Reversing LCD MonitorsReversing LCD Monitors

ClearViewClearViewClearViewClearViewClearViewClearViewClearViewClearView

With a ClearView LCD colour monitor on the dashboard and the camera at the back of

your vehicle, you have everything in sight - up to 80 per cent more view compared to

conventional mirrors. As soon as you select reverse gear, the camera and monitor

switch on automatically. (May also be used for forward or interior view with monitors with

2 AV inputs)

Cosmetic appearances may change without notice

The LCD250P is a versatile 2.5 inch LCD colour monitor.

This unobtrusive monitor is supplied with a pedestal

mounting which can be detached to allow the monitor to be

fixed onto a suitable flat surface. Included is a double sided

adhesive pad. Picture is pre-set and is non-adjustable.

1 x AV input

The LCD355P is a 3.5 inch dashboard mounted LCD colour

monitor. The pedestal can be detached to allow flat surface

fixing. Supplied with a remote control to adjust picture quality,

AV input and orientation.

2 x AV inputs. 2nd input can be used as a DVD screen or

connected to any other video source.

The LCD600M clips over your existing rear view mirror and

contains a 6” LCD colour monitor. During normal use, it acts

and looks just like an interior mirror. When reverse gear is

selected, the left portion of the mirror automatically becomes

the LCD screen.

Picture quality, orientation and AV input can be selected from

the monitors control buttons or by the supplied remote. 2 x

AV inputs.

The LCD700P is a 7.0 inch LCD TFT colour monitor. Available

with both a pedestal mounting bracket and a framing bezel for

flush mounting. Can also be used as a DVD headrest monitor.

2 x AV inputs for either a second camera or a DVD/video

screen. Push button and remote controlled.

Two Monitors in One

• It’s a reversing monitor, or

• It’s a headrest DVD monitor

or both !

Headrest shown not included