Results Review of Microphone Prototype and LabView Detecting of Human Errors Algorithm

Post on 16-Apr-2017

129 views 0 download

transcript

Results Review of Microphone Prototype and LabView Detecting of Human Errors Algorithm

Author: Minh Anh NguyenColorado State University

School of Biomedical and Electrical EngineeringEmail: minhanhnguyen@q.com

Outline of the review• Update on tasks from the previous

meeting• Microphone prototype• LabView Results for detecting

methods/algorithms for audio files

Update on labView

• Need: Vision and Motion package to analyze the images

• Issue: – The Vision and Motion programming/function

package is missing or not available for the Labview 2014 and NI myRio software

• This issue is resolved

Image test• Simulation mode– Make sure image files are loaded into the workspace

without any issues.– Make sure a correct file is loaded– Plot histogram of the image– Verify that the histogram value is correct.– Positive test: load two image files which have 2

different images and verify that the test results show the difference.

– Negative test: load two image files which have 2 similar images and verify that the test results show the same thing or match.

Labview results for comparing two images which are identical

LabView results for comparing two images which are not identical

LabView results for comparing two images which are not identical

Audio test• Simulation mode– Make sure audio files are loaded into the workspace

without any issues.– Plot and listen to audio files; make sure a correct file is

loaded.– Verify that the FFT value is correct.– Positive test: load two audio files which have 2

different signals and verify that the test results show the difference.

– Negative test: load two audio files which have 2 similar signals and verify that the test result show the same thing or match.

Microphone prototype for correct setting

LabView results for comparing two audio files which are identical

Microphone prototype for hex pin not popped out

Result of hex pin not popped out after executing the device for 1 min

LabView results for comparing two audio files (hex pin) which are not identical

Microphone prototype for upper arm not correctly set

LabView results for comparing two audio files (upper arm) which are not identical

Microphone prototype for upper arm not correctly set

LabView results for comparing two audio files (upper arm) which are not identical

Microphone prototype for lower bearing not correctly set

LabView results for comparing two audio files (lower bearing) which are not identical