• destroys rust in the core

• can be painted over with 1- of 2

component primer

• gives good adhesion to coating

• removes ruststreaks and grinderdust

• removes lime scale

• has no adverse effect on the quality ofsteel, coating, rubber and gelcoat (grp)

• fast, easy and effective

• 1 liter per 10m2 rust treatment

• can be apllied on steel, stainless steel,chroom, gelcoat and coating

• do not use on cement, marble, stoneand antifouling.

after

Ranex Rustbuster converts rust from a detrimental oxide to a beneficial fosphate of iron. After the drying process (24 hours) the rust is completely destroyed and the surface is ready to be coated with each 1- or 2 component primer. Recommended not use waterbased and sinc-rich coatings. .

Without coating, the Ranex Rustbuster treated surfaceis protected during a few weeks by sulphate.

RANEX RUSTBUSTERINDUSTRIAL STRENGTH

before

Dealer:

Durable for materials and coating by professionals

RANEX RUSTBUSTERThe metal care solution

Importeur Ranex RustbusterIndustrial StrengthThe NetherlandsTelefoon: +31 655308639E. info@ranexrustbuster.nlW. www.ranexrustbuster.nl

Ranex RustbusterThe metal care solution

Available in 1 LITER, 4 LITERSand 20 LITERS

The benefits

With a density of 1.4 Ranex Rustbuster penetratesdeep into the surface to destroy rust. As a result therust is made inactive from the inside. By the lowsurface tension Ranex Rustbuster reaches the hard-to-reach areas.

• Government

• Marine

• Offshore

• Shipbuilding

• Fishery industry

• Public transport

• Pleasure boating

• Cleaning companies

• Renovation projects

Ranex Rustbuster is easy in use, it works fast, efficientand throuroughly. Ranex Rusbuster has a chemicalcompound on rust and lime, but has no adverseeffects on materials and coating. The residualproduct is an inactive substance, a beneficialphosphate of iron.

RANEX RUSTBUSTER is used in and by:

How it works

Conclusion

The metal care solution

Chemical surface (rust) treatmentunderwater hull tug

Treated with Ranex Rustbuster,chemically destroying any rust presentand leaving the surface in a suitablecondition for coating when completelydry (24 hours)

Over Ranex Rustbuster

• Application on:

• steel, stainless steel, chroom

• coating, gelcoat (GRP)

• rubber, glas

Ranex RustbusterRustSteelTreated surfaceready for coating

Chemical surface treatment is fast and eco-friendlyto perform.

The most important advantages are the efficient andhigh quality operation and even a temporaryconservation in one treatment.

Removing rust by a chemical process is a fast, easyand effective way and a very good alternative forblasting and sanding.

Over more than 50 yearsexperience in the fight against rust

before the process after