Post on 28-Nov-2014
transcript
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 1
Reverse Transport Mechanism in
SAP BI
Applies to:
SAP Net Weaver 2004s BI 7.0 Ehp1 SP 08. For more information, visit the EDW homepage
Summary
This document helps you to understand the detailed step by step procedure in implementing
the Reverse Transport from production system to development system.
Author: Surendra Kumar Yadla
Company: Infosys Limited
Created on: 21 September 2011
Author Bio
The author has been associated with Infosys Limited, for 3 years with around 6 years experience in SAP BI. He has been involved in an end-to-end implementation of SAP BI 7.0 and upgrade of support pack for a renowned client
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 2
Table of Contents
Introduction ......................................................................................................................................................... 3
Scenario 1: ...................................................................................................................................................... 3
Scenario 2: ...................................................................................................................................................... 3
Advantages: ........................................................................................................................................................ 3
Disadvantages: ................................................................................................................................................... 3
Step by step procedure for Reverse Transport: ................................................................................................. 4
Related Content ................................................................................................................................................ 11
Disclaimer and Liability Notice .......................................................................................................................... 12
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 3
Introduction
This document helps you to understand the detailed step by step procedure in implementing
the Reverse Transport. It also includes different scenarios where we can implement a Reverse
Transport and the advantages and disadvantages of implementing.
Note: Reverse Transport is generally not advisable as there is a risk that some of the objects might get overwritten. But
in some rare situations we can go for this provided care must be taken so that no changes are overwritten.
Scenario 1:
In some cases Users will create adhoc queries directly in Production system for testing
purpose. In order to save some development effort, rather than re-creating of these queries in
development, we can implement Reverse Transport mechanism for these queries from
Production to Development.
Scenario 2:
In some cases where the client is having multiple landscape for development and quality
usually, client copy will be done periodically i.e., development /quality systems will be synched
with Production system. Let’s assume that development system is synched with Production
system and there were some changes done in Development and they were overwritten by the
sync, then if those changes were already transported to Quality, we can Reverse Transport
those changes from Quality system to Development system or we can do reversal of transport
instead of doing the changes manually.
Advantages:
In the case of adhoc queries created in Production, instead of recreating the queries in
Development, we can do reverse Transport them and this reduces the effort and time in
case of complex queries.
If some changes were overwritten by sync up, we can get back the changes through
Reverse Transport.
Disadvantages:
Reverse transport is not advisable as some changes already done in Development might
be overwritten, if extra cautious not taken.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 4
Step by step procedure for Reverse Transport:
Consider a ‘Y’ query which was created in Production system and it has to be Reverse
transported to Development System:
Go to Transaction SCC4 in Production System
Make the necessary settings in the source system for collecting transports. This will be done by
the basis team.
Before:
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 5
After:
Get the required authorizations for the particular User ID.
A Package should already be present in the Production System to include the ‘Y’ Query. If not
create a package in Development and transport it to Production System.
Steps to create a package:
a) Go to Transaction SE80 -> Repository Browser:
b) Select Package from the drop down list and then give the Package name which
you want to create.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 6
c) Click on the ‘Display’ button. It will prompt to create object as shown below:
d) Click on Yes. The below screen will pop up:
e) Give the Description and Application Component and give Package Type as ‘Not
a Main Package’. Then click on ‘Create’.
f) It will prompt for a Transport Request. Include the Package in a new TR and
save it as shown below:
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 7
g) Transport the Package to Production System.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 8
Create a new Transport Request in the Production system and collect the Y query in that
Transport Request and include it in the above created Package.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 9
Release the Transport Request.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 10
Go to Target system -> Import Queue and Import the Request as you normally do.
Validate the imported Objects by comparing with production system to verify if the objects
have been transported properly or not.
After completing the above step, revert the system changes to as before in SCC4.
After importing the query to development system, change the technical name of the query as
per the naming standard and transport to the production system by standard transport
mechanism.
Now delete the Y query created in both Production and Development Systems.
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 11
Related Content
http://help.sap.com
http://www.sdn.sap.com
http://www.bw-biexpertonline.com
Reverse Transport Mechanism in SAP BI
SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BA - boc.sap.com | UAC - uac.sap.com
© 2011 SAP AG 12
Disclaimer and Liability Notice
This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not supported by SAP. Changes made based on this information are not supported and can be overwritten during an upgrade.
SAP will not be held liable for any damages caused by using or misusing the information, code or methods suggested in this document, and anyone using these methods does so at his/her own risk.
SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample, including any liability resulting from incompatibility between the content within this document and the materials and services offered by SAP. You agree that you will not hold, or seek to hold, SAP responsible or liable with respect to the content of this document.