceH-T-Fwww.h-t-f.fr
GermanyHUEGLI TECH AG (LTD)www.huegli-tech.com
GreeceA. SAPOUNAS S.A.www.sapounas.gr
GreenlandPTECHwww.ptech.dk
Hong KongJONES ENGINEERING CO., LTD.www.jones.com.hk
IndiaMADHURA INTERNATIONALwww.madhura.net
IndonesiaPT. FS POWER CONTROLwww.fspowercontrol.com
IraqCOMAPwww.comap.cz
IrelandINDUSTRIAL POWER UNITS LTD.www.ipu.co.uk
IsraelGENERKAL INDUSTRIES LTD.www.generkal.co.il
ItalyBIMOTOR S.R.L.www.bimotor.it
KazakhstanCOMAP SYSTEMS RUwww.comapsystems.ru
KuwaitCOMAPwww.comap.cz
LatviaCOMAPwww.comap.cz
LebanonJABBOUR DATAKOM S.A.R.L.www.jabbourpower.com
LithuaniaCOMAPwww.comap.cz
LuxembourgCONTROLIN BVwww.controlin.nl
MacedoniaKOCH D.O.O.www.koch.ba
MalaysiaSUNPOWER ENGINEERING & ENT.sunpower.ee@gmail.com
MexicoDUPONT ELEKTRIC MEXICO, SA DE CVwww.dwppon.com
MongoliaCOMAPwww.comap.cz
NetherlandsCONTROLIN BVwww.controlin.nl
New ZealandGREENBIRD TECHNOLOGYwww.greenbird.com.au
NigeriaMIKANO INTERNATIONAL LIMITEDwww.mikano-intl.com
NorwayINDUSTRIMARIN ASwww.industrimarin.com
PakistanR.A. ENGINEERING & SERVICESwww.raeng.com
Papua NewGuinea
GREENBIRD TECHNOLOGY www.greenbird.com.au
PeruCOMAPwww.comap.cz
PhilippinesSTATIC POWER PHILIPPINES, INC.hajji.isyte@gmail.com
PolandBTH FASTwww.bthfast.eu
PortugalGENCONTROL SYSTEMS, S.A.www.gencontrol.es
RomaniaCOMAPwww.comap.cz
RussiaCOMAP SYSTEMS RUwww.comapsystems.ru
Serbia andMontenegro
KOCH D.O.O.www.koch.ba
SingaporeCOMAPwww.comap.cz
South AfricaCOMAPwww.comap.cz
South KoreaBOO YOUNG CORPORATIONwww.boo-young.com
South KoreaEMECS ENGINEERINGwww.emecs.co.kr
SpainGENCONTROL SYSTEMS, S.A.www.gencontrol.es
Sri LankaCOMAPwww.comap.cz
SwedenINDUSTRIMARIN SVERIGE ASwww.industrimarin.com
SwitzerlandHUEGLI TECH AG (LTD)www.huegli-tech.com
TaiwanARITH COMPANY LTD.www.arith.com.tw
TunisiaH-T-Fwww.h-t-f.fr
TurkeyBETEX ENGINEERING IMPORT & EXPORTwww.betex.com.tr
UnitedKingdom
INDUSTRIAL POWER UNITS LTD.www.ipu.co.uk
UnitedStates
COMAP LLCwww.comapllc.com
UruguaySERVINTEL INTERNATIONAL S.A.www.servintel.com.ar
VietnamDP CONSULTING CO., LTD.www.dp-consulting.com.vn
http://www.comap.cz/distributorshttp://www.comap.cz/distributors
8/16/2019 Product Guide_Power Generation Applications.pdf
27/28
8/16/2019 Product Guide_Power Generation Applications.pdf
28/28
ComAp, spol. s r. o.
Kundratka 2359/17 • 180 00 Praha 8 • Czech Republic
Phone: + 420 246 012 111 • Fax: + 420 266 316 647
info@comap.cz • www.comap.cz
Manufacturer
Local Distributor / Partner
Customer satisfaction is our mission. We continuously develop the best people to succeed in our mission.
We are looking
forward to your visit.
mailto:info@comap.czhttp://www.comap.cz/mailto:info@comap.czhttp://www.comap.cz/