Post on 17-Feb-2017
transcript
Radiator Testing Equipments
Our product range of testing equipments
Automobile Testing
Filter Testing
Radiator Testing
FECR
Word Class Testing Equipments An ISO 9001 Certified Co.
Dear Sir, We are happy to inform you that we are the leading manufacturer of “World Class Radiator Testing Equipments” in north India. We are the single source for complete range of Radiator with allied products like Filter Testing Equipments & Automobile Testing Equipments.
These five tests are not the end be all for testing your radiator. More to come in regard to testing other radiator materials beside cartons and boxes, and also how to check these materials when you’re in the factory.
?All Structure made from M.S square piper and covered with G.I.Epoxy paint inner chamber made from S.S-304 Garde
?Radiators are leak tested at 138k Pa to a 4.2 cm limit. The FEC Controls the test cycle with temperature compensation over a range of +/-10 deg F. Also adjustable variable pressure
?Flexible Fixturing accommodates a range of different radiator models and sizes.
?FEC has the know how to manage flexible part movements and inherent
part dynamics through unique leak detection and fixture design expertise.
?Instrument Constucted with S.S - 304 grade Water Tank?Pneumatic operated with Timer controlled?Equipments made as per National and International Test Method.?Easy loading of radiator and penumatic
The FEC Salt spray chamber tester has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions.Double walled (Stainless steel 316 Inside & Outside G. I. Duly power caoted
Leakage Tester
Corrosion Resistance Test Chamber
Vibration Tester
This test methods describe laboratory testing of Radiator to prove their mechanical integrity. Radiator are tested to determine the pressure Impulse of the housing materials and construction. This test simulate conditions of engine lubrication system cyclic pressure pulsation. The test condition value should correspond with those actually measured on the intended engine applicable when such information is available.
Impulse Test Rig
Specially designed inert material atomizers of standard orifice produce the salt spray with air from a motorized compressor of suitable capacity. The air pressure for spraying and agitation of salt solution can be adjusted by means of precision control valves.
A separate control panel fitted with all electrical, pressure gauges, temps. Indicator, hour meter etc. has been provided for easy operation of the equipment
We are proud of continual support of our customer and feel honored to be associated with them since their inception. We appreciate the confidence of our customers in our quality and performance.
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com Website - www.fecproduct.com
Our Valued Customers